- updated to 1.1.3

- added missing patch (missing file from git)

diff --git a/alsa-utils-missing.patch b/alsa-utils-missing.patch
new file mode 100644 (file)
index 0000000..e75f366
--- /dev/null
+++ b/alsa-utils-missing.patch
@@ -0,0 +1,238 @@
+--- alsa-utils-1.1.3/alsaucm/alsaucm.rst.orig  1970-01-01 01:00:00.000000000 +0100
++++ alsa-utils-1.1.3/alsaucm/alsaucm.rst       2017-01-21 19:55:20.071432145 +0100
+@@ -0,0 +1,235 @@
++=========
++ alsaucm
++=========
++
++---------------------
++ALSA Use Case Manager
++---------------------
++
++:Author: Antonio Ospite <ao2@ao2.it>
++:Date:   2016-09-22
++:Copyright: GPLv2+
++:Manual section: 1
++:Manual group: General Commands Manual
++
++SYNOPSIS
++========
++
++*alsaucm* <options> [command]
++
++DESCRIPTION
++===========
++
++alsaucm (ALSA Use Case Manager) is a program to use the ALSA `Use Case
++Interface`_ from the command line.
++
++On complex sound cards, setting up audio routes is not trivial and mixer
++settings can conflict one another preventing the audio card to work at all.
++
++The ALSA Use Case Manager is a mechanism for controlling complex audio
++hardware establishing a relationship between hardware configurations and
++meaningful use cases that the end-user can relate with.
++
++The use case manager can also be used to switch between use cases when
++necessary, in a consistent way.
++
++At a lower level, the use case manager works by configuring the sound card
++ALSA kcontrols to change the hardware digital and analog audio routing to
++match the requested device use case.
++
++The use case manager kcontrol configurations are stored in easy to modify text
++files. An audio use case can be defined by a **verb** and **device** parameter.
++
++The verb describes the use case action i.e. a phone call, listening to music,
++recording a conversation etc. The device describes the physical audio capture
++and playback hardware i.e. headphones, phone handset, bluetooth headset, etc.
++
++
++OPTIONS
++=======
++
++Available options:
++
++  **-h**, **--help**
++    this help
++
++  **-c**, **--card** `NAME`
++    open card NAME
++
++  **-i**, **--interactive**
++    interactive mode
++
++  **-b**, **--batch** `FILE`
++    batch mode (use ``'-'`` for the stdin input)
++
++  **-n**, **--no-open**
++    do not open first card found
++
++
++Available commands:
++
++  ``open`` `NAME`
++    open card NAME.
++
++    valid names are sound card names as listed in ``/usr/share/alsa/ucm``.
++
++  ``reset``
++    reset sound card to default state.
++
++  ``reload``
++    reload configuration.
++
++  ``listcards``
++    list available cards.
++
++  ``list`` `IDENTIFIER`
++    list command, for items returning two entries (value+comment).
++
++    the value of the `IDENTIFIER` argument can can be:
++
++    - ``_verbs`` - get verb list (in pair verb+comment)
++    - ``_devices[/{verb}]`` - get list of supported devices (in pair device+comment)
++    - ``_modifiers[/{verb}]`` - get list of supported modifiers (in pair modifier+comment)
++
++    The forms without the trailing ``/{verb}`` are valid only after a specific
++    verb has been set.
++
++  ``list1`` `IDENTIFIER`
++    list command, for lists returning one item per entry.
++
++    the value of the `IDENTIFIER` argument can vary depending on the context,
++    it can be:
++
++    - ``TQ[/{verb}]`` - get list of Tone Quality identifiers
++    - ``_enadevs`` - get list of enabled devices
++    - ``_enamods`` - get list of enabled modifiers
++    - ``_supporteddevs/{modifier}|{device}[/{verb}]`` - list of supported devices
++    - ``_conflictingdevs/{modifier}|{device}[/{verb}]`` - list of conflicting devices
++
++  ``get`` `IDENTIFIER`
++    get string value.
++
++    the value of the `IDENTIFIER` argument can can be:
++
++    - ``_verb`` - return current verb
++    - ``[=]{NAME}[/[{modifier}|{/device}][/{verb}]]`` (For valid NAMEs look at the
++      ALSA `Use Case Interface`_)
++
++
++  ``geti`` `IDENTIFIER`
++    get integer value.
++
++    the value of the `IDENTIFIER` argument can can be:
++
++    - ``_devstatus/{device}``
++    - ``_modtstaus/{device}``
++
++  ``set`` `IDENTIFIER` `VALUE`
++    set string value
++
++    The value of the `IDENTIFIER` argument can can be:
++
++    - ``_verb`` - set the verb to `VALUE`
++    - ``_enadev`` - enable the device specified by `VALUE`
++    - ``_disdev`` - disable the device specified by `VALUE`
++    - ``_swdev/{old_device}`` - switche device:
++
++      - disable `old_device` and then enable the device specified by
++        `VALUE`
++      - if no device was enabled just return
++
++    - ``_enamod`` - enable the modifier specified by `VALUE`
++    - ``_dismod`` - disable the modifier specified by `VALUE`
++    - ``_swmod/{old_modifier}`` - switch modifier:
++
++      - disable `old_modifier` and then enable the modifier specified by
++        `VALUE`
++      - if no modifier was enabled just return
++
++    Note that the identifiers referring to devices and modifiers are valid
++    only after setting a verb.
++
++  ``h``, ``help``
++    help
++
++  ``q``, ``quit``
++    quit
++
++
++FILES
++=====
++
++The master use case files for each supported sound card are in ``/usr/share/alsa/ucm``.
++
++For example, the master use case file for the `Pandaboard` card is in
++``/usr/share/alsa/ucm/PandaBoard/PandaBoard.conf``, this file lists all the
++supported use cases, e.g.
++
++::
++
++  SectionUseCase."HiFi" {
++                  File "hifi"
++                  Comment "Play HiFi quality Music."
++  }
++  ...
++
++
++Each use case defines a _verb, which is described in the file specified in
++the ``File`` directive, like above.
++
++The ``HiFi`` verb above is described in
++``/usr/share/alsa/ucm/PandaBoard/hifi``.
++
++For more details on the syntax of UCM files, see the alsa-lib source code:
++http://git.alsa-project.org/?p=alsa-lib.git;a=blob;f=src/ucm/parser.c
++
++
++EXAMPLES OF USE
++===============
++
++Some commands, like for instance ``list _devices``,
++can only work after setting a ``_verb`` in the **same execution**, for
++instance this sequence doesn't work:
++
++::
++
++  # alsaucm -c bytcr-rt5640 set _verb HiFi
++  # alsaucm -c bytcr-rt5640 list _devices
++
++
++However this command does:
++
++::
++
++  # alsaucm -n -b - <<EOM
++  open bytcr-rt5640
++  set _verb HiFi
++  list _devices
++  EOM
++
++
++An example of setting the `Speaker` device for the `HiFi` verb of the
++`bytcr-rt5640` card:
++
++::
++
++  # alsaucm -n -b - <<EOM
++  open bytcr-rt5640
++  reset
++  set _verb HiFi
++  set _enadev Speaker
++  EOM
++
++
++
++SEE ALSO
++========
++
++* Use Case Interface: http://www.alsa-project.org/alsa-doc/alsa-lib/group__ucm.html
++
++.. _Use Case Interface: http://www.alsa-project.org/alsa-doc/alsa-lib/group__ucm.html
++
++BUGS
++====
++
++None known.

