(cd src; make CFLAGS="$(CFLAGS)")
install:
- install -d $(ROOT)/etc/profile.d $(ROOT)/sbin
- install inittab $(ROOT)/etc
- install adjtime $(ROOT)/etc
- install setsysfont $(ROOT)/sbin
- install lang.sh $(ROOT)/etc/profile.d
+ mkdir -p $(ROOT)/etc/profile.d $(ROOT)/sbin
+ install -m644 inittab $(ROOT)/etc
+ install -m644 adjtime $(ROOT)/etc
+ install -m644 inputrc $(ROOT)/etc
+ install -m755 setsysfont $(ROOT)/sbin
+ install -m755 lang.sh $(ROOT)/etc/profile.d
cp -af rc.d sysconfig ppp $(ROOT)/etc
- install -d $(ROOT)/sbin
+ mkdir -p $(ROOT)/sbin
mv $(ROOT)/etc/sysconfig/network-scripts/ifup $(ROOT)/sbin
mv $(ROOT)/etc/sysconfig/network-scripts/ifdown $(ROOT)/sbin
(cd $(ROOT)/etc/sysconfig/network-scripts; \
ln -sf ../../../sbin/ifup . ; \
ln -sf ../../../sbin/ifdown . )
(cd src; make install ROOT=$(ROOT))
- install -d $(ROOT)/var/run/netreport
+ mkdir -p /var/run/netreport
+ chmod og=rwx,o=rx /var/run/netreport
tag-archive:
- @cvs tag -F $(CVSTAG)
+ @cvs -Q tag -F $(CVSTAG)
create-archive: tag-archive
@rm -rf /tmp/initscripts
- @cd /tmp; cvs export -r$(CVSTAG) initscripts
+ @cd /tmp; cvs -Q -d $(CVSROOT) export -r$(CVSTAG) initscripts || echo GRRRrrrrr -- ignore [export aborted]
@mv /tmp/initscripts /tmp/initscripts-$(VERSION)
@cd /tmp; tar czSpf initscripts-$(VERSION).tar.gz initscripts-$(VERSION)
@rm -rf /tmp/initscripts-$(VERSION)
#
# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
# Modified for RHS Linux by Marc Ewing and Donnie Barnes
-# Modified for PLD Linux by Wojtek ¦lusarczyk
+#
# Default runlevel. The runlevels used by PLD are:
# 0 - halt (Do NOT set initdefault to this)
ud::once:/sbin/update
# Trap CTRL-ALT-DELETE
-#ca::ctrlaltdel:/sbin/shutdown -t3 -r now
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# When our UPS tells us power has failed, assume we have a few minutes
# of power left. Schedule a shutdown for 2 minutes from now.
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6
+7:2345:respawn:/sbin/mingetty tty7
+8:2345:respawn:/sbin/mingetty tty8
# Run xdm in runlevel 5
-x:5:respawn:/usr/bin/X11/xdm -nodaemon
-
+#x:5:respawn:/usr/bin/X11/xdm -nodaemon
--- /dev/null
+set input-meta on
+set convert-meta off
+set output-meta on
#!/bin/bash
+
if [ -f /etc/sysconfig/i18n ]; then
- . /etc/sysconfig/i18n
+ . /etc/sysconfig/i18n
+
+ if [ -n "$LANG" ]; then
+ export LANG
+ fi
- if [ -n "$LANG" ]; then
- export LANG
- fi
+ if [ -n "$LC_ALL" ]; then
+ export LC_ALL
+ fi
- if [ -n "$LINGUAS" ]; then
- export LINGUAS
- fi
+ if [ -n "$LINGUAS" ]; then
+ export LINGUAS
+ fi
- if [ -n "$SYSTERM" ]; then
- export TERM=$SYSTERM
- fi
+ if [ -n "$SYSTERM" ]; then
+ export TERM=$SYSTERM
+ fi
+
+ # Set console font map.
+ if [ -n "$UNIMAP" ]; then
+ loadunimap $UNIMAP
+ fi
+
+ if [ -n "$SYSTERM" ] ; then
+ case $SYSTERM in
+ linux-lat)
+ LESSCHARSET=latin1
+ INPUTRC=/etc/inputrc
+ export LESSCHARSET INPUTRC
+ ;;
+ esac
+ fi
fi
--- /dev/null
+Summary: inittab and /etc/rc.d scripts
+Name: rc-scripts
+Version: 0.0.1
+Copyright: GPL
+Group: Base
+Group(pl): Bazowe
+Release: 1
+Source: %{name}-%{version}.tar.gz
+Buildroot: /tmp/buildroot-%{name}-%{version}
+Requires: mingetty
+Requires: mktemp
+Requires: modutils >= 2.1.121
+Prereq: /sbin/chkconfig
+Obsoletes: initscripts
+Summary(de): inittab und /etc/rc.d Scripts
+Summary(fr): inittab et scripts /etc/rc.d
+Summary(pl): inittab i skrypty startowe z katalogu /etc/rc.d
+Summary(tr): inittab ve /etc/rc.d dosyalarý
+
+%description
+This package contains the scripts use to boot a system, change run
+levels, and shut the system down cleanly. It also contains the scripts
+that activate and deactivate most network interfaces.
+
+%description -l de
+Dieses Paket enthält die Scripts, die zum Hochfahren des Systems, Ändern
+der Betriebsebene und sauberem Herunterfahren des Systems erforderlich sind.
+Außerdem enthält es die Scripts, die Netzwerkschnittstellen aktivieren und
+deaktivieren.
+
+%description -l fr
+Ce package contient les scripts utilisés pour démarrer le systéme,
+changer les niveaux d'exécution, et arréter le systéme proprement.
+Il contient aussi les scripts qui activent et désactivent la plupart
+des inetrfaces réseau.
+
+%description -l pl
+Pakiet zawiera skrypty uruchamiane przy starcie i zamykaniu systemu, a
+tak¿e przy zmianie poziomu uruchomienia.
+
+%description -l tr
+Bu paket, sistem açmak, çalýþma düzeylerini deðiþtirmek ve sistemi düzgün bir
+þekilde kapatmak için gereken dosyalarý içerir. Ayrýca pek çok bilgisayar aðý
+arayüzlerini etkinleþtiren ya da edilginleþtiren programcýklar içerir.
+
+%prep
+%setup -q
+
+%build
+CFLAGS="$RPM_OPT_FLAGS -w" make
+
+%install
+rm -rf $RPM_BUILD_ROOT
+
+install -d $RPM_BUILD_ROOT/{etc,/var/{log,run/netreport}}
+
+make ROOT=$RPM_BUILD_ROOT install
+
+install -d $RPM_BUILD_ROOT/etc/rc.d/rc{0,1,2,3,4,5,6}.d
+
+bzip2 -9 $RPM_BUILD_ROOT/usr/man/man1/*.1
+bzip2 -9 sysconfig.txt
+bzip2 sysconfig/network-scripts/ifcfg-*.*
+bzip2 sysconfig/network-scripts/chat-*.*
+
+
+%post
+for i in halt network nfsfs random reboot single
+ do /sbin/chkconfig --add $i
+done
+
+%preun
+if [ $1 = 0 ]; then
+ /sbin/chkconfig --del random
+ /sbin/chkconfig --del nfsfs
+ /sbin/chkconfig --del network
+fi
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(644,root,root,754)
+%doc sysconfig.txt.bz2
+%doc sysconfig/network-scripts/ifcfg-*.*.bz2
+%doc sysconfig/network-scripts/chat-*.*.bz2
+
+%config(noreplace) %verify(not md5 mtime size) /etc/adjtime
+%config(noreplace) %verify(not md5 mtime size) /etc/inittab
+
+%attr(640,root,root) %config(noreplace) %verify(not size mtime md5) /etc/sysconfig/network-ip6
+%attr(640,root,root) %config(noreplace) %verify(not size mtime md5) /etc/sysconfig/network-ip6.conf
+
+%attr(754,root,root) %dir /etc/sysconfig/network-scripts
+%attr(644,root,root) %config /etc/sysconfig/network-scripts/ifcfg-lo
+%attr(644,root,root) %config /etc/sysconfig/network-scripts/network-*
+%attr(754,root,root) %config /etc/sysconfig/network-scripts/ifdhcpc-done
+%attr(754,root,root) %config /etc/sysconfig/network-scripts/ifup
+%attr(754,root,root) %config /etc/sysconfig/network-scripts/ifup-*
+%attr(754,root,root) %config /etc/sysconfig/network-scripts/ifdown
+%attr(754,root,root) %config /etc/sysconfig/network-scripts/ifdown-*
+
+%attr(755,root,root) /etc/rc.d/init.d/*
+%attr(755,root,root) /etc/rc.d/rc[0123456].d
+
+%attr(750,root,root) %config /etc/rc.d/rc.sysinit
+%attr(750,root,root) %config /etc/rc.d/rc.serial
+%attr(750,root,root) %config /etc/rc.d/rc
+%attr(700,root,root) %config(noreplace) %verify(not size mtime md5) /etc/rc.d/rc.local
+%attr(755,root,root) %config /etc/profile.d/lang.sh
+%attr(750,root,root) /sbin/*
+%attr(755,root,root) /bin/*
+%attr(755,root,root) /usr/sbin/usernetctl
+
+%attr(750,root,root) %dir /var/run/netreport
+%attr(750,root,root) %config /etc/ppp/*
+
+%attr(644,root, man) /usr/man/man1/*
+
+%changelog
+* Fri Mar 19 1999 PLD Team <bugs@pld.org.pl>
+ [0.0.1]
+- Full changelog in PLD's CVS.
+- First Release.
+- Package based on RedHat's initscripts-3.78.
-#!/bin/bash
-#
# functions This file contains functions to be used by most or all
# shell scripts in the /etc/init.d directory.
#
-# Version: @(#) /etc/init.d/functions 1.01 26-Oct-1993
+# Version: @(#) /etc/init.d/functions $Revision: 1.3 $ $Date: 1999/06/14 20:08:16 $
#
# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
# Hacked by: Greg Galloway and Marc Ewing
#
# First set up a default search path.
-export PATH="/sbin:/usr/sbin:/bin:/usr/bin"
+PATH="/sbin:/usr/sbin:/bin:/usr/bin"; export PATH
# Some functions to handle PLD-style messages
-show()
-{
- text="$*".............................................
- echo -ne `echo $text | cut -c1-45`
-}
-
-busy()
-{
- echo -n "`tput setaf 6`[`tput setaf 5` BUSY `tput setaf 6`]`tput setaf 7`"
+function show {
+ text="$*".............................................
