--- /dev/null
+#!/bin/sh
+#
+# Copyright 1999 American Power Conversion, All Rights Reserved
+#
+# Description: This file is used to configure PowerChute Plus
+# for Linux.
+#
+# Usage: ./Config - will configure PowerChute PLUS after
+# installing it from an RPM archive
+#
+#
+
+###################
+# Global Constants
+###################
+# --------------------------------------------------------------------------
+# Do not change definitons for TRUE and FALSE from below, or '&&' shell logic
+# will fail. TRUE=0 and FALSE!=0 is shell convention
+# --------------------------------------------------------------------------
+FALSE=1
+TRUE=0
+
+YES=0
+NO=1
+QUIT=2
+INVALID=99
+
+SMART="smart"
+SIMPLE="simple"
+PNP="PNP"
+NORMAL="Normal"
+
+NOT_SYM1="Bad battery"
+SYM=""
+NOT_SYM2="UPS on bypass"
+SYM2="UPS"
+NOT_SYM3=""
+SYM10="TimeOutFactor = 20"
+SYM11="UPS system is in maintenance bypass set by switch"
+NOT_SYM4="UPS on bypass: user set via rear switch"
+SYM5="Actions = LUS"
+NOT_SYM5="Actions = LU"
+
+FULL_PROD_NAME="PowerChute Plus for Unix"
+PROD_HEADER="4.5.2"
+INST_SCRIPT_NAME=$0
+LINUX_INTEL_STRING="Linux"
+OS_NAME="$LINUX_INTEL_STRING"
+MONO_WARN_COLOR_STRING="WarningColor = LightGray"
+MONO_ERR_COLOR_STRING="ErrorColor = LightGray"
+TTY1="/dev/ttyS0"
+TTY2="/dev/ttyS1"
+SHUTDOWN_SEARCH_STRING="swapoff -a"
+STARTUP_FILE_PATH="/etc/rc.d/init.d"
+STARTUP_FILE="$STARTUP_FILE_PATH/upsd"
+STARTUP_RC_PATH="/etc/rc.d"
+MODEM_ALLOWED_PORT_NAMES="/dev/modem,/dev/ttyS0,/dev/ttyS1"
+MODEM_PORT_NAME="/dev/modem"
+SHUTDOWN_FILE="/etc/rc.d/init.d/halt"
+SHUTDOWN_FILE_BACKUP="/usr/lib/powerchute/halt"
+SHUTDOWN_COMMAND_STRING="if [ -r /upsoff.cmd ] #POWERCHUTE\\
+ then #POWERCHUTE\\
+ . ./upsoff.cmd >/dev/null #POWERCHUTE\\
+ rm -f /upsoff.cmd #POWERCHUTE\\
+ fi #POWERCHUTE\\
+ "
+
+
+COMM_VERIFIED=$FALSE
+IS_MODEM_PORT=$FALSE
+IS_LOCAL_PORT=$FALSE
+SKIP_PORT_VERIFICATION=$FALSE
+
+# Variables that start uninitialized
+ALLOWED_PORT_NAMES=
+APC_HARDWARE_PROD=
+CABLE_TYPE=
+INST_HARDWARE=
+INST_TTY=
+MEASURE_UPS=
+ROOT_USER=
+RUN_COMMAND_FILES_AS_ROOT=
+SEND_EMAIL_AS_ROOT=
+SIGNAL_TYPE=
+UI_MONO_COLOR_SCHEME=
+USE_TCP=
+VALID_TTY_SELECTED=
+WEB_BROWSER=
+
+#######################
+# Functions used below
+#######################
+
+###########################################################################
+# IsYN handles Yes No responses
+###########################################################################
+Echo() {
+
+ tmp_name=`uname -s`
+ string="$1"
+
+ if [ "$tmp_name" = "Linux" ]
+ then
+ echo -e "$string"
+ elif [ -r /usr/5bin/echo ]
+ then
+ /usr/5bin/echo "$string"
+ else
+ echo "$string"
+ fi
+}
+
+
+echo_line() {
+ Echo "----------------------------------------------------------------------------"
+}
+
+
+
+HitAnyKey() {
+ default="Press Enter to continue"
+ string=${1:-$default}
+ Echo "$string \\c"
+ read tmp_strike
+}
+
+
+beep() {
+ Echo "\a\\c"
+}
+
+IsYN(){
+ VALID_YN=$FALSE
+ YN=
+ rval=
+ Echo "[y/n] \\c"
+ read YN
+ if [ -z "$YN" ]
+ then
+ VALID_YN=$FALSE
+ rval=$INVALID
+ else
+ case "$YN" in
+ [Yy]*)
+ VALID_YN=$TRUE
+ rval=$YES
+ ;;
+ [Nn]*)
+ VALID_YN=$TRUE
+ rval=$NO
+ ;;
+ *)
+ VALID_YN=$FALSE
+ rval=$INVALID
+ ;;
+ esac
+ fi
+ if [ $rval -eq $INVALID ]
+ then
+ beep
+ Echo "Invalid Response..."
+ fi
+ return $rval
+}
+
+
+IsYNLoop() {
+ rval=$INVALID
+ query_string="$1"
+ valid_response=$FALSE
+ while [ $valid_response -eq $FALSE ]
+ do
+ Echo "$query_string \\c"
+ IsYN
+ rval=$?
+ case "$rval" in
+ $YES|$NO)
+ valid_response=$TRUE
+ ;;
+ esac
+ done
+ return $rval
+}
+
+CheckEepromUps() {
+
+ eeprom=$1
+ dev_name=$2
+ set `./ups_adjust -in -d$dev_name -c$eeprom -t$CABLE_TYPE 2>/dev/null`
+ while [ ! -z "$2" ]
+ do
+ if [ "$1" = "FV" ]
+ then
+ firmware="$2"
+ elif [ "$1" = "2G+" ]
+ then
+ if [ "$2" = "TRUE" ]
+ then
+ Is2g=$TRUE
+ else
+ Is2g=$FALSE
+ fi
+ elif [ "$1" = "VAL" ]
+ then
+ current=$2
+ fi
+ shift;
+ shift;
+ done
+ if [ $Is2g -eq $TRUE ]
+ then
+ if [ `expr $current \> 20` -eq 1 ]
+ then
+ rval=$FALSE
+ else
+ rval=$TRUE
+ fi
+ else
+ rval=$FALSE
+ fi
+ return $rval
+}
+
+CheckDipSwitches() {
+
+ dev_name=$1
+ okay_flag=$FALSE
+ rval=$FALSE
+
+ while [ $okay_flag -eq $FALSE ]
+ do
+ set `./ups_adjust -sn -d$dev_name -c7 -t$CABLE_TYPE 2>/dev/null`
+ if [ "$2" != "NA" ]
+ then
+ if [ -z "$2" ] || [ $2 -ne 0 ]
+ then
+ echo_line
+ beep
+ Echo "Your UPS will not accept an attempt to change its eeproms."
+ Echo "If your UPS has dip switches on the back panel, check that they are all in"
+ Echo "'On' position. After installation, you can set them back to their"
+ Echo "original state if you wish."
+ echo_line
+ continue_loop_flag=$TRUE
+ while [ $continue_loop_flag -eq $TRUE ]
+ do
+ Echo "Do you wish to Retry setting this value, or Continue on with"
+ Echo "the installation? [R/C] \\c"
+ read response
+ if [ -z "$response" ]
+ then
+ beep
+ Echo "Invalid response..."
+ else
+ case "$response" in
+ [Cc]*)
+ continue_loop_flag=$FALSE
+ okay_flag=$TRUE
+ ;;
+ [Rr]*)
+ continue_loop_flag=$FALSE
+ okay_flag=$FALSE
+ Echo
+ ;;
+ *)
+ beep
+ Echo "Invalid Response..."
+ ;;
+ esac
+ fi
+ done
+
+ else
+ okay_flag=$TRUE
+ rval=$TRUE
+ fi
+ else
+ okay_flag=$TRUE
+ rval=$TRUE
+ fi
+ done
+ return $rval
+}
+
+# This function takes an eeprom and a device name and
+# it determines the current setting of the eeprom and
+# returns this value. It returns -1 on error.
+GetCurrentEepromSetting() {
+ eeprom=$1
+ dev_name=$2
+
+ ret_val="-1"
+ set `./ups_adjust -in -d$dev_name -c$eeprom -t$CABLE_TYPE 2>/dev/null`
+
+ while [ "$1" ]
+ do
+ if [ "$1" = "VAL" ]
+ then
+ if [ -n "$2" ]
+ then
+ ret_val="$2"
+ fi
+ fi
+ shift
+ done
+ return $ret_val
+}
+
+
+# This functions takes an eeprom, a check value, and a device
+# name and it determines the next valid eeprom setting value
+# greater than the check value.
+GetNextEepromValueGreaterThan() {
+ eeprom=$1
+ check_value=$2
+ dev_name=$3
+
+ ret_val=-1
+ starting_val=-1
+ GetCurrentEepromSetting $eeprom $dev_name
+ starting_val="$?"
