#!/bin/sh
#
# /etc/rc.d/rc.sysinit - run once at boot time
-# $Id: rc.sysinit,v 1.42 2000/01/05 01:18:01 kloczek Exp $
+# $Id: rc.sysinit,v 1.69.2.14 2001/10/25 08:27:05 misiek Exp $
#
# Taken in part from Miquel van Smoorenburg's bcheckrc.
# Changes: Arkadiusz Mi¶kiewicz <misiek@pld.org.pl>
#
+# Rerun ourselves through initlog
+if [ -z "$IN_INITLOG" ]; then
+ [ -f /sbin/initlog ] && exec /sbin/initlog -r /etc/rc.d/rc.sysinit
+fi
+
# Set the path
PATH=/bin:/sbin:/usr/bin:/usr/sbin
export PATH
+# we need /proc mounted before everything
+mount -n -o gid=17 -t proc /proc /proc
+
+# Choose Hardware profile
+rm -f /var/run/hwprofile 2> /dev/null
+if [ -f /etc/sysconfig/hwprof ]; then
+ . /etc/sysconfig/hwprof
+ if is_yes "${HWPROFILES}" && [ -x /sbin/hwprofile -a -d /etc/sysconfig/hwprofiles/data ]; then
+ mount -n / -o rw,remount
+ /sbin/hwprofile -qf
+ mount -n / -o ro,remount
+ fi
+fi
+
# NLS
-if [ -f /etc/sysconfig/i18n ]; then
+if [ -r /etc/sysconfig/i18n ]; then
. /etc/sysconfig/i18n
[ -n "$LANG" ] && export LANG || unset LANG
[ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE
. /etc/rc.d/init.d/functions
# Read network config data.
-if [ -f /etc/sysconfig/network ]; then
+if [ -r /etc/sysconfig/network ]; then
. /etc/sysconfig/network
else
NETWORKING=no
fi
# Read system config data.
-if [ -f /etc/sysconfig/system ]; then
+if [ -r /etc/sysconfig/system ]; then
. /etc/sysconfig/system
else
RUN_SULOGIN_ON_ERR=yes
- RUN_ISAPNP=yes
+ RUN_USERPNP=yes
+ RUN_KERNELPNP=yes
PANIC_REBOOT_TIME=0
DELAY_LOGIN=yes
CLEAN_TMP=no
fi
# Print welcome message
-echo -e "\t\t\t`termput setaf 6` Powered by `termput setaf 2`PLD/Linux`termput setaf 7`"
+nls "\t\t\t%sPowered by %sPLD GNU/Linux%s" "$(termput setaf 6)" "$(termput setaf 2)" "$(termput setaf 7)"
+if is_yes "$PROMPT"; then
+ nls -n "\t\t Press %sI%s to enter interactive startup." "$(termput setaf 1)" "$(termput setaf 7)"
+ echo
+ sleep 1
+fi
# Set console loglevel
/bin/dmesg -n $CONSOLE_LOGLEVEL
-# we need /proc mounted before starting fsck
-mount -n -t proc /proc /proc
+# /dev must be also mounted before everything but only if we want use them ;-)
+if is_yes "$MOUNT_DEVFS"; then
+ run_cmd "Mounting Device Filesystem" mount -n -t devfs /dev /dev
+fi
+
+# set up devfsd
+if [ -e /dev/.devfsd -a -x /sbin/devfsd ]; then
+ run_cmd "Starting Device Filesystem Daemon" /sbin/devfsd /dev
+fi
+
+# Configure Linux kernel
+run_cmd "Configuring kernel parameters" /sbin/sysctl -p /etc/sysctl.conf
+
+# Set the system clock.
