#!/bin/sh
#
# /etc/rc.d/rc.sysinit - run once at boot time
-# $Id: rc.sysinit,v 1.30 1999/09/28 14:23:07 kloczek Exp $
+# $Id: rc.sysinit,v 1.78 2001/05/15 16:03:36 baggins Exp $
#
# Taken in part from Miquel van Smoorenburg's bcheckrc.
# