Summary: Power management software for APC UPS hardware
Summary(pl): Oprogramowanie do zarz±dzania energi± dla UPS-ów APC
Name: apcupsd
-Version: 3.10.12
-Release: 0.9
+Version: 3.10.15
+Release: 1
License: GPL v2
Group: Networking/Daemons
Source0: http://dl.sourceforge.net/apcupsd/%{name}-%{version}.tar.gz
-# Source0-md5: 4c35774d587c54276cf03926768ad551
+# Source0-md5: 21b2b744ebcaa0010367a403a9c5e66c
Source1: %{name}.init
Source2: %{name}.logrotate
-Source10: %{name}-rc.d-halt
Patch0: %{name}-configure.patch
URL: http://www.apcupsd.com/
BuildRequires: autoconf
+BuildRequires: automake
Requires(post,preun): /sbin/chkconfig
Requires(post): fileutils
BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
%prep
%setup -q
-%patch0 -p1
+%patch0 -p1
%build
cd autoconf
+cp -f /usr/share/automake/config.sub .
%{__autoconf}
cp -f ./configure ..
cd ..
%configure \
- --with-log-dir=%{_var}/log \
- --with-stat-dir=%{_var}/lib/apcupsd \
+ --with-log-dir=%{_var}/log \
+ --with-stat-dir=%{_var}/lib/apcupsd \
%if %{with usb}
- --enable-usb \
- --with-serial-dev=/dev/usb/hiddev[0-15] \
- --with-upstype=usb \
- --with-upscable=usb
+ --enable-usb \
+ --with-serial-dev=/dev/usb/hiddev[0-15] \
+ --with-upstype=usb \
+ --with-upscable=usb
%endif
%{__make}
%{__make} install \
DESTDIR=$RPM_BUILD_ROOT
-install %{SOURCE10} $RPM_BUILD_ROOT/etc/rc.d/init.d/halt-apcupsd
+
install %{SOURCE1} $RPM_BUILD_ROOT/etc/rc.d/init.d/apcupsd
install %{SOURCE2} $RPM_BUILD_ROOT/etc/logrotate.d/apcupsd
touch $RPM_BUILD_ROOT/var/log/apcupsd.events
touch $RPM_BUILD_ROOT/var/lib/apcupsd/apcupsd.status
+cat > $RPM_BUILD_ROOT/etc/rc.d/init.d/halt << EOF
+#!/bin/sh
+/etc/rc.d/init.d/apcupsd powerdown
+EOF
+
%clean
rm -rf $RPM_BUILD_ROOT
%post
-if [ "$1" = "1" ]; then
- /sbin/chkconfig --add apcupsd
- if [ -e /etc/rc.d/init.d/halt ]; then
- mv -f /etc/rc.d/init.d/halt /etc/rc.d/init.d/halt.rpmorig
- fi
- ln -s /etc/rc.d/init.d/halt-apcupsd /etc/rc.d/init.d/halt
-fi
-
+/sbin/chkconfig --add apcupsd
if [ -f /var/lock/subsys/apcupsd ]; then
- /etc/rc.d/init.d/apcupsd restart >&2
+ /etc/rc.d/init.d/apcupsd restart >&2
else
- echo "Run \"/etc/rc.d/init.d/apcupsd start\" to start apcupsd daemon."
+ echo "Run \"/etc/rc.d/init.d/apcupsd start\" to start apcupsd daemon."
fi
%preun
if [ "$1" = "0" ]; then
- if [ -f /var/lock/subsys/apcupsd ]; then
- /etc/rc.d/init.d/apcupsd stop >&2
- fi
- rm -f /etc/rc.d/init.d/halt
- if [ -e /etc/rc.d/init.d/halt.rpmorig ]; then
- mv -f /etc/rc.d/init.d/halt /etc/rc.d/init.d/halt.rpmorig
- fi
- /sbin/chkconfig --del apcupsd
+ if [ -f /var/lock/subsys/apcupsd ]; then
+ /etc/rc.d/init.d/apcupsd stop >&2
+ fi
+/sbin/chkconfig --del apcupsd
fi
%files
%defattr(644,root,root,755)
-%doc ChangeLog Developers doc/{README.apcaccess,developers_manual,home-page,logo}
+%doc ChangeLog Developers doc/{README.apcaccess,README.solaris}
%{_mandir}/man8/apcupsd.*
%attr(755,root,root) %{_sbindir}/*
-%attr(640,root,root) %config(noreplace) %{_sysconfdir}/apcupsd.conf
+%attr(640,root,root) %config(noreplace) %verify(not md5 size mtime) %{_sysconfdir}/apcupsd.conf
%attr(754,root,root) %{_sysconfdir}/apccontrol
%attr(754,root,root) %{_sysconfdir}/changeme
%attr(754,root,root) %{_sysconfdir}/commfailure
%attr(754,root,root) %{_sysconfdir}/mastertimeout
%attr(754,root,root) %{_sysconfdir}/onbattery
%attr(754,root,root) /etc/rc.d/init.d/apcupsd
-%attr(754,root,root) /etc/rc.d/init.d/halt-apcupsd
+%attr(754,root,root) /etc/rc.d/init.d/halt
%attr(640,root,root) /etc/logrotate.d/apcupsd
+%dir /etc/apcupsd
%dir /var/lib/apcupsd
%attr(640,root,root) %ghost /var/log/apcupsd.events
%attr(640,root,root) %ghost /var/lib/apcupsd/apcupsd.status