X-Git-Url: http://git.pld-linux.org/?a=blobdiff_plain;f=VMware-player.init;fp=VMware-player.init;h=0000000000000000000000000000000000000000;hb=8793ed7f873c09a1d27ba7e4f4ed979f4aba83f6;hp=5b88f5bbe7b3f2cbdb87cbf380de5bbbcf53ee62;hpb=223dce06a3b047bbb47e69201e1ce8a2c65a32cb;p=packages%2FVMware-player.git

diff --git a/VMware-player.init b/VMware-player.init
deleted file mode 100644
index 5b88f5b..0000000
--- a/VMware-player.init
+++ /dev/null
@@ -1,450 +0,0 @@
-#!/bin/sh
-
-#
-# Copyright 1998 VMware, Inc.  All rights reserved.
-#
-
-# vmnet:	Manages the services needed to run VMware networking
-#
-# description:	Manages the services needed to run VMware networking
-#
-# chkconfig:	235 90 8
-#
-# probe:	true
-# hide:		true
-
-subsys=vmnet
-driver=vmmon
-vnet=vmnet
-bridge=vmnet-bridge
-dhcpd=vmnet-dhcpd
-netifup=vmnet-netifup
-natd=vmnet-natd
-ping=vmware-ping
-smbd=vmware-smbd
-nmbd=vmware-nmbd
-
-# Source config files
-vmware_etc_dir=/etc/vmware
-vmware_locations="$vmware_etc_dir"/locations
-vmnet_cfg="$vmware_etc_dir"/vmnet.conf
-
-for f in $vmware_locations $vmnet_cfg; do
-	if [ -r $f ]; then
-		. $f
-	else
-		echo "FATAL: Unable to read $f"
-		exit 1
-	fi
-done
-
-# System wide functions
-. /etc/rc.d/init.d/functions
-
-# Create /dev/vmnetXX device
-vmware_create_vmnet() {
-    local vHubNr="$1" # IN
-    local vDevice="/dev/vmnet$vHubNr"
-
-    if [ ! -e "$vDevice" ]; then
-	mknod -m 600 "$vDevice" c 119 "$vHubNr"
-    fi
-}
-
-#
-# Create a temporary directory
-#
-
-# They are a lot of small utility programs to create temporary files in a
-# secure way, but none of them is standard. So I wrote this --hpreg
-make_tmp_dir() {
-	local dirname="$1" # OUT
-	local prefix="$2"  # IN
-	local tmp
-	local serial
-	local loop
-
-	tmp="${TMPDIR:-/tmp}"
-	# Don't overwrite existing user data
-	# -> Create a directory with a name that didn't exist before
-	#
-	# This may never succeed (if we are racing with a malicious process), but at
-	# least it is secure
-	serial=0
-	loop='yes'
-	while [ "$loop" = 'yes' ]; do
-		# Check the validity of the temporary directory. We do this in the loop
-		# because it can change over time
-		if [ ! -d "$tmp" ]; then
-			echo 'Error: "'"$tmp"'" is not a directory.'
-			echo
-			exit 1
-		fi
-		if [ ! -w "$tmp" -o ! -x "$tmp" ]; then
-			echo 'Error: "'"$tmp"'" should be writable and executable.'
-			echo
-			exit 1
-		fi
-		# Be secure
-		# -> Don't give write access to other users (so that they can not use this
-		# directory to launch a symlink attack)
-		if mkdir -m 0755 "$tmp"'/'"$prefix$serial" >/dev/null 2>&1; then
-			loop='no'
-		else
-			serial=`expr "$serial" + 1`
-			if [ "`expr "$serial" % 200`" = '0' ]; then
-				echo 'Warning: The "'"$tmp"'" directory may be under attack.'
