# Interface to the Expat XML parser
#
-diff -Nur Python-2.0b1.orig/Modules/Setup.in.orig Python-2.0b1/Modules/Setup.in.orig
---- Python-2.0b1.orig/Modules/Setup.in.orig Thu Jan 1 01:00:00 1970
-+++ Python-2.0b1/Modules/Setup.in.orig Thu Aug 31 18:11:07 2000
-@@ -0,0 +1,433 @@
-+# -*- makefile -*-
-+# The file Setup is used by the makesetup script to construct the files
-+# Makefile and config.c, from Makefile.pre and config.c.in,
-+# respectively. The file Setup itself is initially copied from
-+# Setup.in; once it exists it will not be overwritten, so you can edit
-+# Setup to your heart's content. Note that Makefile.pre is created
-+# from Makefile.pre.in by the toplevel configure script.
-+
-+# (VPATH notes: Setup and Makefile.pre are in the build directory, as
-+# are Makefile and config.c; the *.in files are in the source
-+# directory.)
-+
-+# Each line in this file describes one or more optional modules.
-+# Comment out lines to suppress modules.
-+# Lines have the following structure:
-+#
-+# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
-+#
-+# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
-+# <cpparg> is anything starting with -I, -D, -U or -C
-+# <library> is anything ending in .a or beginning with -l or -L
-+# <module> is anything else but should be a valid Python
-+# identifier (letters, digits, underscores, beginning with non-digit)
-+#
-+# (As the makesetup script changes, it may recognize some other
-+# arguments as well, e.g. *.so and *.sl as libraries. See the big
-+# case statement in the makesetup script.)
-+#
-+# Lines can also have the form
-+#
-+# <name> = <value>
-+#
-+# which defines a Make variable definition inserted into Makefile.in
-+#
-+# Finally, if a line contains just the word "*shared*" (without the
-+# quotes but with the stars), then the following modules will not be
-+# included in the config.c file, nor in the list of objects to be
-+# added to the library archive, and their linker options won't be
-+# added to the linker options, but rules to create their .o files and
-+# their shared libraries will still be added to the Makefile, and
-+# their names will be collected in the Make variable SHAREDMODS. This
-+# is used to build modules as shared libraries. (They can be
-+# installed using "make sharedinstall", which is implied by the
-+# toplevel "make install" target.) (For compatibility,
-+# *noconfig* has the same effect as *shared*.)
-+#
-+# In addition, *static* reverses this effect (negating a previous
-+# *shared* line).
-+
-+# NOTE: As a standard policy, as many modules as can be supported by a
-+# platform should be present. The distribution comes with all modules
-+# enabled that are supported by most platforms and don't require you
-+# to ftp sources from elsewhere.
-+
-+
-+# Some special rules to define PYTHONPATH.
-+# Edit the definitions below to indicate which options you are using.
-+# Don't add any whitespace or comments!
-+
-+# Directories where library files get installed.
-+# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
-+DESTLIB=$(LIBDEST)
-+MACHDESTLIB=$(BINLIBDEST)
-+
-+# NOTE: all the paths are now relative to the prefix that is computed
-+# at run time!
-+
-+# Standard path -- don't edit.
-+# No leading colon since this is the first entry.
-+# Empty since this is now just the runtime prefix.
-+DESTPATH=
-+
-+# Site specific path components -- should begin with : if non-empty
-+SITEPATH=
-+
-+# Standard path components for test modules
-+TESTPATH=
-+
-+# Path components for machine- or system-dependent modules and shared libraries
-+MACHDEPPATH=:plat-$(MACHDEP)
-+
-+COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(TKPATH)
-+PYTHONPATH=$(COREPYTHONPATH)
-+
-+
-+# The modules listed here can't be built as shared libraries for
-+# various reasons; therefore they are listed here instead of in the
-+# normal order.