+ARC=0
+SRM=0
+UTC=0
+
+if [ -f /etc/sysconfig/clock ]; then
+ . /etc/sysconfig/clock
+
+ # convert old style clock config to new values
+ if [ "${CLOCKMODE}" = "GMT" ]; then
+ UTC=true
+ elif [ "${CLOCKMODE}" = "ARC" ]; then
+ ARC=true
+ fi
+fi
+
+if grep "system serial" /proc/cpuinfo | grep -q MILO ; then
+ ARC=true
+fi
+
+CLOCKDEF=""
+CLOCKFLAGS="--hctosys"
+
+if is_yes "${UTC}"; then
+ CLOCKFLAGS="${CLOCKFLAGS} --utc";
+ CLOCKDEF="${CLOCKDEF} (utc)";
+else
+ CLOCKFLAGS="${CLOCKFLAGS} --localtime";
+ CLOCKDEF="${CLOCKDEF} (local)";
+fi
+
+if is_yes "${ARC}"; then
+ CLOCKFLAGS="${CLOCKFLAGS} -A";
+ CLOCKDEF="${CLOCKDEF} (arc)";
+fi
+
+if is_yes "${SRM}"; then
+ CLOCKFLAGS="${CLOCKFLAGS} -S";
+ CLOCKDEF="${CLOCKDEF} (srm)";
+fi
+
+# Check if timezone definition is available
+if [ -e /etc/localtime ] ; then
+ if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
+ show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
+ fi
+else
+ TIME_SETUP_DELAYED=yes
+fi
# Start up swapping.
-run_cmd "`nls "Activating swap partitions"`" swapon -a
+run_cmd "Activating swap partitions" swapon -a
# Set the hostname.
-run_cmd "`nls "Host:"` ${HOSTNAME}" hostname ${HOSTNAME}
+run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME}
# Set the NIS domain name
if [ -n "$NISDOMAIN" ]; then
- run_cmd "`nls "NIS Domain:"` ${NISDOMAIN}" domainname $NISDOMAIN
+ run_cmd "$(nls 'NIS Domain:') ${NISDOMAIN}" domainname $NISDOMAIN
else
domainname ""
fi
+# Initialize USB controller and HID devices
+usb=0
+if ! grep -iq "nousb" /proc/cmdline 2>/dev/null && ! grep -q "usb" /proc/devices 2>/dev/null ; then
+ aliases=$(/sbin/modprobe -c | egrep -s "^alias[[:space:]]+usb-controller" | awk '{ print $3 }')
+ if [ -n "$aliases" -a "$aliases" != "off" ] ; then
+ /sbin/modprobe -k usbcore
+ run_cmd "Mounting USB filesystem" mount -t usbdevfs usbdevfs /proc/bus/usb
+ for alias in $aliases ; do
+ run_cmd "$(nls 'Initializing USB controller') ($alias)" /sbin/modprobe $alias
+ done
+ [ $? -eq 0 -a -n "$aliases" ] && usb=1
+ fi
+fi
+
+if ! grep -iq "nousb" /proc/cmdline 2>/dev/null && grep -q "usb" /proc/devices 2>/dev/null ; then
+ usb=1
+fi
+
+needusbstorage=
+if [ $usb = "1" ]; then
+ sleep 5
+ mouseoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02")
+ kbdoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01")
+ needusbstorage=$(cat /proc/bus/usb/devices 2>/dev/null|grep -e "^I.*Cls=08")
+ if [ -n "$kbdoutput" ] || [ -n "$mouseoutput" ]; then
+ run_cmd "Initializing USB HID interface" /sbin/modprobe hid 2> /dev/null
+ fi
+ if [ -n "$kbdoutput" ]; then
+ run_cmd "Initializing USB keyboard" /sbin/modprobe keybdev
+ fi
+ if [ -n "$mouseoutput" ]; then
+ run_cmd "Initializing USB mouse" /sbin/modprobe mousedev
+ fi
+fi
+
+if [ -f /fastboot ] || grep -iq "fastboot" /proc/cmdline 2> /dev/null ; then
+ fastboot=yes
+else
+ fastboot=
+fi
+
if [ -f /fsckoptions ]; then
- fsckoptions=`cat /fsckoptions`
+ fsckoptions=$(cat /fsckoptions)
else
fsckoptions=''
fi
fsckoptions="-f $fsckoptions"
fi
-# Test for NFS Root
-NFSROOT=`cat /proc/mounts | awk '{ if ($2 ~ /^\/$/ && $3 ~ /^nfs$/) print $3 }'`
+if is_yes "$COLOR_INIT"; then
+ fsckoptions="-C $fsckoptions"
+else
+ fsckoptions="-V $fsckoptions"
+fi
_RUN_QUOTACHECK=0
-if [ ! -f /fastboot -a ! -n "$NFSROOT" ]; then
- show "Checking root filesystems."; started
- initlog -c "fsck -C -T -a $fsckoptions /"
-
- rc=$?
