-%include /usr/lib/rpm/macros.perl
+#
+# Conditional build:
+%bcond_without systemd # systemd units
+
+Summary: A dynamic IP address utility
+Summary(pl.UTF-8): Narzędzie do dynamicznych adresów IP
+Summary(pt_BR.UTF-8): Cliente para atualizar entradas DNS dinâmicas no DynDNS.org
Name: ddclient
-Epoch: 1
-Version: 3.6.3
+Version: 3.11.2
Release: 1
-Summary: A dynamic IP address utility
-Summary(pt_BR): Cliente para atualizar entradas DNS dinâmicas no DynDNS.org
+Epoch: 1
+License: GPL v2
Group: Networking
-License: GPL
-URL: http://burry.ca:4141/ddclient/
-Source0: http://members.rogers.com/ddclient/pub/%{name}-%{version}.tar.gz
-# Source0-md5: 1773aaf469a1faddd3f20d485a0fd6f2
+Source0: https://github.com/ddclient/ddclient/archive/v%{version}/%{name}-%{version}.tar.gz
+# Source0-md5: 5ef2ff089cfe4d4b9e1248881199eb4a
Source1: %{name}.init
-BuildArch: noarch
+Source2: %{name}.sysconfig
+Source3: %{name}.NetworkManager
+Source4: %{name}-tmpfiles.conf
+Source5: %{name}.service
+Patch0: config.patch
+URL: https://github.com/ddclient/ddclient
+BuildRequires: autoconf
+BuildRequires: automake
+BuildRequires: perl-base
BuildRequires: rpm-perlprov
+BuildRequires: rpmbuild(macros) >= 1.268
+Provides: group(ddclient)
+Provides: user(ddclient)
+Requires(post,preun): /sbin/chkconfig
+Requires(postun): /usr/sbin/groupdel
+Requires(postun): /usr/sbin/userdel
+Requires(pre): /bin/id
+Requires(pre): /usr/bin/getgid
+Requires(pre): /usr/sbin/groupadd
+Requires(pre): /usr/sbin/useradd
+Requires: rc-scripts
+%{?with_systemd:Requires: systemd-units >= 1:250.1}
+# for freedns: Digest::SHA1, IO::Socket::SSL
+Suggests: perl-Digest-SHA1
+Suggests: perl-IO-Socket-SSL
+# for cloudflare JSON::Any
+Suggests: perl-JSON-Any
+BuildArch: noarch
BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
+%define cachedir %{_localstatedir}/cache/ddclient
+%define rundir %{_localstatedir}/run/ddclient
+%define _sysconfdir /etc/ddclient
+
%description
-Features: FULL DynDNS NIC2 support and now Custom updates and an RPM!
-DDclient is a small full featured client requiring only Perl and no
-additional modules. It runs under most UNIX OSes and has been tested
-under Linux and FreeBSD. Supported features include: operating as a
-daemon, manual and automatic updates, static and dynamic updates,
-optimized updates for multiple addresses, MX, wildcards, abuse
-avoidance, retrying failed updates, and sending update status to
-syslog and through e-mail. This release may now obtain your IP address
-from any interface, web based IP detection, Watchguard's SOHO router,
-Netopia's R910 router, SMC's Barricade broadband router, Netgear's
-RT3xx router, Linksys' broadband routers, MaxGate's UGATE-3x00
-routers, ELSA's LANCOM DSL/10 routers and now provides Full support
-for DynDNS.org's NIC2 protocol. Support is also included for other
-dynamic DNS services. Comes with sample scripts for use with DHCP,
-PPP, and cron. See the README for more information.
-
-%description -l pt_BR
-O ddclient é um cliente perl usada para atualizar entradas DNS
-dinâmicas em contas do serviço de DNS dinâmico gratuito. Veja
-http://www.dyndns.org para obter detalhes sobre como obter uma conta
+DDclient is a small full featured client with FULL DynDNS NIC2
+support, requiring only Perl and no additional modules. It runs under
+most UNIX OSes and has been tested under Linux and FreeBSD. Supported
+features include: operating as a daemon, manual and automatic updates,
+static and dynamic updates, optimized updates for multiple addresses,
+MX, wildcards, abuse avoidance, retrying failed updates, and sending
+update status to syslog and through e-mail. This release may now
+obtain your IP address from any interface, web based IP detection,
+Watchguard's SOHO router, Netopia's R910 router, SMC's Barricade
+broadband router, Netgear's RT3xx router, Linksys' broadband routers,
+MaxGate's UGATE-3x00 routers, ELSA's LANCOM DSL/10 routers and now
+provides Full support for DynDNS.org's NIC2 protocol. Support is also
+included for other dynamic DNS services. Comes with sample scripts for
+use with DHCP, PPP, and cron. See the README for more information.
+
+%description -l pl.UTF-8
+DDclient to mały, w pełni funkcjonalny klient z PEŁNĄ obsługą DynDNS
+NIC2, wymagający tylko Perla bez żadnych dodatkowych modułów. Działa
+pod większością systemów uniksowych, był testowany pod Linuksem i
+FreeBSD. Jego możliwości to między innymi: praca jako demon, ręczne i
+automatyczne uaktualnienia, statyczne i dynamiczne uaktualnienia,
+uaktualnienia zoptymalizowane dla wielu adresów, MX-y, wildcardy,
+zapobieganie nadużyciom, ponawianie nieudanych uaktualnień, wysyłanie
+statusu uaktualnień do sysloga i pocztą. Ta wersja może pobrać adres
+IP z dowolnego interfejsu, wykrywania przez WWW, routerów: Watchguard
+SOGO, szerokopasmowych SMC Barricane, Netgear RT3xx, szerokopasmowych
+Linksys, MaxGate UGATE-3x00, ELSA LANCOM DSL/10, a teraz także ma
+pełną obsługę protokołu DynDNS NIC2. Ma także wsparcie dla innych
+usług dynamicznego DNS. Zawiera przykładowe skrypty do używania z
+DHCP, PPP i cronem. Więcej informacji w README.
