-# Woobie only serves as an example for module programming. No need to
-# compile it for normal bots ...
-woobie
-diff -burN eggdrop1.6.17.orig/eggdrop.conf.orig eggdrop1.6.17/eggdrop.conf.orig
---- eggdrop1.6.17.orig/eggdrop.conf.orig 2004-11-01 14:40:44.107455640 +0100
-+++ eggdrop1.6.17/eggdrop.conf.orig 1970-01-01 01:00:00.000000000 +0100
-@@ -1,1353 +0,0 @@
--#! /usr/bin/eggdrop
--# ^- This should contain a fully qualified path to your Eggdrop executable.
--#
--# $Id$
--#
--# This is a sample Eggdrop configuration file which includes all possible
--# settings that can be used to configure your bot.
--#
--# The pound signs (#) that you see at the beginning of some lines mean that
--# the remainder of that line is a comment, or just for your information. By
--# adding or deleting pound signs, you can comment or uncomment a setting,
--# respectively.
--#
--# Arguments for a command or setting may be inclosed in <>'s or []'s in the
--# example/description. Arguments in <>'s are required, while [] means optional.
--#
--# More detailed descriptions of all these settings can be found in
--# doc/settings/.
--
--
--
--##### BASIC SETTINGS #####
--
--# This setting defines the username the bot uses on IRC. This setting has
--# no effect if an ident daemon is running on your bot's machine.
--set username "lamest"
--
--# This setting defines which contact person should be shown in .status,
--# /msg help, and other places. You really should include this information.
--set admin "Lamer <email: lamer@lamest.lame.org>"
--
--# This setting is used only for info to share with others on your botnet.
--# Set this to the IRC network your bot is connected to.
--set network "I.didn't.edit.my.config.file.net"
--
--# This setting defines the timezone is your bot in. It's used for internal
--# routines as well as for logfile timestamping and scripting purposes.
--# The timezone string specifies the name of the timezone and must be three
--# or more alphabetic characters. For example, Central European Time(UTC+1)
--# should be "CET".
--set timezone "EST"
--
--# The offset setting specifies the time value to be added to the local
--# time to get Coordinated Universal Time (UTC aka GMT). The offset is
--# positive if the local timezone is west of the Prime Meridian and
--# negative if it is east. The value (in hours) must be between -23 and
--# 23. For example, if the timezone is UTC+1, the offset is -1.
--set offset "5"
--
--# If you don't want to use the timezone setting for scripting purposes only,
--# but instead everywhere possible, un-comment the following line.
--#set env(TZ) "$timezone $offset"
--
--# If you're using virtual hosting (your machine has more than 1 IP), you
--# may want to specify the particular IP to bind to. You can specify either
--# by hostname or by IP. You may also want to set the hostname here if
--# Eggdrop has trouble detecting it when it starts up.
--#set my-hostname "virtual.host.com"
--#set my-ip "99.99.0.0"
--
--# If you want to have your Eggdrop messages displayed in a language other
--# than English, change this setting to match your preference. An alternative
--# would be to set the environment variable EGG_LANG to that value.
--#
--# Languages included with Eggdrop: Danish, English, French, Finnish, German.
--#addlang "english"
--
--
--##### LOG FILES #####
--
--# Eggdrop is capable of logging various things, from channel chatter to
--# commands people use on the bot and file transfers. Logfiles are normally
--# kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
--# After 48 hours, they will be overwritten by the logfile of the next day.
--#
--# Events are logged by certain categories. This way, you can specify
--# exactly what kind of events you want sent to various logfiles.
--#
--# Logfile flags:
--# b - information about bot linking and userfile sharing
--# c - commands
--# d - misc debug information
--# h - raw share traffic
--# j - joins, parts, quits, and netsplits on the channel
--# k - kicks, bans, and mode changes on the channel
--# m - private msgs, notices and ctcps to the bot
--# o - misc info, errors, etc (IMPORTANT STUFF)
--# p - public text on the channel
--# r - raw incoming server traffic
--# s - server connects, disconnects, and notices
--# t - raw botnet traffic
--# v - raw outgoing server traffic
--# w - wallops (make sure the bot sets +w in init-server)
--# x - file transfers and file-area commands
--#
--# Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
--# also eight user-defined levels (1-8) which can be used by Tcl scripts.
--#
--# Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
--# are logged to whatever channel they happened on. Most other events are
--# currently logged to every channel. You can make a logfile belong to all
--# channels by assigning it to channel "*".
--
--# This is the maximum number of logfiles allowed. This setting can be
--# increased; however, don't decrease it.
--set max-logs 5
--
--# This is the maximum size of your logfiles. Set it to 0 to disable.
--# This value is in kilobytes, so '550' would mean cycle logs when it
--# reaches the size of 550 kilobytes. Note that this only works if you
--# have keep-all-logs 0 (OFF).
--set max-logsize 0
--
--# This could be good if you have had problem with the logfile filling
--# your quota/hard disk or if you log +p and publish it to the web and
--# need more up-to-date info. Note that this setting might increase the
--# CPU usage of your bot (on the other hand it will decrease your mem usage).
--set quick-logs 0
--
--# This setting allows you the logging of raw incoming server traffic via
--# console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
--# raw botnet traffic via console/log mode 't', and raw share traffic via
--# console/log mode 'h'. These flags can create a large security hole,
--# allowing people to see user passwords. This is now restricted to +n users
--# only. Please choose your owners with care.
--set raw-log 0
--
--# This creates a logfile named eggdrop.log containing private msgs/ctcps,
--# commands, errors, and misc. info from any channel.
--logfile mco * "logs/eggdrop.log"
--
--# This creates a logfile named lamest.log containing joins, parts,
--# netsplits, kicks, bans, mode changes, and public chat on the
--# channel #lamest.
--logfile jpk #lamest "logs/lamest.log"
--
--# Use this feature to timestamp entries in the log file.
--set log-time 1
--
--# If you want to keep your logfiles forever, turn this setting on. All
--# logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
--# Note that your quota/hard-disk might be filled by this, so check your
--# logfiles often and download them.
--set keep-all-logs 0
--
--# If keep-all-logs is 1, this setting will define the suffix of the logfiles.
--# The default will result in a suffix like "04May2000". "%Y%m%d" will produce
--# the often used yyyymmdd format. Read the strftime manpages for more options.
