1 --- diag-ether/ns820-diag.c.org 2002-12-02 00:00:00.000000000 +0000
2 +++ diag-ether/ns820-diag.c 2004-02-22 21:46:46.000000000 +0000
4 " For details and other options see http://www.scyld.com/diag/index.html\n";
6 static const char long_usage_msg[] =
7 -"Usage: %s [-aDfrRvVw] [-AF <speed+duplex>] [-#<BoardNum>]
9 - Show the internal state of a network adapter.
14 - Frequently used options are
15 - -a --show_all_registers Print all registers.
16 - -e --show-eeprom Dump EEPROM contents, \"-ee\" shows the details.
17 - -m --show_mii Print the MII transceiver state
18 - Using -mm monitors the link.
19 - -f --force Perform operation, even on a running NIC.
21 - To operate on a single NIC, or one that hasn't been automatically found:
22 - -# --card_num INDEX Operate on the specified card index.
23 - -p --port-base IOADDR Assume an adapter at the specified I/O address.
24 - -t --chip-type TYPE Specify adapter type with '-p', use '-1' to list.
26 - To change the persistent EEPROM settings
27 - -G --parameters PARMS Set adapter-specific parameters.
28 - -H --new-hwaddr 01:23:45:67:ab:cd
29 - Set a new hardware station address. Typically diabled,
30 - -w --write-EEPROM Actually write the new settings into the EEPROM.
33 - -v --verbose Report each action taken.
34 - -V --version Emit version information.
36 - -A --advertise <speed|setting> (See the mii-diag manual page.)
38 +"Usage: %s [-aDfrRvVw] [-AF <speed+duplex>] [-#<BoardNum>]\n"
40 +" Show the internal state of a network adapter.\n"
42 +" The common usage is\n"
45 +" Frequently used options are\n"
46 +" -a --show_all_registers Print all registers.\n"
47 +" -e --show-eeprom Dump EEPROM contents, \"-ee\" shows the details.\n"
48 +" -m --show_mii Print the MII transceiver state\n"
49 +" Using -mm monitors the link.\n"
50 +" -f --force Perform operation, even on a running NIC.\n"
52 +" To operate on a single NIC, or one that hasn't been automatically found:\n"
53 +" -# --card_num INDEX Operate on the specified card index.\n"
54 +" -p --port-base IOADDR Assume an adapter at the specified I/O address.\n"
55 +" -t --chip-type TYPE Specify adapter type with '-p', use '-1' to list.\n"
57 +" To change the persistent EEPROM settings\n"
58 +" -G --parameters PARMS Set adapter-specific parameters.\n"
59 +" -H --new-hwaddr 01:23:45:67:ab:cd\n"
60 +" Set a new hardware station address. Typically diabled, \n"
61 +" -w --write-EEPROM Actually write the new settings into the EEPROM.\n"
64 +" -v --verbose Report each action taken.\n"
65 +" -V --version Emit version information.\n"
67 +" -A --advertise <speed|setting> (See the mii-diag manual page.)\n"
70 #if ! defined(__OPTIMIZE__)
71 #warning You must compile this program with the correct options!
74 /* The following are required only with unaligned field accesses. */
75 #include <asm/types.h>
76 -#include <asm/unaligned.h>
77 +//#include <asm/unaligned.h>
79 #if defined(__linux__) && __GNU_LIBRARY__ == 1
80 #include <asm/io.h> /* Newer libraries use <sys/io.h> instead. */