+ echo -ne `echo $text | cut -c1-45`
}
-ok()
-{
- echo "`tput setaf 6`[`tput setaf 2` DONE `tput setaf 6`]`tput setaf 7`"
+function busy {
+ echo -ne "`tput setaf 6`[`tput setaf 5` BUSY `tput setaf 6`]`tput setaf 7`"
}
-started()
-{
- echo "`tput setaf 6`[`tput setaf 2` WORK `tput setaf 6`]`tput setaf 7`"
+function ok {
+ echo -ne "`tput setaf 6`[`tput setaf 2` DONE `tput setaf 6`]`tput setaf 7`"
}
-fail()
-{
- echo "`tput setaf 6`[`tput setaf 1` FAIL `tput setaf 6`]`tput setaf 7`"
+function fail {
+ echo -ne "`tput setaf 6`[`tput setaf 1` FAIL `tput setaf 6`]`tput setaf 7`"
}
-died()
-{
- echo "`tput setaf 6`[`tput setaf 1` DIED `tput setaf 6`]`tput setaf 7`"
+function died {
+ echo -ne "`tput setaf 6`[`tput setaf 1` DIED `tput setaf 6`]`tput setaf 7`"
}
-deltext()
-{
- echo -ne '\b\b\b\b\b\b\b\b'
+function deltext {
+ echo -ne '\b\b\b\b\b\b\b\b'
}
# A function to start a program.
# TERM first, then KILL if not dead
kill -TERM $pid &> $TMPFILE
usleep 100000
- dead=`ps aux | awk '{print $2}' | grep $pid`
+ dead=`ps -o pid= $pid`
if [ "$dead" != "" ]; then
sleep 3
kill -KILL $pid &> $TMPFILE
fi
# Next try "pidof"
- pid=`pidof $1`
+ #pid=`pidof $1`
if [ "$pid" != "" ] ; then
echo $pid
return 0
fi
# Finally try to extract it from ps
- ps auxw | awk 'BEGIN { prog=ARGV[1]; ARGC=1 }
- { if ((prog == $11) || (("(" prog ")") == $11) ||
- ((prog ":") == $11)) { print $2 } }' $1
+ echo `ps -C $1 -o pid=`
+ return 0
}
+
status() {
# Test syntax.
if [ $# = 0 ] ; then
echo "$1 (pid $pid) is running..."
return 0
else
- pid=`ps auxww | grep $1 | egrep -v grep\|$0 | awk '{print $2}'`
+ pid=`echo \`ps -C $1 -o pid= \``
if [ "$pid" != "" ] ; then
- echo "$1 (pid $pid) is running..."
+ echo "$1 (pid $pid) is running..."
return 0
fi
fi
-#!/bin/bash
+#!/bin/sh
#
#!F:functions-ip6
#
# tunnels-up-ip6, tunnels-down-ip6
#
#!C:Copyright 1997-1998 Peter Bieringer <pb@bieringer.de>
+#!C:some code by Gregorz Stanislawski <stangrze@open.net.pl>
#
-#!V:Version: 2.39 01.05.1998
+#!V:Version: 2.41a 10.11.1998
#
-# Changes from:
-# 2.32: exchange 'exit' with 'return' (bad mistake...)
-# 2.33: new debug level (bit 2)
-# 2.34: minor improvements
-# 2.35: info
-# 2.36: add IP6FORWARDING switch (to differ between a host and a router)
-# 2.37: add forwarding switch for kernel versions >= 2.1.90 (idea by Dan Anderson anderson@computer.org)
-# 2.38: make IP6FORWARDING independed from IP6GATEWAYCONFIG
-
+# Changes to:
+# 2.34: new debug level (bit 2)
+# 2.35: minor improvements
+# 2.36: info
+# 2.37: add IP6FORWARDING switch (to differ between a host and a router)
+# 2.38: add forwarding switch for kernel versions >= 2.1.90
+# (idea by Dan Anderson anderson@computer.org)
+# 2.39: make IP6FORWARDING independed from IP6GATEWAYCONFIG
+# 2.40: NBMA tunnel setup support, see 'network-ip6.conf v2.11+' for details
+# 2.41: Error sign to get a right exit value of each function (only 0 = ok)
+# 2.41a:
+# - Scripts now make use of iproute2 package by Alexey Kuznietsov.
+# - Config file splited to 2 files: network-ip6.conf & tunnels-ip6.conf.
+# - Changes to file layout. for better incorporation into PLD or Redhat systems.
+# - Removed support for radvd (Most of people use mrtd anyway)
+# - Removed support fod nbma tunnel conf.
+
IP6NETWORKFILE=/etc/sysconfig/network-ip6
# debug level & 2 prevents from executing any network configuration
# debug level & 4 shows messages in the test section
+# Return values
+# 0 = ok
+# 1 = error occurs
+# 2 = not enabled, i.e. no IPv6 kernel support or switched off by configuration
+
+# File as error sign
+EXITFAIL=/tmp/functions-ip6.error
+
##### Test for IPv6
function test-ip6()
{
+ # Remove error sign file
+ rm -f $EXITFAIL
+
if [ "$IP6DEBUG" = "" ] ; then IP6DEBUG=0; fi
if ! [ $[ $IP6DEBUG & 4 ] = 0 ] ; then
fi
if ! [ -f /proc/net/if_inet6 ]; then
- if ! [ $[ $IP6DEBUG & 4 ] = 0 ] ; then
- echo -e "\a Not compiled for IPv6 - stop!"
- else
- echo -e "\a Kernel not compiled for IPv6 - stop!"
- fi
- return 1
+ return 2
else
if ! [ $[ $IP6DEBUG & 4 ] = 0 ] ; then
echo " Ok!"
if ! [ "$IP6NETWORKING" = "yes" ] ; then
if ! [ $[ $IP6DEBUG & 4 ] = 0 ] ; then
echo -e "\a No - stop!"
+ else
+ echo -e "\a IPv6 configuration isn't enabled - stop!"
fi
- return 3
+ return 2
else
if ! [ $[ $IP6DEBUG & 4 ] = 0 ] ; then
echo " Yes!"
function ifup-routes-ip6()
{
# Run IPv6 test
- test-ip6 || return 1
+ test-ip6 || return
# Allow forwarding option, host is a router?
if [ "$IP6FORWARDING" = "yes" ]; then
# Switch on IPv6 forwarding in the kernel if off
+ # Which mechanism? kernel >= 2.1.90 uses forwarding switch by device
+ if [ -f /proc/sys/net/ipv6/forwarding ]; then
+ # for kernel < 2.1.90
+ if ! [ "`cat /proc/sys/net/ipv6/forwarding`" = "1" ]; then
+ echo " Switch on IPv6 forwarding in the kernel"
+ if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
+ echo "1" > /proc/sys/net/ipv6/forwarding
+ fi
+ fi
+ fi
+
if [ -f /proc/sys/net/ipv6/conf/all/forwarding ]; then
-
+ # for kernel >= 2.1.90
for i in /proc/sys/net/ipv6/conf/*/forwarding; do
if ! [ "`cat $i`" = "1" ]; then
device=`echo $i | cut -d / -f 7`
# Device "lo" need no IPv6 configuration
if [ "$1" = "lo" ]; then
+ echo " Device lo needs no IPv6 routing configuration"
return 1;
fi
grep "^$1" $IP6ROUTEFILE | while read device key gateway route; do
if [ "$key" = "route" ]; then
- echo " Add IPv6 route $route gw $gateway dev $device"
+ echo " Add IPv6 route $route via $gateway dev $device"
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- route -A inet6 add $route gw $gateway dev $device
+ route -A inet6 add $route gw $gateway metric 1 dev $device || touch $EXITFAIL
fi
fi
done
return-ip6
+
+ if [ -f $EXITFAIL ]; then
+ return 1
+ rm -f $EXITFAIL
+ else
+ return 0
+ fi
}
function ifdown-routes-ip6()
{
# Run IPv6 test
- test-ip6 || return 1
+ test-ip6 || return
if ! [ "$IP6GATEWAYCONFIG" = "yes" ]; then return 1; fi
echo " Clear IPv6 routes"
if [ "$1" = "" ]; then
+ echo -e "\a Usage: $0 <net-device>"
return 1
fi
# Device "lo" need no IPv6 configuration
if [ "$1" = "lo" ]; then
+ echo " Device lo needs no IPv6 routing configuration"
return 1;
fi
grep "^$1" $IP6ROUTEFILE | while read device key gateway route; do
if [ "$key" = "route" ]; then
- echo " Del IPv6 route $route gw $gateway dev $device"
+ echo " Del IPv6 route $route via $gateway dev $device"
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- route -A inet6 del $route gw $gateway dev $device
+ route -A inet6 del $route gw $gateway dev $device || touch $EXITFAIL
fi
fi
done
return-ip6
+
+ if [ -f $EXITFAIL ]; then
+ return 1
+ rm -f $EXITFAIL
+ else
+ return 0
+ fi
}
## Configure tunnels up
function tunnels-up-ip6()
{
+echo "test"
# Run IPv6 test
- test-ip6 || return 1
+ test-ip6 || return
if ! [ "$IP6TUNNELCONFIG" = "yes" ]; then return 1; fi
# get IPv6-over-IPv4 tunnels up (enables automatic to 0::0/96)
echo " Get IPv6-over-IPv4 tunnels up (enables automatic to 0::0/96)"
if [ $[ $IP6DEBUG & 2 ] = 0 ] ; then
- ifconfig sit0 up
+ ifconfig sit0 up || touch $EXITFAIL
fi
# Take configured tunnels from $IP6TUNNELFILE
- TUNNELDEV=1
-
- grep "^sit" $IP6TUNNELFILE | while read device key ip4gateway; do
-
- if [ "$device" = "sit$TUNNELDEV" ]; then
+ grep -v "^#" $IP6TUNNELFILE | while read device key local remote ttl realdev; do
if [ "$key" = "tunnel" ]; then
- echo " Add tunnel sit$TUNNELDEV to $ip4gateway"
+ echo " Add tunnel $device to $remote"
# Set up a tunnel
- if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- ifconfig sit0 tunnel ::$ip4gateway
- fi
+# if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
+# ifconfig sit0 tunnel ::$remote || touch $EXITFAIL
+# fi
# Start tunnel device sit?
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- ifconfig sit$TUNNELDEV up
+ iptunnel add $device mode sit remote $remote local $local ttl $ttl dev $realdev
+echo "Tunnel $device added"
+ ifconfig $device up arp multicast
+echo "Tunnel $device is configured and up"
+ route -A inet6 add fe80::$remote dev $device
+echo "Routing to $remote via $device added"
fi
- grep "^sit$TUNNELDEV" $IP6TUNNELFILE | while { read device key network; } do
+ grep "^$device" $IP6TUNNELFILE | while { read device key network; } do
if [ "$key" = "route" ]; then
- echo " Add route to tunnel sit$TUNNELDEV for network $network"
+ echo " Add route to tunnel $device for network $network"
# Set route to tunnel
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- route -A inet6 add $network gw fe80::$ip4gateway dev sit$TUNNELDEV
+ route -A inet6 add $network gw fe80::$remote dev $device || touch $EXITFAIL
fi
fi
done
- # Increment for next tunnel
- TUNNELDEV=$[ $TUNNELDEV + 1 ]
fi
- fi
done
-
-
-#won't work, problem with local scope in while...
-# if [ $[ $TUNNELDEV < 2 ] = 1 ]; then
-# echo -e "\a No tunnels configured!"
-# echo " $IP6TUNNELFILE: possible error in your tunnel setup!"