-
- # A return of 2 or higher means there were serious problems.
- if [ $rc -gt 1 ]; then
- nls "\n\n*** An error occurred during the file system check.\n*** Dropping you to a shell; the system will reboot\n*** when you leave the shell.\n"
-
- PS1="`nls "(Repair filesystem) #"`"; export PS1
- if [ "$RUN_SULOGIN_ON_ERR" = "yes" ]; then
- sulogin
- else
- /bin/sh
- fi
-
- run_cmd "Unmounting file systems" umount -a
- mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress." reboot
- elif [ "$rc" = "1" ]; then
- _RUN_QUOTACHECK=1
- fi
+_ROOTFS_TYPE=$(grep " / " /proc/mounts | awk '{ print $3 }')
+
+if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" ]; then
+ show "Checking root filesystems."; started
+ initlog -c "fsck -T -a $fsckoptions /"
+
+ rc=$?
+
+ # A return of 2 or higher means there were serious problems.
+ if [ $rc -gt 1 ]; then
+ # don't use '\n' in nls macro !
+ echo
+ echo
+ nls "*** An error occurred during the file system check."
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ if is_yes "$RUN_SULOGIN_ON_ERR"; then
+ sulogin
+ else
+ /bin/sh
+ fi
+
+ run_cmd "Unmounting file systems" umount -a
+ mount -n -o remount,ro /
+ run_cmd "Automatic reboot in progress." reboot
+ elif [ "$rc" = "1" ]; then
+ _RUN_QUOTACHECK=1
+ fi
fi
# check for arguments
-if grep -i nopnp /proc/cmdline >/dev/null ; then
+if grep -iq nopnp /proc/cmdline; then
PNP=
else
PNP=yes
fi
-# set up pnp
-if [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
- if [ -n "$PNP" -a "$RUN_ISAPNP" = "yes" ]; then
- run_cmd "Setting up ISA PNP devices" /sbin/isapnp /etc/isapnp/isapnp.conf
+# set up pnp and kernel pnp
+if [ -n "$PNP" ]; then
+ if is_yes "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
+ run_cmd "Setting up ISA PNP devices (userspace pnp)" /sbin/isapnp /etc/isapnp/isapnp.conf
+ fi
+ if is_yes "$RUN_KERNELPNP"; then
+ /sbin/modprobe -k isa-pnp 2> /dev/null
+ if [ -e /proc/isapnp -a -f /etc/isapnp/isapnp-kernel.conf ]; then
+ show "Setting up ISA PNP devices (kernelspace pnp)"; busy
+ grep -v "^#" /etc/isapnp/isapnp-kernel.conf > /proc/isapnp && (deltext; ok) || (deltext; fail)
fi
+ fi
fi
# Remount the root filesystem read-write.
run_cmd "Remounting root filesystem in rw mode" mount -n -o remount,rw /
+# Clear mtab
+>/etc/mtab
+
+# Remove stale backups
+rm -f /etc/mtab~ /etc/mtab~~
+
+# Enter root, /proc and (potentially) /proc/bus/usb and devfs into mtab.
+mount -f /
+mount -f /proc
+[ -f /proc/bus/usb/devices ] && mount -f -t usbdevfs usbdevfs /proc/bus/usb
+[ -e /dev/.devfsd ] && mount -f -t devfs devfs /dev
+
+# Setup hdparm thing (if exists and is needed)
