- 8.74

[packages/dcraw.git] / dcraw.1

.\"
.\" Man page for dcraw
.\"
.\" Copyright (c) 2007 by David Coffin
.\"
.\" You may distribute without restriction.
.\"
.\" David Coffin
.\" dcoffin a cybercom o net
.\" http://www.cybercom.net/~dcoffin
.\"
.TH dcraw 1 "June 8, 2007"
.LO 1
.SH NAME
dcraw - command-line decoder for raw digital photos
.SH SYNOPSIS
.B dcraw
[\fIOPTION\fR]... [\fIFILE\fR]...
.SH DESCRIPTION
.B dcraw
decodes raw photos, displays metadata, and extracts thumbnails.
.SH OPTIONS
.TP
.B -v
Print verbose messages, not just warnings and errors.
.TP
.B -c
Write decoded images or thumbnails to standard output.
.TP
.B -e
Extract the camera-generated thumbnail, not the raw image.
You'll get either a JPEG or a PPM file, depending on the camera.
.TP
.B -z
Change the access and modification times of an AVI, JPEG or raw
file to when the photo was taken, assuming that the camera clock
was set to Universal Time.
.TP
.B -i
Identify files but don't decode them.
Exit status is 0 if
.B dcraw
can decode the last file, 1 if it can't.
.B -i -v
shows metadata.
.TP
.B ""
.B dcraw
cannot decode JPEG files!!
.TP
.B -d
Show the raw data as a grayscale image with no interpolation.
Good for photographing black-and-white documents.
.TP
.B -D
Same as
.BR -d ,
but totally raw (no color scaling).
.TP
.B -h
Output a half-size color image.  Twice as fast as
.BR -q\ 0 .
.TP
.B -q 0
Use high-speed, low-quality bilinear interpolation.
.TP
.B -q 1
Use Variable Number of Gradients (VNG) interpolation.
.TP
.B -q 2
Use Patterned Pixel Grouping (PPG) interpolation.
.TP
.B -q 3
Use Adaptive Homogeneity-Directed (AHD) interpolation.
.TP
.B -f
Interpolate RGB as four colors.  Use this if the output shows
false 2x2 meshes with VNG or mazes with AHD.
.TP
.B -n noise_threshold
Use wavelets to erase noise while preserving real detail.
The best threshold should be somewhere between 100 and 1000.
.TP
.B -b brightness
By default,
.B dcraw
writes 8-bit PGM/PPM/PAM with a BT.709 gamma curve and a
99th-percentile white point.  If the result is too light or
too dark,
.B -b
lets you adjust it.  Default is 1.0.
.TP
.B -4
Write 16-bit linear pseudo-PGM/PPM/PAM with no gamma curve,
no white point, and no
.B -b
option.
.TP
.B -T
Write TIFF output (with metadata) instead of PGM/PPM/PAM.
.TP
.B -k black
Set the black point.  Default depends on the camera.
.TP
.B -K darkframe.pgm
Subtract a dark frame from the raw data.  To generate a
dark frame, shoot a raw photo with no light and do
.BR dcraw\ -D\ -4\ -j\ -t\ 0 .
.TP
.B -w
Use the white balance specified by the camera.
If this is not found, print a warning and use another method.
.TP
.B -a
Calculate the white balance by averaging the entire image.
.TP
.B -A left top width height
Calculate the white balance by averaging a rectangular area.
First do
.B dcraw\ -j\ -t\ 0
and select an area of neutral grey color.
.TP
.B -r mul0 mul1 mul2 mul3
Specify your own raw white balance.
These multipliers can be cut and pasted from the output of
.BR dcraw\ -v .
.TP
no white balance option
Use a fixed white balance based on a color chart illuminated
with a standard D65 lamp.
.TP
.B -M
If the raw metadata contains a color matrix, don't use it.
This option only affects Olympus, Leaf, and Phase One cameras.
.TP
.B -C red_mag blue_mag
Enlarge the raw red and blue layers by the given factors,
typically 0.999 to 1.001, to correct chromatic aberration.
.TP
.B -H 0
Clip all highlights to solid white (default).
.TP
.B -H 1
Leave highlights unclipped in various shades of pink.
.TP
.B -H 2
Blend clipped and unclipped values together for a gradual fade to white.
.TP
.B -H 3-9
Reconstruct highlights.  Low numbers favor whites; high numbers
favor colors.  Try
.B -H 5
as a compromise.  If that's not good enough, do
.BR -H\ 9 ,
cut out the non-white highlights, and paste them into an image
generated with
.BR -H\ 3 .
.TP
.B -m
Same as
.BR -o\ 0 .
.TP
.B -o [0-5]
Select the output colorspace when the
.B -p
option is not used:

.B \t0
\ \ Raw color (unique to each camera)
.br
.B \t1
\ \ sRGB D65 (default)
.br
.B \t2
\ \ Adobe RGB (1998) D65
.br
.B \t3
\ \ Wide Gamut RGB D65
.br
.B \t4
\ \ Kodak ProPhoto RGB D65
.br
.B \t5
\ \ XYZ
.TP
.BR -p\ camera.icm \ [\  -o\ output.icm \ ]
Use ICC profiles to define the camera's raw colorspace and the
desired output colorspace (sRGB by default).
.TP
.B -p embed
Use the ICC profile embedded in the raw photo.
.TP
.B -t [0-7,90,180,270]
Flip the output image.  By default,
.B dcraw
applies the flip specified by the camera.
.B -t 0
disables all flipping.
.TP
.B -s [0-99]
Select which raw image to decode if the file contains more than one.
For example, Fuji\ Super\ CCD\ SR cameras generate a second image
underexposed four stops to show detail in the highlights.
.TP
.B -j
For Fuji\ Super\ CCD cameras, show the image tilted 45 degrees.
For cameras with non-square pixels, do not stretch the image to
its correct aspect ratio.  In any case, this option guarantees
that each output pixel corresponds to one raw pixel.
.TP
.B ""
If they don't apply to your camera,
.B -s
and
.B -j
are silently ignored.
.SH FILES
.TP
\:./.badpixels, ../.badpixels, ../../.badpixels, ...
List of your camera's dead pixels, so that
.B dcraw
can interpolate around them.  Each line specifies the column,
row, and UNIX time of death for one pixel.  For example:
.sp 1
.nf
 962   91 1028350000  # died between August 1 and 4, 2002
1285 1067 0           # don't know when this pixel died
.fi
.sp 1
These coordinates are before any cropping or rotation, so use
.B dcraw -j -t 0
to locate dead pixels.
.SH "SEE ALSO"
.BR pgm (5),
.BR ppm (5),
.BR pam (5),
.BR pnmgamma (1),
.BR pnmtotiff (1),
.BR pnmtopng (1),
.BR gphoto2 (1),
.BR cjpeg (1),
.BR djpeg (1)
.SH AUTHOR
Written by David Coffin, dcoffin a cybercom o net