--# NOTE: On systems which don't support strftime, the default format will
--# be used _always_.
--set logfile-suffix ".%d%b%Y"
--
--# You can specify when Eggdrop should switch logfiles and start fresh. You
--# must use military time for this setting. 300 is the default, and describes
--# 03:00 (AM).
--set switch-logfiles-at 300
--
--# "Writing user file..." and "Writing channel file..." messages won't be
--# logged anymore if this option is enabled.
--set quiet-save 0
--
--
--##### CONSOLE #####
--
--# This is the default console mode. It uses the same event flags as the log
--# files do. The console channel is automatically set to your "primary" channel,
--# which is set in the modules section of the config file. Masters can change
--# their console channel and modes with the '.console' command.
--
--set console "mkcobxs"
--
--
--##### FILES AND DIRECTORIES #####
--
--# Specify here the filename your userfile should be saved as.
--set userfile "LamestBot.user"
--
--# Specify here the filename Eggdrop will save its pid to. If no pidfile is
--# specified, pid.(botnet-nick) will be used.
--#set pidfile "pid.LamestBot"
--
--# If you want your userfile to be sorted upon saving, enable this setting.
--# This causes the bot to use bit more CPU when saving the usefile.
--set sort-users 0
--
--# Specify here where Eggdrop should look for help files. Don't modify this
--# setting unless you know what you're doing!
--set help-path "/usr/share/eggdrop/help/"
--
--# Specify here where Eggdrop should look for text files. This is used for
--# certain Tcl and DCC commands.
--set text-path "/usr/share/eggdrop/"
--
--# Set here a place to store temporary files.
--set temp-path "/tmp"
--
--# The MOTD (Message Of The day) is displayed when people dcc chat or telnet
--# to the bot. Look at doc/TEXT-SUBSTITUTIONS for options.
--set motd "/usr/share/eggdrop/motd"
--
--# This banner will be displayed on telnet connections. Look at
--# doc/TEXT-SUBSTITUTIONS for options.
--set telnet-banner "/usr/share/eggdrop/banner"
--
--# This specifies what permissions the user, channel, and notes files should
--# be set to. The octal values are the same as for the chmod system command.
--#
--# To remind you:
--#
--# u g o u g o u g o
--# 0600 rw------- 0400 r-------- 0200 -w------- u - user
--# 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
--# 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
--#
--# Note that the default 0600 is the most secure one and should only be changed
--# if you need your files for shell scripting or other external applications.
--set userfile-perm 0600
--
--
--##### BOTNET/DCC/TELNET #####
--
--# Settings in this section should be unimportant for you until you deal
--# with botnets (multiple Eggdrops connected together to maximize efficiency).
--# You should read doc/BOTNET before modifying these settings.
--
--# If you want to use a different nickname on the botnet than you use on
--# IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
--# and set it to the nick you would like to use.
--#set botnet-nick "LlamaBot"
--
--# This opens a telnet port by which you and other bots can interact with the
--# Eggdrop by telneting in.
--#
--# There are more options for the listen command in doc/tcl-commands.doc. Note
--# that if you are running more than one bot on the same machine, you will want
--# to space the telnet ports at LEAST 5 apart, although 10 is even better.
--#
--# Valid ports are typically anything between 1025 and 65535 assuming the
--# port is not already in use.
--#
--# If you would like the bot to listen for users and bots in separate ports,
--# use the following format:
--#
--# listen 3333 bots
--# listen 4444 users
--#
--# If you wish to use only one port, use this format:
--#
--# listen 3333 all
--#
--# You need to un-comment this line and change the port number in order to open
--# the listen port. You should not keep this set to 3333.
--#listen 3333 all
--
--# This setting defines whether or not people can boot users on the Eggdrop
--# from other bots in your botnet. Valid settings are:
--# 0 - allow *no* outside boots
--# 1 - allow boots from sharebots
--# 2 - allow any boots
--set remote-boots 2
--
--# This setting prohibits remote bots from telling your Eggdrop to unlink from
--# share bots.
--set share-unlinks 1
--
--# This setting will drop telnet connections not matching a known host. It
--# greatly improves protection from IRCops, but makes it impossible to add
--# hosts on limbo (NOIRC) bots or have NEW as a valid login.
--set protect-telnet 0
--
--# This setting will make the bot ignore DCC chat requests which appear to
--# have bogus information on the grounds that the user may have been trying
--# to make the bot connect to somewhere that will get it into trouble, or
--# that the user has a broken client (like mIRC tends to do), in which case
--# the connect wouldn't work anyway. It's suggested that you turn this on.
--set dcc-sanitycheck 0
--
--# This settings defines a time in seconds that the bot should wait before
--# a dcc chat, telnet, or relay connection times out.
--set ident-timeout 5
--
--# Define here whether or not a +o user still needs the +p flag to dcc the bot.
--set require-p 0
--
--# If you want people allow to telnet in and type 'NEW' to become a new user,
--# set this to 1. This is similar to the 'hello' msg command. The protect-telnet
--# setting must be set to 0 to use this.
--set open-telnets 0
--
--# If you don't want Eggdrop to identify itself as an eggdrop on a telnet
--# connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
--set stealth-telnets 0
--
--# If you want Eggdrop to display a banner when telneting in, set this setting
--# to 1. The telnet banner is set by 'set telnet-banner'.
--set use-telnet-banner 0
--
--# This settings defines a time in seconds that the bot should wait before
--# a dcc chat, telnet, or relay connection times out.
--set connect-timeout 15
--
--# Specify here the number of lines to accept from a user on the partyline
--# within 1 second before they are considered to be flooding and therefore
--# get booted.
--set dcc-flood-thr 3
--
--# Define here how many telnet connection attempts in how many seconds from
--# the same host constitute a flood. The correct format is Attempts:Seconds.
--set telnet-flood 5:60
--
--# If you want telnet-flood to apply even to +f users, set this setting to 1.
--set paranoid-telnet-flood 1
--
--# Set here the amount of seconds before giving up on hostname/address
--# lookup (you might want to increase this if you are on a slow network).
--set resolve-timeout 15
--
--
--##### MORE ADVANCED SETTINGS #####
--
--# Set this to your socks host if your Eggdrop sits behind a firewall. If
--# you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
--#set firewall "!sun-barr.ebay:3666"
--
--# If you have a NAT firewall (you box has an IP in one of the following
--# ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
--# 10.0.0.0-10.255.255.255 and your firewall transparently changes your
--# address to a unique address for your box) or you have IP masquerading
--# between you and the rest of the world, and /dcc chat, /ctcp chat or
--# userfile sharing aren't working, enter your outside IP here. Do not
--# enter anything for my-ip or my-hostname if you use this setting.