-# fi
return-ip6
+
+ if [ -f $EXITFAIL ]; then
+ return 1
+ rm -f $EXITFAIL
+ else
+ return 0
+ fi
}
function tunnels-down-ip6()
{
# Run IPv6 test
- test-ip6 || return 1
+ test-ip6 || return
if ! [ "$IP6TUNNELCONFIG" = "yes" ]; then return 1; fi
# Take configured tunnels from $IP6TUNNELFILE
- grep "^sit" $IP6TUNNELFILE | while read device key ip4gateway; do
-
- if [ "$device" = "sit$TUNNELDEV" ]; then
+ grep -v "^#" $IP6TUNNELFILE | while read device key local remote ttl realdev; do
if [ "$key" = "tunnel" ]; then
-
- grep "^sit$TUNNELDEV" $IP6TUNNELFILE | while read device key network; do
+ grep "^$device" $IP6TUNNELFILE | while read device key host; do
if [ "$key" = "route" ]; then
- echo " Del route to tunnel sit$TUNNELDEV for network $network"
+ echo " Del route to tunnel $device for host $host"
# Set route to tunnel
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- route -A inet6 del $network gw fe80::$ip4gateway dev sit$TUNNELDEV
+ route -A inet6 del $network gw fe80::$remote dev $device || touch $EXITFAIL
fi
fi
done
- echo " Delete tunnel sit$TUNNELDEV"
+ echo " Delete tunnel $device"
# Stop tunnel device sit?
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- ifconfig sit$TUNNELDEV down
+ ifconfig $device down
+ iptunnel del $device || touch $EXITFAIL
fi
- # Increment for next tunnel
- TUNNELDEV=$[ $TUNNELDEV + 1 ]
-
fi
- fi
done
# Stop IPv6-over-IPv4 tunnels
echo " Stop IPv6-over-IPv4 tunnels"
if [ $[ $IP6DEBUG & 2 ] = 0 ] ; then
echo " Delete basic tunnel device sit0"
- ifconfig sit0 down
+ ifconfig sit0 down || touch $EXITFAIL
fi
return-ip6
+
+ if [ -f $EXITFAIL ]; then
+ return 1
+ rm -f $EXITFAIL
+ else
+ return 0
+ fi
}
function ifup-ip6()
{
if [ "$1" = "" ]; then
+ echo -e "\a Usage: $0 <net-device>"
return 1
fi
# Device "lo" need no IPv6 configuration
if [ "$1" = "lo" ]; then
+ echo " Device lo needs no IPv6 configuration"
return 1;
fi
# Run IPv6 test
- test-ip6 || return 1
+ test-ip6 || return
echo " Brings interface $1 up for IPv6"
if [ "$key" = "iface" ]; then
echo " Add for dev $device IPv6 address $prefix:$suffix/$length"
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- ifconfig $device add $prefix:$suffix/$length
+ ifconfig $device add $prefix:$suffix/$length || touch $EXITFAIL
fi
echo " Add IPv6 route $prefix::0/$length through dev $device"
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- route -A inet6 add $prefix::0/$length dev $device
+ route -A inet6 add $prefix::0/$length dev $device || touch $EXITFAIL
fi
fi
done
return-ip6
+
+ if [ -f $EXITFAIL ]; then
+ return 1
+ rm -f $EXITFAIL
+ else
+ return 0
+ fi
}
function ifdown-ip6()
{
if [ "$1" = "" ]; then
+ echo -e "\a Usage: $0 <net-device>"
return 1
fi
if [ "$1" = "lo" ]; then return 0; fi
# Run IPv6 test
- test-ip6 || return 1
+ test-ip6 || return
echo " Brings interface $1 down from IPv6"
if [ "$key" = "iface" ]; then
echo " Del IPv6 route $prefix::0/$length through dev $device"
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- route -A inet6 del $prefix::0/$length dev $device
+ route -A inet6 del $prefix::0/$length dev $device || touch $EXITFAIL
fi
echo " Del for dev $device IPv6 address $prefix:$suffix/$length"
if [ $[ $IP6DEBUG & 2 ] = 0 ]; then
- ifconfig $device del $prefix:$suffix/$length
+ ifconfig $device del $prefix:$suffix/$length || touch $EXITFAIL
fi
fi
done
return-ip6
+
+ if [ -f $EXITFAIL ]; then
+ return 1
+ rm -f $EXITFAIL
+ else
+ return 0
+ fi
}
-#!/bin/bash
+#!/bin/sh
#
-# rc.halt This file is executed by init when it goes into runlevel
-# 0 (halt) or runlevel 6 (reboot). It kills all processes,
-# unmounts file systems and then either halts or reboots.
+# halt Script for system halt.
#
-# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-# Modified for RHS Linux by Damien Neil
+# chkconfig: 0 00 99
+# description: This file is executed by init when it goes into runlevel \
+# runlevel 0 (halt). It calls common code for halt/reboot \
+# from shutdwn which kills all processes, unmounts file \
+# systems and then either halts or reboots.
+#
+# Author: Grzegorz Stanislawski <stangrze@open.net.pl>
#
-
-# Set the path.
-PATH=/sbin:/bin:/usr/bin:/usr/sbin
# See how we were called.
-case "$0" in
- *halt)
- message="The system is halted"
- command="halt"
- ;;
- *reboot)
- message="Please stand by while rebooting the system..."
- command="reboot"
+case "$1" in
+ stop*)
+ exit 0
;;
- *)
- echo "$0: call me as \"rc.halt\" or \"rc.reboot\" please!"
- exit 1
+ start*)
+ . /etc/rc.d/init.d/shutdwn
+ echo "The system is halted"
+ [ -f /fastboot ] && echo "On the next boot fsck will be skipped."
+ eval halt -d
;;
esac
-
-# Kill all processes.
-[ "${BASH+bash}" = bash ] && enable kill
-
-echo "Sending all processes the TERM signal..."
-kill -15 -1
-sleep 5
-echo "Sending all processes the KILL signal.."
-kill -9 -1
-
-# Write to wtmp file before unmounting /var
-halt -w
-
-# Turn off swap, then unmount file systems.
-echo "Turning off swap"
-swapoff -a
-echo "Unmounting file systems"
-umount -a
-mount -n -o remount,ro /
-
-echo "Remounting remaining filesystems (if any) readonly"
-mount | awk '/ext2/ { print $3 }' | while read line; do
- mount -n -o ro,remount $line
-done
-
-# Now halt or reboot.
-echo "$message"
-[ -f /fastboot ] && echo "On the next boot fsck will be skipped."
-eval $command -d
-
-#!/bin/bash
+#!/bin/sh
# Bring down all unneeded services that are still running (there shouldn't
# be any, so this is just a sanity check)
-#!/bin/bash
+#!/bin/sh
#
# network Bring up/down networking
#
-# chkconfig: 345 10 97
+# chkconfig: 2345 10 90
# description: Activates/Deactivates all network interfaces configured to \
# start at boot time.
# probe: true
fi
if [ -f /etc/sysconfig/network-ip6 ]; then
- . /etc/sysconfig/network-ip6
+ . /etc/sysconfig/network-ip6
fi
+
# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
+[ "${NETWORKING}" = "no" ] && exit 0
[ -x /sbin/ifconfig ] || exit 0
# Load IPv6 module
-
-if [ ${IP6NETWORKING} = "yes" ]; then
- if [ -r /lib/modules/`uname -r`/ipv6/ipv6.o ]; then
- /sbin/modprobe net-pf-10
- fi
+if [ "${IP6NETWORKING}" = "yes" ]; then
+ if [ -r /lib/modules/`uname -r`/ipv6/ipv6.o ]; then
+ /sbin/modprobe net-pf-10
+ fi
fi
# Even if IPX is configured, without the utilities we can't do much
else
if [ "$FORWARD_IPV4" = "no" -o "$FORWARD_IPV4" = "false" ]; then
value=0
- message="Disabling IPv4 packet forwarding."
+ message="Disabling IPv4 packet forwarding: "
else
value=1
- message="Enabling IPv4 packet forwarding."
+ message="Enabling IPv4 packet forwarding :"
fi
if [ $value != `cat /proc/sys/net/ipv4/ip_forward` ]; then
show $message
busy
echo "$value" > /proc/sys/net/ipv4/ip_forward
- deltext
- ok
+ deltext; ok
fi
fi
fi
}
-ipv4_spoof_protection ()
-{
-# This is the best method: turn on Source Address Verification and get
-# spoof protection on all current and future interfaces.
-if [ -e /proc/sys/net/ipv4/conf/all/rp_filter ]; then
- show Setting up IP spoofing protection
- busy
- for f in /proc/sys/net/ipv4/conf/*/rp_filter; do
- echo 1 > $f
- done
- deltext
- ok
- else
- deltext
- fail
- echo "PROBLEMS SETTING UP IP SPOOFING PROTECTION. BE WORRIED!"
-fi
+ipv4_spoofing_protection ()
+ {
+ if [ -d /proc/sys/net/ipv4 ]; then
+ # people could have left this out of their kernel, which isn't
+ # exactly an error
+ if [ ! -f /proc/sys/net/ipv4/conf/all/rp_filter ] ; then
+ echo "/proc/sys/net/ipv4/conf/all/rp_filter is missing --" \
+ "cannot control IP spoofing protection" >&2
+ else
+ if [ "$SPOOFING_IPV4" = "no" -o "$SPOOFING_IPV4" = "false" ]; then
+ value=0
+ message="Disabling IPv4 spoofing protection: "
+ else
+ value=1
+ message="Enabling IPv4 spoofing protection: "
+ fi
+
+ if [ $value != `cat /proc/sys/net/ipv4/conf/all/rp_filter` ]; then
+ show $message
+ busy
+ for f in /proc/sys/net/ipv4/conf/*/rp_filter; do
+ echo $value > $f
+ done
+ deltext
+ ok
+ fi
+ fi
+ fi
}
+ipv4_icmp_echo_ignore_broadcasts ()
+{
+ if [ -d /proc/sys/net/ipv4 ]; then
+ # people could have left this out of their kernel, which isn't
+ # exactly an error
+ if [ ! -f /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts ] ; then
+ echo "/proc/sys/net/ipv4/icmp_echo_ignore_broadcasts is missing --" \
+ "cannot control IP ignoring icmp to broadcasts" >&2
+ else
+ if [ "$IGNORE_ICMP_BCAST_IPV4" = "no" -o "$IGNORE_ICMP_BCAST_IPV4" = "false" ]; then
+ value=0
+ message="Disabling IPv4 ign icmp_echo to our bcasts: "
+ else
+ value=1
+ message="Enabling IPv4 ign icmp_echo to our bcasts: "
+ fi
+
+ if [ $value != `cat /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts` ]; then
+ show $message
+ busy
+ echo "$value" > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
+ deltext
+ ok
+ fi
+ fi
+ fi
+ }
+
# See how we were called.
case "$1" in
start)
ipv4_forward_set
+ ipv4_icmp_echo_ignore_broadcasts
./ifup ifcfg-lo
./ifup $i boot
done
- ipv4_spoof_protection
+ ipv4_spoofing_protection
touch /var/lock/subsys/network
;;
stop)
+ SPOOFING_IPV4=no
+ ipv4_spoofing_protection
+
for i in $interfaces; do
./ifdown $i boot
done
;;
esac
./ifdown ifcfg-lo
- echo "Disabling IPv4 packet forwarding."
+ show "Disabling IPv4 packet forwarding: "
+ busy
echo 0 > /proc/sys/net/ipv4/ip_forward
+ deltext; ok
+
+ IGNORE_ICMP_BCAST_IPV4=no
+ ipv4_icmp_echo_ignore_broadcasts
+
rm -f /var/lock/subsys/network
;;
status)
echo "Configured devices:"
echo lo $interfaces
- if [ -x /bin/linuxconf ] ; then
- eval `/bin/linuxconf --hint netdev`
- echo "Devices that are down:"
- echo $DEV_UP
- echo "Devices with modified configuration:"
- echo $DEV_RECONF
- else
- echo "Currently active devices:"
- echo `/sbin/ifconfig | grep ^[a-z] | awk '{print $1}'`
- fi
+ echo "Currently active devices:"
+ echo `/sbin/ifconfig | grep ^[a-z] | awk '{print $1}'`
;;
restart)
$0 stop
$0 start
;;
- reload)
- if [ -x /bin/linuxconf ] ; then
- eval `/bin/linuxconf --hint netdev`
- if [ "$RECONF_IPV4ROUTING" = "yes" ] ; then
- ipv4_forward_set
- fi
- for device in $DEV_UP ; do
- ./ifup $device
- done
- for device in $DEV_DOWN ; do
- ./ifdown $device
- done
- for device in $DEV_RECONF ; do
- ./ifdown $device
- ./ifup $device
- done
- for device in $DEV_RECONF_ALIASES ; do
- /etc/sysconfig/network-scripts/ifup-aliases $device
- done
- for device in $DEV_RECONF_ROUTES ; do
- /etc/sysconfig/network-scripts/ifup-routes $device
- done
- case $IPX in yes|true)
- case $IPXINTERNALNET in
- reconf)
- /usr/bin/ipx_internal_net del
- /usr/bin/ipx_internal_net add $IPXINTERNALNETNUM \
- $IPXINTERNALNODENUM
- ;;
- add)
- /usr/bin/ipx_internal_net add $IPXINTERNALNETNUM \
- $IPXINTERNALNODENUM
- ;;
- del)
- /usr/bin/ipx_internal_net del
- ;;
- esac
- ;;
- esac
- else
- $0 restart
- fi
- ;;
- probe)
- if [ -x /bin/linuxconf ] ; then
- eval `/bin/linuxconf --hint netdev`
- [ -n "$DEV_UP$DEV_DOWN$DEV_RECONF$DEV_RECONF_ALIASES" -o \
- -n "$DEV_RECONF_ROUTES$IPXINTERNALNET" -o \
- "$RECONF_IPV4ROUTING" = yes ] && \
- echo reload
- exit 0
- else
- # if linuxconf isn't around to figure stuff out for us,
- # we punt. Probably better than completely reloading
- # networking if user isn't sure which to do. If user
- # is sure, they would run restart or reload, not probe.