+
+ if [ "$starting_val" -ne "-1" ]
+ then
+ done=$FALSE
+ previous_val=$starting_val
+ while [ $done -eq $FALSE ]
+ do
+ set `./ups_adjust -sn -d$dev_name -c$eeprom -t$CABLE_TYPE 2>/dev/null`
+ if [ "$2" -eq "$starting_val" ]
+ then
+ done=$TRUE
+ else
+ if [ "$2" -gt "$check_value" ]
+ then
+ if [ "$2" -lt "$previous_val" ]
+ then
+ ret_val="$2"
+ fi
+ fi
+ fi
+ previous_val="$2"
+ Echo ".\\c"
+ done
+ fi
+
+ return $ret_val
+}
+
+
+CycleUntilAcceptableValue() {
+
+ eeprom=$1
+ current_value=$2
+ desired_value=$3
+ dev_name=$4
+ okay_flag=$FALSE
+ rval=$FALSE
+
+ while [ $okay_flag -eq $FALSE ]
+ do
+ Echo ".\\c"
+ set `./ups_adjust -sn -d$dev_name -c$eeprom -t$CABLE_TYPE 2>/dev/null`
+ if [ "$2" -eq "$desired_value" ]
+ then
+ okay_flag=$TRUE
+ rval=$TRUE
+ elif [ "$2" -eq "$current_value" ]
+ then
+ #We either can't change the value, or we are back
+ #where we started and our desired value never turned up
+ okay_flag=$TRUE
+ echo_line
+ beep
+ Echo "Unable to modify the value of this eeprom. If you are unable to"
+ Echo "change this value through the powerchute user interface, refer to the UPS"
+ Echo "manual, or contact APC Technical Support."
+ echo_line
+ HitAnyKey
+ fi
+ done
+ Echo
+}
+
+CopyOutToIn() {
+ cp /tmp/temp_ini.out /tmp/temp_ini.in
+}
+
+
+#######################################################################
+# Trap signals so we can clean up temp files
+#######################################################################
+
+trap 'Echo \\nsignal caught, Quitting.;exit' 1 2 15
+
+# ---------------------------------------------------------------------
+# ----------------------------- Start ---------------------------------
+# ---------------------------------------------------------------------
+cd /usr/lib/powerchute
+
+
+#######################################################################
+# Print Banner
+#######################################################################
+Echo "-----------------------------------------------------------------------"
+Echo " PowerChute Plus for Linux v$PROD_HEADER Configuration Script"
+Echo " Copyright American Power Conversion 1999"
+Echo "-----------------------------------------------------------------------"
+Echo
+
+#######################################################################
+# Verify root authority
+#######################################################################
+
+ root_string=`id | grep root`
+
+ if [ -z "$root_string" ]
+ then
+ ROOT_USER=$FALSE
+ echo_line
+ beep
+ Echo "$INST_SCRIPT_NAME must be run with root privileges!"
+ echo_line
+ echo_line
+ IsYNLoop "Do you wish to continue anyway?"
+ case "$?" in
+ $NO)
+ exit
+ ;;
+ esac
+ else
+ ROOT_USER=$TRUE
+ fi
+
+
+#######################################################################
+# Select an APC Hardware Product
+#######################################################################
+
+ VALID_HARDWARE_SELECTED=$FALSE
+ INST_HARDWARE=
+ while [ $VALID_HARDWARE_SELECTED -eq $FALSE ]
+ do
+ Echo
+ Echo " 1) Matrix-UPS"
+ Echo " 2) Smart-UPS"
+ Echo " 3) Back-UPS"
+ Echo " 4) Back-UPS Pro"
+ Echo " 5) Symmetra Power Array"
+ Echo " 6) Smart-UPS DP"
+ Echo " "
+ Echo "Which APC Hardware will $FULL_PROD_NAME be running with [?] \\c"
+ read INST_HARDWARE
+ case "$INST_HARDWARE" in
+ 1)
+ VALID_HARDWARE_SELECTED=$TRUE
+ APC_HARDWARE_PROD="Matrix"
+ SIGNAL_TYPE=$SMART
+ CABLE_TYPE=$NORMAL
+ SYMSTR1=$NOT_SYM1
+ SYMSTR2=$NOT_SYM2
+ SYMSTR13=$NOT_SYM3
+ SYMSTR14=$NOT_SYM4
+ SYMSTR3=$SYM5
+
+ ;;
+ 2)
+ VALID_HARDWARE_SELECTED=$TRUE
+ APC_HARDWARE_PROD="SmartUps"
+ SIGNAL_TYPE=$SMART
+ CABLE_TYPE=$NORMAL
+ SYMSTR1=$NOT_SYM1
+ SYMSTR2=$NOT_SYM2
+ SYMSTR13=$NOT_SYM3
+ SYMSTR14=$NOT_SYM4
+ SYMSTR3=$SYM5
+ ;;
+ 3)
+ VALID_HARDWARE_SELECTED=$TRUE
+ APC_HARDWARE_PROD="BackUps"
+ SIGNAL_TYPE=$SIMPLE
+ CABLE_TYPE=$SIMPLE
+ SYMSTR1=$NOT_SYM1
+ SYMSTR2=$NOT_SYM2
+ SYMSTR13=$NOT_SYM3
+ SYMSTR14=$NOT_SYM4
+ SYMSTR3=$SYM5
+ # No way to verify comm for simple sig, assume
+ # OK to skip warning banner
+ COMM_VERIFIED=$TRUE
+ IS_MODEM_PORT=$TRUE
+ ;;
+ 4)
+ VALID_HARDWARE_SELECTED=$TRUE
+ APC_HARDWARE_PROD="SmartUps"
+ SIGNAL_TYPE=$SMART
+ CABLE_TYPE=$PNP
+ SYMSTR1=$NOT_SYM1
+ SYMSTR2=$NOT_SYM2
+ SYMSTR13=$NOT_SYM3
+ SYMSTR14=$NOT_SYM4
+ SYMSTR3=$SYM5
+ ;;
+ 5)
+ VALID_HARDWARE_SELECTED=$TRUE
+ APC_HARDWARE_PROD="Symmetra"
+ SIGNAL_TYPE=$SMART
+ CABLE_TYPE=$NORMAL
+ SYMSTR1=$SYM1
+ SYMSTR2=$SYM2
+ SYMSTR13=$SYM10
+ SYMSTR14=$SYM11
+ SYMSTR3=$NOT_SYM5
+ ;;
+ 6)
+ VALID_HARDWARE_SELECTED=$TRUE
+ APC_HARDWARE_PROD="SmartUps"
+ SIGNAL_TYPE=$SMART
+ CABLE_TYPE=$NORMAL
+ SYMSTR1=$NOT_SYM1
+ SYMSTR2=$NOT_SYM2
+ SYMSTR13=$NOT_SYM3
+ SYMSTR14=$NOT_SYM4
+ SYMSTR3=$SYM5
+ ;;
+ *)
+ VALID_HARDWARE_SELECTED=$FALSE
+ beep
+ Echo "Invalid Selection...."
+ esac
+ done
+
+
+#######################################################################
+# Ask about MeasureUps
+#######################################################################
+
+ if [ $SIGNAL_TYPE = $SMART ]
+ then
+ Echo
+ echo_line
+ Echo "The Measure-UPS is a device which is designed to perform environmental "
+ Echo "monitoring in conjunction with $FULL_PROD_NAME"
+ echo_line
+
+ Echo
+ IsYNLoop "Do you currently have a Measure-UPS attached to the UPS?"
+ case "$?" in
+ $YES)
+ MEASURE_UPS=$TRUE
+ ;;
+ $NO)
+ MEASURE_UPS=$FALSE
+ ;;
+ esac
+
+ else
+ MEASURE_UPS=$FALSE
+ fi
+
+
+#######################################################################
+# Ask about TCP/IP
+#######################################################################
+
+ Echo
+ echo_line
+ Echo "$FULL_PROD_NAME is able to monitor other hosts. However, in order"
+ Echo "to monitor other hosts TCP/IP must be installed. If you do not have"
+ Echo "TCP/IP installed, answer 'n' to the following question."
+ echo_line
+ Echo
+ IsYNLoop "Do you currently have TCP/IP Installed?"
+ case "$?" in
+ $YES)
+ USE_TCP=$TRUE
+ ;;
+ $NO)
+ USE_TCP=$FALSE
+ ;;
+ esac
+
+############################################################################
+# Ask about coloring schemes...
+############################################################################
+ Echo
+ echo_line
+ Echo "If you will be using the Motif version of the User Interface on a "
+ Echo "monochrome monitor, using the Monochrome Coloring scheme is recommended."
+ Echo
+ echo_line
+ Echo " 1) Use Default Color scheme"
+ Echo " 2) Use Monochrome Color scheme"
+ echo
+ valid_color_scheme=$FALSE
+ while [ $valid_color_scheme -eq $FALSE ]
+ do
+ Echo "Which color scheme do you wish to use [1]? \\c"
+ read color_scheme
+ if [ -z "$color_scheme" ] || [ "$color_scheme" = "1" ]
+ then
+ valid_color_scheme=$TRUE
+ UI_MONO_COLOR_SCHEME=$FALSE
+ else
+ if [ "$color_scheme" = "2" ]
+ then
+ UI_MONO_COLOR_SCHEME=$TRUE
+ valid_color_scheme=$TRUE
+ else
+ valid_color_scheme=$FALSE
+ fi
+ fi
+ done
+
+
+#######################################################################
+# Select communications port
+#######################################################################
+
+ Echo
+ echo_line
+ Echo "$FULL_PROD_NAME requires complete control of the serial port. No"
+ Echo "processes, including gettys, are allowed to be accessing the port."
+ Echo "Therefore, the serial port you select must NOT be enabled for logins. To"
+ Echo "ensure that $FULL_PROD_NAME has control of the serial port, make"
+ Echo "sure that it is not enabled for logins. To disable the port for logins"
+ Echo "consult the $FULL_PROD_NAME manual."