--#set nat-ip "127.0.0.1"
--
--# If you want all dcc file transfers to use a particular portrange either
--# because you're behind a firewall, or for other security reasons, set it
--# here.
--#set reserved-portrange 2010:2020
--
--# Set the time in minutes that temporary ignores should last.
--set ignore-time 15
--
--# Define here what Eggdrop considers 'hourly'. All calls to it, including such
--# things as note notifying or userfile saving, are affected by this.
--# For example:
--#
--# set hourly-updates 15
--#
--# The bot will save its userfile 15 minutes past every hour.
--set hourly-updates 00
--
--# Un-comment the next line and set the list of owners of the bot.
--# You NEED to change this setting.
--#set owner "MrLame, MrsLame"
--
--# Who should a note be sent to when new users are learned?
--set notify-newusers "$owner"
--
--# Enter the flags that all new users should get by default. See '.help whois'
--# on the partyline for a list of flags and their descriptions.
--set default-flags "hp"
--
--# Enter all user-defined fields that should be displayed in a '.whois'.
--# This will only be shown if the user has one of these extra fields.
--# You might prefer to comment this out and use the userinfo1.0.tcl script
--# which provides commands for changing all of these.
--set whois-fields "url birthday"
--
--# Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
--# kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
--set die-on-sighup 0
--
--# Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
--# kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
--set die-on-sigterm 1
--
--# Comment these two lines if you wish to enable the .tcl and .set commands.
--# If you select your owners wisely, you should be okay enabling these.
--unbind dcc n tcl *dcc:tcl
--unbind dcc n set *dcc:set
--
--# If you enable this setting, only permanent owners (owner setting) will be
--# able to use .tcl and .set. Moreover, if you want only let permanent owners
--# use .dump, then set this to 2.
--set must-be-owner 1
--
--# Comment out this line to add the 'simul' partyline command (owners can
--# manipulate other people on the party line). Please select owners wisely
--# and use this command ethically!
--unbind dcc n simul *dcc:simul
--
--# Set here the maximum number of dcc connections you will allow. You can
--# increase this later, but never decrease it.
--set max-dcc 50
--
--# Enable this setting if you want +d & +k users to use commands bound as -|-.
--set allow-dk-cmds 1
--
--# If your Eggdrop rejects bots that actually have already disconnected from
--# another hub, but the disconnect information has not yet spread over the
--# botnet due to lag, use this setting. The bot will wait dupwait-timeout
--# seconds before it checks again and then finally reject the bot.
--set dupwait-timeout 5
--
--# You MUST remove this line for your bot to start. This has been added to
--# prevent you from starting up a bot that is not fully configured. Bots
--# that have not been fully configured may join the wrong IRC network, the
--# wrong channels, or generally do things that you do not want. Please make
--# sure that you have double-checked every setting. There's also a similar line
--# lower down, just to make sure you're reading :)
--die "Please make sure you edit your config file completely."
--
--
--##### MODULES #####
--
--# Below are various settings for the modules included with Eggdrop.
--# PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
--# Eggdrop, things change.
--
--# This path specifies the path were Eggdrop should look for its modules.
--# If you run the bot from the compilation directory, you will want to set
--# this to "". If you use 'make install' (like all good kiddies do ;), this
--# is a fine default. Otherwise, use your head :)
--set mod-path "/usr/lib/eggdrop/modules/"
--
--
--#### DNS MODULE ####
--
--# This module provides asynchronous dns support. This will avoid long
--# periods where the bot just hangs there, waiting for a hostname to
--# resolve, which will often let it timeout on all other connections.
--loadmodule dns
--
--
--#### CHANNELS MODULE ####
--
--# This module provides channel related support for the bot. Without it,
--# you won't be able to make the bot join a channel or save channel
--# specific userfile information.
--loadmodule channels
--
--# Enter here the filename where dynamic channel settings are stored.
--set chanfile "LamestBot.chan"
--
--# Set this setting to 1 if you want your bot to expire bans/exempts/invites set
--# by other opped bots on the channel.
--set force-expire 0
--
--# Set this setting to 1 if you want your bot to share user greets with other
--# bots on the channel if sharing user data.
--set share-greet 0
--
--# Set this setting to 1 if you want to allow users to store an info line.
--set use-info 1
--
--# The following settings are used as default values when you .+chan #chan or .tcl
--# channel add #chan. Look in the section below for explanation of every option.
--
--set global-flood-chan 10:60
--set global-flood-deop 3:10
--set global-flood-kick 3:10
--set global-flood-join 5:60
--set global-flood-ctcp 3:60
--set global-flood-nick 5:60
--set global-aop-delay 5:30
--set global-idle-kick 0
--set global-chanmode "nt"
--set global-stopnethack-mode 0
--set global-revenge-mode 0
--set global-ban-time 120
--set global-exempt-time 60
--set global-invite-time 60
--
--set global-chanset {
-- -autoop -autovoice
-- -bitch +cycle
-- +dontkickops +dynamicbans
-- +dynamicexempts +dynamicinvites
-- -enforcebans +greet
-- -inactive -nodesynch
-- -protectfriends +protectops
-- -revenge -revengebot
-- -secret -seen
-- +shared +statuslog
-- +userbans +userexempts
-- +userinvites -protecthalfops
-- -autohalfop
--}
--
--# Add each static channel you want your bot to sit in using the following
--# command. There are many different possible settings you can insert into
--# this command, which are explained below.
--#
--# channel add #lamest {
--# chanmode "+nt-likm"
--# idle-kick 0
--# stopnethack-mode 0
--# revenge-mode 0
--# ban-time 120
--# exempt-time 60
--# invite-time 60
--# aop-delay 5:30
--# need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
--# need-invite { putserv "PRIVMSG #lamest :let me in!" }
--# need-key { putserv "PRIVMSG #lamest :let me in!" }
--# need-unban { putserv "PRIVMSG #lamest :let me in!" }
--# need-limit { putserv "PRIVMSG #lamest :let me in!" }
--# flood-chan 10:60
--# flood-deop 3:10
--# flood-kick 3:10
--# flood-join 5:60
--# flood-ctcp 3:60
--# flood-nick 5:60
--# }
--#
--# chanmode +/-<modes>
--# This setting makes the bot enforce channel modes. It will always add
--# the +<modes> and remove the -<modes> modes.