- exit 0
- fi
- ;;
*)
- echo "Usage: network {start|stop|restart|reload|status|probe}"
+ echo "Usage: network {start|stop|restart|status}"
exit 1
esac
--- /dev/null
+#!/bin/sh
+#
+# /etc/rc.d/init.d/network-ip6.init
+#
+# based on
+## network Bring up/down networking
+##
+## Modified: Ngo Than
+## Date: 07.04.1998
+######################################################################
+## Modified: Erik Heim <erik@seitz.de>
+## Date : 19.3.98
+## Reason : for startup
+#####################################################################
+
+# and based on my several add-on scripts for IPv6
+#
+# IPv6 network configuration
+#
+# Copyright 1997-1998 Peter Bieringer <pb@bieringer.de>
+#
+# Version 2.01 23.07.1998
+#
+# Changes to
+# 2.00: Merging of single scripts into one
+# 2.01: Updates for dual usage (DLD 5.4 or another RedHat compatible system)
+
+subsys_parameter=$1
+LOCKDIR=/var/lock/subsys
+##################################################################
+start_and_stop() {
+ # Source function library.
+ [ ! -f /etc/rc.d/init.d/functions ] && exit 1
+ . /etc/rc.d/init.d/functions
+ # If some used functions were not defined until now...
+ # At the moment, only Delix DLD 5.4 supports them directly
+
+ if ! print_message >/dev/null 2>&1; then
+ print_message () {
+ $0 ${subsys_parameter}_msg
+ }
+ fi
+ if ! check_lock >/dev/null 2>&1; then
+ check_lock() {
+ local LOCK_FAIL
+ if [ $# = 0 ]; then
+ echo "check_lock Lockfile start|stop"
+ return 2
+ fi
+ LOCK_FAIL=0
+ if [ -f "$1" -a "$2" = "stop" ]; then LOCK_FAIL=1 ; fi
+ if [ ! -f "$1" -a "$2" = "start" ]; then LOCK_FAIL=1 ; fi
+ echo
+ return $LOCK_FAIL
+ }
+ fi
+
+ if ! logexec >/dev/null 2>&1; then
+ logexec() {
+ $*
+ }
+ fi
+
+ ## End of defines
+
+ [ ! -f /etc/sysconfig/network ] && exit 1
+ . /etc/sysconfig/network
+ # Source PCMCIA
+ if [ -f /etc/sysconfig/pcmcia ]; then
+ . /etc/sysconfig/pcmcia
+ fi
+ # Check that networking is up.
+ [ "$NETWORKING" = "yes" ] || exit 2
+ [ -x /sbin/ifconfig ] || exit 1
+ [ ! -d /etc/sysconfig/network-scripts ] && exit 1
+
+ print_message
+
+ check_lock $LOCKDIR/network-ip6 "$subsys_parameter"
+ if [ "$?" = 0 ]; then exit 0 ; fi
+
+
+ [ ! -f /etc/rc.d/init.d/functions-ip6 ] && exit 1
+ . /etc/rc.d/init.d/functions-ip6
+
+ test-ip6 || exit
+
+ cd /etc/sysconfig/network-scripts
+ interfaces=`/bin/ls ifcfg* | egrep -v '(ifcfg-lo|:)' | egrep 'ifcfg-[a-z0-9]+$'`
+}
+
+##################################################################
+# See how we were called.
+##################################################################
+case "$subsys_parameter" in
+ start_msg)
+ echo -n "Start IPv6-Networkinterface(s)-Configuration."
+ ;;
+ stop_msg)
+ echo -n "Stop IPv6-Networkinterface(s)-Configuration."
+ ;;
+ start)
+ start_and_stop
+ for i in $interfaces; do
+ REALDEVICE=`echo $i | sed 's/ifcfg-//g'`
+ logexec ifup-ip6 $REALDEVICE
+ logexec ifup-routes-ip6 $REALDEVICE
+ done
+
+ logexec touch $LOCKDIR/network-ip6.init
+
+ exit $FAIL
+ ;;
+ stop)
+ start_and_stop
+ for i in $interfaces; do
+ REALDEVICE=`echo $i | sed 's/ifcfg-//g'`
+ logexec ifdown-routes-ip6 $REALDEVICE
+ logexec ifdown-ip6 $REALDEVICE
+ done
+
+ logexec rm -f $LOCKDIR/network-ip6.init
+ exit $FAIL
+ ;;
+ restart)
+ $0 stop
+ $0 start
+ exit $?
+ ;;
+ *)
+ echo "Usage: network-ip6 {start|stop|restart|start_msg|stop_msg}"
+ exit 1
+ ;;
+esac
+
+exit 0
+
. /etc/sysconfig/network
# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
+[ "${NETWORKING}" = "no" ] && exit 0
case `uname -r` in
0.*|1.*|2.0.*)
-#!/bin/bash
+#!/bin/sh
#
# random Script to snapshot random state and reload it at boot time.
#
# Author: Theodore Ts'o <tytso@mit.edu>
#
-# chkconfig: 2345 20 80
+# chkconfig: 12345 20 80
# description: Saves and restores system entropy pool for higher quality \
# random number generation.
--- /dev/null
+#!/bin/sh
+#
+# reboot Script for system halt/reboot.
+#
+# chkconfig: 6 00 00
+# description: This file is executed by init when it goes into runlevel \
+# runlevel 6 (reboot). It calls common code for halt/reboot \
+# from shutdwn which kills all processes, unmounts file \
+# systems and then either halts or reboots.
+#
+# Author: Grzegorz Stanislawski <stangrze@open.net.pl>
+#
+
+# See how we were called.
+case "$1" in
+ stop*)
+ exit 0
+ ;;
+ start*)
+ . /etc/rc.d/init.d/shutdwn
+ echo "Please stand by while rebooting the system..."
+ [ -f /fastboot ] && echo "On the next boot fsck will be skipped."
+ eval reboot -d
+ ;;
+esac
--- /dev/null
+#!/bin/sh
+#
+# shutdwn Common script for system halt/reboot.
+#
+# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+# Modified for PLD Linux by Grzegorz Stanislawski
+#
+
+# Set the path.
+PATH=/sbin:/bin:/usr/bin:/usr/sbin
+
+# Kill all processes.
+[ "${BASH+bash}" = bash ] && enable kill
+
+echo "Sending all processes the TERM signal..."
+kill -15 -1
+sleep 5
+echo "Sending all processes the KILL signal.."
+kill -9 -1
+
+# Write to wtmp file before unmounting /var
+halt -w
+
+# Turn off swap, then unmount file systems.
+echo "Turning off swap and accounting"
+swapoff -a
+[ -x /sbin/accton ] && /sbin/accton
+echo "Unmounting file systems"
+umount -a
+mount -n -o remount,ro /
+
+# turn off raid
+if [ -x /sbin/raidstop -a -f /etc/raidtab ]; then
+ /sbin/raidstop -a
+fi
+
+echo "Remounting remaining filesystems (if any) readonly"
+mount | awk '/ext2/ { print $3 }' | while read line; do
+ mount -n -o ro,remount $line
+done
-#!/bin/bash
+#!/bin/sh
#
+# single Script for sedding up administrative/rescue shell.
#
-# rc.single This file is executed by init when it goes into runlevel
-# 1, which is the administrative state. It kills all
-# deamons and then puts the system into single user mode.
-# Note that the file systems are kept mounted.
+# chkconfig: 1 00 00
+# description: This file is executed by init when it goes into runlevel \
+# 1, which is the administrative state. It kills all \
+# deamons and then puts the system into single user mode. \
+# Note that the file systems are kept mounted. \
#
# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-# Modified for RHS Linux by Damien Neil
+# Modified for PLD Linux by Grzegorz Stanislawski
#
# Set the path.
PATH=/sbin:/bin:/usr/sbin:/usr/bin
+case "$1" in
+ stop*)
+ exit 0
+ ;;
+ start*)
# Kill all processes.
-[ "${BASH+bash}" = bash ] && enable kill
+ [ "${BASH+bash}" = bash ] && enable kill
-echo "Sending all processes the TERM signal..."
-kill -15 -1
-sleep 5
-echo "Sending all processes the KILL signal.."
-kill -9 -1
+ echo "Sending all processes the TERM signal..."
+ kill -15 -1
+ sleep 5
+ echo "Sending all processes the KILL signal.."
+ kill -9 -1
-rm -f /var/lock/subsys/*
+ rm -f /var/lock/subsys/*
-# this looks nices
-[ -x /usr/bin/clear ] && /usr/bin/clear
+ # this looks nices
+ [ -x /usr/bin/clear ] && /usr/bin/clear
-# Now go to the single user level.
-echo "Telling INIT to go to single user mode."
-exec init -t1 S
+ ## we just killed kerneld :-(
+ #/etc/rc.d/init.d/kerneld start
+
+ # Now go to the single user level.
+ echo "Telling INIT to go to single user mode."
+ exec init -t1 S
+ ;;
+esac
--- /dev/null
+#!/bin/sh
+#
+# /etc/rc.d/init.d/tunnels-ip6.init
+#
+# based on
+## network Bring up/down networking
+##
+## Modified: Ngo Than
+## Date: 07.04.1998
+######################################################################
+## Modified: Erik Heim <erik@seitz.de>
+## Date : 19.3.98
+## Reason : for startup
+#####################################################################
+
+# and based on my
+# /etc/rc.d/init.d/tunnels-ip6.init
+# Version 1.03
+#
+# Starts and stops the IPv6 over IPv4 tunnels
+#
+# Copyright 1997-1998 Peter Bieringer <pb@bieringer.de>
+#
+# Version 1.12 07.08.1998
+#
+# Changes to
+# 1.10: Merge into DLD 5.4
+# 1.11: Updates for dual usage (DLD 5.4 or another RedHat compatible system)
+# 1.12: Bugfix, don't used the switch from network-ip6
+
+subsys_parameter=$1
+LOCKDIR=/var/lock/subsys
+##################################################################
+start_and_stop() {
+ # Source function library.
+ [ ! -f /etc/rc.d/init.d/functions ] && exit 1
+ . /etc/rc.d/init.d/functions
+
+ # If some used functions were not defined until now...
+ # At the moment, only Delix DLD 5.4 supports them directly
+
+ if ! print_message >/dev/null 2>&1; then
+ print_message () {
+ $0 ${subsys_parameter}_msg
+ }
+ fi
+
+ if ! check_lock >/dev/null 2>&1; then
+ check_lock() {
+ local LOCK_FAIL
+ if [ $# = 0 ]; then
+ echo "check_lock Lockfile start|stop"
+ return 2
+ fi
+ LOCK_FAIL=0
+ if [ -f "$1" -a "$2" = "stop" ]; then LOCK_FAIL=1 ; fi
+ if [ ! -f "$1" -a "$2" = "start" ]; then LOCK_FAIL=1 ; fi
+ echo
+ return $LOCK_FAIL
+ }
+ fi
+
+ if ! logexec >/dev/null 2>&1; then
+ logexec() {
+ $*
+ }
+ fi
+
+ # End of defines
+
+ [ ! -f /etc/sysconfig/network ] && exit 1
+ . /etc/sysconfig/network
+ # Check that networking is up.
+ [ "$NETWORKING" = "yes" ] || exit 2
+
+ [ -x /sbin/ifconfig ] || exit 1
+ print_message
+
+ check_lock $LOCKDIR/tunnels-ip6.init "$subsys_parameter"
+ if [ "$?" = 0 ]; then exit 0 ; fi
+
+
+ [ ! -f /etc/rc.d/init.d/functions-ip6 ] && exit 1
+ . /etc/rc.d/init.d/functions-ip6
+
+ test-ip6 || exit
+
+ [ "$IP6TUNNELCONFIG" = "yes" ] || exit 2
+}
+
+##################################################################
+# See how we were called.
+##################################################################
+case "$subsys_parameter" in
+ start_msg)
+ echo -n "Start IPv6-over-IPv4-Tunnel(s)."
+ ;;
+ stop_msg)
+ echo -n "Stop IPv6-over-IPv4-Tunnel(s)."
+ ;;
+ start)
+ start_and_stop
+
+ logexec tunnels-up-ip6
+
+ logexec touch $LOCKDIR/tunnels-ip6.init
+
+ exit $FAIL
+ ;;
+ stop)
+ start_and_stop
+
+ logexec tunnels-down-ip6
+
+ logexec rm -f $LOCKDIR/tunnels-ip6.init
+
+ exit $FAIL
+ ;;
+ restart)
+ $0 stop
+ $0 start
+ exit $?
+ ;;
+ *)
+ echo "Usage: tunnels-ip6.init {start|stop|restart|start_msg|stop_msg}"
+ exit 1
+ ;;
+esac
+
+exit 0
+
-#!/bin/bash
+#!/bin/sh
#
# rc This file is responsible for starting/stopping
# services when the runlevel changes. It is also
# Check if the script is there.
[ ! -f $i ] && continue
+ # Don't run [KS]??foo.{rpmsave,rpmorig} scripts
+ [ "${1%.rpmsave}" != "${1}" ] && continue
+ [ "${1%.rpmorig}" != "${1}" ] && continue
+
# Check if the subsystem is already up.
subsys=${i#/etc/rc.d/rc$runlevel.d/K??}
[ ! -f /var/lock/subsys/$subsys ] && \
# Check if the script is there.
[ ! -f $i ] && continue
+ # Don't run [KS]??foo.{rpmsave,rpmorig} scripts
+ [ "${1%.rpmsave}" != "${1}" ] && continue
+ [ "${1%.rpmorig}" != "${1}" ] && continue
+
# Check if the subsystem is already up.
subsys=${i#/etc/rc.d/rc$runlevel.d/S??}
[ -f /var/lock/subsys/$subsys ] || \
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
-arch=$(uname -m)
-a="a"
-case "_$arch" in
- _a*) a="an";;
- _i*) a="an";;
-esac
-
+#!/bin/sh
#
# Setting serial ports. This will work only if you have setserial package installed.
#
-# Format of /etc/serial.conf:
+# Format of /etc/sysconfig/serial:
#/dev/ttyS0 uart 16450 port 0x3F8 irq 4
#/dev/ttyS1 uart 16450 port 0x2F8 irq 3
#/dev/ttyS2 uart 16450 port 0x3E8 irq 4
[ -f $SETSERIAL ] || exit 0
-ALLDEVS="/dev/ttyS?"
-if /bin/ls /dev/ttyS?? >& /dev/null ; then
- ALLDEVS="$ALLDEVS /dev/ttyS??"
-fi
+ALLDEVS="/dev/ttyS*"
echo "Setting serial ports:"
-if test -f /etc/serial.conf ; then
- grep -v ^# < /etc/serial.conf | grep "/dev/" | while read device args
+if test -f /etc/sysconfig/serial ; then
+ grep -v ^# < /etc/sysconfig/serial | grep "/dev/" | while read device args
do
${SETSERIAL} -z $device $args
done
-#!/bin/bash
+#!/bin/sh
#
# /etc/rc.d/rc.sysinit - run once at boot time
#
echo "*** Dropping you to a shell; the system will reboot"
echo "*** when you leave the shell."
- PS1="(Repair filesystem) #"; export PS1
+ PS1="(Repair filesystem) \#"; export PS1
sulogin
echo "Unmounting file systems"
echo "Remounting root filesystem in read-write mode."
mount -n -o remount,rw /
-if [ ! -f /etc/HOSTNAME ]; then
- echo ${HOSTNAME} > /etc/HOSTNAME
-fi
-
# Clear mtab
>/etc/mtab
USEMODULES=
fi
-# Get the modules ready to go -- we use awk here as cut is in /usr/bin
+# Set up kernel version-dependent symlinks.
rm -f /lib/modules/preferred
-if [ -n $USEMODULES ]; then
- set `cat /proc/cmdline`
- while [ $# -gt 0 ]; do
- if echo $1 | grep '^BOOT_IMAGE=' > /dev/null ; then
- image=`echo $1 | awk -F= '{ print $2 }'`
- kernelfile=`/sbin/lilo -I $image`
- if [ -n "$kernelfile" ]; then
- kernelname=`echo $kernelfile | awk -F- '{ print $1 }'`
- versioninfo=`echo $kernelfile | sed "s|${kernelname}-||"`
- if [ "$kernelname" = "/boot/vmlinuz" -a \
- -d /lib/modules/$versioninfo -a \
- $versioninfo != `uname -r` ]; then
- ln -sf $versioninfo /lib/modules/preferred
- fi
- fi
- fi
- shift
- done
+if [ -n "$USEMODULES" ]; then
+ ktag="`cat /proc/version`"
+ mtag=`grep -l "$ktag" /lib/modules/*/.rhkmvtag` 2> /dev/null
+ if [ -n "$mtag" ]; then
+ mver=`echo $mtag | sed -e 's,/lib/modules/,,' -e 's,/.rhkmvtag,,' -e 's,[ ].*$,,'`
+ ln -sf /lib/modules/$mver /lib/modules/preferred
+ ln -sf /boot/System.map-$mver /boot/System.map
+ ln -sf /boot/module-info-$mver /boot/module-info
+ fi
fi
if [ -x /sbin/depmod -a -n "$USEMODULES" ]; then
fi
fi
-if [ -x /sbin/kerneld -a -n "$USEMODULES" ]; then
- if [ -f /proc/sys/kernel/modprobe ]; then
+if [ -f /proc/sys/kernel/modprobe ]; then
# /proc/sys/kernel/modprobe indicates built-in kmod instead
echo "/sbin/modprobe" > /proc/sys/kernel/modprobe
- else
- /sbin/kerneld
- KERNELD=yes
- fi
+fi
+
+# Add raid devices
+if [ -f /proc/mdstat -a -f /etc/raidtab -a -x /sbin/raidadd ]; then
+ echo "Starting up RAID devices."
+ raidadd -a
+
+ rc=$?
+
+ if [ $rc = 0 ]; then
+ raidrun -a
+ rc=$?
+ fi
+
+ # A non-zero return means there were problems.
+ if [ $rc -gt 0 ]; then
+ echo
+ echo
+ echo "*** An error occurred during the RAID startup"
+ echo "*** Dropping you to a shell; the system will reboot"
+ echo "*** when you leave the shell."
+
+ PS1="(RAID Repair) \#"; export PS1
+ sulogin
+
+ echo "Unmounting file systems"
+ umount -a
+ mount -n -o remount,ro /
+ echo "Automatic reboot in progress."
+ reboot
+ fi
fi
# Check filesystems
echo "Checking filesystems."
fsck -R -A -V -a $fsckoptions
+ rc=$?
+
# A return of 2 or higher means there were serious problems.
- if [ $? -gt 1 ]; then
+ if [ $rc -gt 1 ]; then
echo
echo
echo "*** An error occurred during the file system check."
echo "*** Dropping you to a shell; the system will reboot"
echo "*** when you leave the shell."
- PS1="(Repair filesystem) #"; export PS1
+ PS1="(Repair filesystem) \#"; export PS1
sulogin
echo "Unmounting file systems"
# Delete stale subsystem files.
rm -f /var/lock/subsys/*
-if [ -n "$KERNELD" ]; then
- touch /var/lock/subsys/kerneld
-fi
-
# Delete stale pid files
rm -f /var/run/*.pid
rm -f /var/spool/postoffice/.pid.*
# Delete X locks
rm -f /tmp/.X*-lock
+# Delete Postgres sockets
+rm -f /tmp/.s.PGSQL.*
+
# Set the system clock.
echo -n "Setting clock"
CLOCK=/sbin/clock
fi
-if [ $UTC = "true" ]; then
+case "$UTC" in
+ yes|true)
CLOCKFLAGS="$CLOCKFLAGS -u";
echo -n " (utc)"
-fi
-if [ $ARC = "true" ]; then
+ ;;
+esac
+
+case "$ARC" in
+ yes|true)
CLOCKFLAGS="$CLOCKFLAGS -A";
echo -n " (arc)"
-fi
+ ;;
+esac
+
echo -n ": "
$CLOCK $CLOCKFLAGS
# Now that we have all of our basic modules loaded and the kernel going,
# let's dump the syslog ring somewhere so we can find it later
dmesg > /var/log/dmesg
+chmod 640 /var/log/dmesg
# Feed entropy into the entropy pool
/etc/rc.d/init.d/random start
rm -f $(PROGS)
install:
- install -d $(ROOT)/bin $(ROOT)/usr/sbin $(ROOT)/usr/man/man1
- install -s doexec $(ROOT)/bin/doexec
- install -s usleep $(ROOT)/bin/usleep
- install -s usernetctl $(ROOT)/usr/sbin/usernetctl
- install -s netreport $(ROOT)/sbin/netreport
- install -s ipcalc $(ROOT)/bin/ipcalc
- install doexec.1 $(ROOT)/usr/man/man1
- install netreport.1 $(ROOT)/usr/man/man1
- install usleep.1 $(ROOT)/usr/man/man1
- install usernetctl.1 $(ROOT)/usr/man/man1
- install ipcalc.1 $(ROOT)/usr/man/man1
+ mkdir -p $(ROOT)/bin $(ROOT)/usr/sbin $(ROOT)/usr/man/man1
+ install -o 0 -g 0 -s -m 755 doexec $(ROOT)/bin/doexec
+ install -o 0 -g 0 -s -m 755 usleep $(ROOT)/bin/usleep
+ install -o 0 -g 0 -s -m 4755 usernetctl $(ROOT)/usr/sbin/usernetctl
+ install -o 0 -g 0 -s -m 2755 netreport $(ROOT)/sbin/netreport
+ install -o 0 -g 0 -s -m 755 ipcalc $(ROOT)/bin/ipcalc
+ install -m 644 doexec.1 $(ROOT)/usr/man/man1
+ install -m 644 netreport.1 $(ROOT)/usr/man/man1
+ install -m 644 usleep.1 $(ROOT)/usr/man/man1
+ install -m 644 usernetctl.1 $(ROOT)/usr/man/man1
+ install -m 644 ipcalc.1 $(ROOT)/usr/man/man1
# this daemon and initscript are useful for testing the up/down/status stuff
# not installed by default, only comes from sources.
install-test:
- install -s testd $(ROOT)/usr/sbin/testd
- install testdinit $(ROOT)/etc/rc.d/init.d/testd
+ install -o 0 -g 0 -s -m 755 testd $(ROOT)/usr/sbin/testd
+ install -o 0 -g 0 -m 755 testdinit $(ROOT)/etc/rc.d/init.d/testd
ipcalc: ipcalc.o
$(CC) $(LDFLAGS) -o $@ $< -lpopt
chptr = contents;
while (*chptr != '\n') chptr++;
end = chptr + 1;
- while (chptr > contents && isspace(*chptr)) chptr--;
+ while (chptr >= contents && isspace(*chptr)) chptr--;
*(++chptr) = '\0';
if (!strncmp(contents, "USERCTL=", 8)) {
- if (!strcmp(contents+8, "yes")) return FOUND_TRUE;
- else return FOUND_FALSE;
+ contents += 8;
+ if (contents[0] == '"' &&
+ contents[strlen(contents) - 1] == '"') {
+ contents++;
+ contents[strlen(contents) - 1] = '\0';
+ }
+
+ if (!strcmp(contents, "yes") || !strcmp(contents, "true"))
+ return FOUND_TRUE;
+ else
+ return FOUND_FALSE;
}
contents = end;
FORWARD_IPV4 is not set at all, forwarding is *enabled*
for compatibility with the configuration files used on
Red Hat Linux versions 4.2 and earlier.)
