-Summary: dxr3 and h+ driver
-Summary(pl): sterowniki dla dxr3 i h+
+# Conditional build:
+%bcond_without dist_kernel # without distribution kernel
+%bcond_without kernel # don't build kernel modules
+%bcond_without smp # don't build SMP module
+%bcond_without userspace # don't build userspace tools
+%bcond_with verbose # verbose build (V=1)
+#
+Summary: DXR3 and H+ driver
+Summary(pl): Sterowniki dla DXR3 i H+
Name: em8300
-Version: 0.12.0
-Release: 0
+Version: 0.15.2
+Release: 0.1
License: GPL
-Group: Base/Kernel
-Source0: http://dxr3.sourceforge.net/download/%{name}-%{version}.tar.gz
+Group: Applications/System
+Source0: http://dl.sourceforge.net/dxr3/%{name}-%{version}.tar.gz
+# Source0-md5: c203eade5e6002d279d50cae4a947964
+Source1: %{name}.init
+Source2: %{name}.sysconf
+Patch0: %{name}-make.patch
URL: http://dxr3.sourceforge.net/
-Provides: dxr3
-Requires(post,postun): /sbin/ldconfig
-Requires(post,postun): /sbin/depmod
-BuildRequires: kernel-headers
+%if %{with userspace}
BuildRequires: autoconf
BuildRequires: automake
-BuildRequires: libtool
-BuildRequires: gtk+-devel
+BuildRequires: gtk+-devel >= 1.2.0
+%endif
+%if %{with kernel} && %{with dist_kernel}
+BuildRequires: kernel-headers
+BuildRequires: rpmbuild(macros) >= 1.118
+%endif
+Requires(post,preun): /sbin/chkconfig
+Provides: dxr3
+Obsoletes: em8300-libs
BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
-%define _xbindir %{_prefix}/X11R6/bin
-
%description
-
-em8300 is a Linux driver for Creative DXR3 and Sigma Designs Hollywood+
-cards. Both cards are hardware MPEG1, MPEG2, AC3 decoders. Additionaly
-Xine and MPlayer with help of this driver allow you to play all
-the video formats that they recognise through the tv-out of these cards.
+em8300 is a Linux driver for Creative DXR3 and Sigma Designs
+Hollywood+ cards. Both cards are hardware MPEG1, MPEG2, AC3 decoders.
+Additionaly Xine and MPlayer with help of this driver allow you to
+play all the video formats that they recognise through the tv-out of
+these cards.
%description -l pl
-
-em8300 pozwala na uruchomienie pod Linuksem kart Creative DXR3
-i Sigma Designs Hollywood+. Obie karty, o prawie identycznej konstrukcji
-s± sprzêtowymi dekoderami MPEG1, MPEG2 i AC3. Programy Xine i MPlayer
+em8300 pozwala na uruchomienie pod Linuksem kart Creative DXR3 i Sigma
+Designs Hollywood+. Obie karty, o prawie identycznej konstrukcji s±
+sprzêtowymi dekoderami MPEG1, MPEG2 i AC3. Programy Xine i MPlayer
pozwalaj± przy u¿yciu tego sterownika na odtwarzanie przez wyj¶cie
telewizyjne tych kart nie tylko w/w formatów, ale tak¿e wszystkich
formatów video, które te programy rozpoznaj±.
%package devel
-Summary: Files required to develop programs using em8300
-Summary(pl): Pliki potrzebne do tworzenia programów korzystaj±cych z em8300
-Group: Base/Kernel
-Requires: %{name} = %{version}
+Summary: Header file to communicate with em8300 Linux kernel modules
+Summary(pl): Plik nag³ówkowy do komunikacji z modu³ami j±dra Linuksa em8300
+Group: Development/Libraries
+Obsoletes: em8300-static
%description devel
-
-Header files and additional scripts useful for developers of
-em8300 apps.
+Header file to communicate with em8300 Linux kernel modules.
%description devel -l pl
-
-Pliki nag³ówkowe i skrypty przydatne dla autorów aplikacji
-korzystaj±cych z em8300.
+Plik nag³ówkowy do komunikacji z modu³ami j±dra Linuksa em8300.
%package gtk
-Summary: Utility programs for em8300 using gtk+
-Summary(pl): Programy u¿ytkowe em8300 u¿ywaj±ce bibliteki gtk+
-Group: Base/Kernel
-Requires: %{name} = %{version}
+Summary: Utility programs for em8300 using GTK+
+Summary(pl): Programy u¿ytkowe em8300 u¿ywaj±ce bibliteki GTK+
+Group: X11/Applications
+Requires: %{name} = %{version}-%{release}
%description gtk
-
-Utility programs for em8300 using gtk+ toolkit.
