- up to 2.4.59

[packages/apache.git] / apache-mod_ssl.conf

LoadModule ssl_module   modules/mod_ssl.so

# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>

<IfModule mod_ssl.c>
#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#

SSLRandomSeed startup file:/dev/urandom  256
SSLRandomSeed connect builtin

#SSLRandomSeed startup file:/dev/random  512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random  512
#SSLRandomSeed connect file:/dev/urandom 512


#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
#          Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen 443

##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##

#   Pass Phrase Dialog:
#   Configure the pass phrase gathering process.
#   The filtering dialog program (`builtin' is a internal
#   terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog  builtin

#   Inter-Process Session Cache:
#   Configure the SSL Session Cache: First the mechanism
#   to use and second the expiring timeout (in seconds).
#SSLSessionCache                 dbm:/var/cache/httpd/ssl_scache
#SSLSessionCache                shmcb:/var/run/ssl_scache(512000)
SSLSessionCache         shmcb:/var/cache/httpd/ssl_scache(512000)
SSLSessionCacheTimeout  300

# FOLLOW SECURE DEFAULTS: https://wiki.mozilla.org/Security/Server_Side_TLS

#   Usable SSL protocol flavors:
#   This directive can be used to control the SSL protocol flavors mod_ssl
#   should use when establishing its server environment. Clients then can only
#   connect with one of the provided protocols.
SSLProtocol all -SSLv2 -SSLv3

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_ssl documentation for a complete list.
SSLCipherSuite ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA

SSLHonorCipherOrder on

SSLCompression off

# OCSP Stapling
SSLUseStapling          off
SSLStaplingResponderTimeout 5
SSLStaplingReturnResponderErrors off
SSLStaplingCache        shmcb:/var/cache/httpd/ocsp(128000)

# Whether to allow non-SNI clients to access a name-based virtual host.
#SSLStrictSNIVHostCheck on

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>
#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
SSLEngine on

# Enable, if you have real ssl cert and want to cache OCSP
# https://www.digitalocean.com/community/tutorials/how-to-configure-ocsp-stapling-on-apache-and-nginx
SSLUseStapling          off

#   Server Certificate:
#   Point SSLCertificateFile at a PEM encoded certificate.  If
#   the certificate is encrypted, then you will be prompted for a
#   pass phrase.  Note that a kill -HUP will prompt again.  Keep
#   in mind that if you have both an RSA and a DSA certificate you
#   can configure both in parallel (to also allow the use of DSA
#   ciphers, etc.)
SSLCertificateFile /etc/httpd/ssl/server.crt
#SSLCertificateFile /etc/httpd/ssl/server-dsa.crt

#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/httpd/ssl/server.key
#SSLCertificateKeyFile /etc/httpd/ssl/server-dsa.key

#   Server Certificate Chain:
#   Point SSLCertificateChainFile at a file containing the
#   concatenation of PEM encoded CA certificates which form the
#   certificate chain for the server certificate. Alternatively
#   the referenced file can be the same as SSLCertificateFile
#   when the CA certificates are directly appended to the server
#   certificate for convinience.
#SSLCertificateChainFile /etc/httpd/ssl/ca.crt

#   Certificate Authority (CA):
#   Set the CA certificate verification path where to find CA
#   certificates for client authentication or alternatively one
#   huge file containing all of them (file must be PEM encoded)
#   Note: Inside SSLCACertificatePath you need hash symlinks
#                to point to the certificate files. Use the provided
#                Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/httpd/ssl
#SSLCACertificateFile /etc/httpd/ssl/ca-bundle.crt

#   Certificate Revocation Lists (CRL):
#   Set the CA revocation path where to find CA CRLs for client
#   authentication or alternatively one huge file containing all
#   of them (file must be PEM encoded)
#   Note: Inside SSLCARevocationPath you need hash symlinks
#                to point to the certificate files. Use the provided
#                Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/httpd/ssl
#SSLCARevocationFile /etc/httpd/ssl/ca-bundle.crl

#   Client Authentication (Type):
#   Client certificate verification type and depth.  Types are
#   none, optional, require and optional_no_ca.  Depth is a
#   number which specifies how deeply to verify the certificate
#   issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_ssl documentation
#   for more details.
#<Location />
#SSLRequire (   %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#                       and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#                       and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#                       and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#                       and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#                  or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#        Translate the client X.509 into a Basic Authorisation.  This means that
#        the standard Auth/DBMAuth methods can be used for access control.  The
#        user name is the `one line' version of the client's X.509 certificate.
#        Note that no password is obtained from the user. Every entry in the user
#        file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#        This exports two additional environment variables: SSL_CLIENT_CERT and
#        SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#        server (always existing) and the client (only existing when client
#        authentication is used). This can be used to import the certificates
#        into CGI scripts.
#   o StdEnvVars:
#        This exports the standard SSL/TLS related `SSL_*' environment variables.
#        Per default this exportation is switched off for performance reasons,
#        because the extraction step is an expensive operation and is usually
#        useless for serving static content. So one usually enables the
#        exportation for CGI and SSI requests only.
#   o StrictRequire:
#        This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#        under a "Satisfy any" situation, i.e. when it applies access is denied
#        and no other module can change it.
#   o OptRenegotiate:
#        This enables optimized SSL connection renegotiation handling when SSL
#        directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
        SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/home/services/httpd/cgi-bin">
        SSLOptions +StdEnvVars
</Directory>

#   SSL Protocol Adjustments:
#   The safe and default but still SSL/TLS standard compliant shutdown
#   approach is that mod_ssl sends the close notify alert but doesn't wait for
#   the close notify alert from client. When you need a different shutdown
#   approach you can use one of the following variables:
#   o ssl-unclean-shutdown:
#        This forces an unclean shutdown when the connection is closed, i.e. no
#        SSL close notify alert is send or allowed to received.  This violates
#        the SSL/TLS standard but is needed for some brain-dead browsers. Use
#        this when you receive I/O errors because of the standard approach where
#        mod_ssl sends the close notify alert.
#   o ssl-accurate-shutdown:
#        This forces an accurate shutdown when the connection is closed, i.e. a
#        SSL close notify alert is send and mod_ssl waits for the close notify
#        alert of the client. This is 100% SSL/TLS standard compliant, but in
#        practice often causes hanging connections with brain-dead browsers. Use
#        this only for browsers where you know that their SSL implementation
#        works correctly.
#   Notice: Most problems of broken clients are also related to the HTTP
#   keep-alive facility, so you usually additionally want to disable
#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
#   "force-response-1.0" for this.
<IfModule mod_setenvif.c>
        BrowserMatch ".*MSIE [2-5]\..*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
        BrowserMatch ".*MSIE [6-9]\..*" ssl-unclean-shutdown
</IfModule>

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
#<IfModule mod_log_config.c>
#       CustomLog logs/ssl_request_log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#       # enable common log too, otherwise you be suprised of no access logs
#       CustomLog logs/access_log common
#</IfModule>

</VirtualHost>

</IfModule>