+ IGNORE_ICMP_BCAST_IPV4=yes|no (Please note that if you accept ICMP echo
+ requests with a broadcast/multicast destination address your network
+ may be used as an exploder for denial of service packet flooding attacks
+ to other hosts.
+ SPOOFING_IPV4=yes|no (anti spoofing protection)
GATEWAY=<gateway IP>
GATEWAYDEV=<gateway device> (e.g. eth0)
NISDOMAIN=<nis domain name>
BACKUPTAB=/etc/backuptab
The file in which we keep our list of backup(s) we want to make.
+/etc/sysconfig/sendmail:
+ DAEMON=yes|no
+ yes implies -bd
+ QUEUE=1h
+ given to sendmail as -q$QUEUE
+ -q option is not given to sendmail if /etc/sysconfig/sendmail
+ exists and QUEUE is empty or undefined.
Files in /etc/sysconfig/network-scripts/
RETRYTIMEOUT=<number of seconds, default currently 60>
(time to wait before re-attempting to establish a connection
after a previous attempt fails.)
+ INITSCRIPT=<modem command>
+ string which initialises your modem. Usualy something like
+ AT&F0&C1&D2
+ (PLD rc-scripts specific option)
+ DATAFORCHAT=<list of variables>
+ List of variables which should be exported to chat script.
+ Used mostly for passing USERNAME and PASSWORD into it. (see below)
+ (PLD rc-scripts specific option)
+ <anything>=<anything>
+ Variable name and it's value for use by chat script.
+ Note: You don't have to define variables here, if they are defined
+ in parent process enviroment they will be used.
+ in.ex. USERNAME usualy is.
/etc/sysconfig/network-scripts/chat-<interface-name>:
the connection. For SLIP devices, a DIP script is written
from the chat script; for PPP devices, the chat script is used
directly.
-
+ In PLD version of rc-scripts, this file is parsed by shell
+ (actually by grep in firstplace to get rid of comments) before it
+ is passed to chat.
+ This allows you to substitute shell variables with their values
+ defined in ifcfg-<interface name> or more generally in current env.
+ If You wonder about purbose, imagine one chat-script for all links
+ at ISP's border router or computer in home where all users have own IPS's
+ accounts and want to pay only for themselfes.
+ Unfortunetly this parsing have impact on chat script syntax.
+ All characters that have special meaning for shell have to be escaped.
+
+
/etc/sysconfig/network-scripts/dip-<interface-name>
A write-only script created from the chat script by netcfg.
/etc/sysconfig/i18n
LANG= can be any two letter ISO language code
+ LC_ALL= is the setting of the localedata configuration (eg fr_CA)
LINGUAS= can be a : separated list of language codes
SYSTERM= use to set default TERM environment variable
The above three variables are used in rc.sysinit.
- SYSFONT= any font with is legal input to the 'setfont' command (see
- kbd package)
+ SYSFONT= any font that is legal when used as
+ /usr/sbin/setfont $SYSFONT ...
+ (See kbd package for sysfont command)
+
+ UNIMAP= any unicode font that is legal fodder for
+ /usr/sbin/setfont $SYSFONT-u $UNIMAP
The above is used by the /sbin/setsysfont command (which is run
by rc.sysinit at boot time).
-##### ONLY IN POLISH (someone wants translate it to english ?) ###########
-
-/etc/sysconfig/bridge (musisz zainstalowaæ pakiet bridgex)
-
- INTERFACES= lista interfejsów dla których w³±czamy bridging np.
- INTERFACES="eth0 eth1"
-
- bridgingon() {
- tu umie¶æ komendy startuj±ce bridging dla odpowiednich
- protoko³ów itd.
- }
-
-/etc/sysconfig/console
-
- CONSOLEFONT= font który za³adowaæ
- CONSOLEMAP= Application-charset map (u¿ywana w trybie != Unicode)
- KEYTABLE= tablica klawiatury
-
#!D:IPv6 network configuration file
#
#!C:Copyright 1997-1998 Peter Bieringer <pb@bieringer.de>
+#!C:changes (versions X.XXa) by Grzegorz Stanislawski <stangrze@open.net.pl>
#
-#!V:Version 1.11 05.03.1998
-
-# Changes from:
-# 1.00: nothing important
-# 1.10: add IP6FORWARDING switch (to differ between a host and a router)
+#!V:Version 1.11a 10.11.1998
+# Changes to:
+# 1.11: add IP6FORWARDING switch (to differ between a host and a router)
+# 1.11a: removed support for radvd
## IPv6 configuration debugging
# Bit0: show all commands, bit1:don't execute anything
IP6DEBUG=0
## IPv6 network configuration? {yes|no}
-#IP6NETWORKING=yes
-IP6NETWORKING=no
+IP6NETWORKING=yes
+#IP6NETWORKING=no
# Take information from the file
IP6INTERFACEFILE=/etc/sysconfig/network-ip6.conf
# similar to the default gateway in IPv4)
# Allow gateway configurations {yes|no}
-#IP6GATEWAYCONFIG=yes
-IP6GATEWAYCONFIG=no
+IP6GATEWAYCONFIG=yes
+#IP6GATEWAYCONFIG=no
# Take information from the file
IP6ROUTEFILE=/etc/sysconfig/network-ip6.conf
# Allow forwarding option, host is a router {yes|no}
-#IP6FORWARDING=yes
-IP6FORWARDING=no
+IP6FORWARDING=yes
+#IP6FORWARDING=no
## IPv6 tunnels
# tunnel to you
# Allow IPv6 tunnel interface configuration {yes|no}
-#IP6TUNNELCONFIG=yes
-IP6TUNNELCONFIG=no
+IP6TUNNELCONFIG=yes
+#IP6TUNNELCONFIG=no
# Take information from the file
-IP6TUNNELFILE=/etc/sysconfig/network-ip6.conf
-
-
-
-## Router Advertisement Daemon
-# Start Daemon {yes|no}
-#IP6RADVD=yes
-IP6RADVD=no
-
-# Sepcify configuration file
-IP6RADVDFILE="/etc/sysconfig/radvd.conf"
-
-# Specify options
-#IP6RADVDOPTIONS="-d 9"
+IP6TUNNELFILE=/etc/sysconfig/tunnels-ip6.conf
#
#!P:/etc/sysconfig
#
+#!S:root:root 440
+#
#!D:IPv6 configuration file
#
#!C:Copyright 1997-1998 Peter Bieringer <pb@bieringer.de>
+#!C:changes (versions X.XXa) by Grzegorz Stanislawski <stangrze@open.net.pl>
#
-#!V:Version 2.11 05.01.1998
-
-# Changes from 2.10: nothing important
+#!V:Version 2.12a 10.11.1998
+# Changes to
+# 2.11: nothing important
+# 2.12: NBMA tunnel configuration ready
+# 2.12a:
+# - tunnel section moved out to tunnels-ip6.conf
+# - Use of iproute2 program in functions-ip6 script allows "verbose"
+# interface names in kernel iface table and this file
+# -
# This file is needed by 'functions-ip6' version 2.xx
### necessary. The important values are 'device' and 'key'!
-################# Tunnel section
-
-## Here you can configure tunnel endpoints. Be sure, that you set the device
-## entry in a right way like 'sit1', 'sit2' and so on, otherwise you will get
-## an error information from 'functions-ip6'
-
-#Device Key IPv4 gateway address
-sit1 tunnel 137.193.227.41
-
-
-# Tunnel route section
-# Here you can specify several routes to your configured tunnels.
-# More than one are possible!
-
-#Device Key Network
-sit1 route 3ffe::/16
-
-
################# Interface section
## Here you can specify several addresses for your interfaces.
## More than one are possible!
#Device Key prefix suffix length
-eth0 iface fec0:0:0:1 0:0:0:1 64
-eth0 iface 3ffe:0400:0100:f101 0:0:0:1 64
-
+#eth0 iface fec0:0:0:1 0:0:0:1 64
+eth0 iface 3ffe:902:10 0:0:0:0:3 112
################# Gateway section
## More than one are possible!
#Device Key Gateway address Network
-eth0 route fec0:0:0:1:0:0:0:20 fec0:0:0:2::/64
-eth0 route 3ffe:0400:0100:f101:0:0:0:20 3ffe:0400:0100:f102::/64
+#eth0 route fec0:0:0:1:0:0:0:20 fec0:0:0:2::/64
+#eth0 route 3ffe:0400:0100:f101:0:0:0:20 3ffe:0400:0100:f102::/64
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+#
+# Script for dialing to host with 'modem level' callback serurity enabled
+# as performed by USRobotics Courier modem
+ABORT BUSY
+ABORT NO\\sDIAL
+ABORT NO\\sCARRIER
+TIMEOUT 60
+'' atz
+OK $INITSTRING
+OK atdt $PHONE
+CONNECT \\c
+\)? $CBPASSWORD
+umber $CBPHONE
+HANGUP OFF
+CLR_ABORT NO\\sCARRIER
+NO\\sCARRIER \\c
+TIMEOUT 120
+RING ATA
+ABORT NO\\sCARRIER
+CONNECT \\c
+HANGUP ON
+ogin: $USER
+assword: $PASSWORD
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+# chat script for setting up hardwired (leased) serial line.
+# refer to ifcfg-ppp0.leased1 for more info
+REPORT CONNECT
+ABORT 'NO CARRIER'
+'' \\r$INITSTRING
+OK ''
+CONNECT
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+# Script for dialing in to Public Internet Access by TPSA (0202122)
+
+ABORT BUSY
+ABORT NO\\sDIAL
+ABORT NO\\sCARRIER
+TIMEOUT 60
+'' atz
+OK $INITSTRING
+OK atdt $PHONE
+CONNECT \\c
+ame: $USER
+ord: $PASSWORD
--- /dev/null
+DEVICE=ppp0
+CHATSCRIPT=chat-ppp0.callback
+ONBOOT=no
+HARDFLOWCTL=yes
+MODEMPORT=/dev/cua1
+LINESPEED=115200
+DEBUG=yes
+PERSIST=no
+HOLDOFF=10
+#demand option not finished yet ;-(
+DEMAND=no
+#ACTIVEFILTER=
+#IDLE=
+PHONE=phone
+INITSTRING=ATe0s2=255
+#CBPASSWORD and CBPHONE is ysed (by me) in callback.