-				echo
-			fi
-		fi
-	done
-	eval "$dirname"'="$tmp"'"'"'/'"'"'"$prefix$serial"'
-}
-
-#
-# Utilities
-#
-
-# Compute the subnet address associated to a couple IP/netmask
-ipv4_subnet() {
-	local ip="$1"
-	local netmask="$2"
-
-	# Split quad-dotted addresses into bytes
-	# There is no double quote around the back-quoted expression on purpose
-	# There is no double quote around $ip and $netmask on purpose
-	set -- `IFS='.'; echo $ip $netmask`
-	echo $(($1 & $5)).$(($2 & $6)).$(($3 & $7)).$(($4 & $8))
-}
-
-# Compute the broadcast address associated to a couple IP/netmask
-ipv4_broadcast() {
-	local ip="$1"
-	local netmask="$2"
-
-	# Split quad-dotted addresses into bytes
-	# There is no double quote around the back-quoted expression on purpose
-	# There is no double quote around $ip and $netmask on purpose
-	set -- `IFS='.'; echo $ip $netmask`
-	echo $(($1 | (255 - $5))).$(($2 | (255 - $6))).$(($3 | (255 - $7))).$(($4 | (255 - $8)))
-}
-
-# Count the number of running virtual machines by looking at the number of references
-# to the $driver module.
-countVMs() {
-	# Beware of module dependancies here. An exact match is important
-	/sbin/lsmod | awk 'BEGIN {n = 0;} {if ($1 == "'"$driver"'") n = $3;} END {print n;}'
-}
-
-# Check if there is an IP route for a given subnet via a given interface
-# Return true if there is _NO_ such route
-noRoutePresent() {
-	local subnet="$1" # IN
-	local intf="$2"   # IN
-
-	# Beware, there may be several identical routes
-	[ "`/sbin/route -n | grep '^'"$subnet"'.*'"$intf"'$'`" = '' ]
-}
-
-
-# Macro definitions
-#
-# Note:
-#  . Each daemon must be started from its own directory to avoid busy devices
-#  . Each PID file doesn't need to be added to the installer database, because
-#    it is going to be automatically removed when it becomes stale (after a
-#    reboot). It must go directly under /var/run, or some distributions
-#    (RedHat 6.0) won't clean it
-#
-
-# Terminate a process synchronously
-vmware_synchrone_kill() {
-	local pid="$1"    # IN
-	local signal="$2" # IN
-	local second
-
-	kill -"$signal" "$pid"
-	# Wait a bit to see if the dirty job has really been done
-	for second in 0 1 2 3 4 5 6 7 8 9 10; do
-		if [ ! -d /proc/"$pid" ]; then
-			# Success
-			return 0
-		fi
-		sleep 1
-	done
-	# Timeout
-	return 1
-}
-
-# Kill the process associated to a pidfile
-vmware_stop_pidfile() {
-	local pidfile="$1" # IN
-	local pid
-
-	pid=`cat "$pidfile" 2>/dev/null`
-	if [ "$pid" = '' ]; then
-		# The file probably does not exist or is empty. Success
-		return 0
-	fi
-	# Keep only the first number we find, because some Samba pid files are really
-	# trashy: they end with NUL characters
-	# There is no double quote around $pid on purpose
-	set -- $pid
-	pid="$1"
-	# First try a nice SIGTERM
-	if vmware_synchrone_kill "$pid" 15; then
-		return 0
-	fi
-	# Then send a strong SIGKILL
-	if vmware_synchrone_kill "$pid" 9; then
-		return 0
-	fi
-	return 1
-}
-
-# Start the host-only network user service
-vmware_start_hostonly() {
-	local vHubNr="$1"    # IN
-	local vHostIf="$2"   # IN
-	local ifIp="$3"      # IN
-	local ifMask="$4"    # IN
-	local run_dhcpd="$5" # IN
-	local run_samba="$6" # IN
-	local ifNet
-
-	# Do a cursory check to see if the host-only network
-	# configuration is still ok.  We do this so that mobile
-	# hosts don't get setup at install time and then moved to
-	# a new locale where the host-only network config is no
-	# longer valid.