--# idle-kick 0
--# This setting will make the bot check every minute for idle
--# users. Set this to 0 to disable idle check.
--#
--# stopnethack-mode 0
--# This setting will make the bot de-op anyone who enters the channel
--# with serverops. There are seven different modes for this settings:
--# 0 turn off,
--# 1 isoptest (allow serverop if registered op)
--# 2 wasoptest (allow serverop if op before split)
--# 3 allow serverop if isop or wasop
--# 4 allow serverop if isop and wasop.
--# 5 If the channel is -bitch, see stopnethack-mode 3
--# If the channel is +bitch, see stopnethack-mode 1
--# 6 If the channel is -bitch, see stopnethack-mode 2
--# If the channel is +bitch, see stopnethack-mode 4
--#
--# revenge-mode 0
--# This settings defines how the bot should punish bad users when
--# revenging. There are four possible settings:
--# 0 Deop the user.
--# 1 Deop the user and give them the +d flag for the channel.
--# 2 Deop the user, give them the +d flag for the channel, and kick them.
--# 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
--#
--# ban-time 120
--# Set here how long temporary bans will last (in minutes). If you
--# set this setting to 0, the bot will never remove them.
--#
--# exempt-time 60
--# Set here how long temporary exempts will last (in minutes). If you
--# set this setting to 0, the bot will never remove them. The bot will
--# check the exempts every X minutes, but will not remove the exempt if
--# a ban is set on the channel that matches that exempt. Once the ban is
--# removed, then the exempt will be removed the next time the bot checks.
--# Please note that this is an IRCnet feature.
--#
--# invite-time 60
--# Set here how long temporary invites will last (in minutes). If you
--# set this setting to 0, the bot will never remove them. The bot will
--# check the invites every X minutes, but will not remove the invite if
--# a channel is set to +i. Once the channel is -i then the invite will be
--# removed the next time the bot checks. Please note that this is an IRCnet
--# feature.
--#
--# aop-delay (minimum:maximum)
--# This is used for autoop, autohalfop, autovoice. If an op or voice joins a
--# channel while another op or voice is pending, the bot will attempt to put
--# both modes on one line.
--# aop-delay 0 No delay is used.
--# aop-delay X An X second delay is used.
--# aop-delay X:Y A random delay between X and Y is used.
--#
--# need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
--# This setting will make the bot run the script enclosed in brackets
--# if it does not have ops. This must be shorter than 120 characters.
--# If you use scripts like getops.tcl or botnetop.tcl, you don't need
--# to set this setting.
--#
--# need-invite { putserv "PRIVMSG #lamest :let me in!" }
--# This setting will make the bot run the script enclosed in brackets
--# if it needs an invite to the channel. This must be shorter than 120
--# characters. If you use scripts like getops.tcl or botnetop.tcl, you
--# don't need to set this setting.
--#
--# need-key { putserv "PRIVMSG #lamest :let me in!" }
--# This setting will make the bot run the script enclosed in brackets
--# if it needs the key to the channel. This must be shorter than 120
--# characters. If you use scripts like getops.tcl or botnetop.tcl, you
--# don't need to set this setting
--#
--# need-unban { putserv "PRIVMSG #lamest :let me in!" }
--# This setting will make the bot run the script enclosed in brackets
--# if it needs to be unbanned on the channel. This must be shorter than
--# 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
--# you don't need to set this setting
--#
--# need-limit { putserv "PRIVMSG #lamest :let me in!" }
--# This setting will make the bot run the script enclosed in brackets
--# if it needs the limit to be raised on the channel. This must be
--# shorter than 120 characters. If you use scripts like getops.tcl or
--# botnetop.tcl, you don't need to set this setting
--#
--# flood-chan 10:60
--# Set here how many channel messages in how many seconds from one
--# host constitutes a flood. Setting this to 0 or 0:0 disables
--# flood protection for the channel.
--#
--# flood-deop 3:10
--# Set here how many deops in how many seconds from one host constitutes
--# a flood. Setting this to 0 or 0:0 disables deop flood protection for
--# the channel.
--#
--# flood-kick 3:10
--# Set here how many kicks in how many seconds from one host constitutes
--# a flood. Setting this to 0 or 0:0 disables kick flood protection for
--# the channel.
--#
--# flood-join 5:60
--# Set here how many joins in how many seconds from one host constitutes
--# a flood. Setting this to 0 or 0:0 disables join flood protection for
--# the channel.
--#
--# flood-ctcp 3:60
--# Set here how many channel ctcps in how many seconds from one host
--# constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
--# protection for the channel.
--#
--# flood-nick 5:60
--# Set here how many nick changes in how many seconds from one host
--# constitutes a flood. Setting this to 0 or 0:0 disables nick flood
--# protection for the channel.
--#
--# There are many different options for channels which you can
--# define. They can be enabled or disabled using the channel set command by a
--# plus or minus in front of them.
--#
--# channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
--# channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
--# channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
--# channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
--# channel set #lamest -bitch -secret -shared +greet +cycle
--#
--# A complete list of all available channel settings:
--#
--# enforcebans
--# When a ban is set, kick people who are on the channel and match
--# the ban?
--#
--# dynamicbans
--# Only activate bans on the channel when necessary? This keeps
--# the channel's ban list from getting excessively long. The bot
--# still remembers every ban, but it only activates a ban on the
--# channel when it sees someone join who matches that ban.
--#
--# userbans
--# Allow bans to be made by users directly? If turned off, the bot
--# will require all bans to be made through the bot's console.
--#
--# dynamicexempts
--# Only activate exempts on the channel when necessary? This keeps
--# the channel's exempt list from getting excessively long. The bot
--# still remembers every exempt, but it only activates a exempt on
--# the channel when it sees a ban set that matches the exempt. The
--# exempt remains active on the channel for as long as the ban is
--# still active.
--#
--# userexempts
--# Allow exempts to be made by users directly? If turned off, the
--# bot will require all exempts to be made through the bot's console.