+#see included chat-ppp0 for example of
+#"modem level" callback (on USRobotics Courier)
+CBPASSWORD=cbpassword
+CBPHONE=myphone
+USER=user
+PASSWORD=password
+DATAFORCHAT="CBPASSWORD CBPHONE PHONE USER PASSWORD INITSTRING"
+
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+# config file for setting up hardwired (leased) serial line.
+# This configuration uses chats with modem, so You have to have an inteligent
+# modem (AT commands compatible).
+# But You can monitor connection speed.
+DEVICE=ppp0
+CHATSCRIPT=chat-ppp0.leased1
+ONBOOT=yes
+IPADDR=192.168.255.254
+REMIP=192.168.255.253
+NETMASK=255.255.255.252
+HARDFLOWCTL=yes
+MODEMPORT=/dev/cua1
+LINESPEED=115200
+DEBUG=no
+PERSIST=yes
+HOLDOFF=10
+#demand option not finished yet ;-(
+DEMAND=no
+#ACTIVEFILTER=
+#IDLE=
+# one end is "calling"
+INITSTRING="ATs0=0&l1"
+# while other is "receiving"
+#INITSTRING="ATs0=1&l1"
+#if your modem doesn't support AT&L1 command try with ATD on one side
+#and ATA on the other.
+DATAFORCHAT="INITSTRING"
+
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+# (c) 1999 Grzegorz Stanislawski <stangrze@open.net.pl>
+# config file for setting up hardwired (leased) serial line.
+# This config assumes "transparent" modem (in ex. goramo), null modem
+# cable or current loop.
+# Advantage is smaller logfiles and slower 'pid spinning' (no chat is
+# executed)
+# You can configure Your AT Hayes compatibile modem to transparent mode
+# using ATS0=0&L1&S5&W on master "calling" side and ATS0=1&L1&S5&W on
+# slave "reciving" side
+# Note: After commiting last &W You won't be able to talk to Your modem
+# until You reset it to factory defaults using some jumper.
+# if You don't have any jumper YOU HAVE BEEN WARNED.
+DEVICE=ppp0
+ONBOOT=yes
+IPADDR=192.168.255.254
+REMIP=192.168.255.253
+NETMASK=255.255.255.252
+HARDFLOWCTL=yes
+MODEMPORT=/dev/cua1
+LINESPEED=115200
+DEBUG=no
+PERSIST=yes
+HOLDOFF=10
+#demand option not finished yet ;-(
+DEMAND=no
+#ACTIVEFILTER=
+#IDLE=
+
+REPORTFILE=/var/log/ppp0.log
--- /dev/null
+DEVICE=ppp0
+CHATSCRIPT=chat-ppp0.tpsa
+ONBOOT=no
+HARDFLOWCTL=yes
+MODEMPORT=/dev/cua1
+LINESPEED=115200
+DEBUG=yes
+PERSIST=no
+HOLDOFF=10
+#demand option not finished yet ;-(
+DEMAND=no
+#ACTIVEFILTER=
+#IDLE=
+PHONE=0w202122
+USER=ppp
+PASSWORD=ppp
+INITSTRING=ATe0s2=255
+DATAFORCHAT="USER PASSWORD INITSTRING"
+
+REPORTFILE=/var/log/ppp0.log
-#!/bin/bash
+#!/bin/sh
PATH=/sbin:/usr/sbin:/bin:/usr/bin
cd /etc/sysconfig/network-scripts
-
. network-functions
CONFIG=$1
[ -z "$CONFIG" ] && {
+ echo "usage: ifdown <device name>" >&2
exit 1
}
[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
[ -f "$CONFIG" ] || {
+ echo "usage: ifdown <device name>" >&2
exit 1
}
fi
exit 1
fi
-# IPv6 section
-if [ -f /etc/rc.d/init.d/functions-ip6 ]; then
- . /etc/rc.d/init.d/functions-ip6
-
- ifdown-routes-ip6 ${DEVICE}
- ifdown-ip6 ${DEVICE}
-fi
ifconfig ${DEVICE} down
exec /etc/sysconfig/network-scripts/ifdown-post $CONFIG
-echo $0 $1 executed...
-#!/bin/bash
+#!/bin/sh
# This should be called whenever an interface goes down, not just when
# it is brought down explicitly.
cd /etc/sysconfig/network-scripts
+. network-functions
CONFIG=$1
-. network-functions
source_config
# Notify programs that have requested notification
PATH=/sbin:/usr/sbin:/bin:/usr/bin
cd /etc/sysconfig/network-scripts
+. network-functions
CONFIG=$1
-. network-functions
source_config
if [ ! -f /var/run/ppp-$DEVICE.dev ]; then
# pppd might have chat as a child; remember chat's pid to kill after pppd.
# (After, not before, so that pppd doesn't just restart it).
-CHATPID=`ps aul | awk '$4 ~ $PID {print $3}' 2>/dev/null`
+CHATPID=`ps axl | awk '$4 ~ $PID {print $3}' 2>/dev/null`
kill $PID > /dev/null 2>&1
[ -n "$CHATPID" ] && kill $CHATPID > /dev/null 2>&1
PATH=/sbin:/usr/sbin:/bin:/usr/bin
cd /etc/sysconfig/network-scripts
+. network-functions
CONFIG=$1
-. network-functions
source_config
# signals ifup-sl not to persist
rm -f /var/run/sl-$DEVICE.dev
PID=`pidof dip-$DEVICE`
+#
+# The proctitle for connected dip daemons is actually "-dip (ipaddr)"
+# with ipaddr == local on dial-out, remote on dial-in
+# Grab the PID of connected dial-out daemon.
+#
+if [ -z "$PID" ]; then
+ PID=`pidof -- -dip\ \($IPADDR\)`
+fi
if [ -z "$PID" ]; then
exit 1
fi
PATH=/sbin:/usr/sbin:/bin:/usr/bin
cd /etc/sysconfig/network-scripts
-
. network-functions
need_hostname
CONFIG=$1
[ -z "$CONFIG" ] && {
+ echo "usage: ifup <device name>" >&2
exit 1
}
[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
[ -f "$CONFIG" ] || {
+ echo "usage: ifup <device name>" >&2
exit 1
}
ifconfig ${DEVICE} ${MACADDR:+hw ether $MACADDR} ${IPADDR} \
netmask ${NETMASK} broadcast ${BROADCAST}
- if [ "$ISALIAS" != no ] ; then
+ if [ "$ISALIAS" = no ] ; then
+ route add -net ${NETWORK} netmask ${NETMASK} ${DEVICE}
+ else
route add -host ${IPADDR} ${DEVICE}
fi
+ # this is broken! it's only here for compatibility with old RH systems
+ if [ "${GATEWAY}" != "" -a "${GATEWAY}" != "none" ]; then
+ route add default gw ${GATEWAY} metric 1 ${DEVICE}
+ fi
+
. /etc/sysconfig/network
if [ "${GATEWAY}" != "" ]; then
if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then
# set up default gateway
- route add default gw ${GATEWAY} dev ${DEVICE}
+ route add default gw ${GATEWAY} ${DEVICE}
DEFGW=${GATEWAY}
fi
fi
if [ -n "$GATEWAYS" ]; then
for gw in $GATEWAYS; do
if [ $gw != "${DEFGW}" ]; then
- route add default gw $gw dev ${DEVICE}
+ route add default gw $gw ${DEVICE}
fi
done
fi
fi
fi
fi
-# IPv6 section
-if [ -f /etc/rc.d/init.d/functions-ip6 ]; then
- . /etc/rc.d/init.d/functions-ip6
- ifup-ip6 ${DEVICE}
- ifup-routes-ip6 ${DEVICE}
-fi
-case $CONFIG in
- eth*)
- /etc/sysconfig/network-scripts/ifup-ipx $CONFIG
- ;;
-esac
+if [ "$IPX" = yes ]; then
+ /etc/sysconfig/network-scripts/ifup-ipx $DEVICE
+fi
exec /etc/sysconfig/network-scripts/ifup-post $CONFIG
-echo $0 $1 executing...
-#!/bin/bash
+#!/bin/sh
# adds aliases of device $1
exit 1
fi
-if [ -x /bin/linuxconf ] ; then
- # ask linuxconf for lines like:
- # add <device> <ip>
- # del <device>
- # reload <number_of_aliases>
- linuxconf --hint ipalias $1 | while read verb arg1 arg2 ; do
- case $verb in
- add)
- /sbin/ifconfig $arg1 $arg2
- /sbin/route add $arg2 $arg1
- ;;
- del)
- # the <device>- 0.0.0.0 tells the kernel to remove the device
- # it is necessary to remove it in order for reload to work.
- /sbin/ifconfig ${arg1}- 0.0.0.0
- ;;
- reload)
- echo $arg1 > /proc/sys/net/core/net_alias_max
- ;;
- esac
- done
-
-else
- # we don't have linuxconf to fall back on, so presumably we do
- # not have to parse linuxconf ipalias ranges, either.