diff --git a/alsa-utils.spec b/alsa-utils.spec
index 77c3e0367c0eba3edf608447466b09b2db9c05cb..5dea47e334c2c595bd416a6b4b679840e95b1f86 100644 (file)
--- a/alsa-utils.spec
+++ b/alsa-utils.spec
@@ -5,23 +5,26 @@ Summary(pt_BR.UTF-8): Utilitários para o ALSA (Advanced Linux Sound Architectur
 Summary(ru.UTF-8):     Утилиты командной строки для ALSA project
 Summary(uk.UTF-8):     Утиліти командного рядка для ALSA project
 Name:          alsa-utils
-Version:       1.1.2
+Version:       1.1.3
 Release:       1
 # some apps GPL v2, some GPL v2+
 License:       GPL v2
 Group:         Applications/Sound
 Source0:       ftp://ftp.alsa-project.org/pub/utils/%{name}-%{version}.tar.bz2
-# Source0-md5: 38ac7c781f80c41c02b4664d8cbafa87
+# Source0-md5: 2bf94d3e3410dcc74bb0dae10d46a979
 Source1:       alsasound.init
 # does anything use this (probably outdated) file? not alsasound.init
 Source2:       alsa-oss-pcm
 Source3:       alsactl.conf
 Patch0:                %{name}-fast_sampling.patch
 Patch1:                %{name}-modprobe.patch
+Patch2:                %{name}-missing.patch
 URL:           http://www.alsa-project.org/
 BuildRequires: alsa-lib-devel >= 1.0.27
 BuildRequires: autoconf >= 2.59
 BuildRequires: automake
+# rst2man
+BuildRequires: docutils
 BuildRequires: fftw3-devel >= 3
 BuildRequires: gettext-tools >= 0.15
 BuildRequires: libsamplerate-devel >= 0.1.3
@@ -105,6 +108,7 @@ Skrypt init dla Advanced Linux Sound Architecture.
 %setup -q
 %patch0 -p1
 %patch1 -p1
+%patch2 -p1
 
 %build
 %{__gettextize}
@@ -212,6 +216,7 @@ fi
 %{_mandir}/man1/alsactl.1*
 %{_mandir}/man1/alsaloop.1*
 %{_mandir}/man1/alsamixer.1*
+%{_mandir}/man1/alsaucm.1*
 %{_mandir}/man1/amidi.1*
 %{_mandir}/man1/amixer.1*
 %{_mandir}/man1/aplay.1*