Summary:	Compact In-System Programmer
Summary(pl.UTF-8):	Zwarty zestaw do programowania
Name:		cisp
Version:	1.0.4
Release:	0.1
License:	GPL
Group:		Development/Tools
Source0:	http://www.funet.fi/pub/cbm/crossplatform/transfer/C2N232/firmware/%{name}-%{version}.tar.gz
# Source0-md5:	60ec135286b551a4ea27c5d5e7d6b90f
URL:		http://www.funet.fi/pub/cbm/crossplatform/transfer/C2N232/
BuildRoot:	%{tmpdir}/%{name}-%{version}-root-%(id -u -n)

%description
CISP is a special compact In-System Programmer for the C2N232 project
by Marko Maekelae. CISP transfers data to and from the non-volatile
program or data memory of an Atmel AVR RISC processor over the Serial
Peripheral Interface (SPI).

Nevertheless you could use this programmer software together with
following hardware components:
 - c2n232 serial (RESET=DTR SCK=RTS MOSI=TXD MISO=CTS)
 - dasa serial (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS)
 - ponyprog serial (RESET=TXD SCK=RTS MOSI=DTR MISO=CTS)
 - dapa parallel (RESET=INIT SCK=STROBE MOSI=D0 MISO=BUSY)
 - dt006 parallel (RESET=D2 SCK=D3 MOSI=D0 MISO=BUSY)
 - stk200 Atmel STK200 Evaluation Board (parallel)

%description -l en.UTF-8
CISP is a special compact In-System Programmer for the C2N232 project
by Marko Mäkelä. CISP transfers data to and from the non-volatile
program or data memory of an Atmel AVR RISC processor over the Serial
Peripheral Interface (SPI).

Nevertheless you could use this programmer software together with
following hardware components:
 - c2n232 serial (RESET=DTR SCK=RTS MOSI=TXD MISO=CTS)
 - dasa serial (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS)
 - ponyprog serial (RESET=TXD SCK=RTS MOSI=DTR MISO=CTS)
 - dapa parallel (RESET=INIT SCK=STROBE MOSI=D0 MISO=BUSY)
 - dt006 parallel (RESET=D2 SCK=D3 MOSI=D0 MISO=BUSY)
 - stk200 Atmel STK200 Evaluation Board (parallel)

%description -l pl.UTF-8
CISP to specjalny zwarty zestaw do programowania dla projektu C2N232
Marko Mäkelä. CISP przesyła dane do i z nieulotnej pamięci programu
lub danych procesora RISC Atmel AVR po interfejsie szeregowym SPI
(Serial Peripheral Interface).

Tym niemniej można używać tego oprogramowania wraz z następującym
sprzętem:
 - szeregowym c2n232 (RESET=DTR SCK=RTS MOSI=TXD MISO=CTS)
 - szeregowym dasa (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS)
 - szeregowym ponyprog (RESET=TXD SCK=RTS MOSI=DTR MISO=CTS)
 - równoległym dapa (RESET=INIT SCK=STROBE MOSI=D0 MISO=BUSY)
 - równoległym dt006 (RESET=D2 SCK=D3 MOSI=D0 MISO=BUSY)
 - stk200 Atmel STK200 Evaluation Board (równoległym)

%prep
%setup -q

%build
%{__make} -f Makefile.unixpc all cisp.dvi \
	CFLAGS="%{rpmcflags}" \
	CXXFLAGS="%{rpmcflags}" \
	CC="%{__cc}" \
	CXX="%{__cxx}" \
	PREFIX=%{_prefix} \
	BINDIR=%{_bindir} \
	MANDIR=%{_mandir}/man1

%install
rm -rf $RPM_BUILD_ROOT

%{__make} -f Makefile.unixpc install installman \
	PREFIX=$RPM_BUILD_ROOT%{_prefix} \
	BINDIR=$RPM_BUILD_ROOT%{_bindir} \
	MANDIR=$RPM_BUILD_ROOT%{_mandir}/man1

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(644,root,root,755)
%doc ChangeLog
%attr(755,root,root) %{_bindir}/*
%{_mandir}/man1/*