--#
--# dynamicinvites
--# Only activate invites on the channel when necessary? This keeps
--# the channel's invite list from getting excessively long. The bot
--# still remembers every invite, but the invites are only activated
--# when the channel is set to invite only and a user joins after
--# requesting an invite. Once set, the invite remains until the
--# channel goes to -i.
--#
--# userinvites
--# Allow invites to be made by users directly? If turned off, the
--# bot will require all invites to be made through the bot's console.
--#
--# autoop
--# Op users with the +o flag as soon as they join the channel?
--# This is insecure and not recommended.
--#
--# autohalfop
--# Halfop users with the +l flag as soon as they join the channel?
--# This is insecure and not recommended.
--#
--# bitch
--# Only let users with +o) flag be opped on the channel?
--#
--# greet
--# Say a user's info line when they join the channel?
--#
--# protectops
--# Re-op a user with the +o flag if they get deopped?
--#
--# protecthalfops
--# Re-halfop a user with the +l flag if they get dehalfopped?
--#
--# protectfriends
--# Re-op a user with the +f flag if they get deopped?
--#
--# statuslog
--# Log the channel status line every 5 minutes? This shows the bot's
--# status on the channel (op, voice, etc.), the channel's modes, and
--# the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
--# status line follows:
--#
--# [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
--#
--# revenge
--# Remember people who deop/kick/ban the bot, valid ops, or friends
--# and punish them? Users with the +f flag are exempt from revenge.
--#
--# revengebot
--# This is similar to to the 'revenge' option, but it only triggers
--# if a bot gets deopped, kicked or banned.
--#
--# autovoice
--# Voice users with the +v flag when they join the channel?
--#
--# secret
--# Prevent this channel from being listed on the botnet?
--#
--# shared
--# Share channel-related user info for this channel?
--#
--# cycle
--# Cycle the channel when it has no ops?
--#
--# dontkickops
--# Do you want the bot not to be able to kick users who have the +o
--# flag, letting them kick-flood for instance to protect the channel
--# against clone attacks.
--#
--# inactive
--# This prevents the bot from joining the channel (or makes it leave
--# the channel if it is already there). It can be useful to make the
--# bot leave a channel without losing its settings, channel-specific
--# user flags, channel bans, and without affecting sharing.
--#
--# seen
--# Respond to seen requests in the channel? The seen module must be
--# loaded for this to work.
--#
--# nodesynch
--# Allow non-ops to perform channel modes? This can stop the bot from
--# fighting with services such as ChanServ, or from kicking IRCops when
--# setting channel modes without having ops.
--#
--# Here is a shorter example:
--#
--# channel add #botcentral {
--# chanmode "+mntisl 1"
--# idle-kick 1
--# }
--# channel set #botcentral +bitch +enforcebans -greet +revenge
--
--
--#### SERVER MODULE ####
--
--# This module provides the core server support. You have to load this
--# if you want your bot to come on IRC. Not loading this is equivalent
--# to the old NO_IRC define.
--loadmodule server
--
--# What is your network?
--# 0 = EFnet
--# 1 = IRCnet
--# 2 = Undernet
--# 3 = DALnet
--# 4 = +e/+I/max-modes 20 Hybrid
--# 5 = Others
--set net-type 0
--
--# Set the nick the bot uses on IRC, and on the botnet unless you specify a
--# separate botnet-nick, here.
--set nick "Lamestbot"
--
--# Set the alternative nick which the bot uses on IRC if the nick specified
--# by 'set nick' is unavailable. All '?' characters will be replaced by random
--# numbers.
--set altnick "Llamab?t"
--
--# Set what should be displayed in the real-name field for the bot on IRC.
--set realname "/msg LamestBot hello"
--
--# This is a Tcl script to be run immediately after connecting to a server.
--bind evnt - init-server evnt:init_server
--
--proc evnt:init_server {type} {
-- global botnick
-- putquick "MODE $botnick +i-ws"
--}
--
--# Set the default port which should be used if none is specified with
--# '.jump' or in 'set servers'.
--set default-port 6667
--
--# This is the bot's server list. The bot will start at the first server listed,
--# and cycle through them whenever it gets disconnected. You need to change these
--# servers to YOUR network's servers.
--#
--# The format is:
--# server[:port[:password]]
--#
--# Both the port and password fields are optional; however, if you want to set a
--# password you must also set a port. If a port isn't specified it will default to
--# your default-port setting.
--set servers {
-- you.need.to.change.this:6667
-- another.example.com:7000:password
--}
--
--# This setting makes the bot try to get his original nickname back if its
--# primary nickname is already in use.
--set keep-nick 1
--
--# Set this to 1 if you don't want your the bot to strip a leading '~' on
--# user@hosts.
--set strict-host 0
--
--# This setting makes the bot squelch the error message when rejecting a DCC
--# CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
--# command has been rejected because they don't have access. Note that sometimes
--# IRC server operators detect bots that way.
--set quiet-reject 1
--
--# If you want your bot to answer lower case ctcp requests (non rfc-
--# compliant), set this setting to 1. mIRC will do this, most other
--# clients will not.
--set lowercase-ctcp 0
--
--# Set how many ctcps should be answered at once.
--set answer-ctcp 3
--
--# Set here how many msgs in how many seconds from one host constitutes
--# a flood. If you set this to 0:0, msg flood protection will be disabled.
--set flood-msg 5:60
--
--# Set here how many ctcps in how many seconds from one host constitutes
--# a flood. If you set this to 0:0, ctcp flood protection will be disabled.
--set flood-ctcp 3:60
--
--# This settings makes the bot cycle forever through the server list until
--# it successfully connects to one.
--set never-give-up 1
--
--# This setting defines how long Eggdrop should wait before moving from one
--# server to another on disconnect. If you set 0 here, Eggdrop will not wait
--# at all and will connect instantly. Setting this too low could result in
--# your bot being K:Lined.
--set server-cycle-wait 60
--
--# Set here how long Eggdrop should wait for a response when connecting to a
--# server before giving up and moving on to next server.
--set server-timeout 60
--
--# If the number of servers on the net gets below this number, the bot
--# will jump to a new server (it will assume it's on the losing end of
--# a netsplit). Set this to 0 to turn off. If your bot is running on
--# any major IRC network, this should probably be turned off.
--set servlimit 0
--
--# Set this to 1 if Eggdrop should check for stoned servers? (where the
--# server connection has died, but Eggdrop hasn't been notified yet).
