- added using depmod macro

[packages/lm_sensors.git] / sensors.sysconfig

diff --git a/sensors.sysconfig b/sensors.sysconfig
index babf5293d9d1a2f0beac1cef77f9a12b42646971..931c2c324fcae3bb291849d3b7815841422c3036 100644 (file)
--- a/sensors.sysconfig
+++ b/sensors.sysconfig
@@ -1,17 +1,6 @@
 # configuration for harware sensors monitoring daemon
-
 # in intevrals use suffix "m" for minutes, "s" for seconds, "h" for hours
 # 0 means turning facility off
-#
-# BUS stands for i2c bus, one of:
-# ali1535, ali15x5, amd756, hydra, i801, i810, isa, keywest,
-# piix4, sis5595, tsunami, via, viapro, voodoo3
-#
-# CHIP stands for sensors chip, one of:
-# adm1021, adm1024, adm1025, adm9240, bt869, ddcmon, ds1621, eeprom
-# fscpos, fscscy, gl518sm, gl520sm, icspll, it87, lm75, lm78, lm80
-# lm87, ltc1710, matorb, maxilife, mtp008, pcf8574, sis5595, thmc50
-# via686a, w83781d
 
 # interval between scanning alarms
 INTERVAL=1m
@@ -19,9 +8,30 @@ INTERVAL=1m
 # interval between logging
 LOG_INTERVAL=20m
 
+# interval between RRD logging
+# RRD_INTERVAL=1m
+
+# RRD db location
+# RRD_LOGFILE=/var/log/sensors.rrd
+
 # configure sensors (i.e. call `sensors -s') before starting daemon?
+# Allows to change min and max alarm limits from sensors.conf
 #SENSORS_SET=1
 
+# BUS - stands for i2c bus, one of: ali1535, ali15x3, amd756, hydra, i801,
+#      i810, isa, piix4, savage4, sis5595, via, viapro, voodoo3
+
+BUS=
+
+# CHIP - stands for sensors chip, one of: adm1021, adm1024, adm1025,
+#      adm9240, bt869, ddcmon, ds1621, eeprom fscpos, fscscy, gl518sm,
+#      gl520sm, icspll, it87, lm75, lm78, lm80 lm87, ltc1710, matorb,
+#      maxilife, mtp008, pcf8574, sis5595, thmc50 via686a, vt1211, w83781d
+
+CHIP=
+
+# You may use sensors-detect commant to check what bus and chips are available
+
 # example for VIAKT* mainboards (bus is not (!) via)
 # BUS=isa
 # CHIP=via686a