-	#
-	# NB: This really needs to be done at power-on time when
-	#     VM is configured to use host-only networking so that
-	#     we aren't fooled by dynamic changes in the network.
-	#
-	# XXX ping takes 10 seconds to timeout if nobody answers
-	#     that slows boot too much so we do this bit in the
-	#     background.
-	if "$VM_BINDIR"/"$ping" -q "$ifIp"; then
-		echo 'Host-only networking disabled because '"$ifIp"
-		echo 'appears to be a real, physical, existing address.'
-		echo 'Please modify your host-only network configuration.'
-		exit 1
-	fi
-	cd "$VM_BINDIR" && "$VM_BINDIR"/"$netifup" \
-	  -d /var/run/"$netifup"-"$vHostIf".pid /dev/vmnet"$vHubNr" "$vHostIf"
-	[ "$?" -eq 0 ] || exit 1
-	# Configure the virtual host ethernet interface and define the private IP
-	# network
-	#
-	# . We provide the broadcast address explicitly because versions of ifconfig
-	#   prior to 1.39 (1999-03-18) seem to miscompute it
-	# . 2.0.x kernels don't install a route when the interface is marked up, but
-	#   2.2.x kernel do. Since we want to see any errors from route we don't
-	#   just discard messages from route, but instead check if the route got
-	#   installed before manually adding one.
-	ifNet=`ipv4_subnet "$ifIp" "$ifMask"`
-	if ifconfig "$vHostIf" inet "$ifIp" netmask "$ifMask" \
-	  broadcast "`ipv4_broadcast "$ifIp" "$ifMask"`" up \
-	  && noRoutePresent "$ifNet" "$vHostIf"; then
-		route add -net "$ifNet" netmask "$ifMask" "$vHostIf"
-	fi
-	if [ "$run_dhcpd" = 'yes' ]; then
-		# Start a DHCP server on a private IP network
-		# The daemon already logs its output in the system log, so we can safely
-		# trash it
-		cd "$VM_BINDIR" && "$VM_BINDIR"/"$dhcpd" \
-		  -cf "$vmware_etc_dir"/"$vHostIf"/dhcpd/dhcpd.conf \
-		  -lf "$vmware_etc_dir"/"$vHostIf"/dhcpd/dhcpd.leases \
-		  -pf /var/run/"$dhcpd"-"$vHostIf".pid "$vHostIf" >/dev/null 2>&1 || exit 1
-	fi
-	if [ "$run_samba" = 'yes' ]; then
-		# Start a SMB name server on a private IP network
-		# Disable logging to avoid the uncontrolled creation of unmanaged files
-		cd "$VM_BINDIR" && "$VM_BINDIR"/"$nmbd" -D -l /dev/null \
-		  -s "$vmware_etc_dir"/"$vHostIf"/smb/smb.conf \
-		  -f /var/run/"$nmbd"-"$vHostIf".pid || exit 1
-		# Start a SMB share server on a private IP network
-		# Disable logging to avoid the uncontrolled creation of unmanaged files
-		cd "$VM_BINDIR" && "$VM_BINDIR"/"$smbd" -D -l /dev/null \
-		  -s "$vmware_etc_dir"/"$vHostIf"/smb/smb.conf \
-		  -f /var/run/"$smbd"-"$vHostIf".pid || exit 1
-	fi
-}
-
-# Stop the host-only network user service
-vmware_stop_hostonly() {
-	local vHostIf="$1"   # IN
-	local ifIp="$2"      # IN
-	local ifMask="$3"    # IN
-	local ifNet
-
-	# Terminate the private network
-	ifNet=`ipv4_subnet "$ifIp" "$ifMask"`
-	noRoutePresent "$ifNet" "$vHostIf" || route del -net "$ifNet" netmask "$ifMask" || exit 1
-	# To test if the interface exists, we can not just look at the exitcode
-	# because old versions of ifconfig don't exit with 1 when invoked with a
-	# non-existing interface
-	if [ "`ifconfig "$vHostIf" 2>/dev/null`" != '' ]; then
-		ifconfig "$vHostIf" down || exit 1
-	fi
-	vmware_stop_pidfile /var/run/"$netifup"-"$vHostIf".pid || exit 1
-}
-
-# See how we were called.