-+
-+# Some modules that are normally always on:
-+
-+regex regexmodule.c regexpr.c # Regular expressions, GNU Emacs style
-+pcre pcremodule.c pypcre.c # Regular expressions, Perl style (for re.py)
-+posix posixmodule.c # posix (UNIX) system calls
-+signal signalmodule.c # signal(2)
-+_sre _sre.c # Fredrik Lundh's new regular expressions
-+
-+# The SGI specific GL module:
-+
-+GLHACK=-Dclear=__GLclear
-+#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11
-+
-+# Pure module. Cannot be linked dynamically.
-+# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
-+#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
-+#PURE_INCLS=-I/usr/local/include
-+#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
-+#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
-+
-+# Uncommenting the following line tells makesetup that all following
-+# modules are to be built as shared libraries (see above for more
-+# detail; also note that *static* reverses this effect):
-+
-+#*shared*
-+
-+# GNU readline. Unlike previous Python incarnations, GNU readline is
-+# now incorporated in an optional module, configured in the Setup file
-+# instead of by a configure script switch. You may have to insert a
-+# -L option pointing to the directory where libreadline.* lives,
-+# and you may have to change -ltermcap to -ltermlib or perhaps remove
-+# it, depending on your system -- see the GNU readline instructions.
-+# It's okay for this to be a shared library, too.
-+
-+#readline readline.c -lreadline -ltermcap
-+
-+
-+# Modules that should always be present (non UNIX dependent):
-+
-+array arraymodule.c # array objects
-+cmath cmathmodule.c # -lm # complex math library functions
-+math mathmodule.c # -lm # math library functions, e.g. sin()
-+strop stropmodule.c # fast string operations implemented in C
-+struct structmodule.c # binary structure packing/unpacking
-+time timemodule.c # -lm # time operations and variables
-+operator operator.c # operator.add() and similar goodies
-+_codecs _codecsmodule.c # access to the builtin codecs and codec registry
-+
-+unicodedata unicodedata.c unicodedatabase.c
-+ # static Unicode character database
-+ucnhash ucnhash.c # Unicode Character Name expansion hash table
-+
-+_locale _localemodule.c # access to ISO C locale support
-+
-+
-+# Modules with some UNIX dependencies -- on by default:
-+# (If you have a really backward UNIX, select and socket may not be
-+# supported...)
-+
-+fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
-+pwd pwdmodule.c # pwd(3)
-+grp grpmodule.c # grp(3)
-+errno errnomodule.c # posix (UNIX) errno values
-+mmap mmapmodule.c # Memory-mapped files (also works on Win32)
-+select selectmodule.c # select(2); not on ancient System V
-+_socket socketmodule.c # socket(2)
-+
-+# Socket module compiled with SSL support; you must edit the SSL variable:
-+#SSL=/usr/local/ssl
-+#_socket socketmodule.c \
-+# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
-+# -L$(SSL)/lib -lssl -lcrypto
-+
-+# The crypt module is now disabled by default because it breaks builds
-+# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
-+#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
-+
-+
-+# Some more UNIX dependent modules -- off by default, since these
-+# are not supported by all UNIX systems:
-+
-+#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
-+#termios termios.c # Steen Lumholt's termios module
-+#resource resource.c # Jeremy Hylton's rlimit interface
-+
-+
-+# Multimedia modules -- off by default.
-+# These don't work for 64-bit platforms!!!
-+# These represent audio samples or images as strings:
-+
-+#audioop audioop.c # Operations on audio samples
-+#imageop imageop.c # Operations on images
-+#rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably)
-+
-+
-+# The md5 module implements the RSA Data Security, Inc. MD5
-+# Message-Digest Algorithm, described in RFC 1321. The necessary files
-+# md5c.c and md5.h are included here.
-+
-+md5 md5module.c md5c.c
-+
-+
-+# The sha module implements the SHA checksum algorithm.
-+# (NIST's Secure Hash Algorithm.)
-+sha shamodule.c
-+
-+
-+# The mpz module interfaces to the GNU Multiple Precision library.
-+# You need to ftp the GNU MP library.
-+# The GMP variable must point to the GMP source directory.
-+# This was originally written and tested against GMP 1.2 and 1.3.2.
-+# It has been modified by Rob Hooft to work with 2.0.2 as well, but I
-+# haven't tested it recently.
