--- diag-ether/ne2k-pci-diag.c.bak	2004-02-22 21:11:23.000000000 +0000
+++ diag-ether/ne2k-pci-diag.c	2004-02-22 21:14:39.000000000 +0000
@@ -767,35 +767,34 @@
 		   p[23] & 8 ? "no link beat required" : "autoselect by link beat",
 		   winbond_rom[p[23]>>5]);
 	if (ee_data[9] ==  0x8c4a)
-		printf("
-This board has bogus information written into the configuration EEPROM.
-The configuration table is for a Realtek chip, but this board is using
-a Winbond 89c940 chip.  This misprogramming usually results in an invalid
-station address, and prevents the board from being detected by standard
-drivers.
-
-To reprogram the configuration EEPROM select a new station address such as
-40:00:00:12:34:56 and run this diagnostic with the options
-    --write-EEPROM --emergency-rewrite --new-hwaddr 40:00:00:12:34:56
-");
+		printf(
+"This board has bogus information written into the configuration EEPROM.\n"
+"The configuration table is for a Realtek chip, but this board is using\n"
+"a Winbond 89c940 chip.  This misprogramming usually results in an invalid\n"
+"station address, and prevents the board from being detected by standard\n"
+"drivers.\n"
+"\n"
+"To reprogram the configuration EEPROM select a new station address such as\n"
+"40:00:00:12:34:56 and run this diagnostic with the options\n"
+"    --write-EEPROM --emergency-rewrite --new-hwaddr 40:00:00:12:34:56\n"
+);
 			   
 	return;
 }
 
-static char unknown_eeprom_message[] = "
- No information is known about how to read or write the configuration
- EEPROM of this NIC board.  It is likely that this NIC is using a common
- chip with a unique PCI ID.  It may be possible to read the EEPROM by
- explicitly specifying the chip type and I/O address:
-   ne2k-pci-diag -t 1 -p <ioaddr>	# For Realtek rtl8029 chip
-   ne2k-pci-diag -t 2 -p <ioaddr>	# For Winbond 89C940 chip
-   ne2k-pci-diag -t 3 -p <ioaddr>	# For Holtek HT80229 chip
- If one of these is required, please send a report to becker@scyld.com.
-";
-static char no_rewrite_msg[] = "
-*** Emergency EEPROM rewrite is not yet available for this chip type.
- ** See the Scyld diagnostic web page for updates and more information.
- ** http://www.scyld.com/diag/index.html";
+static char unknown_eeprom_message[] = 
+" No information is known about how to read or write the configuration\n"
+" EEPROM of this NIC board.  It is likely that this NIC is using a common\n"
+" chip with a unique PCI ID.  It may be possible to read the EEPROM by\n"
+" explicitly specifying the chip type and I/O address:\n"
+"   ne2k-pci-diag -t 1 -p <ioaddr>	# For Realtek rtl8029 chip\n"
+"   ne2k-pci-diag -t 2 -p <ioaddr>	# For Winbond 89C940 chip\n"
+"   ne2k-pci-diag -t 3 -p <ioaddr>	# For Holtek HT80229 chip\n"
+" If one of these is required, please send a report to becker@scyld.com.\n" ;
+static char no_rewrite_msg[] = 
+"*** Emergency EEPROM rewrite is not yet available for this chip type.\n"
+" ** See the Scyld diagnostic web page for updates and more information.\n"
+" ** http://www.scyld.com/diag/index.html";
 
 /* The examples below have 00:11:22:33:44:55 as the station address. */
 static unsigned short winbond_default_eeprom[] = {