--set check-stoned 1
--
--# If you want your bot to exit the server if it receives an ERROR message,
--# set this to 1.
--set serverror-quit 1
--
--# Set here the maximum number of lines to queue to the server. If you're
--# going to dump large chunks of text to people over IRC, you will probably
--# want to raise this. 300 is fine for most people though.
--set max-queue-msg 300
--
--# If you want Eggdrop to trigger binds for ignored users, set this to 1.
--set trigger-on-ignore 0
--
--# Allow identical messages in the mode queue?
--set double-mode 1
--
--# Allow identical messages in the server queue?
--set double-server 1
--
--# Allow identical messages in the help queue?
--set double-help 1
--
--# This optimizes the kick queue. It also traces nick changes and parts in
--# the channel and changes the kick queue accordingly. There are three
--# different options for this setting:
--# 0 = Turn it off.
--# 1 = Optimize the kick queue by summarizing kicks.
--# 2 = Trace nick changes and parts on the channel and change the queue
--# accordingly. For example, bot will not try to kick users who have
--# already parted the channel.
--# ATTENTION: Setting 2 is very CPU intensive.
--set optimize-kicks 1
--
--# If your network supports more recipients per command then 1, you can
--# change this behavior here. Set this to the number of recipients per
--# command, or set this to 0 for unlimited.
--set stack-limit 4
--
--### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
--
--# This settings defines how umode +r is understood by Eggdrop. Some networks
--# use +r to indicate a restricted connection. If this is your case, and you
--# want your bot to leave restricted servers and jump to the next server on its
--# list, then set it to 1.
--#set check-mode-r 1
--
--# This setting allows you to specify the maximum nick-length supported by your
--# network. The default setting is 9. The maximum supported length by Eggdrop
--# is 32.
--#set nick-len 9
--
--#### CTCP MODULE ####
--
--# This module provides the normal ctcp replies that you'd expect.
--# Without it loaded, CTCP CHAT will not work. The server module
--# is required for this module to function.
--loadmodule ctcp
--
--# Set here how the ctcp module should answer ctcps. There are 3 possible
--# operating modes:
--# 0: Normal behavior is used.
--# 1: The bot ignores all ctcps, except for CHAT and PING requests
--# by users with the +o flag.
--# 2: Normal behavior is used, however the bot will not answer more
--# than X ctcps in Y seconds (defined by 'set flood-ctcp').
--set ctcp-mode 0
--
--# There are also several variables to help make your bot less noticeable.
--# They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
--# them to values you'd like.
--
--
--#### IRC MODULE ####
--
--# This module provides basic IRC support for your bot. You have to
--# load this if you want your bot to come on IRC. The server and channels
--# modules must be loaded for this module to function.
--loadmodule irc
--
--# Set this to 1 if you want to bounce all server bans.
--set bounce-bans 1
--
--# Set this to 1 if you want to bounce all server exemptions (+e modes).
--# This is disabled if use-exempts is disabled.
--set bounce-exempts 0
--
--# Set this to 1 if you want to bounce all server invitations (+I modes).
--# This is disabled if use-invites is disabled.
--set bounce-invites 0
--
--# Set this to 1 if you want to bounce all server modes.
--set bounce-modes 0
--
--# Set here the maximum number of bans you want the bot to set on a channel.
--# Eggdrop will not place any more bans if this limit is reached. Undernet
--# currently allows 45 bans, IRCnet allows 30, EFnet allows 100, and DALnet
--# allows 100.
--set max-bans 30
--
--# Set here the maximum number of exempts you want Eggdrop to set on a channel.
--# Eggdrop will not place any more exempts if this limit is reached.
--set max-exempts 20
--
--# Set here the maximum number of invites you want Eggdrop to set on a channel.
--# Eggdrop will not place any more invites if this limit is reached.
--set max-invites 20
--
--# There is a global limit for +b/+e/+I modes. This limit should be set to
--# the same value as max-bans for networks that do not support +e/+I.
--set max-modes 30
--
--# The following settings should be left commented unless the default values
--# are being overridden. By default, exempts and invites are on for EFnet and
--# IRCnet, but off for all other large networks. This behavior can be modified
--# with the following 2 flags. If your network doesn't support +e/+I modes then
--# you will be unable to use these features.
--#
--# Do you want to enable exempts (+e modes)?
--#set use-exempts 0
--
--# Do you want to enable invites (+I modes)?
--#set use-invites 0
--
--# Set this to 1 if you want the bot to kick for control character/ctcp
--# avalanches to a channel. Remember that if it does, it won't ban them.
--# This can start kick floods.
--set kick-fun 0
--
--# Set this to 1 if you want the bot to ban for control character/ctcp
--# avalanches to a channel. This can prevent kick floods, but it also can
--# fill the banlist.
--set ban-fun 0
--
--# If you want people to be able to add themselves to the bot's userlist
--# with the default userflags (defined above in the config file) via the
--# 'hello' msg command, set this to 1.
--set learn-users 0
--
--# Set here the time (in seconds) to wait for someone to return from a netsplit
--# (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
--# nick delay stops after 30 minutes.
--set wait-split 600
--
--# Set here the time (in seconds) that someone must have been off-channel
--# before re-displaying their info line.
--set wait-info 180
--
--# Set this to the maximum number of bytes to send in the arguments
--# of modes sent to the server. Most servers default this to 200.
--set mode-buf-length 200
--
--# Many IRCops find bots by seeing if they reply to 'hello' in a msg.
--# You can change this to another word by un-commenting the following
--# two lines and changing "myword" to the word wish to use instead of
--# 'hello'. It must be a single word.
--#unbind msg - hello *msg:hello
--#bind msg - myword *msg:hello
--
--# Many takeover attempts occur due to lame users blindly /msg ident'ing to
--# the bot and attempting to guess passwords. We now unbind this command by
--# default to discourage them. You can enable these commands by commenting the
--# following two lines.
--unbind msg - ident *msg:ident
--unbind msg - addhost *msg:addhost
--
--# Some IRC servers are using some non-standard op-like channel prefixes/modes.
--# Define them here so the bot can recognize them. Just "@" should be fine for
--# most networks. Un-comment the second line for some UnrealIRCds.
--
--set opchars "@"
--#set opchars "@&~"
--
--# If you are so lame you want the bot to display peoples info lines, even
--# when you are too lazy to add their chanrecs to a channel, set this to 1.