+if ! grep -iq nohdparm /proc/cmdline; then
+ [ -x /etc/rc.d/rc.hdparm ] && /etc/rc.d/rc.hdparm
+fi
+
# Update quotas if fsck was run on /.
-if [ X"$_RUN_QUOTACHECK" = "X1" -a -x /sbin/quotacheck -a ! -n "$NFSROOT" ]; then
- run_cmd "Checking root filesystem quotas" /sbin/quotacheck -v /
+if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
+ if [ -x /sbin/convertquota ]; then
+ if [ -f /quota.user ]; then
+ /sbin/convertquota -u / && rm -f /quota.user
+ fi
+ if [ -f /quota.group ]; then
+ /sbin/convertquota -g / && rm -f /quota.group
+ fi
+ fi
+ run_cmd "Checking root filesystem quotas" /sbin/quotacheck -v /
fi
# /etc/nologin when starting system
[ -f /etc/nologin.boot ] && rm -f /etc/nologin /etc/nologin.boot
-if [ "$DELAY_LOGIN" = "yes" -a ! -f /etc/nologin ]; then
+if is_yes "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then
show "Enabling Delay Login"; busy
echo > /etc/nologin
nls "System bootup in progress - please wait" >> /etc/nologin
echo >> /etc/nologin
chmod 644 /etc/nologin
cp -fp /etc/nologin /etc/nologin.boot
- deltext; ok
+ ok
fi
-echo ${HOSTNAME} > /etc/HOSTNAME
-
-# Clear mtab
->/etc/mtab
-
-# Enter root and /proc into mtab.
-mount -f /
-mount -f /proc
-
-if ! grep -i nomodules /proc/cmdline >/dev/null && [ -f /proc/ksyms ]; then
+# The root filesystem is now read-write, so we can now log via
+# syslog() directly..
+if [ -n "$IN_INITLOG" ]; then
+ IN_INITLOG=
+fi
+
+if [ ! -f /proc/modules ]; then
+ USEMODULES=
+elif ! grep -iq nomodules /proc/cmdline; then
USEMODULES=y
else
USEMODULES=
fi
-# Kernel dependent links
-rm -f /lib/modules/preferred
-rm -f /lib/modules/default
-if [ -x /sbin/depmod -a -n "$USEMODULES" ]; then
- if [ "$SET_SLINKS" != "no" ]; then
- # Get ready for kmod if module support in the kernel
- if [ -z `uname -r | grep "-"` ]; then
- # we're using a new kernel, no preferred needed
- mver=`uname -r`
- else
- ktag="`cat /proc/version`"
- mtag=grep -l "$ktag" /lib/modules/*/.rhkmvtag 2> /dev/null
- if [ -n "$mtag" ]; then
- mver=echo $mtag | sed -e 's,/lib/modules/,,' -e 's, \
- /.rhkmvtag,,' -e 's,[ ].*$,,'
- fi
- if [ -n "$mver" ]; then
- ln -sf /lib/modules/$mver /lib/modules/default
- fi
- fi
- fi
- [ -n "$mver" -a -f "/boot/module-info-$mver" ] && \
- ln -sf /boot/module-info-$mver /boot/module-info
- [ -n "$mver" -a -f "/boot/System.map-$mver" ] && \
- ln -sf /boot/System.map-$mver /boot/System.map
-
- show "Finding module dependencies"; busy
- if (depmod -a 2>&1 | grep -q nresolved) then
- deltext; fail;
- else
- deltext; ok
- fi
+# Adjust symlinks as necessary in /boot to keep system services from
+# spewing messages about mismatched System maps and so on.