-case "$1" in
-  start)
-	if [ -f /var/lock/subsys/"$subsys" ]; then
-		msg_already_running "VMware Workstation networking"
-	fi
-	# Try to load parport_pc. Failure is allowed as it does not exist
-	# on kernels 2.0
-	/sbin/modprobe parport_pc >/dev/null 2>&1
-	msg_starting 'Virtual machine monitor'
-	busy
-	/sbin/modprobe $driver
-	[ "$?" -eq "0" ] && ok || fail
-	if [ "$VM_NETWORKING" = 'yes' ]; then
-		msg_starting 'Virtual ethernet'
-		busy
-		/sbin/modprobe $vnet
-		[ "$?" -eq 0 ] && ok || fail
-		vHubNr=0
-		while [ $vHubNr -lt 9 ]; do
-			eval 'interface="$VNET_'"$vHubNr"'_INTERFACE"'
-			eval 'hostaddr="$VNET_'"$vHubNr"'_HOSTONLY_HOSTADDR"'
-			eval 'netmask="$VNET_'"$vHubNr"'_HOSTONLY_NETMASK"'
-			if [ -n "$interface" ]; then
-				vmware_create_vmnet "$vHubNr"
-				# Connect a physical host ethernet interface to a virtual ethernet hub
-				msg_starting 'Bridged networking on /dev/vmnet'"$vHubNr"
-				busy
-				cd "$VM_BINDIR" && "$VM_BINDIR"/"$bridge" \
-				  -d /var/run/"$bridge"-"$vHubNr".pid /dev/vmnet"$vHubNr" "$interface"
-				[ "$?" -eq 0 ] && ok || fail
-			elif [ -n "$hostaddr" -a -n "$netmask" ]; then
-				vmware_create_vmnet "$vHubNr"
-				eval 'samba="$VNET_'"$vHubNr"'_SAMBA"'
-				msg_starting 'Host-only networking on /dev/vmnet'"$vHubNr"
-				busy
-				vmware_start_hostonly "$vHubNr" 'vmnet'"$vHubNr" "$hostaddr" \
-				  "$netmask" 'yes' "$samba"
-				[ "$?" -eq 0 ] && ok || fail
-				eval 'nat="$VNET_'"$vHubNr"'_NAT"'
-				if [ "$nat" = 'yes' ]; then
-					# Start the NAT network user service
-					msg_starting 'NAT networking on /dev/vmnet'"$vHubNr"
-					busy
-					cd "$VM_BINDIR" && "$VM_BINDIR"/"$natd" \
-					  -d /var/run/"$natd"-"$vHubNr".pid \
-					  -m /var/run/"$natd"-"$vHubNr".mac \
-					  -c "$vmware_etc_dir"/vmnet"$vHubNr"/nat/nat.conf >/dev/null 2>&1
-					[ "$?" -eq 0 ] && ok || fail
-				fi
-			fi
-			vHubNr=$(($vHubNr + 1))
-		done
-	fi
-	touch /var/lock/subsys/"$subsys"
-	;;
-
-  stop)
-	if [ "`countVMs`" -gt 0 ]; then
-		echo 'At least one instance of VMware Workstation is still running.'
-		echo 'Please stop all running instances of VMware Workstation first.'
-		echo
-	fi
-	if [ ! -f /var/lock/subsys/"$subsys" ]; then
-		msg_not_running "VMware Workstation networking"
-	fi
-	# Try to unload parport_pc. Failure is allowed as it does not exist
-	# on kernels 2.0, and some other process could be using it.
