X-Git-Url: http://git.pld-linux.org/?a=blobdiff_plain;f=apache-httpd.conf;h=e28647d03754c7bd19353243ffe3628608d1dc3d;hb=4d51c0eb6be1d8258f1cdc0f3f7e6a2c637e5b39;hp=ac04347d42a01c51bbc4d7213a8e8dcdb341da38;hpb=52e4c8396b0db272ccdb98584954b23c33e6b2d1;p=packages%2Fapache.git diff --git a/apache-httpd.conf b/apache-httpd.conf index ac04347..e28647d 100644 --- a/apache-httpd.conf +++ b/apache-httpd.conf @@ -1,739 +1,113 @@ -## -## httpd.conf -- Apache HTTP server configuration file -## - -##### Global Environment -# The directives in this section affect the overall operation of Apache, -# such as the number of concurrent requests it can handle or where it can -# find its configuration files. - -### Disable usage obsoletes access.conf and srm.conf -ResourceConfig /dev/null -AccessConfig /dev/null - -### ServerType -# is either inetd, or standalone. Inetd mode is only supported on Unix -# platforms. - -ServerType standalone - -### PidFile -# The file in which the server should record its process identification -# number when it starts. - -PidFile /var/run/httpd.pid - -### Timeout -# The number of seconds before receives and sends time out. -### KeepAliveTimeout -# Number of seconds to wait for the next request from the same client on the -# same connection. - -Timeout 300 -KeepAliveTimeout 15 - -### KeepAlive -# Whether or not to allow persistent connections (more than one request per -# connection). Set to "Off" to deactivate. -### MaxKeepAliveRequests -# The maximum number of requests to allow during a persistent connection. -# Set to 0 to allow an unlimited amount. We recommend you leave this number -# high, for maximum performance. - -KeepAlive On -MaxKeepAliveRequests 100 - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# NOTE! If you intend to place this on an NFS (or otherwise network) -# mounted filesystem then please read the LockFile documentation -# (available at ); -# you will save yourself a lot of trouble. -# -# Do NOT add a slash at the end of the directory path. -# -ServerRoot "/usr" - +# $Id$ # -# The LockFile directive sets the path to the lockfile used when Apache -# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or -# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at -# its default value. The main reason for changing it is if the logs -# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL -# DISK. The PID of the main server process is automatically appended to -# the filename. +# This is the main Apache HTTP server configuration file. +# It contains the configuration directives that give the server its instructions. # -LockFile /var/run/httpd.lock +# This config aims to be clean and readable. +# See for detailed information. +# In particular, see +# +# for a discussion of each configuration directive. -# -# ScoreBoardFile: File used to store internal server process information. -# Not all architectures require this. But if yours does (you'll know because -# this file will be created when you run Apache) then you *must* ensure that -# no two invocations of Apache share the same scoreboard file. -# -ScoreBoardFile /var/run/httpd.scoreboard - -# -# In the standard configuration, the server will process this file, -# srm.conf, and access.conf in that order. The latter two files are -# now distributed empty, as it is recommended that all directives -# be kept in a single file for simplicity. The commented-out values -# below are the built-in defaults. You can have the server ignore -# these files altogether by using "/dev/null" (for Unix) or -# "nul" (for Win32) for the arguments to the directives. -# -#ResourceConfig /etc/httpd/srm.conf -AccessConfig /etc/httpd/access.conf - - -# -# Server-pool size regulation. Rather than making you guess how many -# server processes you need, Apache dynamically adapts to the load it -# sees --- that is, it tries to maintain enough server processes to -# handle the current load, plus a few spare servers to handle transient -# load spikes (e.g., multiple simultaneous requests from a single -# Netscape browser). -# -# It does this by periodically checking how many servers are waiting -# for a request. If there are fewer than MinSpareServers, it creates -# a new spare. If there are more than MaxSpareServers, some of the -# spares die off. The default values are probably OK for most sites. -# -MinSpareServers 5 -MaxSpareServers 10 - -# -# Number of servers to start initially --- should be a reasonable ballpark -# figure. -# -StartServers 5 - -# -# Limit on total number of servers running, i.e., limit on the number -# of clients who can simultaneously connect --- if this limit is ever -# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. -# It is intended mainly as a brake to keep a runaway server from taking -# the system with it as it spirals down... -# -MaxClients 150 - -# -# MaxRequestsPerChild: the number of requests each child process is -# allowed to process before the child dies. The child will exit so -# as to avoid problems after prolonged use when Apache (and maybe the -# libraries it uses) leak memory or other resources. On most systems, this -# isn't really needed, but a