+if is_yes "$SET_SLINKS"; then
+ if [ -L /boot/System.map -a -r /boot/System.map-`uname -r` ] ; then
+ ln -s -f System.map-`uname -r` /boot/System.map
+ fi
+ if [ ! -e /boot/System.map -a -r /boot/System.map-`uname -r` ] ; then
+ ln -s -f System.map-`uname -r` /boot/System.map
+ fi
fi
-# load sound modules
-if [ -n "$USEMODULES" -a "$LOAD_SOUND" = "yes" ]; then
- if grep -s -q "^alias sound" /etc/modules.conf ; then
- run_cmd "Loading sound module" modprobe -s sound
- fi
- if grep -s -q "^alias midi" /etc/modules.conf ; then
- run_cmd "Loading midi module" modprobe -s midi
- fi
+# Run depmod if RUN_DEPMOD != "no" and:
+# a) user requested or RUN_DEPMOD="";
+# b) modules.dep is missing
+# c) modules.dep is older than /etc/modules.conf or /lib/modules/$mver
+_RUN_DEPMOD=0
+if ! is_no "$RUN_DEPMOD" && [ -n "$USEMODULES" ]; then
+ is_yes "$RUN_DEPMOD" && _RUN_DEPMOD=1
+ [ "$RUN_DEPMOD" = "ifmissing" -a ! -r /lib/modules/$mver/modules.dep ] && _RUN_DEPMOD=1
+ [ /lib/modules/$mver/modules.dep -ot /etc/modules.conf ] && _RUN_DEPMOD=1
+ [ /lib/modules/$mver/modules.dep -ot /lib/modules/$mver ] && _RUN_DEPMOD=1
+fi
+
+if [ "$_RUN_DEPMOD" = "1" ]; then
+ run_cmd "Finding module dependencies" depmod -a
+fi
+
+# Load sound modules iff they need persistent DMA buffers
+if grep -q "options sound dmabuf=1" /etc/modules.conf 2>/dev/null ; then
+ RETURN=0
+ alias=$(/sbin/modprobe -c | egrep -s "^alias[[:space:]]+sound[[:space:]]+" | awk '{ print $3 }')
+ if [ -n "$alias" -a "$alias" != "off" ] ; then
+ run_cmd "$(nls 'Loading sound module') ($alias)" /sbin/modprobe -k $alias
+ RETURN=$?
+ fi
+ alias=$(/sbin/modprobe -c | egrep -s "^alias[[:space:]]+sound-slot-0[[:space:]]+" | awk '{ print $3 }')
+ if [ -n "$alias" -a "$alias" != "off" ] ; then
+ run_cmd "$(nls 'Loading sound module') ($alias)" /sbin/modprobe -k $alias
+ RETURN=$?
+ fi
fi
if [ -f /proc/sys/kernel/modprobe ]; then
- # /proc/sys/kernel/modprobe indicates built-in kmod instead
- echo "/sbin/modprobe" > /proc/sys/kernel/modprobe
+ if [ -n "$USEMODULES" ]; then
+ sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
+ sysctl -w kernel.hotplug="/sbin/hotplug" >/dev/null 2>&1
+ else
+ # We used to set this to NULL, but that causes
+ # 'failed to exec' messages"
+ sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
+ sysctl -w kernel.hotplug="/bin/true" >/dev/null 2>&1
+ fi
fi
# Load modules
-if [ -f /etc/rc.d/rc.modules ]; then
- /etc/rc.d/rc.modules
+if [ -x /etc/rc.d/rc.modules ]; then
+ /etc/rc.d/rc.modules
+fi
+
+# Find and activate volume groups
+modprobe -s lvm-mod >/dev/null 2>&1
+if [ -e /proc/lvm -a -x /sbin/vgscan -a -x /sbin/vgchange -a -e /etc/lvmtab ]; then
+ run_cmd "Scanning for LVM volume groups" /sbin/vgscan && \
+ run_cmd "Activating LVM volume groups" /sbin/vgchange -a y
fi
+# Add raid devices
+if [ ! -f /proc/mdstat ]; then
+ modprobe -s md >/dev/null 2>&1
+fi
+
# Add raid devices
if [ -f /proc/mdstat -a -f /etc/raidtab ]; then
- show "Starting up RAID devices."; started
rc=0
- for i in `grep "raiddev" /etc/raidtab | awk '{print $2}'`
+ for i in $(grep -v "^#" /etc/raidtab | grep "raiddev" | awk '{print $2}')
do
- RAIDDEV=`basename $i`
- RAIDSTAT=`grep "^$RAIDDEV : active" /proc/mdstat`
+ RAIDDEV=$(basename $i)
+ RAIDSTAT=$(grep "^$RAIDDEV : active" /proc/mdstat)
+ show "Starting up RAID device %s" $RAIDDEV
+ busy
if [ -z "$RAIDSTAT" ]; then
# Try raidstart first...if that fails then
- # fall back to raid0run.
+ # fall back to raid0run and if that fails, too
+ # fall back to raidadd, raidrun.