--# *NOTE* This means *every* user with an info line will have their info
--# line displayed on EVERY channel they join (provided they have been gone
--# longer than wait-info).
--set no-chanrec-info 0
--
--### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
--
--# Attention: Use these settings *only* if you set 'net-type' to 1!
--
--# At the moment, the current IRCnet IRCd version (2.10) doesn't support the
--# mixing of b, o and v modes with e and I modes. This might be changed in the
--# future, so use 1 at the moment for this setting.
--set prevent-mixing 1
--
--### IRC MODULE - OTHER NETWORKS (net-type 5) ###
--
--# Attention: Use these settings *only* if you set 'net-type' to 5!
--
--# If your network supports more users per kick command then 1, you can
--# change this behavior here. Set this to the number of users to kick at
--# once, or set this to 0 for all at once.
--#set kick-method 1
--
--# Some networks allow you to stack lots of channel modes into one line.
--# They're all guaranteed to support at least 3, so that's the default.
--# If you know your network supports more, you may want to adjust this.
--# This setting is limited to 6, although if you want to use a higher value,
--# you can modify this by changing the value of MODES_PER_LINE_MAX in
--# src/chan.h and recompiling the bot.
--#set modes-per-line 3
--
--# Some networks don't include the +l limit and +k or -k key modes
--# in the modes-per-line (see above) limitation. Set include-lk to 0 for
--# these networks.
--#set include-lk 1
--
--# Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
--# Eggdrop can, therefore, ask only for exactly what's needed.
--#set use-354 0
--
--# If your network doesn't use rfc 1459 compliant string matching routines,
--# set this to 0.
--#set rfc-compliant 1
--
--
--#### TRANSFER MODULE ####
--
--# The transfer module provides DCC SEND/GET support and userfile transfer
--# support for userfile sharing. Un-comment the next line to load it if you
--# need this functionality.
--#loadmodule transfer
--
--# Set here the maximum number of simultaneous downloads to allow for
--# each user.
--set max-dloads 3
--
--# Set here the block size for dcc transfers. ircII uses 512 bytes,
--# but admits that it may be too small. 1024 is standard these days.
--# 0 is turbo-dcc (recommended).
--set dcc-block 0
--
--# Enable this setting if you want to copy files into the /tmp directory
--# before sending them. This is useful on most systems for file stability,
--# but if your directories are NFS mounted, it's a pain, and you'll want
--# to set this to 0. If you are low on disk space, you may also want to
--# set this to 0.
--set copy-to-tmp 1
--
--# Set here the time (in seconds) to wait before an inactive transfer times out.
--set xfer-timeout 30
--
--
--#### SHARE MODULE ####
--
--# This module provides userfile sharing support between two directly
--# linked bots. The transfer and channels modules are required for this
--# module to correctly function. Un-comment the following line to load
--# the share module.
--#loadmodule share
--
--# Settings in this section must be un-commented before setting.
--
--# When two bots get disconnected, this setting allows them to create a
--# resync buffer which saves all changes done to the userfile during
--# the disconnect. When they reconnect, they will not have to transfer
--# the complete user file, but, instead, just send the resync buffer.
--#
--# NOTE: This has been known to cause loss of channel flags and other
--# problems. Using this setting is not recommended.
--#set allow-resync 0
--
--# This setting specifies how long to hold another bots resync data
--# before flushing it.
--#set resync-time 900
--
--# When sharing user lists, DON'T ACCEPT global flag changes from other bots?
--# NOTE: The bot will still send changes made on the bot, it just won't accept
--# any global flag changes from other bots. This overrides the private-globals
--# setting (below).
--#set private-global 0
--
--# When sharing user lists, if private-global isn't set, which global flag
--# changes from other bots should be ignored?
--#set private-globals "mnot"
--
--# When sharing user lists, which channel flags changes from other bots
--# should be ignored?
--#set private-chanflags "mn"
--
--# When sharing user lists, don't accept ANY userfile changes from other
--# bots? Paranoid people should use this feature on their hub bot. This
--# will force all userlist changes to be made via the hub.
--#set private-user 0
--
--# When you have multilevel botnet, this option permits hub, to make changes,
--# even when private-global, private-chanflags and/or private-user are set.
--# NOTE: this option doesn't permit hub to force flags filtered by
--# private-globals
--#set permit-hub 1
--
--# This setting makes the bot discard its own bot records in favor of
--# the ones sent by the hub.
--# NOTE: No passwords or botflags are shared, only ports and
--# address are added to sharing procedure. This only works with hubs that
--# are v1.5.1 or higher.
--#set override-bots 0
--
--
--#### COMPRESS MODULE ####
--
--# This module provides provides support for file compression. This allows the
--# bot to transfer compressed user files and therefore save a significant amount
--# of bandwidth. The share module must be loaded to load this module. Un-comment
--# the following line to the compress module.
--#loadmodule compress
--
--# Allow compressed sending of user files? The user files are compressed with
--# the compression level defined in `compress-level'.
--set share-compressed 1
--
--# This is the default compression level used. These levels are the same as
--# those used by GNU gzip.
--#set compress-level 9
--
--
--#### FILESYSTEM MODULE ####
--
--# This module provides an area within the bot where users can store and
--# manage files. With this module, the bot is usable as a file server. The
--# transfer module is required for this module to function. Un-comment
--# the following line to load the filesys module.
--#loadmodule filesys
--
--# Set here the 'root' directory for the file system.
--set files-path "/home/mydir/filesys"
--
--# If you want to allow uploads, set this to the directory uploads
--# should be put into. Set this to "" if you don't want people to
--# upload files to your bot.
--set incoming-path "/home/mydir/filesys/incoming"
--
--# If you don't want to have a central incoming directory, but instead
--# want uploads to go to the current directory that a user is in, set
--# this setting to 1.
--set upload-to-pwd 0
--
--# Eggdrop creates a '.filedb' file in each subdirectory of your file area
--# to keep track of its own file system information. If you can't do that (for
--# example, if the dcc path isn't owned by you, or you just don't want it to do
--# that) specify a path here where you'd like all of the database files to be
--# stored instead.
--set filedb-path ""
--
--# Set here the maximum number of people that can be in the file area at once.
--# Setting this to 0 makes it effectively infinite.
--set max-file-users 20
--
--# Set here the maximum allowable file size that will be received (in KB).
--# Setting this to 0 makes it effectively infinite.