+Utility programs for em8300 using GTK+ toolkit.
%description gtk -l pl
+Programy u¿ytkowe em8300 u¿ywaj±ce biblioteki GTK+.
+
+%package -n kernel-video-em8300
+Summary: em8300 Linux kernel modules
+Summary(pl): Modu³y j±dra Linuksa em8300
+Group: Base/Kernel
+%{?with_dist_kernel:%requires_releq_kernel_up}
+Requires(post,postun): /sbin/depmod
-Programy u¿ytkowe em8300 u¿ywaj±ce biblioteki gtk+.
+%description -n kernel-video-em8300
+em8300 Linux kernel modules.
+
+%description -n kernel-video-em8300 -l pl
+Modu³y j±dra Linuksa em8300.
+
+%package -n kernel-smp-video-em8300
+Summary: em8300 Linux SMP kernel modules
+Summary(pl): Modu³y j±dra Linuksa SMP em8300
+Group: Base/Kernel
+%{?with_dist_kernel:%requires_releq_kernel_smp}
+Requires(post,postun): /sbin/depmod
+
+%description -n kernel-smp-video-em8300
+em8300 Linux SMP kernel modules.
+
+%description -n kernel-smp-video-em8300 -l pl
+Modu³y j±dra Linuksa SMP em8300.
%prep
-%setup -q
+%setup -q -n %{name}-%{version}
+%patch0 -p0
%build
-sh bootstrap
+%if %{with userspace}
+%{__aclocal} -I autotools
+%{__autoconf}
+%{__autoheader}
+%{__automake}
%configure
%{__make}
+%endif
+
+%if %{with kernel}
cd modules
-make
+for cfg in %{?with_dist_kernel:%{?with_smp:smp} up}%{!?with_dist_kernel:nondist}; do
+ if [ ! -r "%{_kernelsrcdir}/config-$cfg" ]; then
+ exit 1
+ fi
+ rm -rf include/{linux,config,asm}
+ install -d include/{linux,config}
+ ln -sf %{_kernelsrcdir}/config-$cfg .config
+ ln -sf %{_kernelsrcdir}/include/linux/autoconf-$cfg.h include/linux/autoconf.h
+%ifarch ppc ppc64
+ install -d include/asm
+ [ ! -d %{_kernelsrcdir}/include/asm-powerpc ] || ln -sf %{_kernelsrcdir}/include/asm-powerpc/* include/asm
+ [ ! -d %{_kernelsrcdir}/include/asm-%{_target_base_arch} ] || ln -snf %{_kernelsrcdir}/include/asm-%{_target_base_arch}/* include/asm
+%else
+ln -sf %{_kernelsrcdir}/include/asm-%{_target_base_arch} include/asm
+%endif
+ ln -sf %{_kernelsrcdir}/Module.symvers-$cfg Module.symvers
+ touch include/config/MARKER
+ cp ../include/linux/em8300.h include/linux/em8300.h
+
+ %{__make} -C %{_kernelsrcdir} clean \
+ RCS_FIND_IGNORE="-name '*.ko' -o" \
+ M=$PWD O=$PWD \
+ %{?with_verbose:V=1}
+ %{__make} -C %{_kernelsrcdir} modules \
+ CC="%{__cc}" CPP="%{__cpp}" \
+ M=$PWD O=$PWD \
+ %{?with_verbose:V=1}
+ for i in em8300 adv717x bt865; do
+ mv $i{,-$cfg}.ko
+ done
+done
+%endif
%install
rm -rf $RPM_BUILD_ROOT
-install -d $RPM_BUILD_ROOT
-
-%{__make} install DESTDIR=$RPM_BUILD_ROOT
-cd modules
-make install-newkern prefix=$RPM_BUILD_ROOT
-find $RPM_BUILD_ROOT/lib/modules -name "*.o" -print | sed s,$RPM_BUILD_ROOT,, >../mods.lst
-mv INSTALL INSTALL.modules
-install -d $RPM_BUILD_ROOT/%{_datadir}/misc
-install -m 644 em8300.uc $RPM_BUILD_ROOT/%{_datadir}/misc
-
-cd $RPM_BUILD_ROOT
-install -d ./%{_xbindir}
-mv ./%{_bindir}/* ./%{_xbindir}
-
-cd $RPM_BUILD_ROOT/usr/share
-install -m 755 em8300/microcode_upload.pl ../bin/em8300_microcode_upload
+%if %{with userspace}
+%{__make} install \
+ DESTDIR=$RPM_BUILD_ROOT
+