RESULT=1
if [ -x /sbin/raidstart ]; then
/sbin/raidstart $i
fi
if [ $RESULT -gt 0 -a -x /sbin/raid0run ]; then
/sbin/raid0run $i
+ RESULT=$?
+ fi
+ if [ $RESULT -gt 0 -a -x /sbin/raidadd -a -x /sbin/raidrun ]; then
+ /sbin/raidadd $i
+ /sbin/raidrun $i
+ RESULT=$?
fi
+ if [ $RESULT -gt 0 ]; then
+ rc=1
+ fail
+ else
+ ok
+ fi
+ else
+ ok
fi
done
# A non-zero return means there were problems.
if [ $rc -gt 0 ]; then
show "Starting up RAID devices."; fail
- nls "\n\n*** An error occurred during the RAID startup\n*** Dropping you to a shell; the system will reboot\n*** when you leave the shell.\n"
-
- PS1="`nls "(RAID Repair) #"`"; export PS1
- if [ "$RUN_SULOGIN_ON_ERR" = "yes" ]; then
+ echo
+ echo
+ nls "*** An error occurred during the RAID startup"
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
+
+ PS1="$(nls '(RAID Repair)# ')"; export PS1
+ if is_yes "$RUN_SULOGIN_ON_ERR"; then
sulogin
else
/bin/sh
show "Starting up RAID devices."; ok
fi
+_RUN_QUOTACHECK=0
# Check filesystems
-if [ ! -f /fastboot ]; then
- show "Checking filesystems."; started
- initlog -c "fsck -C -T -R -A -a $fsckoptions"
+if [ -z "$fastboot" ] && ! grep -q nofsck /proc/cmdline; then
+ show "Checking filesystems"; started
+ initlog -c "fsck -T -R -A -a $fsckoptions"
rc=$?
# A return of 2 or higher means there were serious problems.
if [ $rc -gt 1 ]; then
- nls "\n\n*** An error occurred during the file system check.\n*** Dropping you to a shell; the system will reboot\n*** when you leave the shell.\n"
-
- PS1="`nls "(Repair filesystem) #"`"; export PS1
- if [ "$RUN_SULOGIN_ON_ERR" = "yes" ]; then
+ echo
+ echo
+ nls "*** An error occurred during the file system check."
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ if is_yes "$RUN_SULOGIN_ON_ERR"; then
sulogin
else
/bin/sh
run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
run_cmd "Automatic reboot in progress." reboot
elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
- run_cmd "Checking filesystem quotas" /sbin/quotacheck -v -R -a
+ _RUN_QUOTACHECK=1
fi
fi
# Mount all other filesystems (except for NFS and /proc, which is already
# mounted). Contrary to standard usage,
# filesystems are NOT unmounted in single user mode.
-run_cmd "Mounting local filesystems." mount -a -t nonfs,smbfs,ncpfs,proc
-
-# set the console font
-#if [ -x /sbin/setsysfont ]; then
-# show "Loading default system font"; busy
-# if (/sbin/setsysfont > /dev/null 2>&1); then deltext; ok; else deltext; fail; fi
-#fi
+run_cmd "Mounting local filesystems." mount -a -t nonfs,smbfs,ncpfs
+
+if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
+ if [ -x /sbin/convertquota ]; then
+ # try to convert old quotas
+ for mountpt in $(cat /etc/mtab | awk '$4 ~ /quota/{print $2}'); do
+ if [ -f "$mountpt/quota.user" ]; then
+ /sbin/convertquota -u $mountpt && \
+ rm -f $mountpt/quota.user
+ fi
+ if [ -f "$mountpt/quota.group" ]; then
+ /sbin/convertquota -g $mountpt && \
+ rm -f $mountpt/quota.group
+ fi
+ done
+ fi
+ run_cmd "Checking filesystem quotas" /sbin/quotacheck -v -R -a
+fi
+# Turn on quota
if [ -x /sbin/quotaon ]; then
- run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -a
+ run_cmd "Turning on user and group quotas for local filesystems" /sbin/quotaon -a
fi
-# Clean out /etc & /var/{run/*,log/{b,w}tmpx}}.