--set max-filesize 1024
--
--
--#### NOTES MODULE ####
--
--# This module provides support for storing of notes for users from each other.
--# Note sending between currently online users is supported in the core, this is
--# only for storing the notes for later retrieval.
--loadmodule notes
--
--# Set here the filename where private notes between users are stored.
--set notefile "LamestBot.notes"
--
--# Set here the maximum number of notes to allow to be stored for each user
--# (to prevent flooding).
--set max-notes 50
--
--# Set here how long (in days) to store notes before expiring them.
--set note-life 60
--
--# Set this to 1 if you want to allow users to specify a forwarding address
--# for forwarding notes to another account on another bot.
--set allow-fwd 0
--
--# Set this to 1 if you want the bot to let people know hourly if they have
--# any notes.
--set notify-users 1
--
--# Set this to 1 if you want the bot to let people know on join if they have
--# any notes.
--set notify-onjoin 1
--
--# Comment out this next line. Otherwise, your bot won't start.
--die "You didn't edit your config file completely like you were told, did you?"
--
--
--#### CONSOLE MODULE ####
--
--# This module provides storage of console settings when you exit the
--# bot or type .store on the partyline.
--loadmodule console
--
--# Save users console settings automatically? Otherwise, they have
--# to use the .store command.
--set console-autosave 1
--
--# If a user doesn't have any console settings saved, which channel
--# do you want them automatically put on?
--set force-channel 0
--
--# Enable this setting if a user's global info line should be displayed
--# when they join a botnet channel.
--set info-party 0
--
--
--#### WOOBIE MODULE ####
--
--# This is for demonstrative purposes only. If you are looking for starting
--# point in writing modules, woobie is the right thing.
--#loadmodule woobie
--
--
--#### SEEN MODULE ####
--
--# This module provides very basic seen commands via msg, on channel or via dcc.
--# This module works only for users in the bot's userlist. If you are looking for
--# a better and more advanced seen module, try the gseen module by G'Quann. You
--# can find it at http://www.visions-of-fantasy.de/gseen.mod/.
--#loadmodule seen
--
--
--#### BLOWFISH MODULE ####
--
--# IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
--# Eggdrop encrypts its userfile, so users can have secure passwords.
--# Please note that when you change your encryption method later (i.e.
--# using other modules like a md5 module), you can't use your current
--# userfile anymore. Eggdrop will not start without an encryption module.
--#loadmodule blowfish
--
--
--#### ASSOC MODULE ####
--
--# This module provides assoc support, i.e. naming channels on the botnet.
--# You can load it by un-commenting the following line.
--#loadmodule assoc
--
--
--#### WIRE MODULE ####
--
--# This module provides all the standard .wire commands via dcc. It is an
--# encrypted partyline communication tool, compatible with wire.tcl. An
--# encryption module must be loaded to use this module. Un-comment the
--# following line to load the wire module.
--#loadmodule wire
--
--#### UPTIME MODULE ####
--
--# This module reports uptime statistics to http://uptime.eggheads.org.
--# Go look and see what your uptime is! It takes about 9 hours to show up,
--# so if your bot isn't listed, try again later. The server module must be
--# loaded for this module to function.
--#
--# Information sent to the server includes the bot's uptime, botnet-nick,
--# server, version, and IP address. This information is stored in a temporary
--# logfile for debugging purposes only. The only publicly available information
--# will be the bot's botnet-nick, version and uptime. If you do not wish for this
--# information to be sent, comment out the following line.
--loadmodule uptime
--
--##### SCRIPTS #####
--
--# This is a good place to load scripts to use with your bot.
--
--# This line loads script.tcl from the scripts directory inside your Eggdrop's
--# directory. All scripts should be put there, although you can place them where
--# you like as long as you can supply a fully qualified path to them.
--#
--# source /usr/share/eggdrop/scripts/script.tcl
--
--source /usr/share/eggdrop/scripts/alltools.tcl
--source /usr/share/eggdrop/scripts/action.fix.tcl
--
--# Use this script for Tcl and Eggdrop downwards compatibility.
--# NOTE: This can also cause problems with some newer scripts.
--source /usr/share/eggdrop/scripts/compat.tcl
--
--# This script provides many useful informational functions, like setting
--# users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
--# extra entries.
--source /usr/share/eggdrop/scripts/userinfo.tcl
--loadhelp userinfo.help
diff -burN eggdrop1.6.17.orig/Makefile eggdrop1.6.17/Makefile
--- eggdrop1.6.17.orig/Makefile 2004-11-01 14:40:44.093457768 +0100
+++ eggdrop1.6.17/Makefile 1970-01-01 01:00:00.000000000 +0100
/*
*
*
-diff -burN eggdrop1.6.17.orig/src/patch.h.orig eggdrop1.6.17/src/patch.h.orig
---- eggdrop1.6.17.orig/src/patch.h.orig 2004-11-01 14:40:44.071461112 +0100
-+++ eggdrop1.6.17/src/patch.h.orig 1970-01-01 01:00:00.000000000 +0100
-@@ -1,200 +0,0 @@
--/*
-- * patch.h
-- * header file for adding patches to Eggdrop's version string
-- *
-- * PLACE YOUR PATCHES HERE...
-- *
-- * HOW TO DO IT:
-- *
-- * replace a *** PATCH GOES HERE *** line with a patch("patchname");
-- * statement, leave the rest of the file alone, this allows better
-- * overlapping patches.
-- *
-- * $Id$
-- */
--/*
-- * Copyright (C) 1997 Robey Pointer
-- * Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Eggheads Development Team
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License
-- * as published by the Free Software Foundation; either version 2
-- * of the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-- */
--#ifndef _EGG_PATCH_H
--#define _EGG_PATCH_H
--/*
-- *
-- *
-- */
--patch("multilevel_sharing");
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* PATCH GOES HERE */
--/*
-- *
-- *
-- */
--/* if that's not enough, maybe you should release a new version :) */
--#endif /* _EGG_PATCH_H */
diff -burN eggdrop1.6.17.orig/src/tcl.c eggdrop1.6.17/src/tcl.c
--- eggdrop1.6.17.orig/src/tcl.c 2004-11-01 14:40:44.052464000 +0100
+++ eggdrop1.6.17/src/tcl.c 2004-11-01 14:41:52.049126936 +0100
projects / packages / eggdrop.git / commitdiff