- pl, unifications

Changed files:
    cisp.spec -> 1.2

diff --git a/cisp.spec b/cisp.spec
index 2730ada10874d3e9e1a8b0da9f818189b610c59a..d75e859f9bbb09c03510bd2cd672548f9c1711a3 100644 (file)
--- a/cisp.spec
+++ b/cisp.spec
@@ -1,13 +1,13 @@
-
 Summary:       Compact In-System Programmer
+Summary(pl):   Zwarty zestaw do programowania
 Name:          cisp
 Version:       1.0.4
 Release:       0.1
 License:       GPL
-URL:           http://www.funet.fi/pub/cbm/crossplatform/transfer/C2N232/
 Group:         Development/Tools
 Source0:       http://www.funet.fi/pub/cbm/crossplatform/transfer/C2N232/firmware/%{name}-%{version}.tar.gz
 # Source0-md5: 60ec135286b551a4ea27c5d5e7d6b90f
+URL:           http://www.funet.fi/pub/cbm/crossplatform/transfer/C2N232/
 BuildRoot:     %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
 
 %description
@@ -18,35 +18,48 @@ Peripheral Interface (SPI).
 
 Nevertheless you could use this programmer software together with
 following hardware components:
+ - c2n232 serial (RESET=DTR SCK=RTS MOSI=TXD MISO=CTS)
+ - dasa serial (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS)
+ - ponyprog serial (RESET=TXD SCK=RTS MOSI=DTR MISO=CTS)
+ - dapa parallel (RESET=INIT SCK=STROBE MOSI=D0 MISO=BUSY)
+ - dt006 parallel (RESET=D2 SCK=D3 MOSI=D0 MISO=BUSY)
+ - stk200 Atmel STK200 Evaluation Board (parallel)
 
-    - c2n232 serial (RESET=DTR SCK=RTS MOSI=TXD MISO=CTS)
-    - dasa serial (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS)
-    - ponyprog serial (RESET=TXD SCK=RTS MOSI=DTR MISO=CTS)
-    - dapa parallel (RESET=INIT SCK=STROBE MOSI=D0 MISO=BUSY)
-    - dt006 parallel (RESET=D2 SCK=D3 MOSI=D0 MISO=BUSY)
-    - stk200 Atmel STK200 Evaluation Board (parallel)
+%description -l pl
+CISP to specjalny zwarty zestaw do programowania dla projektu C2N232
+Marko Mäkelä. CISP przesy³a dane do i z nieulotnej pamiêci programu
+lub danych procesora RISC Atmel AVR po interfejsie szeregowym SPI
+(Serial Peripheral Interface).
+
+Tym niemniej mo¿na u¿ywaæ tego oprogramowania wraz z nastêpuj±cym
+sprzêtem:
+ - szeregowym c2n232 (RESET=DTR SCK=RTS MOSI=TXD MISO=CTS)
+ - szeregowym dasa (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS)
+ - szeregowym ponyprog (RESET=TXD SCK=RTS MOSI=DTR MISO=CTS)
+ - równoleg³ym dapa (RESET=INIT SCK=STROBE MOSI=D0 MISO=BUSY)
+ - równoleg³ym dt006 (RESET=D2 SCK=D3 MOSI=D0 MISO=BUSY)
+ - stk200 Atmel STK200 Evaluation Board (równoleg³ym)
 
 %prep
 %setup -q
 
 %build
-%{__make} -f Makefile.unixpc           \
-       CFLAGS="%{rpmcflags}"           \
-       CXXFLAGS="%{rpmcflags}"         \
-       CC="%{__cc}"                    \
-       CXX="%{__cxx}"                  \
-       PREFIX=%{_prefix}               \
-       BINDIR=%{_bindir}               \
-       MANDIR=%{_mandir}/man1  \
-       all cisp.dvi
+%{__make} -f Makefile.unixpc all cisp.dvi \
+       CFLAGS="%{rpmcflags}" \
+       CXXFLAGS="%{rpmcflags}" \
+       CC="%{__cc}" \
+       CXX="%{__cxx}" \
+       PREFIX=%{_prefix} \
+       BINDIR=%{_bindir} \
+       MANDIR=%{_mandir}/man1
 
 %install
 rm -rf $RPM_BUILD_ROOT
-%{__make}      -f Makefile.unixpc                              \
-       PREFIX=$RPM_BUILD_ROOT%{_prefix}                        \
-       BINDIR=$RPM_BUILD_ROOT%{_bindir}                \
-       MANDIR=$RPM_BUILD_ROOT%{_mandir}/man1   \
-       install installman
+
+%{__make} -f Makefile.unixpc install installman \
+       PREFIX=$RPM_BUILD_ROOT%{_prefix} \
+       BINDIR=$RPM_BUILD_ROOT%{_bindir} \
+       MANDIR=$RPM_BUILD_ROOT%{_mandir}/man1
 
 %clean
 rm -rf $RPM_BUILD_ROOT