+ echo_line
+ Echo
+ VALID_TTY_SELECTED=$FALSE
+ TTY_NUM=
+ while [ $VALID_TTY_SELECTED -eq $FALSE ]
+ do
+ Echo
+ Echo " 1) $TTY1"
+ Echo " 2) $TTY2"
+ Echo " 3) Other"
+ Echo
+ Echo "Which serial device will be dedicated to $FULL_PROD_NAME [?] \\c"
+ read TTY_NUM
+ case "$TTY_NUM" in
+ 1)
+ ALLOWED_PORT_NAMES="$TTY1,$TTY2"
+ INST_TTY=$TTY1
+ VALID_TTY_SELECTED=$TRUE
+ ;;
+ 2)
+ ALLOWED_PORT_NAMES="$TTY1,$TTY2"
+ INST_TTY=$TTY2
+ VALID_TTY_SELECTED=$TRUE
+ ;;
+ 3)
+ VALID_TEMP_TTY=$FALSE
+ while [ $VALID_TEMP_TTY -eq $FALSE ]
+ do
+ Echo "Enter full path name of a serial device \\c"
+ read TEMP_TTY
+ if [ -z "$TEMP_TTY" ]
+ then
+ Echo "Invalid Selection"
+ else
+ VALID_TEMP_TTY=$TRUE
+ INST_TTY=$TEMP_TTY
+ ALLOWED_PORT_NAMES="$TTY1,$TTY2,$INST_TTY"
+ fi
+ done
+ VALID_TTY_SELECTED=$TRUE
+ ;;
+ *)
+ beep
+ Echo "Invalid Selection..."
+ ;;
+ esac
+ done
+
+#######################################################################
+# Print cable type
+#######################################################################
+
+ Echo
+ echo_line
+ case "$SIGNAL_TYPE" in
+ $SMART)
+ case "$CABLE_TYPE" in
+ $NORMAL)
+ if [ "$APC_HARDWARE_PROD" = "Symmetra" ]
+ then
+ Echo "You should have the cable, #940-1524C attached to $INST_TTY"
+ else
+ Echo "You should have the black cable, #940-0024C attached to $INST_TTY"
+ fi
+ ;;
+ $PNP)
+ Echo "You should have the grey cable, #940-0095A attached to $INST_TTY"
+ ;;
+ esac
+ ;;
+ $SIMPLE)
+ Echo "You should have the grey cable, #940-0023A attached to $INST_TTY"
+ ;;
+ esac
+ Echo "Please verify."
+ echo_line
+
+######################################################################
+# Determine if user wants to run command files as root
+######################################################################
+
+ Echo
+ echo_line
+ Echo "Command files may be executed with root privileges or with the"
+ Echo "privileges you assign to the pwrchute account (allowing you to"
+ Echo "customize command file execution according to your system"
+ Echo "requirements)."
+ echo_line
+
+ Echo
+ IsYNLoop "Do you want to execute command files as root?"
+ case "$?" in
+ $YES)
+ RUN_COMMAND_FILES_AS_ROOT=$TRUE
+ ;;
+ $NO)
+ RUN_COMMAND_FILES_AS_ROOT=$FALSE
+ ;;
+ esac
+
+######################################################################
+# Determine if user wants to send email as root
+######################################################################
+
+ Echo
+ echo_line
+ Echo "E-mail may be sent with root privileges or with the privileges you"
+ Echo "assign to the pwrchute account."
+ echo_line
+
+ Echo
+ IsYNLoop "Do you want to send e-mail as root?"
+ case "$?" in
+ $YES)
+ SEND_EMAIL_AS_ROOT=$TRUE
+ ;;
+ $NO)
+ SEND_EMAIL_AS_ROOT=$FALSE
+ ;;
+ esac
+
+
+#######################################################################
+# Print install info for customer verification
+#######################################################################
+
+ Echo
+ echo_line
+ Echo "PRODUCT : $FULL_PROD_NAME"
+ Echo "DEDICATED TTY : $INST_TTY"
+ case "$INST_HARDWARE" in
+ 1) UPS_TYPE="Matrix-UPS"
+ ;;
+ 2) UPS_TYPE="Smart-UPS"
+ ;;
+ 3) UPS_TYPE="Back-UPS"
+ ;;
+ 4) UPS_TYPE="Back-UPS Pro"
+ ;;
+ 5) UPS_TYPE="Symmetra Power Array"
+ ;;
+ 6) UPS_TYPE="Smart-UPS DP"
+ ;;
+ esac
+ Echo "UPS TYPE : $UPS_TYPE"
+ if [ $SIGNAL_TYPE = $SMART ] && [ $MEASURE_UPS -eq $TRUE ]
+ then
+ Echo "Measure-UPS INSTALLED : TRUE"
+ fi
+ if [ $SIGNAL_TYPE = $SMART ] && [ $MEASURE_UPS -eq $FALSE ]
+ then
+ Echo "Measure-UPS INSTALLED : FALSE"
+ fi
+
+ if [ $ROOT_USER -eq $TRUE ]
+ then
+ Echo "INSTALLING AS ROOT : TRUE"
+ else
+ Echo "INSTALLING AS ROOT : FALSE"
+ fi
+
+ if [ $USE_TCP -eq $TRUE ]
+ then
+ Echo "TCP/IP Installed : TRUE"
+ else
+ Echo "TCP/IP Installed : FALSE"
+ fi
+
+ if [ $RUN_COMMAND_FILES_AS_ROOT -eq $TRUE ]
+ then
+ Echo "RUN COMMAND FILES AS ROOT : TRUE"
+ else
+ Echo "RUN COMMAND FILES AS ROOT : FALSE"
+ fi
+
+ if [ $SEND_EMAIL_AS_ROOT -eq $TRUE ]
+ then
+ Echo "SEND EMAIL AS ROOT : TRUE"
+ else
+ Echo "SEND EMAIL AS ROOT : FALSE"
+ fi
+
+ echo_line
+ Echo
+
+#######################################################################
+# Allow customer to verify or quit
+#######################################################################
+
+IsYNLoop "Are the above selections correct?"
+case "$?" in
+ $NO)
+ Echo
+ Echo "Please rerun the $INST_SCRIPT_NAME script"
+ Echo "No actions taken."
+ Echo
+ exit
+ ;;
+esac
+
+#############################################################################
+# Check for binary compatibility
+#############################################################################
+ Echo
+ Echo "Checking for binary compatibility..."
+ rm -f machine_def
+ ./machine_id 2>&1
+ if [ ! -r machine_def ]
+ then
+ echo_line
+ Echo "INSTALL FAILURE: There does not appear to be binary compatibilty between"
+ Echo "installed product and this machine"
+ echo_line
+ Echo
+ exit
+ else
+ Echo "binary compatibility VERIFIED"
+ Echo
+ fi
+
+
+#############################################################################
+# Verify that chosen serial device is a valid tty
+#############################################################################
+ VALID_TTY=$FALSE
+ ./ttycheck "$INST_TTY"
+ case "$?" in
+ 1)
+ VALID_TTY=$TRUE
+ Echo "$INST_TTY verified as a valid tty"
+ Echo
+ ;;
+ 0)
+ echo_line
+ Echo "WARNING: $INST_TTY does not appear to be a valid tty"
+ echo_line
+ beep
+ sleep 3
+ ;;
+ *)
+ echo_line
+ Echo "WARNING: General tty verification failure."
+ echo_line
+ beep
+ sleep 3
+ ;;
+ esac
+
+#############################################################################
+# See what we can determine about the port.
+#############################################################################
+ if [ $SKIP_PORT_VERIFICATION -eq $FALSE ]
+ then
+ Echo "The following Port validations for $INST_TTY may take a few moments...."
+ sleep 2
+ if [ $VALID_TTY -eq $TRUE ]
+ then
+ ./portcheck "$INST_TTY"
+ case "$?" in
+ 1)
+ IS_MODEM_PORT=$TRUE
+ IS_LOCAL_PORT=$FALSE
+ Echo "$INST_TTY appears to be a modem control port"
+ sleep 1
+ ;;
+ 2)
+ IS_MODEM_PORT=$FALSE
+ IS_LOCAL_PORT=$TRUE
+ Echo "$INST_TTY appears to be a local control port"
+ sleep 1
+ ;;
+ *)
+ beep
+ echo_line
+ Echo "Could not determine port type!"
+ echo_line
+ sleep 1
+ ;;
+ esac
+ fi
+
+ if [ $IS_MODEM_PORT -eq $TRUE ] && [ $SIGNAL_TYPE = $SMART ]
+ then
+ echo_line
+ beep
+ Echo "WARNING: Port must be configured for local control in order to work with a"
+ Echo "\"Smart\" Signaling UPS"
+ echo_line
+ Echo
+ HitAnyKey
+ fi
+
+ if [ $IS_LOCAL_PORT -eq $TRUE ] && [ $SIGNAL_TYPE = $SIMPLE ]
+ then
+ echo_line
+ beep
+ Echo "WARNING: Port must be configured for modem control in order to work with a"
+ Echo "\"Simple\" Signaling UPS"
+ echo_line
+ Echo
+ HitAnyKey
+ fi
+ Echo
+ fi
+
+
+
+
+#############################################################################
+# Modify OS system files for shutdown
+#############################################################################
+ modify_files=`grep -q -s -c POWERCHUTE /etc/rc.d/init.d/halt`
+ if [ "$modify_files" -eq 0 ]
+ then
+ Echo "making backup copy of shutdown files..."