-+
-+# A compatible MP library unencombered by the GPL also exists. It was
-+# posted to comp.sources.misc in volume 40 and is widely available from
-+# FTP archive sites. One URL for it is:
-+# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
-+
-+#GMP=/ufs/guido/src/gmp
-+#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a
-+
-+
-+# SGI IRIX specific modules -- off by default.
-+
-+# These module work on any SGI machine:
-+
-+# *** gl must be enabled higher up in this file ***
-+#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager
-+#sgi sgimodule.c # sgi.nap() and a few more
-+
-+# This module requires the header file
-+# /usr/people/4Dgifts/iristools/include/izoom.h:
-+#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities
-+
-+
-+# These modules require the Multimedia Development Option (I think):
-+
-+#al almodule.c -laudio # Audio Library
-+#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library
-+#cl clmodule.c -lcl -lawareaudio # Compression Library
-+#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video
-+
-+
-+# The FORMS library, by Mark Overmars, implements user interface
-+# components such as dialogs and buttons using SGI's GL and FM
-+# libraries. You must ftp the FORMS library separately from
-+# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
-+# NOTE: if you want to be able to use FORMS and curses simultaneously
-+# (or both link them statically into the same binary), you must
-+# compile all of FORMS with the cc option "-Dclear=__GLclear".
-+
-+# The FORMS variable must point to the FORMS subdirectory of the forms
-+# toplevel directory:
-+
-+#FORMS=/ufs/guido/src/forms/FORMS
-+#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl
-+
-+
-+# SunOS specific modules -- off by default:
-+
-+#sunaudiodev sunaudiodev.c
-+
-+
-+# Linux specific modules -- off by default:
-+
-+#linuxaudiodev linuxaudiodev.c
-+
-+
-+# George Neville-Neil's timing module:
-+
-+#timing timingmodule.c
-+
-+
-+# The _tkinter module.
-+#
-+# The TKPATH variable is always enabled, to save you the effort.
-+TKPATH=:lib-tk
-+
-+# The command for _tkinter is long and site specific. Please
-+# uncomment and/or edit those parts as indicated. If you don't have a
-+# specific extension (e.g. Tix or BLT), leave the corresponding line
-+# commented out. (Leave the trailing backslashes in! If you
-+# experience strange errors, you may want to join all uncommented
-+# lines and remove the backslashes -- the backslash interpretation is
-+# done by the shell's "read" command and it may not be implemented on
-+# every system.
-+
-+# *** Always uncomment this (leave the leading underscore in!):
-+# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
-+# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
-+# -I/usr/local/include \
-+# *** Uncomment and edit to reflect where your X11 header files are:
-+# -I/usr/X11R6/include \
-+# *** Or uncomment this for Solaris:
-+# -I/usr/openwin/include \
-+# *** Uncomment and edit for Tix extension only:
-+# -DWITH_TIX -ltix4.1.8.0 \
-+# *** Uncomment and edit for BLT extension only:
-+# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
-+# *** Uncomment and edit for PIL (TkImaging) extension only:
-+# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
-+# *** Uncomment and edit for TOGL extension only:
-+# -DWITH_TOGL togl.c \
-+# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
-+# -L/usr/local/lib \
-+# *** Uncomment and edit to reflect your Tcl/Tk versions:
-+# -ltk8.0 -ltcl8.0 \
-+# *** Uncomment and edit to reflect where your X11 libraries are:
-+# -L/usr/X11R6/lib \
-+# *** Or uncomment this for Solaris:
-+# -L/usr/openwin/lib \
-+# *** Uncomment these for TOGL extension only:
-+# -lGL -lGLU -lXext -lXmu \
-+# *** Uncomment for AIX:
-+# -lld \
-+# *** Always uncomment this; X11 libraries to link with:
-+# -lX11
-+
-+# Lance Ellinghaus's modules:
-+
-+rotor rotormodule.c # enigma-inspired encryption
-+#syslog syslogmodule.c # syslog daemon interface
-+
-+
-+# Curses support, requring the System V version of curses, often
-+# provided by the ncurses library. e.g. on Linux, link with -lncurses
-+# instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
-+# -L/usr/5lib before -lcurses).