-	/sbin/modprobe -r parport_pc >/dev/null 2>&1
-	if [ "$VM_NETWORKING" = "yes" ]; then
-		# NB: must kill off processes using vmnet before
-		#     unloading module
-		vHubNr=0
-		while [ $vHubNr -lt 9 ]; do
-			eval 'interface="$VNET_'"$vHubNr"'_INTERFACE"'
-			eval 'hostaddr="$VNET_'"$vHubNr"'_HOSTONLY_HOSTADDR"'
-			eval 'netmask="$VNET_'"$vHubNr"'_HOSTONLY_NETMASK"'
-			if [ -n "$interface" ]; then
-				# Disconnect a physical host ethernet interface from a virtual ethernet hub
-				msg_stopping "Bridged networking on /dev/vmnet$vHubNr"
-				busy
-				vmware_stop_pidfile /var/run/"$bridge"-"$vHubNr".pid
-				[ "$?" -eq 0 ] && ok || fail
-			elif [ -n "$hostaddr" -a -n "$netmask" ]; then
-				# Stop a DHCP server on a private IP network
-				msg_stopping "DHCP server on /dev/vmnet$vHubNr"
-				busy
-				vmware_stop_pidfile /var/run/"$dhcpd"-"vmnet$vHubNr".pid
-				[ "$?" -eq 0 ] && ok || fail
-				eval 'samba="$VNET_'"$vHubNr"'_SAMBA"'
-				if [ "$samba" = "yes" ]; then
-					# Stop a SMB share server on a private IP network
-					msg_stopping 'SMB share server on /dev/vmnet'"$vHubNr"
-					busy
-					vmware_stop_pidfile /var/run/"$smbd"-'vmnet'"$vHubNr".pid
-					[ "$?" -eq 0 ] && ok || fail
-					# Stop a SMB name server on a private IP network
-					msg_stopping 'SMB name server on /dev/vmnet'"$vHubNr"
-					busy
-					vmware_stop_pidfile /var/run/"$nmbd"-'vmnet'"$vHubNr".pid
-					[ "$?" -eq 0 ] && ok || fail
-				fi
-				eval 'nat="$VNET_'"$vHubNr"'_NAT"'
-				if [ "$nat" = "yes" ]; then
-					# Stop the NAT network user service
-					msg_stopping 'NAT networking on /dev/vmnet'"$vHubNr"
-					busy
-					vmware_stop_pidfile /var/run/"$natd"-"$vHubNr".pid
-					[ "$?" -eq 0 ] && ok || fail
-				fi
-				msg_stopping 'Host-only networking on /dev/vmnet'"$vHubNr"
-				busy
-				vmware_stop_hostonly 'vmnet'"$vHubNr" "$hostaddr" "$netmask"
-				[ "$?" -eq 0 ] && ok || fail
-
-			fi
-			vHubNr=$(($vHubNr + 1))
-		done
-		msg_stopping 'Virtual machine monitor'
-		busy
-		if /sbin/lsmod | grep -q ^"$driver"; then
-			/sbin/rmmod "$driver"
-		fi
-		[ "$?" -eq "0" ] && ok || fail
-		msg_stopping 'Virtual ethernet'
-		busy
-		if /sbin/lsmod | grep -q ^"$vnet"; then
-			/sbin/rmmod "$vnet"
-		fi
-		[ "$?" -eq "0" ] && ok || fail
-	fi
-	rm -f /var/lock/subsys/"$subsys"
-	;;
-  status)
-	if [ "`countVMs`" -gt 0 ]; then
-		echo 'At least one instance of VMware Workstation is still running.'
-		echo
-	fi
-	if [ "$VM_NETWORKING" = "yes" ]; then
-		status "$bridge"
-		status "$dhcpd"
-		status "$netifup"
-	fi
-	if [ "$VM_NETWORKING" = "yes" ]; then
-		echo -n "Module $vnet "
-		/sbin/modprobe "$vnet" >/dev/null 2>&1 && echo installed || echo "not installed"
-	fi
-	;;
-  restart)
-	"$0" stop && "$0" start
-	;;
-  *)
-	echo "Usage: `basename "$0"` {start|stop|status|restart}"
-	exit 3
-esac
-
-exit 0