+ cp $SHUTDOWN_FILE $SHUTDOWN_FILE.tmp
+ cp $SHUTDOWN_FILE $SHUTDOWN_FILE_BACKUP
+
+ Echo "modifying shutdown files...."
+
+ if [ -r $SHUTDOWN_FILE.tmp ]
+ then
+ rm -f $SHUTDOWN_FILE
+ else
+ echo_line
+ beep
+ Echo "Unable to find temp file $SHUTDOWN_FILE.tmp. Quitting."
+ echo_line
+ Quit
+ fi
+ sed "/$SHUTDOWN_SEARCH_STRING/ a\\
+ $SHUTDOWN_COMMAND_STRING" $SHUTDOWN_FILE.tmp > $SHUTDOWN_FILE
+ if [ ! -r $SHUTDOWN_FILE ]
+ then
+ echo_line
+ beep
+ Echo "Error writing $SHUTDOWN_FILE! Original can be found in\n$INSTALL_PATH/$SYSFILES_BACKUP_REPOSITORY. Quitting."
+ echo_line
+ exit
+ else
+ rm -f $SHUTDOWN_FILE.tmp
+ fi
+ chmod 754 $SHUTDOWN_FILE
+ fi
+
+
+#############################################################################
+# Verify we can communicate with UPS
+#############################################################################
+ cd /usr/lib/powerchute
+ RETRY=$TRUE
+ RE=
+ if [ $VALID_TTY -eq $TRUE ] && [ $IS_MODEM_PORT -eq $FALSE ]
+ then
+ while [ $RETRY -eq $TRUE ]
+ do
+ ./upswrite $INST_TTY $CABLE_TYPE verify
+ if [ $? -eq 5 ]
+ then
+ COMM_VERIFIED=$TRUE
+ RETRY=$FALSE
+ Echo
+ Echo "UPS communications on $INST_TTY verified"
+ Echo "Done."
+ Echo
+ else
+ Echo
+ echo_line
+ Echo "WARNING: Could not communicate with device on $INST_TTY."
+ Echo "Check that the communications cable is attached properly to both the device"
+ Echo "and the serial port."
+ beep
+ echo_line
+ Echo "NOTE: Though the $FULL_PROD_NAME installation is complete, if you "
+ Echo "quit before verifying communications, the application may not work properly"
+ echo_line
+ VALID_RE=$FALSE
+ while [ $VALID_RE -eq $FALSE ]
+ do
+ Echo "Do you wish to Exit or Retry communications? [R/E] \\c"
+ read RE
+ case "$RE" in
+ [Rr]*)
+ RETRY=$TRUE
+ VALID_RE=$TRUE
+ ;;
+ [Ee]*)
+ COMM_VERIFIED=$FALSE
+ RETRY=$FALSE
+ VALID_RE=$TRUE
+ ;;
+ esac
+ done
+ fi
+ done
+
+ elif [ $IS_LOCAL_PORT -eq $TRUE ]
+ then
+ echo_line
+ Echo "WARNING: Due to tty verification failure, the install"
+ Echo "will be unable to test UPS communications."
+ echo_line
+ beep
+ sleep 3
+ fi
+
+#############################################################################
+# Modify the powerchute.ini file
+#############################################################################
+ cd /usr/lib/powerchute
+ rm -f /tmp/temp_ini.in
+ rm -f /tmp/temp_ini.out
+ cp powerchute.ini_templ /tmp/temp_ini.in
+ cp /etc/powerchute.ini /etc/powerchute_ini.bak
+
+ sed s!GSUB_TTY_HERE!$INST_TTY!g /tmp/temp_ini.in > /tmp/temp_ini.out
+ CopyOutToIn
+ sed s/GSUB_SIGTYPE_HERE/$SIGNAL_TYPE/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ CopyOutToIn
+ if [ $MEASURE_UPS -eq $TRUE ]
+ then
+ sed s/GSUB_MUPS_HERE/YES/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ else
+ sed s/GSUB_MUPS_HERE/NO/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ fi
+ CopyOutToIn
+ if [ $UI_MONO_COLOR_SCHEME -eq $TRUE ]
+ then
+ sed "s/GSUB_UI_WARNCOLOR_HERE/$MONO_WARN_COLOR_STRING/g" /tmp/temp_ini.in > /tmp/temp_ini.out
+ else
+ sed "/GSUB_UI_WARNCOLOR_HERE/d" /tmp/temp_ini.in > /tmp/temp_ini.out
+ fi
+ CopyOutToIn
+ if [ $UI_MONO_COLOR_SCHEME -eq $TRUE ]
+ then
+ sed "s/GSUB_UI_ERRCOLOR_HERE/$MONO_ERR_COLOR_STRING/g" /tmp/temp_ini.in > /tmp/temp_ini.out
+ else
+ sed "/GSUB_UI_ERRCOLOR_HERE/d" /tmp/temp_ini.in > /tmp/temp_ini.out
+ fi
+ CopyOutToIn
+ sed s!GSUB_ALLOWED_PORTS_HERE!$ALLOWED_PORT_NAMES!g /tmp/temp_ini.in > /tmp/temp_ini.out
+ CopyOutToIn
+ if [ $USE_TCP -eq $TRUE ]
+ then
+ sed s/GSUB_USETCP_HERE/YES/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ else
+ sed s/GSUB_USETCP_HERE/NO/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ fi
+ CopyOutToIn
+ sed s/GSUB_CHANGE1_HERE/"$SYMSTR1"/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ CopyOutToIn
+ sed s/GSUB_CHANGE2_HERE/"$SYMSTR2"/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ CopyOutToIn
+ sed s/GSUB_TIMEOUT_HERE/"$SYMSTR13"/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ CopyOutToIn
+ sed s/GSUB_ACTIONS_HERE/"$SYMSTR3"/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ CopyOutToIn
+ if [ $RUN_COMMAND_FILES_AS_ROOT -eq $TRUE ]
+ then
+ sed s/GSUB_COMMAND_FILES_AS_ROOT_HERE/YES/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ else
+ sed s/GSUB_COMMAND_FILES_AS_ROOT_HERE/NO/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ fi
+ CopyOutToIn
+ if [ $SEND_EMAIL_AS_ROOT -eq $TRUE ]
+ then
+ sed s/GSUB_SEND_EMAIL_AS_ROOT_HERE/YES/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ else
+ sed s/GSUB_SEND_EMAIL_AS_ROOT_HERE/NO/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ fi
+ CopyOutToIn
+ if [ -n "$MODEM_PORT_NAME" ]
+ then
+ sed s!GSUB_MODEM_PORT_NAME!$MODEM_PORT_NAME!g /tmp/temp_ini.in > /tmp/temp_ini.out
+ else
+ sed s/GSUB_MODEM_PORT_NAME/""/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ fi
+ CopyOutToIn
+ sed s!GSUB_CABLE_TYPE_HERE!$CABLE_TYPE!g /tmp/temp_ini.in > /tmp/temp_ini.out
+ CopyOutToIn
+ if [ -n "$MODEM_ALLOWED_PORT_NAMES" ]
+ then
+ sed s!GSUB_MODEM_ALLOWED_PORT_NAMES!$MODEM_ALLOWED_PORT_NAMES!g /tmp/temp_ini.in > /tmp/temp_ini.out
+ else
+ sed s/GSUB_MODEM_ALLOWED_PORT_NAMES/""/g /tmp/temp_ini.in > /tmp/temp_ini.out
+ fi
+
+ cp -f /tmp/temp_ini.out /etc/powerchute.ini
+ rm -f /tmp/temp_ini.in
+ rm -f /tmp/temp_ini.out
+
+
+############################################################################
+# Make EEPROM adjustments
+############################################################################
+ if [ $COMM_VERIFIED -eq $TRUE ] && [ $SIGNAL_TYPE = $SMART ]
+ then
+
+ CheckEepromUps "p" $INST_TTY
+ if [ "$?" -eq $TRUE ]
+ then
+ beep
+ echo_line
+ Echo "Due to the amount of time it can take Unix platforms to shutdown,"
+ Echo "it is sometimes necessary to increase the eeprom parameter UpsTurnOffDelay"
+ Echo "within the UPS. This is in order to allow sufficient time for the"
+ Echo "Operating System to shutdown completely."
+ echo_line
+ Echo "* Doing this is recommended for the Linux Operating System *"
+ echo_line
+
+ IsYNLoop "Do you wish to increment the UpsTurnOffDelay to its next highest\nvalue now?"
+ if [ "$?" -eq $YES ]
+ then
+ CheckDipSwitches $INST_TTY
+ if [ "$?" -eq $TRUE ]
+ then
+ Echo "Please wait.\\c"
+ desired_val="180"
+ GetNextEepromValueGreaterThan "p" "20" $INST_TTY
+ next_value="$?"
+ if [ "$next_value" -ne "-1" ]
+ then
+ desired_val=$next_value
+ fi
+
+ current_val="20"
+ GetCurrentEepromSetting "p" $INST_TTY
+ current_eeprom="$?"
+ if [ "$current_eeprom" -ne "-1" ]
+ then
+ current_val="$current_eeprom"
+ fi
+
+ CycleUntilAcceptableValue "p" "$current_val" "$desired_val" "$INST_TTY"
+ if [ "$?" -eq $TRUE ]
+ then
+ Echo
+ beep
+ Echo "UpsTurnOffDelay successfully set at $desired_val."
+ fi
+ fi
+ fi
+ else
+ Echo "Eeproms okay."