+
+%description -l pt_BR.UTF-8
+O ddclient é um cliente perl usada para atualizar entradas DNS
+dinâmicas em contas do serviço de DNS dinâmico gratuito. Veja
+<http://www.dyndns.org> para obter detalhes sobre como obter uma conta
gratuita.
%prep
%setup -q
+%patch0 -p1
%build
+%{__aclocal}
+%{__autoconf}
+%{__automake}
+%configure \
+ CURL=/usr/bin/curl
+%{__make}
%install
rm -rf $RPM_BUILD_ROOT
-install -d $RPM_BUILD_ROOT{/etc/rc.d/init.d,%{_sbindir}}
+install -d $RPM_BUILD_ROOT{%{_sysconfdir}/%{name},/etc/{rc.d/init.d,sysconfig,NetworkManager/dispatcher.d}} \
+ $RPM_BUILD_ROOT{%{_sbindir},%{systemdtmpfilesdir},%{?with_systemd:%{systemdunitdir},}%{cachedir},%{rundir}}
-install sample-etc_ddclient.conf $RPM_BUILD_ROOT/etc/%{name}.conf
-install %{name} $RPM_BUILD_ROOT%{_sbindir}
-install %{SOURCE1} $RPM_BUILD_ROOT/etc/rc.d/init.d/%{name}
+cp -p %{name}.conf $RPM_BUILD_ROOT%{_sysconfdir}
+install -p %{name} $RPM_BUILD_ROOT%{_sbindir}
+install -p %{SOURCE1} $RPM_BUILD_ROOT/etc/rc.d/init.d/%{name}
+cp -p %{SOURCE2} $RPM_BUILD_ROOT/etc/sysconfig/%{name}
+install -p %{SOURCE3} $RPM_BUILD_ROOT/etc/NetworkManager/dispatcher.d/50-%{name}
+cp -p %{SOURCE4} $RPM_BUILD_ROOT%{systemdtmpfilesdir}/%{name}.conf
+%{?with_systemd:cp -p %{SOURCE5} $RPM_BUILD_ROOT%{systemdunitdir}/%{name}.service}
+touch $RPM_BUILD_ROOT%{cachedir}/%{name}.cache
%clean
rm -rf $RPM_BUILD_ROOT
+%pre
+%groupadd -g 325 ddclient
+%useradd -u 525 -d /var/run/%{name} -g ddclient -c "ddclient user" ddclient
+
%post
-umask 022
/sbin/chkconfig --add %{name}
-if [ -f /var/lock/subsys/%{name} ]; then
- /etc/rc.d/init.d/%{name} restart >&2
-else
- echo "Run \"/etc/rc.d/init.d/%{name} start\" to start %{name} daemon."
+if [ "$1" = "2" ]; then
+ %service %{name} try-restart "%{name} daemon"
fi
+%{?with_systemd:%systemd_post %{name}.service}
%preun
if [ "$1" = "0" ]; then
- if [ -f /var/lock/subsys/%{name} ]; then
- /etc/rc.d/init.d/%{name} stop >&2
- fi
- /sbin/chkconfig --del %{name}
+ %service %{name} stop
+ /sbin/chkconfig --del %{name}
+fi
+%{?with_systemd:%systemd_preun %{name}.service}
+
+%postun
+if [ "$1" = "0" ]; then
+ %userremove ddclient
+ %groupremove ddclient
fi
+%{?with_systemd:%systemd_reload}
+
+%triggerpostun -- ddclient < 1:3.9.1-2
+if [ -f /etc/ddclient.conf.rpmsave ]; then
+ echo "Moving config to new location /etc/ddclient"
+ mv -f /etc/ddclient/ddclient.conf /etc/ddclient/ddclient.conf.rpmnew
+ mv -f /etc/ddclient.conf.rpmsave /etc/ddclient/ddclient.conf
+ mv -f /etc/ddclient.cache /etc/ddclient.cache.rpmsave
+fi
+%{?with_systemd:%systemd_trigger %{name}.service}
+
+%triggerin -- perl-base
+[ "$2" = "2" ] || exit 0
+%service %{name} try-restart "%{name} daemon"
+%{?with_systemd:%systemd_service_restart %{name}.service}
%files
%defattr(644,root,root,755)
-%doc README*
-%attr(755,root,root) %{_sbindir}/*
-%attr(640,root,root) %config(noreplace) %verify(not size mtime md5) /etc/%{name}.conf
+%doc ChangeLog.md README*
+%attr(755,root,root) %{_sbindir}/ddclient
+%dir %{_sysconfdir}
+# switch to %attr(640,root,ddclient) when this gets resolution: https://sourceforge.net/p/ddclient/bugs/77/
+%attr(600,ddclient,root) %config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/%{name}.conf
+%attr(600,root,root) %config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/%{name}
%attr(754,root,root) /etc/rc.d/init.d/%{name}
+%attr(755,root,root) /etc/NetworkManager/dispatcher.d/50-%{name}
+%{systemdtmpfilesdir}/%{name}.conf
+%{?with_systemd:%{systemdunitdir}/%{name}.service}
+
+%dir %attr(770,root,ddclient) %{cachedir}
+%ghost %attr(600,ddclient,ddclient) %ghost %{cachedir}/%{name}.cache
+%dir %attr(770,root,ddclient) %{rundir}
projects / packages / ddclient.git / blobdiff