few (such as Solaris) do have notable leaks -# in the libraries. -# -MaxRequestsPerChild 30 - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, in addition to the default. See also the -# directive. -# -#Listen 3000 -#Listen 12.34.56.78:80 - -# -# BindAddress: You can support virtual hosts with this option. This directive -# is used to tell the server which IP address to listen to. It can either -# contain "*", an IP address, or a fully qualified Internet domain name. -# See also the and Listen directives. -# -#BindAddress * - -# -# ExtendedStatus controls whether Apache will generate "full" status -# information (ExtendedStatus On) or just basic information (ExtendedStatus -# Off) when the "server-status" handler is called. The default is Off. -# -#ExtendedStatus On - -### Section 2: Dynamic Shared Object (DSO) Support -# -# Example: -# LoadModule foo_module libexec/mod_foo.so - -# Reconstruction of the complete module list from all available modules -# (static and shared ones) to achieve correct module execution order. -# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] -ClearModuleList -AddModule mod_so.c - -### Section 3: 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# definition. These values also provide defaults for -# any containers you may define later in the file. -# -# All of these directives may appear inside containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# If your ServerType directive (set earlier in the 'Global Environment' -# section) is set to "inetd", the next few directives don't have any -# effect since their settings are defined by the inetd configuration. -# Skip ahead to the ServerAdmin directive. -# - -# -# Port: The port to which the standalone server listens. For -# ports < 1023, you will need httpd to be run as root initially. -# -Port 80 +ServerRoot "/etc/httpd" +DefaultType text/plain -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# # User/Group: The name (or #number) of the user/group to run httpd as. -# . On SCO (ODT 3) use "User nouser" and "Group nogroup". -# . On HPUX you may not be able to use shared memory as nobody, and the -# suggested workaround is to create a user www and use that user. -# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) -# when the value of (unsigned)Group is above 60000; -# don't use Group on these systems! -# +# It is usually good practice to create a dedicated user and group for +# running httpd, as with most system services. User http Group http +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the +# directive. # +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses. +#Listen 192.168.1.1:80 +Listen 80 + # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such -# as error documents. +# as error documents. e.g. admin@example.com # -ServerAdmin admin@your_domain.org +ServerAdmin root@example.com +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. # -# ServerName allows you to set a host name which is sent back to clients for -# your server if it's different than the one the program would get (i.e., use -# "www" instead of the host's real name). -# -# Note: You cannot just invent host names and hope they work. The name you -# define here must be a valid DNS name for your host. If you don't understand -# this, ask your network administrator. # If your host doesn't have a registered DNS name, enter its IP address here. -# You will have to access it by its address (e.g., http://123.45.67.89/) -# anyway, and this will make redirections work in a sensible way. -# -#ServerName new.host.name - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/home/httpd/html" - -# -# Each directory to which Apache has access, can be configured with respect -# to which services and features are allowed and/or disabled in that -# directory (and its subdirectories). -# -# First, we configure the "default" to be a very restrictive set of -# permissions. -# - - Options FollowSymLinks - AllowOverride None - - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# This should be changed to whatever you set DocumentRoot to. -# - - -# -# This may also be "None", "All", or any combination of "Indexes", -# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". -# -# Note that "MultiViews" must be named *explicitly* --- "Options All" -# doesn't give it to you. -# - Options Indexes FollowSymLinks - -# -# This controls which options the .htaccess files in directories can -# override. Can also be "All", or any combination of "Options", "FileInfo", -# "AuthConfig", and "Limit" -# - AllowOverride None - -# -# Controls who can get stuff from this server. -# - Order allow,deny - Allow from all - - -# -# UserDir: The name of the directory which is appended onto a user's home -# directory if a ~user request is received. -# -UserDir public_html - -# -# Control access to UserDir directories. The following is an example -# for a site where these directories are restricted to read-only. -# -# -# AllowOverride FileInfo AuthConfig Limit -# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec -# -# Order allow,deny -# Allow from all -# -# -# Order deny,allow -# Deny from all -# -# - -# -# DirectoryIndex: Name of the file or files to use as a pre-written HTML -# directory index. Separate multiple entries with spaces. -# - -DirectoryIndex index.html index.htm index.shtml index.cgi - - -# -# AccessFileName: The name of the file to look for in each directory -# for access control information. -# -AccessFileName .htaccess - -# -# The following lines prevent .htaccess files from being viewed by -# Web clients. Since .htaccess files often contain authorization -# information, access is disallowed for security reasons. Comment -# these lines out if you want Web visitors to see the contents of -# .htaccess files. If you change the AccessFileName directive above, -# be sure to make the corresponding changes here. -# - - Order allow,deny - Deny from all - - -# -# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each -# document that was negotiated on the basis of content. This asks proxy -# servers not to cache the document. Uncommenting the following line disables -# this behavior, and proxies will be allowed to cache the documents. -# -#CacheNegotiatedDocs - -# -# UseCanonicalName: (new for 1.3) With this setting turned on, whenever -# Apache needs to construct a self-referencing URL (a URL that refers back -# to the server the response is coming from) it will use ServerName and -# Port to form a "canonical" name. With this setting off, Apache will -# use the hostname:port that the client supplied, when possible. This -# also affects SERVER_NAME and SERVER_PORT in CGI scripts. -# -UseCanonicalName On - -# -# TypesConfig describes where the mime.types file (or equivalent) is -# to be found. /etc/mime.types is provided by mailcap package. -# -TypesConfig /etc/mime.types - -# -# DefaultType is the default MIME type the server will use for a document -# if it cannot otherwise determine one, such as from filename extensions. -# If your server contains mostly text or HTML documents, "text/plain" is -# a good value. If most of your content is binary, such as applications -# or images, you may want to use "application/octet-stream" instead to -# keep browsers from trying to display binary files as though they are -# text. -# -DefaultType text/plain - -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# mod_mime_magic is not part of the default server (you have to add -# it yourself with a LoadModule [see the DSO paragraph in the 'Global -# Environment' section], or recompile the server and include mod_mime_magic -# as part of the configuration), so it's enclosed in an container. -# This means that the MIMEMagicFile directive will only be processed if the -# module is part of the server. -# - - MIMEMagicFile /etc/httpd/magic - - -# -# HostnameLookups: Log the names of clients or just their IP addresses -# e.g., www.apache.org (on) or 204.62.129.132 (off). -# The default is off because it'd be overall better for the net if people -# had to knowingly turn this feature on, since enabling it means that -# each client request will result in AT LEAST one lookup request to the -# nameserver. # -HostnameLookups Off +ServerName localhost -# # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. -# -ErrorLog /var/log/httpd/error_log +ErrorLog logs/error_log -# # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. -# LogLevel warn -# -# The following directives define some format nicknames for use with -# a CustomLog directive (see below). -# -LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined -LogFormat "%h %l %u %t \"%r\" %>s %b" common -LogFormat "%{Referer}i -> %U" referer -LogFormat "%{User-agent}i" agent - -# -# The location and format of the access logfile (Common Logfile Format). -# If you do not define any access logfiles within a -# container, they will be logged here. Contrariwise, if you *do* -# define per- access logfiles, transactions will be -# logged therein and *not* in this file. -# -CustomLog /var/log/httpd/access_log common - -# -# If you would like to have agent and referer logfiles, uncomment the -# following directives. -# -CustomLog /var/log/httpd/referer_log referer -CustomLog /var/log/httpd/agent_log agent - -# -# If you prefer a single logfile with access, agent, and referer information -# (Combined Logfile Format) you can use the following directive. -# -#CustomLog /var/log/httpd/access_log combined - -# -# Optionally add a line containing the server version and virtual host -# name to server-generated pages (error documents, FTP directory listings, -# mod_status and mod_info output etc., but not CGI generated documents). -# Set to "EMail" to also include a mailto: link to the ServerAdmin. -# Set to one of: On | Off | EMail -# -ServerSignature Email - -# -# Aliases: Add here as many aliases as you need (with no limit). The format is -# Alias fakename realname -# -# Note that if you include a trailing / on fakename then the server will -# require it to be present in the URL. So "/icons" isn't aliased in this -# example, only "/icons/".. -# -Alias /icons/ "/home/httpd/icons/" - - - Options Indexes MultiViews - AllowOverride None - Order allow,deny - Allow from all - - -# -# ScriptAlias: This controls