+ fi
+ fi
+
+############################################################################
+# Add pwrchute user account
+############################################################################
+ if [ $USE_TCP -eq $TRUE ]
+ then
+ pwrchute_exists=`grep -c pwrchute /etc/passwd`
+ if [ $pwrchute_exists -eq 0 ]
+ then
+ Echo
+ Echo "The PowerChute plus User Interface will prompt you for a password when you attempt"
+ Echo "to connect to the upsd daemon running on this machine. This password is the"
+ Echo "password of the pwrchute user account."
+ Echo
+ Echo "Adding a pwrchute user account"
+ /usr/sbin/useradd pwrchute
+ Echo "Please set the password for the pwrchute user account."
+ /usr/bin/passwd pwrchute
+ fi
+ fi
+
+############################################################################
+# Done!
+############################################################################
+
+ echo_line
+ Echo "$FULL_PROD_NAME Installation complete. You will need to reboot"
+ Echo "in order to start the application"
+ echo_line
+
+ if [ $COMM_VERIFIED -eq $FALSE ]
+ then
+ echo_line
+ Echo "WARNING: Serial communications never verified, the installed product may"
+ Echo "not work properly. You may want to try the following:"
+ Echo
+ Echo " 1) Check that specified serial device exists."
+ Echo " 2) Check the device configuration is appropriate for your UPS type"
+ Echo " 3) Rebuild or create the serial device using the utility appropriate "
+ Echo " for your system."
+ Echo
+ echo_line
+ fi
--- /dev/null
+diff -ur PowerChutePlus-4.5.2.orig/addpage.sh PowerChutePlus-4.5.2/addpage.sh
+--- PowerChutePlus-4.5.2.orig/addpage.sh Tue Oct 5 06:02:20 1999
++++ PowerChutePlus-4.5.2/addpage.sh Sun Jul 2 01:33:38 2000
+@@ -27,7 +27,7 @@
+ cmd=$2
+ delay=$3
+
+-. ./what_os.sh
++. /usr/lib/powerchute/what_os.sh
+
+ case "$OS" in
+ $UWARE7)
+@@ -46,7 +46,7 @@
+ ;;
+ esac
+
+-. ./what_os.sh
++. /usr/lib/powerchute/what_os.sh
+
+ if [ "$OS" = "$LINUX" ]
+ then
+@@ -54,7 +54,3 @@
+ else
+ echo "~!sleep $delay" >> $script
+ fi
+-
+-
+-
+-
+diff -ur PowerChutePlus-4.5.2.orig/dialpager.sh PowerChutePlus-4.5.2/dialpager.sh
+--- PowerChutePlus-4.5.2.orig/dialpager.sh Tue Oct 5 06:02:20 1999
++++ PowerChutePlus-4.5.2/dialpager.sh Sun Jul 2 01:33:38 2000
+@@ -16,11 +16,11 @@
+ #----------------------------------------------------------------------
+
+
+-PATH=/bin:/usr/bin:/sbin:/usr/sbin:/etc:/usr/ccs/bin
++PATH=/bin:/usr/bin:/sbin:/usr/sbin
+ export PATH
+
+ PWRCHUTE=GSUB_PWRCHUTE_ENV_HERE
+-TMPDIR=$PWRCHUTE/.tmp
++TMPDIR=/tmp
+ export TMPDIR
+ export PWRCHUTE
+
+@@ -69,11 +69,11 @@
+ }
+
+
+-modemlock=$TMPDIR/modemlock
++modemlock=$TMPDIR/upsd.modemlock
+ tmpcommand=$TMPDIR/$$.command
+ tmpfile=$TMPDIR/$$.page
+
+-. ./what_os.sh
++. /usr/lib/powerchute/what_os.sh
+
+ # if modemlock exists, then exit
+ if [ -r $modemlock ]
+@@ -133,11 +133,3 @@
+ then
+ rm -f $modemlock
+ fi
+-
+-
+-
+-
+-
+-
+-
+-
+diff -ur PowerChutePlus-4.5.2.orig/killbk.sh PowerChutePlus-4.5.2/killbk.sh
+--- PowerChutePlus-4.5.2.orig/killbk.sh Tue Oct 5 06:02:20 1999
++++ PowerChutePlus-4.5.2/killbk.sh Sun Jul 2 01:50:07 2000
+@@ -15,17 +15,13 @@
+ # more than that of awk
+ # -----------------------------------------------------------------------
+
+- . ./what_os.sh
+- if [ "$OS" = "LINUX" ]
+- then
+- ps ax | awk '/pwrchu/ {print $1}' > tmp.pid
+- else
+- ps -e | awk '/pwrchu/ {print $1}' > tmp.pid
+- fi
++ TMPFILE="`mktemp /tmp/pcpc.pid.XXXXXX`"
++ . /usr/lib/powerchute/what_os.sh
++ ps ax | awk '/pwrchu/ && !/awk/ {print $1}' > $TMPFILE
+
+- if [ -s tmp.pid ] #Exists and file size greater than 0
++ if [ -s $TMPFILE ] #Exists and file size greater than 0
+ then
+- set `cat tmp.pid`
++ set `cat $TMPFILE`
+ while [ ! -z "$1" ]
+ do
+ echo "killing powerchute client with pid = $1"
+@@ -35,18 +31,17 @@
+ done
+ fi
+
+- rm -f tmp.pid
++ rm -f $TMPFILE
+ }
+
+
+ KillPCPClients
+
+
+-if [ -s bkupsd.pid ]
++if [ -s /var/run/bkupsd.pid ]
+ then
+- set `cat bkupsd.pid`
++ set `cat /var/run/bkupsd.pid`
+ kill -INT $1
+- rm -f bkupsd.pid
++ rm -f /var/run/bkupsd.pid
+ fi
+-
+
+diff -ur PowerChutePlus-4.5.2.orig/killpc.sh PowerChutePlus-4.5.2/killpc.sh
+--- PowerChutePlus-4.5.2.orig/killpc.sh Tue Oct 5 06:02:20 1999
++++ PowerChutePlus-4.5.2/killpc.sh Sun Jul 2 01:33:38 2000
+@@ -9,12 +9,12 @@
+ # Usage: ./killpc.sh
+ #
+
+-if [ -s upsd.pid ]
++if [ -s /var/run/upsd.pid ]
+ then
+- set `cat upsd.pid`
++ set `cat /var/run/upsd.pid`
+ echo "Killing upsd instance running with pid $1"
+ kill $1
+- rm -f upsd.pid
++ rm -f /var/run/upsd.pid
+ echo "Done."
+ else
+ echo "No instance of upsd detected to be running!"
+diff -ur PowerChutePlus-4.5.2.orig/mailer.sh PowerChutePlus-4.5.2/mailer.sh
+--- PowerChutePlus-4.5.2.orig/mailer.sh Tue Oct 5 06:02:20 1999
++++ PowerChutePlus-4.5.2/mailer.sh Sun Jul 2 01:33:38 2000
+@@ -24,11 +24,11 @@
+ # a script parameter and also added PWRCHUTE env variable
+ #
+
+-PATH=/bin:/usr/bin:/sbin:/usr/sbin:/etc:/usr/ccs/bin
++PATH=/bin:/usr/bin:/sbin:/usr/sbin
+ export PATH
+
+ PWRCHUTE=GSUB_PWRCHUTE_ENV_HERE
+-TMPDIR=$PWRCHUTE/.tmp
++TMPDIR=/tmp
+ export TMPDIR
+ export PWRCHUTE
+
+@@ -58,7 +58,4 @@
+ then
+ rm -f $MSG
+ fi
+-
+-
+-
+
+diff -ur PowerChutePlus-4.5.2.orig/notifier.sh PowerChutePlus-4.5.2/notifier.sh
+--- PowerChutePlus-4.5.2.orig/notifier.sh Tue Oct 5 06:02:20 1999
++++ PowerChutePlus-4.5.2/notifier.sh Sun Jul 2 01:33:38 2000
+@@ -21,23 +21,12 @@
+ #
+
+
+-PATH=/bin:/usr/bin:/sbin:/usr/sbin:/etc:/usr/ccs/bin
++PATH=/bin:/usr/bin:/sbin:/usr/sbin
+ export PATH
+
+ USR_LIST=$1
+ MSG=$2
+
+-Echo() {
+- string="$1"
+- if [ -r /usr/5bin/echo ]
+- then
+- /usr/5bin/echo "$string"
+- else
+- echo "$string"
+- fi
+-}
+-
+-
+ if [ -s $USR_LIST ]
+ then
+
+@@ -51,8 +40,3 @@
+
+ rm -f $USR_LIST
+ rm -f $MSG
+-
+-
+-
+-
+-
+diff -ur PowerChutePlus-4.5.2.orig/pcshut.sh PowerChutePlus-4.5.2/pcshut.sh
+--- PowerChutePlus-4.5.2.orig/pcshut.sh Tue Oct 5 06:02:20 1999
++++ PowerChutePlus-4.5.2/pcshut.sh Sun Jul 2 01:49:42 2000
+@@ -41,17 +41,13 @@
+ # more than that of awk
+ # -----------------------------------------------------------------------
+
+- . ./what_os.sh
+- if [ "$OS" = "LINUX" ]
+- then
+- ps ax | awk '/pwrchu/ {print $1}' > tmp.pid
+- else
+- ps -e | awk '/pwrchu/ {print $1}' > tmp.pid
+- fi
++ TMPFILE="`mktemp /tmp/pcpc.pid.XXXXXX`"
++ . /usr/lib/powerchute/what_os.sh
++ ps ax | awk '/pwrchu/ && !/awk/ {print $1}' > $TMPFILE
+
+- if [ -s tmp.pid ] #Exists and file size greater than 0
++ if [ -s $TMPFILE ] #Exists and file size greater than 0
+ then
+- set `cat tmp.pid`
++ set `cat $TMPFILE`
+ while [ ! -z "$1" ]
+ do
+ echo "killing powerchute client with pid = $1"
+@@ -61,13 +57,13 @@
+ done
+ fi
+
+- rm -f tmp.pid
++ rm -f $TMPFILE
+ }
+
+
+ KillPCPClients
+
+-. ./what_os.sh
++. /usr/lib/powerchute/what_os.sh
+
+ if [ $SHUTDOWN_TYPE = "QUICK" ]
+ then
+@@ -123,10 +119,4 @@
+ ;;
+ esac
+ fi
+-
+-
+-
+-
+-
+-
+
+diff -ur PowerChutePlus-4.5.2.orig/wall.sh PowerChutePlus-4.5.2/wall.sh
+--- PowerChutePlus-4.5.2.orig/wall.sh Tue Oct 5 06:02:20 1999
++++ PowerChutePlus-4.5.2/wall.sh Sun Jul 2 01:33:38 2000
+@@ -25,7 +25,7 @@
+ # djs18Oct95: UnixWare cannot write to /dev/pts000
+ #
+
+-PATH=/bin:/usr/bin:/sbin:/usr/sbin:/etc:/usr/ccs/bin
++PATH=/bin:/usr/bin:/sbin:/usr/sbin
+ export PATH
+
+ MSG=$1
+@@ -50,7 +50,7 @@
+ if [ -r $MSG ]
+ then
+
+- . ./what_os.sh
++ . /usr/lib/powerchute/what_os.sh
+
+ case "$OS" in
+ $UWARE1)