-+
-+#_curses _cursesmodule.c -lcurses -ltermcap
-+
-+
-+
-+# Tommy Burnette's 'new' module (creates new empty objects of certain kinds):
-+
-+new newmodule.c
-+
-+
-+# Generic (SunOS / SVR4) dynamic loading module.
-+# This is not needed for dynamic loading of Python modules --
-+# it is a highly experimental and dangerous device for calling
-+# *arbitrary* C functions in *arbitrary* shared libraries:
-+
-+#dl dlmodule.c
-+
-+
-+# Modules that provide persistent dictionary-like semantics. You will
-+# probably want to arrange for at least one of them to be available on
-+# your machine, though none are defined by default because of library
-+# dependencies. The Python module anydbm.py provides an
-+# implementation independent wrapper for these; dumbdbm.py provides
-+# similar functionality (but slower of course) implemented in Python.
-+
-+# The standard Unix dbm module:
-+
-+#dbm dbmmodule.c # dbm(3) may require -lndbm or similar
-+
-+# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
-+
-+#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
-+
-+
-+# Berkeley DB interface.
-+#
-+# This requires the Berkeley DB code, see
-+# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz
-+#
-+# Edit the variables DB and DBPORT to point to the db top directory
-+# and the subdirectory of PORT where you built it.
-+#
-+# (See http://www.jenkon-dev.com/~rd/python/ for an interface to
-+# BSD DB 2.1.0.)
-+
-+# Note: If a db.h file is found by configure, bsddb will be enabled
-+# automatically via Setup.config.in
-+
-+#DB=/depot/sundry/src/berkeley-db/db.1.85
-+#DBPORT=$(DB)/PORT/irix.5.3
-+#bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a
-+
-+
-+
-+# David Wayne Williams' soundex module (obsolete -- this will disappear!)
-+#soundex soundex.c
-+
-+# Helper module for various ascii-encoders
-+binascii binascii.c
-+
-+# Fred Drake's interface to the Python parser
-+parser parsermodule.c
-+
-+# Digital Creations' cStringIO and cPickle
-+cStringIO cStringIO.c
-+cPickle cPickle.c
-+
-+
-+# Lee Busby's SIGFPE modules.
-+# The library to link fpectl with is platform specific.
-+# Choose *one* of the options below for fpectl:
-+
-+# For SGI IRIX (tested on 5.3):
-+#fpectl fpectlmodule.c -lfpe
-+
-+# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
-+# (Without the compiler you don't have -lsunmath.)
-+#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
-+
-+# For other systems: see instructions in fpectlmodule.c.
-+#fpectl fpectlmodule.c ...
-+
-+# Test module for fpectl. No extra libraries needed.
-+#fpetest fpetestmodule.c
-+
-+# Andrew Kuchling's zlib module.
-+# This require zlib 1.1.3 (or later).
-+# See http://www.cdrom.com/pub/infozip/zlib/
-+#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
-+
-+# Interface to the Expat XML parser
-+#
-+# Expat is written by James Clark and must be downloaded separately
-+# (see below). The pyexpat module was written by Paul Prescod after a
-+# prototype by Jack Jansen.
-+#
-+# The Expat dist includes Windows .lib and .dll files. Home page is at
-+# http://www.jclark.com/xml/expat.html, the current production release is
-+# always ftp://ftp.jclark.com/pub/xml/expat.zip.
-+#
-+# EXPAT_DIR, below, should point to the expat/ directory created by
-+# unpacking the Expat source distribution.
-+#
-+# Note: the expat build process doesn't yet build a libexpat.a; you can
-+# do this manually while we try convince the author to add it. To do so,
-+# cd to EXPAT_DIR, run "make" if you have not done so, then run:
-+#
-+# ar cr libexpat.a xmltok/*.o xmlparse/*.o
-+#
-+#EXPAT_DIR=/usr/local/src/expat
-+#pyexpat pyexpat.c -I$(EXPAT_DIR)/xmlparse -L$(EXPAT_DIR) -lexpat
-+
-+
-+# Example -- included for reference only:
-+# xx xxmodule.c
projects / packages / python.git / commitdiff