+install -D %{SOURCE1} $RPM_BUILD_ROOT/etc/rc.d/init.d/%{name}
+install -D %{SOURCE2} $RPM_BUILD_ROOT/etc/sysconfig/%{name}
+%endif
+
+%if %{with kernel}
+install -d $RPM_BUILD_ROOT/lib/modules/%{_kernel_ver}{,smp}/kernel/drivers/video
+for i in adv717x bt865 em8300; do
+ install modules/$i-%{?with_dist_kernel:up}%{!?with_dist_kernel:nondist}.ko \
+ $RPM_BUILD_ROOT/lib/modules/%{_kernel_ver}/kernel/drivers/video/$i.ko
+done
+%if %{with smp} && %{with dist_kernel}
+for i in adv717x bt865 em8300; do
+ install modules/$i-smp.ko \
+ $RPM_BUILD_ROOT/lib/modules/%{_kernel_ver}smp/kernel/drivers/video/$i.ko
+done
+%endif
+%endif
%clean
-rm -rf $RPM_BUILD_ROOT $RPM_BUILD_DIR/%{name}-%{version}
-
-%postun
-/sbin/ldconfig
-/sbin/depmod -a
+rm -rf $RPM_BUILD_ROOT
%post
-/sbin/ldconfig
-/sbin/depmod -a
-
-%files -f mods.lst
+/sbin/chkconfig --add %{name}
+if [ -f /var/lock/subsys/%{name} ]; then
+ /etc/rc.d/init.d/%{name} restart 1>&2
+else
+ echo "Run \"/etc/rc.d/init.d/%{name} start\" to load %{name} modules."
+fi
+
+%preun
+if [ "$1" = "0" ]; then
+ if [ -f /var/lock/subsys/%{name} ]; then
+ /etc/rc.d/init.d/%{name} stop 1>&2
+ fi
+ /sbin/chkconfig --del %{name}
+fi
+
+%post -n kernel-video-em8300
+%depmod %{_kernel_ver}
+
+%postun -n kernel-video-em8300
+%depmod %{_kernel_ver}
+
+%post -n kernel-smp-video-em8300
+%depmod %{_kernel_ver}smp
+
+%postun -n kernel-smp-video-em8300
+%depmod %{_kernel_ver}smp
+
+%if %{with userspace}
+%files
%defattr(644,root,root,755)
-%doc AUTHORS ChangeLog COPYING README
-%doc modules/README* modules/INSTALL* modules/devices.sh modules/devfs_symlinks
-%attr(755,root,root) %{_bindir}/*
-%attr(755,root,root) %{_datadir}/misc/*
-%attr(755,root,root) %{_libdir}/lib*.so.*
+%doc AUTHORS ChangeLog README modules/README*
+%attr(755,root,root) %{_bindir}/em8300setup
+/lib/firmware/em8300.bin
+%dir %{_datadir}/em8300
+%{_datadir}/em8300/em8300.pm
+%attr(755,root,root) %{_datadir}/em8300/*.pl
+%{_mandir}/man1/em8300setup.1*
+%attr(754,root,root) /etc/rc.d/init.d/%{name}
+%config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/%{name}
%files devel
%defattr(644,root,root,755)
-%attr(755,root,root) %dir %{_includedir}/libdxr3
-%attr(644,root,root) %{_includedir}/libdxr3/*
-%attr(644,root,root) %{_includedir}/linux/*
-%attr(755,root,root) %{_libdir}/lib*.so
-%attr(755,root,root) %{_libdir}/lib*.la
-%attr(755,root,root) %dir %{_datadir}/em8300
-%attr(755,root,root) %{_datadir}/em8300/*
+%{_includedir}/linux/em8300.h
%files gtk
%defattr(644,root,root,755)
-%attr(755,root,root) %{_xbindir}/*
+%attr(755,root,root) %{_bindir}/autocal
+%attr(755,root,root) %{_bindir}/dhc
+%attr(755,root,root) %{_bindir}/dxr3view
+%endif
+
+%if %{with kernel}
+%files -n kernel-video-em8300
+%defattr(644,root,root,755)
+/lib/modules/%{_kernel_ver}/kernel/drivers/video/*.ko*
+
+%if %{with dist_kernel} && %{with smp}
+%files -n kernel-smp-video-em8300
+%defattr(644,root,root,755)
+/lib/modules/%{_kernel_ver}smp/kernel/drivers/video/*.ko*
+%endif
+%endif
projects / packages / em8300.git / blobdiff