+@@ -65,17 +65,4 @@
+
+ rm -f $MSG
+ fi
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+
+diff -ur PowerChutePlus-4.5.2.orig/what_os.sh PowerChutePlus-4.5.2/what_os.sh
+--- PowerChutePlus-4.5.2.orig/what_os.sh Tue Oct 5 06:02:20 1999
++++ PowerChutePlus-4.5.2/what_os.sh Sun Jul 2 01:33:38 2000
+@@ -57,65 +57,65 @@
+ OS="OS_UNKNOWN"
+
+
+-PATH=/bin:/usr/bin:/sbin:/usr/sbin:/etc:/usr/ccs/bin
++PATH=/bin:/usr/bin:/sbin:/usr/sbin
+ export PATH
+
+-if [ ! -r machine_def ]
++if [ ! -r /usr/lib/powerchute/machine_def ]
+ then
+ echo "Improper installation, or corrupted product tree: No machine_def file"
+ exit
+ fi
+
+-if [ -r SOLARIS2X ]
++if [ -r /usr/lib/powerchute/SOLARIS2X ]
+ then
+ OS=$SOLARIS2X
+-elif [ -r SOLARIS2X86 ]
++elif [ -r /usr/lib/powerchute/SOLARIS2X86 ]
+ then
+ OS=$SOLARIS2X86
+-elif [ -r AIX3 ]
++elif [ -r /usr/lib/powerchute/AIX3 ]
+ then
+ OS=$AIX3
+-#elif [ -r AIX324- ] || [ -r AIX324+ ]
+-elif [ -r AIX4 ]
++#elif [ -r /usr/lib/powerchute/AIX324- ] || [ -r /usr/lib/powerchute/AIX324+ ]
++elif [ -r /usr/lib/powerchute/AIX4 ]
+ then
+ OS=$AIX4
+-elif [ -r HPUX9 ]
++elif [ -r /usr/lib/powerchute/HPUX9 ]
+ then
+ OS=$HPUX9
+-elif [ -r HPUX10 ]
++elif [ -r /usr/lib/powerchute/HPUX10 ]
+ then
+ OS=$HPUX10
+-elif [ -r SUNOS4 ]
++elif [ -r /usr/lib/powerchute/SUNOS4 ]
+ then
+ OS=$SUNOS4
+-elif [ -r UWARE1 ]
++elif [ -r /usr/lib/powerchute/UWARE1 ]
+ then
+ OS=$UWARE1
+-elif [ -r UWARE2 ]
++elif [ -r /usr/lib/powerchute/UWARE2 ]
+ then
+ OS=$UWARE2
+-elif [ -r NCR ]
++elif [ -r /usr/lib/powerchute/NCR ]
+ then
+ OS=$NCR
+-elif [ -r SCO ]
++elif [ -r /usr/lib/powerchute/SCO ]
+ then
+ OS=$SCO
+-elif [ -r SGI ]
++elif [ -r /usr/lib/powerchute/SGI ]
+ then
+ OS=$SGI
+-elif [ -r OLIVETTI ]
++elif [ -r /usr/lib/powerchute/OLIVETTI ]
+ then
+ OS=$OLIV
+-elif [ -r UNISYS ]
++elif [ -r /usr/lib/powerchute/UNISYS ]
+ then
+ OS=$USYS
+-elif [ -r ALPHAOSF ]
++elif [ -r /usr/lib/powerchute/ALPHAOSF ]
+ then
+ OS=$ALPHAOSF
+-elif [ -r UWARE7 ]
++elif [ -r /usr/lib/powerchute/UWARE7 ]
+ then
+ OS=$UWARE7
+-elif [ -r LINUX ]
++elif [ -r /usr/lib/powerchute/LINUX ]
+ then
+ OS=$LINUX
+ else
+@@ -129,12 +129,7 @@
+ case $1 in
+ SHOWME | showme)
+ echo $OS
+- cat machine_def
++ cat /usr/lib/powerchute/machine_def
+ ;;
+ esac
+-
+-
+-
+-
+-
+
--- /dev/null
+[ Ups ]
+ SignallingType = smart
+ PortName = /dev/ttyS0
+ AutoUpsRebootEnabled = Yes
+ AllowedPortNames = /dev/ttyS0,/dev/ttyS1
+ CableType = Normal
+
+
+[ EventLogging ]
+ EventLogEnabled = Yes
+ EventLogName = /var/log/powerchute.log
+ EventLogMaxSize = 50000
+
+
+[ DataLogging ]
+ DataLogEnabled = Yes
+ DataLogName = /var/log/powerchute.dat
+ DataLogMaxSize = 50000
+ DataLogInterval = 600
+
+[ ErrorLogging ]
+ ErrorLogEnabled = Yes
+ ErrorLogName = /var/log/powerchute.err
+ ErrorLogMaxSize = 50000
+
+
+[ Messaging ]
+ MessageDelay = 5
+ MessageInterval = 30
+
+
+[ SelfTests ]
+ EnableSelfTests = Yes
+ SelfTestDay = MONDAY
+ SelfTestSchedule = At turn on
+ SelfTestTime = 12:00 PM
+
+
+[ Shutdown ]
+ ShutdownDelay = 30
+ AdminShutdownDelay = 900
+ DailyShutdownEnabled = No
+ DailyShutdownTime = 6:00 PM
+ DailyWakeupTime = 7:00 AM
+ WeeklyShutdownEnabled = No
+ WeeklyShutdownDay = Friday
+ WeeklyShutdownTime = 6:00 PM
+ WeeklyWakeUpDay = Monday
+ WeeklyWakeUpTime = 7:00 AM
+
+[ Server ]
+ HostName =
+
+[ UserInterface ]
+ TemperatureUnits = Celsius
+ SoundEffects = No
+
+[ BatteryCalibration ]
+ Enabled = No
+ BatteryCalibrationDay = Monday
+ BatteryCalibrationTime = 07:00 AM
+
+[ Devices ]
+ MeasureUps = NO
+
+[ EventText ]
+ 100000 = *** PowerChute PLUS Version 4.5.2 (glibc) Started ***
+ 100100 = *** PowerChute PLUS Stopped ***
+ 100200 = Communication established
+ 100300 = Normal power restored: UPS on line
+ 100400 = UPS self-test passed
+ 100401 = Scheduled UPS self-test passed
+ 100402 = User initiated UPS self-test passed
+ 100403 = Self-test at UPS passed
+ 100500 = Administrative shutdown started
+ 100501 = Administrative shutdown: User initiated
+ 100502 = Administrative shutdown: Weekly shutdown
+ 100503 = Administrative shutdown: Daily shutdown
+ 100600 = Shutdown cancelled
+ 100601 = User initiated shutdown cancelled
+ 100602 = Weekly administrative shutdown cancelled
+ 100603 = Daily administrative shutdown cancelled
+ 100700 = UPS returned from low battery condition
+ 100701 = UPS returned from low battery condition: #BATTERY_CAPACITY#%
+ 100900 = UPS batteries no longer need replacing
+ 101000 = Contact #CONTACT_NUMBER# normal (#NORMAL_POSITION#): #USER_COMMENT#
+ 101300 = UPS overload condition solved
+ 101400 = UPS run time calibration initiated
+ 101500 = UPS run time calibration completed
+ 101600 = Shutdown started
+ 101601 = User initiated shutdown started
+ 101602 = Weekly administrative shutdown started
+ 101603 = Daily administrative shutdown started
+ 101700 = UPS returned from bypass
+ 101800 = Smart Cell Signal Restored
+ 110000 = Ambient temperature back within thresholds
+ 110100 = Ambient humidity back within thresholds
+
+
+ 200000 = UPS on battery
+ 200001 = UPS on battery: High input line voltage #MAX_VOLTAGE# V
+ 200002 = UPS on battery: Brownout #MIN_VOLTAGE# V
+ 200003 = UPS on battery: Blackout #MIN_VOLTAGE# V
+ 200004 = UPS on battery: Small momentary sag #MIN_VOLTAGE# V
+ 200006 = UPS on battery: Deep momentary sag #MIN_VOLTAGE# V
+ 200005 = UPS on battery: Small momentary spike #MAX_VOLTAGE# V
+ 200007 = UPS on battery: Large momentary spike #MAX_VOLTAGE# V
+ 200008 = UPS on battery: Simulated power failure
+ 200100 = System shutdown
+ 200200 = UPS enabling SmartBoost
+ 200300 = Low battery condition
+ 200301 = Low battery condition: #BATTERY_CAPACITY#%
+ 200400 = UPS run time calibration cancelled
+ 200401 = UPS run time calibration cancelled by user
+ 200402 = UPS run time calibration cancelled by power failure
+ 200403 = UPS unable to perform run time calibration: Capacity < 100%
+ 201301 = UPS on bypass: user set via software or panel
+ 201302 = GSUB_CHANGE13_HERE
+
+
+ 300000 = Unable to communicate with UPS
+ 300100 = UPS output overload
+ 300200 = UPS self-test failed
+ 300201 = Scheduled UPS self-test failed: Bad battery
+ 300202 = Scheduled UPS self-test failed: Invalid test
+ 300203 = User initiated self-test failed: Bad battery
+ 300204 = User initiated self-test failed: Invalid test
+ 300205 = Self-test at UPS failed: Bad battery
+ 300206 = Self-test at UPS failed: Invalid test
+ 300300 = UPS battery is discharged
+ 300301 = UPS battery is discharged: #BATTERY_CAPACITY#%
+ 300400 = Communication lost while on battery
+ 300600 = Contact #CONTACT_NUMBER# fault (#CONTACT_POSITION#): #USER_COMMENT#
+ 301000 = Check installation of Smart Cell signal cable
+ 301300 = UPS on bypass internal temp over limit
+ 301301 = UPS on bypass battery charger failure
+ 301302 = UPS on bypass: severe DC imbalance overload
+ 301303 = UPS on bypass: output voltage outside limits
+ 301304 = UPS on bypass: top module fan needs repair
+ 301400 = Base module fan needs repair
+ 301500 = Base module bypass power supply needs repair
+ 301600 = UPS battery needs replacing
+
+ 310001 = Below lower ambient temperature threshold of #LOW_THRESHOLD#
+ 310002 = Exceeded upper ambient temperature threshold of #HIGH_THRESHOLD#
+ 310101 = Below humidity threshold of #LOW_THRESHOLD#
+ 310102 = Exceeded upper humidity threshold of #HIGH_THRESHOLD#
+
+
+[ PopupText ]
+ 1003 = Normal utility power at #HOSTNAME# has been restored.