which directories contain server scripts. -# ScriptAliases are essentially the same as Aliases, except that -# documents in the realname directory are treated as applications and -# run by the server when requested rather than as documents sent to the client. -# The same rules about trailing "/" apply to ScriptAlias directives as to -# Alias. -# -ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/" - -# -# "/home/httpd/cgi-bin" should be changed to whatever your ScriptAliased -# CGI directory exists, if you have that configured. -# - - AllowOverride None - Options None - Order allow,deny - Allow from all - - -# -# Redirect allows you to tell clients about documents which used to exist in -# your server's namespace, but do not anymore. This allows you to tell the -# clients where to look for the relocated document. -# Format: Redirect old-URI new-URL -# - -# -# Directives controlling the display of server-generated directory listings. -# - -# -# FancyIndexing is whether you want fancy directory indexing or standard -# -IndexOptions FancyIndexing - -# -# AddIcon* directives tell the server which icon to show for different -# files or filename extensions. These are only displayed for -# FancyIndexed directories. -# -AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip - -AddIconByType (TXT,/icons/text.gif) text/* -AddIconByType (IMG,/icons/image2.gif) image/* -AddIconByType (SND,/icons/sound2.gif) audio/* -AddIconByType (VID,/icons/movie.gif) video/* - -AddIcon /icons/binary.gif .bin .exe -AddIcon /icons/binhex.gif .hqx -AddIcon /icons/tar.gif .tar -AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv -AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip -AddIcon /icons/a.gif .ps .ai .eps -AddIcon /icons/layout.gif .html .shtml .htm .pdf -AddIcon /icons/text.gif .txt -AddIcon /icons/c.gif .c -AddIcon /icons/p.gif .pl .py -AddIcon /icons/f.gif .for -AddIcon /icons/dvi.gif .dvi -AddIcon /icons/uuencoded.gif .uu -AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl -AddIcon /icons/tex.gif .tex -AddIcon /icons/bomb.gif core - -AddIcon /icons/back.gif .. -AddIcon /icons/hand.right.gif README -AddIcon /icons/folder.gif ^^DIRECTORY^^ -AddIcon /icons/blank.gif ^^BLANKICON^^ - -# -# DefaultIcon is which icon to show for files which do not have an icon -# explicitly set. -# -DefaultIcon /icons/unknown.gif - -# -# AddDescription allows you to place a short description after a file in -# server-generated indexes. These are only displayed for FancyIndexed -# directories. -# Format: AddDescription "description" filename -# -AddDescription "GZIP compressed document" .gz -AddDescription "tar archive" .tar -AddDescription "GZIP compressed tar archive" .tgz - -# -# ReadmeName is the name of the README file the server will look for by -# default, and append to directory listings. -# -# HeaderName is the name of a file which should be prepended to -# directory indexes. -# -# The server will first look for name.html and include it if found. -# If name.html doesn't exist, the server will then look for name.txt -# and include it as plaintext if found. -# -ReadmeName README -HeaderName HEADER - -# -# IndexIgnore is a set of filenames which directory indexing should ignore -# and not include in the listing. Shell-style wildcarding is permitted. -# -IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t - -# -# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress -# information on the fly. Note: Not all browsers support this. -# Despite the name similarity, the following Add* directives have nothing -# to do with the FancyIndexing customization directives above. -# -AddEncoding x-compress Z -AddEncoding x-gzip gz - -# -# AddLanguage allows you to specify the language of a document. You can -# then use content negotiation to give a browser a file in a language -# it can understand. Note that the suffix does not have to be the same -# as the language keyword --- those with documents in Polish (whose -# net-standard language code is pl) may wish to use "AddLanguage pl .po" -# to avoid the ambiguity with the common suffix for perl scripts. -# -AddLanguage en .en -AddLanguage fr .fr -AddLanguage de .de -AddLanguage da .da -AddLanguage el .el -AddLanguage it .it -AddLanguage pl .po -# -# LanguagePriority allows you to give precedence to some languages -# in case of a tie during content negotiation. -# Just list the languages in decreasing order of preference. -# -LanguagePriority en pl fr de - -# -# AddHandler allows you to map certain file extensions to "handlers", -# actions unrelated to filetype. These can be either built into the server -# or added with the Action command (see below) -# -# If you want to use server side includes, or CGI outside -# ScriptAliased directories, uncomment the following lines. -# -# To use CGI scripts: -# -AddHandler cgi-script .cgi - -# -# To use server-parsed HTML files -# -AddType text/html .shtml -AddHandler server-parsed .shtml - -# -# Uncomment the following line to enable Apache's send-asis HTTP file -# feature -# -AddHandler send-as-is asis - -# -# If you wish to use server-parsed imagemap files, use -# -AddHandler