-rm -f /etc/mtab~ /fastboot /fsckoptions /forcefsck
-rm -f /var/run/utmp
-:>/var/run/utmpx
-chown root.utmp /var/run/utmpx
-chmod 0664 /var/run/utmpx
+# Turn on process accounting
+if [ -x /sbin/accton ] ; then
+ run_cmd "Turning on process accounting" /sbin/accton /var/log/pacct
+fi
-# Clean /tmp
-if [ "$CLEAN_TMP" = "yes" ]; then
- rm -rf /tmp/*
+# Set the clock if timezone definition wasn't available (eg. /usr not mounted)
+if is_yes "$TIME_SETUP_DELAYED"; then
+ if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
+ show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
+ fi
fi
-# Delete UUCP lock files.
-rm -f /var/lock/LCK*
+# Initialize the serial ports.
+if [ -f /etc/rc.d/rc.serial ]; then
+ . /etc/rc.d/rc.serial
+fi
-# Delete stale subsystem files.
-rm -f /var/lock/subsys/*
+if [ -f /proc/sys/kernel/panic -a "$PANIC_REBOOT_TIME" -gt "0" ]; then
+ show 'Setting %s seconds for kernel reboot after panic' "$PANIC_REBOOT_TIME"; busy
+ if (sysctl -w kernel.panic=$PANIC_REBOOT_TIME > /dev/null 2>&1); then ok; else fail; fi
+fi
-# Delete stale pam_console locks.
-rm -f /var/lock/console/*
-rm -f /var/lock/console.lock
+# Clean out /etc.
+rm -f /fastboot /fsckoptions /forcefsck /halt /poweroff
+
+# Clean up /var
+# I'd use find, but /usr may not be mounted.
+for afile in /var/lock/* /var/run/*; do
+ if [ -d "$afile" ]; then
+ bafile=$(basename $afile)
+ [ "$bafile" != "news" -a "$bafile" != "sudo" -a "$bafile" != "mon" ] && rm -f $afile/*
+ else
+ rm -f $afile
+ fi
+done
+
+{
+# Clean up utmp/wtmp
+rm -f /var/run/utmp?
+if ! is_no "$NEED_XFILES" ; then
+ :>/var/run/utmpx
+ touch /var/log/wtmpx
+ chown root.utmp /var/run/utmpx /var/log/wtmpx
+ chmod 0664 /var/run/utmpx /var/log/wtmpx
+else
+ :>/var/run/utmp
+ touch /var/log/wtmp
+ chown root.utmp /var/run/utmp /var/log/wtmp
+ chmod 0664 /var/run/utmp /var/log/wtmp
+fi
-# Delete stale pid files
-rm -f /var/run/*.pid
-rm -f /var/spool/postoffice/.pid.*
+# Clean /tmp
+if is_yes "$CLEAN_TMP"; then
+ rm -rf /tmp/*
+fi
# Delete X locks
rm -f /tmp/.X*-lock
# Delete Postgres sockets
rm -f /tmp/.s.PGSQL.*
-# Set the system clock.
-show "Setting clock"; busy
-
-ARC=0
-UTC=0
-if [ -f /etc/sysconfig/clock ]; then
- . /etc/sysconfig/clock
-
- # convert old style clock config to new values
- if [ "${CLOCKMODE}" = "GMT" ]; then
- UTC=true
- elif [ "${CLOCKMODE}" = "ARC" ]; then
- ARC=true
- fi
-fi
-
-if [ -x /sbin/hwclock ]; then
- CLOCKFLAGS="--hctosys"
- CLOCK=/sbin/hwclock
-else
- CLOCKFLAGS="-a"
- CLOCK=/sbin/clock
-fi
-
-case "$UTC" in
- yes|true)
- CLOCKFLAGS="$CLOCKFLAGS -u";
-# echo -n " (utc)"
- ;;
-esac
-
-case "$ARC" in
- yes|true)
- CLOCKFLAGS="$CLOCKFLAGS -A";
-# echo -n " (arc)"
- ;;
-esac
-
-#echo -n ": "
-if ($CLOCK $CLOCKFLAGS); then deltext; ok; else deltext; fail; fi
-
-show "`nls "Date set to"` `date`"; ok
-
# Right, now turn on swap in case we swap to files.
swapon -a >/dev/null 2>&1
run_cmd "Enabling swap space" /bin/true
-#show "Enabling swap space"; busy
-#if [ "`LANG=C swapon -a 2>&1 | grep -v "busy"`" = "" ]; then
-# deltext; ok
-#else
-# deltext; fail
-#fi
-
-# Initialize the serial ports.