+ 1006 = Shutdown of #HOSTNAME# has been cancelled.
+ 1007 = UPS batteries at #HOSTNAME# are no longer discharged.
+ 1016 = Shutdown process started.
+
+ 2000 = #HOSTNAME# is running on battery power.
+ 2001 = #HOSTNAME# has been shutdown.
+ 2003 = Low battery power at #HOSTNAME#.
+
+ 3000 = #HOSTNAME# has lost communications with the UPS.
+ 3003 = UPS batteries at #HOSTNAME# are discharged.
+
+
+
+[ FlexEventNames ]
+ 1000 = PowerChute Started
+ 1001 = PowerChute Stopped
+ 1002 = Communication Established
+ 1003 = Power Restored
+ 1004 = UPS Self-Test Passed
+ 1005 = Administrative Shutdown
+ 1006 = Shutdown Cancelled
+ 1007 = UPS Return From Low Battery
+ 1009 = Battery No Longer Needs Replacing
+ 1010 = Contact Normal
+ 1013 = UPS Overload Condition Solved
+ 1014 = UPS Run Time Calibration Initiated
+ 1015 = UPS Run Time Calibration Completed
+ 1016 = System Shutdown Starting
+ 1017 = Return From Bypass
+ 1018 = Smart Cell Signal Returned
+
+ 1100 = Ambient Temp In Range
+ 1101 = Humidity In Range
+
+ 2000 = UPS On Battery
+ 2001 = System Shutdown Complete
+ 2002 = UPS Enabling SmartBoost
+ 2003 = Low Battery Condition
+ 2004 = Cancel Battery Calibration
+ 2013 = UPS On Bypass: Maintenance
+
+
+ 3000 = Unable To Communicate With UPS
+ 3001 = UPS Output Overload
+ 3002 = UPS Self-Test Failed
+ 3003 = UPS Battery Is Discharged
+ 3004 = Comm Lost While On Battery
+ 3006 = Abnormal Contact Position
+ 3010 = Check Smart Cell Signal
+ 3013 = UPS On Bypass: Failure
+ 3014 = Base Module Fan Failure
+ 3015 = Base Module Power Supply Failure
+ 3016 = UPS Battery Needs Replacing
+
+ 3100 = Ambient Temp Out Of Range
+ 3101 = Humidity Out Of Range
+
+
+[ Email ]
+ Password = APC
+
+[ LineFail ]
+ NotifyDelay = 5
+ NotifyInterval = 30
+ NotifyRepeat = Yes
+ ShutdownDelay = 300
+ Actions = LUS
+
+[ AdminShutdown ]
+ ShutdownDelay = 900
+ NotifyRepeat = Yes
+
+[ Network ]
+ UseTCP = YES
+
+[ Security ]
+ RunCommandFilesAsRoot = NO
+ SendEmailAsRoot = NO
+
+[ Help ]
+ WebBrowser = /usr/X11R6/bin/netscape
+
+[ Modem ]
+ PortName = /dev/modem
+ ModemAllowedPortNames = /dev/modem,/dev/ttyS0,/dev/ttyS1
--- /dev/null
+[ Ups ]
+ SignallingType = GSUB_SIGTYPE_HERE
+ PortName = GSUB_TTY_HERE
+ AutoUpsRebootEnabled = Yes
+ AllowedPortNames = GSUB_ALLOWED_PORTS_HERE
+ CableType = GSUB_CABLE_TYPE_HERE
+ GSUB_TIMEOUT_HERE
+
+[ EventLogging ]
+ EventLogEnabled = Yes
+ EventLogName = /var/log/powerchute.log
+ EventLogMaxSize = 50000
+
+
+[ DataLogging ]
+ DataLogEnabled = Yes
+ DataLogName = /var/log/powerchute.dat
+ DataLogMaxSize = 50000
+ DataLogInterval = 600
+
+[ ErrorLogging ]
+ ErrorLogEnabled = Yes
+ ErrorLogName = /var/log/powerchute.err
+ ErrorLogMaxSize = 50000
+
+
+[ Messaging ]
+ MessageDelay = 5
+ MessageInterval = 30
+
+
+[ SelfTests ]
+ EnableSelfTests = Yes
+ SelfTestDay = MONDAY
+ SelfTestSchedule = At turn on
+ SelfTestTime = 12:00 PM
+
+
+[ Shutdown ]
+ ShutdownDelay = 30
+ AdminShutdownDelay = 900
+ DailyShutdownEnabled = No
+ DailyShutdownTime = 6:00 PM
+ DailyWakeupTime = 7:00 AM
+ WeeklyShutdownEnabled = No
+ WeeklyShutdownDay = Friday
+ WeeklyShutdownTime = 6:00 PM
+ WeeklyWakeUpDay = Monday
+ WeeklyWakeUpTime = 7:00 AM
+
+[ Server ]
+ HostName =
+
+[ UserInterface ]
+ TemperatureUnits = Celsius
+ SoundEffects = No
+ GSUB_UI_WARNCOLOR_HERE
+ GSUB_UI_ERRCOLOR_HERE
+
+[ BatteryCalibration ]
+ Enabled = No
+ BatteryCalibrationDay = Monday
+ BatteryCalibrationTime = 07:00 AM
+
+[ Devices ]
+ MeasureUps = GSUB_MUPS_HERE
+
+[ EventText ]
+ 100000 = *** PowerChute PLUS Version 4.5.2 (glibc) Started ***
+ 100100 = *** PowerChute PLUS Stopped ***
+ 100200 = Communication established
+ 100300 = Normal power restored: UPS on line
+ 100400 = UPS self-test passed
+ 100401 = Scheduled UPS self-test passed
+ 100402 = User initiated UPS self-test passed
+ 100403 = Self-test at UPS passed
+ 100500 = Administrative shutdown started
+ 100501 = Administrative shutdown: User initiated
+ 100502 = Administrative shutdown: Weekly shutdown
+ 100503 = Administrative shutdown: Daily shutdown
+ 100600 = Shutdown cancelled
+ 100601 = User initiated shutdown cancelled
+ 100602 = Weekly administrative shutdown cancelled
+ 100603 = Daily administrative shutdown cancelled
+ 100700 = UPS returned from low battery condition
+ 100701 = UPS returned from low battery condition: #BATTERY_CAPACITY#%
+ 100900 = UPS batteries no longer need replacing
+ 101000 = Contact #CONTACT_NUMBER# normal (#NORMAL_POSITION#): #USER_COMMENT#
+ 101300 = UPS overload condition solved
+ 101400 = UPS run time calibration initiated
+ 101500 = UPS run time calibration completed
+ 101600 = Shutdown started
+ 101601 = User initiated shutdown started
+ 101602 = Weekly administrative shutdown started
+ 101603 = Daily administrative shutdown started
+ 101700 = UPS returned from bypass
+ 101800 = Smart Cell Signal Restored
+ 110000 = Ambient temperature back within thresholds
+ 110100 = Ambient humidity back within thresholds
+
+
+ 200000 = UPS on battery
+ 200001 = UPS on battery: High input line voltage #MAX_VOLTAGE# V
+ 200002 = UPS on battery: Brownout #MIN_VOLTAGE# V
+ 200003 = UPS on battery: Blackout #MIN_VOLTAGE# V
+ 200004 = UPS on battery: Small momentary sag #MIN_VOLTAGE# V
+ 200006 = UPS on battery: Deep momentary sag #MIN_VOLTAGE# V
+ 200005 = UPS on battery: Small momentary spike #MAX_VOLTAGE# V
+ 200007 = UPS on battery: Large momentary spike #MAX_VOLTAGE# V
+ 200008 = UPS on battery: Simulated power failure
+ 200100 = System shutdown
+ 200200 = UPS enabling SmartBoost
+ 200300 = Low battery condition
+ 200301 = Low battery condition: #BATTERY_CAPACITY#%
+ 200400 = UPS run time calibration cancelled
+ 200401 = UPS run time calibration cancelled by user
+ 200402 = UPS run time calibration cancelled by power failure
+ 200403 = UPS unable to perform run time calibration: Capacity < 100%
+ 201301 = UPS on bypass: user set via software or panel