- allow_null_glob_expansion=foo
- for alias in /etc/sysconfig/network-scripts/ifcfg-$1:* ; do
- /etc/sysconfig/network-scripts/ifup $alias
- done
- unset allow_null_glob_expansion
-fi
+allow_null_glob_expansion=foo
+for alias in /etc/sysconfig/network-scripts/ifcfg-$1:* ; do
+ /etc/sysconfig/network-scripts/ifup $alias
+done
+unset allow_null_glob_expansion
case $IPX in yes|true) ;; *) exit 0 ;; esac
cd /etc/sysconfig/network-scripts
-
. network-functions
CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
source_config
for frametype in 802_2 802_3 ETHERII SNAP ; do
-#!/bin/bash
+#!/bin/sh
PATH=/sbin:/usr/sbin:/bin:/usr/bin
-CONFIG=$1
+cd /etc/sysconfig/network-scripts
. network-functions
+
+CONFIG=$1
source_config
if [ "foo$2" = "fooboot" -a "${ONBOOT}" = "no" ]
-#!/bin/bash
+#!/bin/sh
cd /etc/sysconfig/network-scripts
-
-CONFIG=$1
. network-functions
need_hostname
+CONFIG=$1
source_config
DEVICETYPE=`echo $DEVICE | sed "s/[0-9]*$//"`
-#!/bin/bash
+#!/bin/sh
# ifup-ppp script for pppd-2.3.5 (with persist & demand options) ver 0.2
# Grzegorz Stanislawski <stangrze@open.net.pl>
"/usr/sbin/pppd does not exist or is not executable for $DEVICE"
exit 1
}
+#[ -f /etc/sysconfig/network-scripts/chat-$DEVICE ] || {
+# echo "/etc/sysconfig/network-scripts/chat-$DEVICE does not exist"
+# echo "ifup-ppp for $DEVICE exiting"
+# logger -p daemon.info -t ifup-ppp \
+# "/etc/sysconfig/network-scripts/chat-$DEVICE does not exist for $DEVICE"
+# exit 1
+#}
opts="lock"
if [ "${PERSIST}" = "yes" ]; then
opts="$opts persist holdoff $HOLDOFF"
if [ -n "${REPORTFILE}" ] ; then
chatrpt="-r ${REPORTFILE}"
fi
+#CHATSCRIPT=/etc/sysconfig/network-scripts/chat-$DEVNAMR
+#[ -f $CHATSCRIPT ] || {
+# CHATSCRIPT=/etc/sysconfig/network-scripts/chat-$PARENTDEVNAME
+#}
+> /var/run/ppp-$DEVICE.dev
(logger -p daemon.info -t ifup-ppp \
"pppd started for $DEVICE on $MODEMPORT at $LINESPEED" &)&
-> /var/run/ppp-$DEVICE.dev
-
if [ -n "${CHATSCRIPT}" ] ; then
export chatdbg chatrpt CHATSCRIPT
export $DATAFORCHAT
/usr/sbin/pppd -detach $opts $MODEMPORT $LINESPEED \
- connect 'eval /usr/sbin/chat $chatdbg $chatrpt `cat ${CHATSCRIPT}`' \
+ connect 'eval /usr/sbin/chat $chatdbg $chatrpt \
+ `grep -v ^# ${CHATSCRIPT}`' \
remotename $DEVICE ipparam $DEVICE \
${PPPOPTIONS} &
else
-#!/bin/bash
+#!/bin/sh
# adds static routes which go through device $1
exit 1
fi
-if [ -x /bin/linuxconf ] ; then
- linuxconf --hint routing "$1" | while read args; do
- /sbin/route $args
- done
-else
- if [ ! -f /etc/sysconfig/static-routes ]; then
- exit 0
- fi
-
- #note the trailing space in the grep gets rid of aliases
- grep "^$1 " /etc/sysconfig/static-routes | while read device args; do
- /sbin/route add -$args $device
- done
-fi
-#!C:Changes for forwarding switch copyright 1997-1998 Peter Bieringer <pb@bieringer.de>
-#!V:Version: 1.10 18.04.1998
-#
-# Changes from:
-# 1.09: add forwarding switch for kernel versions >= 2.1.90 (idea by Dan Anderson anderson@computer.org)
-
-
-
-## Switch on forwarding in the kernel
-
-PROC_IPFORWARD="`ls /proc/sys/net/ipv4/ip_forward* 2>/dev/null`"
-
-if ! [ "$PROC_IPFORWARD" = "" ]; then
- # Forwarding exists in kernel
- if ! [ "`cat $PROC_IPFORWARD`" = "1" ]; then
- # switched off
- echo " Switch on IPv4 forwarding in the kernel"
- echo "1" >$PROC_IPFORWARD
- fi
-fi
-
-if [ -f /proc/sys/net/ipv4/conf/all/forwarding ]; then
- # for kernel >= 2.1.90
- for i in /proc/sys/net/ipv4/conf/*/forwarding; do
- if ! [ "`cat $i`" = "1" ]; then
- device=`echo $i | cut -d / -f 7`
- echo " Switch on IPv4 forwarding for device '$device' in the kernel"
- echo "1" > $i
- fi
- done
+if [ ! -f /etc/sysconfig/static-routes ]; then
+ exit 0
fi
-
-## End of switch on forwarding in the kernel
-
-
+#note the trailing space in the grep gets rid of aliases
+grep "^$1 " /etc/sysconfig/static-routes | while read device args; do
+ /sbin/route add -$args $device
+done
-#!/bin/bash
+#!/bin/sh
PATH=/sbin:/usr/sbin:/bin:/usr/bin
# ifup-post can't be done for slip :-( Solution: use PPP
fi
shift
-CONFIG=$1
+cd /etc/sysconfig/network-scripts
. network-functions
+
+CONFIG=$1
source_config
if [ "foo$2" = "fooboot" -a ${ONBOOT} = "no" ]
--- /dev/null
+MODE={ipip|gre|sit|ipxip}
+DEVICE=<device name>
+if MODE=ipxip ; then
+ ?
+else MODE=ipip || MODE=gre || MODE=sit ; then
+
+ REMOTEADDR=<IPv4 addres>
+ [ LOCALADDR=<IPv4 addres> ]
+ [ REALDEVICE=<name of physic device>
+ [ TTL= ]
+ [ TOS= ]
+ [ SEQ={no|yes} ]
+ [ ISEQ={no|yes} ]
+ [ OSEQ={no|yes} ]
+ [ KEY= ]
+ [ IKEY= ]
+ [ OKEY= ]
+ [ CSUM={no|yes} ]
+ [ ICSUM={no|yes} ]
+ [ OCSUM={no|yes} ]
+ [ NOPMTUDISC={no|yes} ]
+fi
+
--- /dev/null
+#!F:tunnels-ip6.conf
+#
+#!P:/etc/sysconfig
+#
+#!S:root:root 440
+#
+#!D:IPv6 configuration file
+#
+#!C:Copyright 1997-1998 Peter Bieringer <pb@bieringer.de>
+#!C:changes (versions X.XXa) by Grzegorz Stanislawski <stangrze@open.net.pl>
+#
+#!V:Version 2.12a 10.11.1998
+
+# Changes to
+# 2.11: nothing important
+# 2.12: NBMA tunnel configuration ready
+# 2.12a:
+# - this file contains data which was moved from network-ip6.conf
+# - Support for verbose interface names (see network-ip6.conf for info)
+# - removed nbma suppport (since i cannot imagine what is this for - (stangrze))
+# This file is needed by 'functions-ip6' version 2.41a
+
+### The order in the file is only for a good overview, it is not really
+### necessary. The important values are 'device' and 'key'!
+
+
+################# Tunnel section
+
+## Here you can configure tunnel endpoints. Be sure, that you set the device
+## entry in a right way like 'sit1', 'sit2' and so on, otherwise you will get
+## an error information from 'functions-ip6'
+
+#Device Key local remote ttl realdev
+icm-pl tunnel 195.136.100.3 193.219.28.246 64 eth0
+ceti tunnel 195.136.100.3 195.116.211.16 64 eth0
+ckm tunnel 195.136.100.3 195.136.5.6 64 eth0
+wiget tunnel 195.136.100.3 156.17.210.110 64 eth0
+#sit2 tunnel IPv4-Address
+#sit3 tunnel IPv4-Address
+
+
+# Tunnel route section
+# Here you can specify several routes to your configured tunnels.
+# More than one are possible!
+
+#Device Key Network
+icm-pl route 3ffe:902::/32
+ceti route 3ffe:902:3::/48
+ckm route 3ffe:902:10::1:0/112
+wiget route 3ffe:902:11::/48
+#sit2 route IPv6-Network/Prefix
+#sit3 route IPv6-Network/Prefix
+
--- /dev/null
+Writing System V init scripts for Red Hat Linux
+===============================================
+
+All System V init scripts are named /etc/rc.d/init.d/<servicename>
+where <servicename> is the name of the service. There must be no
+".init" suffix.
+
+
+Sample Script
+=============
+
+#!/bin/bash
+#
+# /etc/rc.d/init.d/<servicename>
+#
+# <description of the *service*>
+# <any general comments about this init script>
+#
+# <tags -- see below for tag definitions. *Every line* from the top
+# of the file to the end of the tags section must begin with a #
+# character. After the tags section, there should be a blank line.
+# This keeps normal comments in the rest of the file from being
+# mistaken for tags, should they happen to fit the pattern.>
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+<define any local shell functions used by the code that follows>
+
+case "$1" in
+ start)
+ echo -n "Starting <servicename> services: "
+ <start daemons, perhaps with the daemon function>
+ touch /var/lock/subsys/<servicename>
+ ;;
+ stop)
+ echo -n "Shutting down <servicename> services: "
+ <stop daemons, perhaps with the killproc function>
+ rm -f /var/lock/subsys/<servicename>
+ ;;
+ status)
+ <report the status of the daemons in free-form format,
+ perhaps with the status function>
+ ;;
+ restart)
+ <restart the daemons, normally with $0 stop; $0 start>
+ ;;
+ reload)
+ <cause the service configuration to be reread, either with
+ kill -HUP or by restarting the daemons, possibly with
+ $0 stop; $0 start>
+ ;;
+ probe)
+ <optional. If it exists, then it should determine whether
+ or not the service needs to be restarted or reloaded (or
+ whatever) in order to activate any changes in the configuration
+ scripts. It should print out a list of commands to give to
+ $0; see the description under the probe tag below.>
+ ;;
+ *)
+ echo "Usage: <servicename> {start|stop|status|reload|restart[|probe]"
+ exit 1
+ ;;
+esac
+
+
+Notes: the restart and reload functions may be (and commonly are)
+combined into one test, vis:
+ restart|reload)
+You are not prohibited from adding other commands; list all commands
+which you intend to be used interactively to the usage message.
+
+
+
+Functions in /etc/rc.d/init.d/functions
+=======================================
+
+daemon [+/-nicelevel] program [arguments] [&]
+
+ Starts a daemon, if it is not already running. Does
+ other useful things like keeping the daemon from dumping
+ core if it terminates unexpectedly.
+
+killproc program [signal]
+
+ Sends a signal to the program; by default it sends a SIGTERM,
+ and if the process doesn't die, it sends a SIGKILL a few
+ seconds later.
+
+ It also tries to remove the pidfile, if it finds one.
+
+pidofproc program
+
+ Tries to find the pid of a program; checking likely pidfiles,
+ using the pidof program, or even using ps. Used mainly from
+ within other functions in this file, but also available to
+ scripts.
+
+status program
+
+ Prints status information. Assumes that the program name is
+ the same as the servicename.
+
+
+Tags
+====
+
+# chkconfig: <startlevellist> <startpriority> <endpriority>
+
+ Required. <startlevellist> is a list of levels in which
+ the service should be started by default. <startpriority>
+ and <endpriority> are priority numbers. For example:
+ # chkconfig: 2345 20 80
+ Read 'man chkconfig' for more information.
+
+ Unless there is a VERY GOOD, EXPLICIT reason to the
+ contrary, the <endpriority> should be equal to
+ 100 - <startpriority>
+
+# description: <multi-line description of service>
+
+ Required. Several lines of description, continued with '\'
+ characters. The initial comment and following whitespace
+ on the following lines is ignored.
+
+# description[ln]: <multi-line description of service in the language \
+# ln, whatever that is>
+
+ Optional. Should be the description translated into the
+ specified language.
+
+# processname:
+
+ Optional, multiple entries allowed. For each process name
+ started by the script, there should be a processname entry.
+ For example, the samba service starts two daemons:
+ # processname: smdb
+ # processname: nmdb
+
+# config:
+
+ Optional, multiple entries allowed. For each static config
+ file used by the daemon, use a single entry. For example:
+ # config: /etc/httpd/conf/httpd.conf
+ # config: /etc/httpd/conf/srm.conf
+
+ Optionally, if the server will automatically reload the config
+ file if it is changed, you can append the word "autoreload" to
+ the line:
+ # config: /etc/foobar.conf autoreload
+
+# pidfile:
+
+ Optional, multiple entries allowed. Use just like the config
+ entry, except that it points at pidfiles. It is assumed that
+ the pidfiles are only updated at process creation time, and
+ not later. The first line of this file should be the ASCII
+ representation of the PID; a terminating newline is optional.
+ Any lines other than the first line are not examined.
+
+# probe: true
+
+ Optional, used IN PLACE of processname, config, and pidfile.
+ If it exists, then a proper reload-if-necessary cycle may be
+ acheived by running these commands:
+
+ command=$(/etc/rd.d/init.d/SCRIPT probe)
+ [ -n "$command" ] && /etc/rc.d/init.d/SCRIPT $command
+
+ where SCRIPT is the name of the service's sysv init script.
+
+ Scripts that need to do complex processing could, as an
+ example, return "run /var/tmp/<servicename.probe.$$"
+ and implement a "run" command which would execute the
+ named script and then remove it.
+
+ Note that the probe command should simply "exit 0" if nothing
+ needs to be done to bring the service into sync with its
+ configuration files.
+
+Copyright (c) 1998 Red Hat Software, Inc.
projects / projects / rc-scripts.git / commitdiff