-if [ -f /etc/rc.d/rc.serial ]; then
- . /etc/rc.d/rc.serial
-fi
# If a SCSI tape has been detected, load the st module unconditionally
# since many SCSI tapes don't deal well with st being loaded and unloaded
-if [ -f /proc/scsi/scsi ] && cat /proc/scsi/scsi | grep -q 'Type: Sequential-Access' 2>/dev/null ; then
- if cat /proc/devices | grep -qv ' 9 st' ; then
- if [ -n "$USEMODULES" ] ; then
- # Try to load the module. If it fails, ignore it...
- insmod -p st >/dev/null 2>&1 && modprobe -s st >/dev/null 2>&1
- fi
- fi
+if [ -f /proc/scsi/scsi ] && grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
+ if grep -qv ' 9 st' /proc/devices ; then
+ if [ -n "$USEMODULES" ] ; then
+ # Try to load the module. If it fails, ignore it...
+ insmod -p st >/dev/null 2>&1 && /sbin/modprobe st >/dev/null 2>&1
+ fi
+ fi
fi
-# there could be a new kernel version. reinit /etc/psdevtab, to be sure.
-rm -f /etc/psdevtab
-#if [ -x /bin/ps ]; then
-#show "Rebuilding /etc/psdevtab database"; busy
-#if (ps > /dev/null 2>&1); then deltext; ok; else deltext; fail; fi
-#fi
+# Load usb storage here, to match most other things
+if [ -n "$needusbstorage" ]; then
+ /sbin/modprobe usb-storage >/dev/null 2>&1
+fi
-if ([ -f /proc/sys/kernel/panic -a "$PANIC_REBOOT_TIME" -gt "0" ] 2>/dev/null); then
-show "`nls "Sending val. %s to /proc/sys/kernel/panic" "$PANIC_REBOOT_TIME"`"; busy
-if (echo $PANIC_REBOOT_TIME > /proc/sys/kernel/panic); then deltext; ok; else deltext; fail; fi
+# If they asked for ide-scsi, load it
+if grep -q "ide-scsi" /proc/cmdline ; then
+ /sbin/modprobe -k ide-cd >/dev/null 2>&1
+ /sbin/modprobe -k ide-scsi >/dev/null 2>&1
fi
+# Adjust symlinks as necessary in /boot to keep system services from
+# spewing messages about mismatched System maps and so on.
+if [ -L /boot/System.map -a -r /boot/System.map-`uname -r` ] ; then
+ ln -s -f System.map-`uname -r` /boot/System.map
+fi
+if [ ! -e /boot/System.map -a -r /boot/System.map-`uname -r` ] ; then
+ ln -s -f System.map-`uname -r` /boot/System.map
+fi
+
+# there could be a new kernel version. remove old psdevtab database
+rm -f /etc/psdevtab
+
# Now that we have all of our basic modules loaded and the kernel going,
# let's dump the syslog ring somewhere so we can find it later
dmesg > /var/log/dmesg
chmod 640 /var/log/dmesg
+sleep 1
+
+# Now that we have all of our basic modules loaded and the kernel going,
+# let's dump the syslog ring somewhere so we can find it later
+kill -TERM $(/sbin/pidof getkey) >/dev/null 2>&1
+} &
+if is_yes "$PROMPT"; then
+ /sbin/getkey i && touch /var/run/confirm
+fi
+wait
+echo
+
+# This must be last line !
+# vi:syntax=sh:tw=78:ts=8:sw=4
-# Feed entropy into the entropy pool
-/etc/rc.d/init.d/random start
projects / projects / rc-scripts.git / blobdiff