+ 201302 = GSUB_CHANGE13_HERE
+
+
+ 300000 = Unable to communicate with UPS
+ 300100 = UPS output overload
+ 300200 = UPS self-test failed
+ 300201 = Scheduled UPS self-test failed: GSUB_CHANGE1_HERE
+ 300202 = Scheduled UPS self-test failed: Invalid test
+ 300203 = User initiated self-test failed: GSUB_CHANGE1_HERE
+ 300204 = User initiated self-test failed: Invalid test
+ 300205 = Self-test at UPS failed: GSUB_CHANGE1_HERE
+ 300206 = Self-test at UPS failed: Invalid test
+ 300300 = UPS battery is discharged
+ 300301 = UPS battery is discharged: #BATTERY_CAPACITY#%
+ 300400 = Communication lost while on battery
+ 300600 = Contact #CONTACT_NUMBER# fault (#CONTACT_POSITION#): #USER_COMMENT#
+ 301000 = Check installation of Smart Cell signal cable
+ 301300 = GSUB_CHANGE2_HERE internal temp over limit
+ 301301 = GSUB_CHANGE2_HERE battery charger failure
+ 301302 = UPS on bypass: severe DC imbalance overload
+ 301303 = UPS on bypass: output voltage outside limits
+ 301304 = UPS on bypass: top module fan needs repair
+ 301400 = Base module fan needs repair
+ 301500 = Base module bypass power supply needs repair
+ 301600 = UPS battery needs replacing
+
+ 310001 = Below lower ambient temperature threshold of #LOW_THRESHOLD#
+ 310002 = Exceeded upper ambient temperature threshold of #HIGH_THRESHOLD#
+ 310101 = Below humidity threshold of #LOW_THRESHOLD#
+ 310102 = Exceeded upper humidity threshold of #HIGH_THRESHOLD#
+
+
+[ PopupText ]
+ 1003 = Normal utility power at #HOSTNAME# has been restored.
+ 1006 = Shutdown of #HOSTNAME# has been cancelled.
+ 1007 = UPS batteries at #HOSTNAME# are no longer discharged.
+ 1016 = Shutdown process started.
+
+ 2000 = #HOSTNAME# is running on battery power.
+ 2001 = #HOSTNAME# has been shutdown.
+ 2003 = Low battery power at #HOSTNAME#.
+
+ 3000 = #HOSTNAME# has lost communications with the UPS.
+ 3003 = UPS batteries at #HOSTNAME# are discharged.
+
+
+
+[ FlexEventNames ]
+ 1000 = PowerChute Started
+ 1001 = PowerChute Stopped
+ 1002 = Communication Established
+ 1003 = Power Restored
+ 1004 = UPS Self-Test Passed
+ 1005 = Administrative Shutdown
+ 1006 = Shutdown Cancelled
+ 1007 = UPS Return From Low Battery
+ 1009 = Battery No Longer Needs Replacing
+ 1010 = Contact Normal
+ 1013 = UPS Overload Condition Solved
+ 1014 = UPS Run Time Calibration Initiated
+ 1015 = UPS Run Time Calibration Completed
+ 1016 = System Shutdown Starting
+ 1017 = Return From Bypass
+ 1018 = Smart Cell Signal Returned
+
+ 1100 = Ambient Temp In Range
+ 1101 = Humidity In Range
+
+ 2000 = UPS On Battery
+ 2001 = System Shutdown Complete
+ 2002 = UPS Enabling SmartBoost
+ 2003 = Low Battery Condition
+ 2004 = Cancel Battery Calibration
+ 2013 = UPS On Bypass: Maintenance
+
+
+ 3000 = Unable To Communicate With UPS
+ 3001 = UPS Output Overload
+ 3002 = UPS Self-Test Failed
+ 3003 = UPS Battery Is Discharged
+ 3004 = Comm Lost While On Battery
+ 3006 = Abnormal Contact Position
+ 3010 = Check Smart Cell Signal
+ 3013 = UPS On Bypass: Failure
+ 3014 = Base Module Fan Failure
+ 3015 = Base Module Power Supply Failure
+ 3016 = UPS Battery Needs Replacing
+
+ 3100 = Ambient Temp Out Of Range
+ 3101 = Humidity Out Of Range
+
+
+[ Email ]
+ Password = APC
+
+[ LineFail ]
+ NotifyDelay = 5
+ NotifyInterval = 30
+ NotifyRepeat = Yes
+ ShutdownDelay = 300
+ GSUB_ACTIONS_HERE
+
+[ AdminShutdown ]
+ ShutdownDelay = 900
+ NotifyRepeat = Yes
+
+[ Network ]
+ UseTCP = GSUB_USETCP_HERE
+
+[ Security ]
+ RunCommandFilesAsRoot = GSUB_COMMAND_FILES_AS_ROOT_HERE
+ SendEmailAsRoot = GSUB_SEND_EMAIL_AS_ROOT_HERE
+
+[ Help ]
+ WebBrowser = /usr/X11R6/bin/netscape
+
+[ Modem ]
+ PortName = GSUB_MODEM_PORT_NAME
+ ModemAllowedPortNames = GSUB_MODEM_ALLOWED_PORT_NAMES
--- /dev/null
+#!/bin/sh
+# @(#)xpowerchute 1.12
+# Copyright 1992, American Power Conversion, Inc.
+#
+
+PWRCHUTE=/usr/lib/powerchute
+export PWRCHUTE
+
+# we need to determine if powerchute is running
+# and if it is, are we in local or network mode?
+
+if [ "`ps ax | grep pwrchu | grep -v grep 2>/dev/null`" != "" ]; then
+ #powerchute is running
+ #check to see if usetcp is set to no
+
+ if grep -iqs "usetcp.*no" /etc/powerchute.ini >/dev/null 2>/dev/null; then
+ # usetcp is set to no.
+ echo "Can't run more than one version of "
+ echo "PowerChute Client in Local Mode."
+ else
+ exec $PWRCHUTE/_xpwrchute
+ fi
+else
+ # powerchute is not running. Go ahead and launch it.
+ exec $PWRCHUTE/_xpwrchute
+fi
--- /dev/null
+#!/bin/sh
+#
+# Copyright 1999 American Power Conversion, All Rights Reserved
+#
+# Revision History:
+# msamson 01Apr99 For Linux, we have to remove upsoff.cmd, because we cannot
+# remove this file once all filesystems have been unmounted
+# in our shutdown script.
+# msamson 04Oct99 Incorporated standard init fixes from Redhat
+# (pjones@redhat.com)
+#
+# chkconfig: 2345 98 92
+# description: Uninterruptable Power Supply Monitoring Daemon
+#
+#
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+# Demon specified configuration.
+[ -f /etc/sysconfig/upsd ] && . /etc/sysconfig/upsd
+
+PWRCHUTE=/usr/lib/powerchute
+export PWRCHUTE
+TMPDIR=/tmp
+export TMPDIR
+
+if [ -r /upsoff.cmd ]; then
+ rm -f /upsoff.cmd
+fi
+
+# See how we were called.
+case "$1" in
+ start)
+ # Check if the service is already running?
+ if [ ! -f /var/lock/subsys/upsd ]; then
+ msg_starting UPSd
+ cd $PWRCHUTE
+ daemon upsd
+ RETVAL=$?
+ if [ $RETVAL -eq 0 ]; then
+ touch /var/lock/subsys/upsd
+ fi
+ else
+ msg_Already_Running UPSd
+ exit 1
+ fi
+ ;;
+ stop)
+ if [ -f /var/lock/subsys/upsd ]; then
+ msg_stopping UPSd
+ killproc upsd
+ rm -f /var/lock/subsys/upsd >/dev/null 2>&1
+ else
+ msg_Not_Running UPSd
+ exit 1
+ fi
+ ;;
+ status)
+ status upsd
+ ;;
+ reload|force-reload|restart)
+ $0 stop
+ $0 start
+ exit $?
+ ;;
+ *)
+ msg_Usage "$0 {start|stop|status|restart|reload|force-reload}"
+ exit 1
+ ;;
+esac
+
+exit $RETVAL
projects / packages / PowerChutePlus.git / commitdiff