imap-file map - -# -# To enable type maps, you might want to use -# -AddHandler type-map var - -# -# Action lets you define media types that will execute a script whenever -# a matching file is called. This eliminates the need for repeated URL -# pathnames for oft-used CGI file processors. -# Format: Action media/type /cgi-script/location -# Format: Action handler-name /cgi-script/location -# - -# -# MetaDir: specifies the name of the directory in which Apache can find -# meta information files. These files contain additional HTTP headers -# to include when sending the document -# -MetaDir .web - -# -# MetaSuffix: specifies the file name suffix for the file containing the -# meta information. -# -MetaSuffix .meta - -# -# Customizable error response (Apache style) -# these come in three flavors -# -# 1) plain text -#ErrorDocument 500 "The server made a boo boo. -# n.b. the (") marks it as text, it does not get output -# -# 2) local redirects -#ErrorDocument 404 /missing.html -# to redirect to local URL /missing.html -#ErrorDocument 404 /cgi-bin/missing_handler.pl -# N.B.: You can redirect to a script or a document using server-side-includes. -# -# 3) external redirects -#ErrorDocument 402 http://some.other_server.com/subscription_info.html -# N.B.: Many of the environment variables associated with the original -# request will *not* be available to such a script. - -Alias /errordocs/ "/home/httpd/errordocs/" - - - AllowOverride none - Options IncludesNoExec FollowSymLinks - - -ErrorDocument 400 /errordocs/400.shtml -ErrorDocument 401 /errordocs/401.shtml -ErrorDocument 403 /errordocs/403.shtml -ErrorDocument 404 /errordocs/404.shtml -ErrorDocument 405 /errordocs/405.shtml -ErrorDocument 406 /errordocs/406.shtml -ErrorDocument 408 /errordocs/408.shtml -ErrorDocument 410 /errordocs/410.shtml -ErrorDocument 411 /errordocs/411.shtml -ErrorDocument 414 /errordocs/414.shtml -ErrorDocument 500 /errordocs/500.shtml -ErrorDocument 503 /errordocs/503.shtml - -# The following directives modify normal HTTP response behavior. -# The first directive disables keepalive for Netscape 2.x and browsers that -# spoof it. There are known problems with these browser implementations. -# The second directive is for Microsoft Internet Explorer 4.0b2 -# which has a broken HTTP/1.1 implementation and does not properly -# support keepalive when it is used on 301 or 302 (redirect) responses. -# -BrowserMatch "Mozilla/2" nokeepalive -BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 - -# -# The following directive disables HTTP/1.1 responses to browsers which -# are in violation of the HTTP/1.0 spec by not being able to grok a -# basic 1.1 response. -# -BrowserMatch "RealPlayer 4\.0" force-response-1.0 -BrowserMatch "Java/1\.0" force-response-1.0 -BrowserMatch "JDK/1\.0" force-response-1.0 - -# -# Allow remote server configuration reports, with the URL of -# http://servername/server-info (requires that mod_info.c be loaded). -# Change the ".your_domain.com" to match your domain to enable. -# -# -# SetHandler server-info -# Order deny,allow -# Deny from all -# Allow from .your_domain.com -# - -# -# There have been reports of people trying to abuse an old bug from pre-1.1 -# days. This bug involved a CGI script distributed as a part of Apache. -# By uncommenting these lines you can redirect these attacks to a logging -# script on phf.apache.org. Or, you can record them yourself, using the script -# support/phf_abuse_log.cgi. -# -# -# Deny from all -# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi -# +Timeout 300 +KeepAlive On +MaxKeepAliveRequests 100 +KeepAliveTimeout 5 +UseCanonicalName Off +AccessFileName .htaccess +ServerTokens Full +ServerSignature On +HostnameLookups Off +#AddDefaultCharset UTF-8 + +TraceEnable Off + +# Include other modules and packages config. +Include conf.d/*.conf + +# Include webapps config +Include webapps.d/*.conf + + + # ScriptAlias: This controls which directories contain server scripts. + # ScriptAliases are essentially the same as Aliases, except that + # documents in the target directory are treated as applications and + # run by the server when requested rather than as documents sent to the + # client. The same rules about trailing "/" apply to ScriptAlias + # directives as to Alias. + # + ScriptAlias /cgi-bin/ "/home/services/httpd/cgi-bin/" + + + AllowOverride None + Options None + + Order allow,deny + Allow from all + + + +# VirtualHost: Allows the daemon to respond to requests for more than one +# server address, if your server machine is configured to accept IP packets +# for multiple addresses. This can be accomplished with the ifconfig +# alias flag, or through kernel patches like VIF. + +# Any apache.conf conf directive may go into a VirtualHost command. +# See also the BindAddress entry. + +# Setup default vhost (first one defined in config) and include vhosts configuration +NameVirtualHost *:80 + + ServerName localhost +# ServerAdmin webmaster@host.example.com +# DocumentRoot /www/docs/host.example.com +# ErrorLog logs/host.example.com-error_log +# TransferLog logs/host.example.com-access_log + + +Include vhosts.d/*.conf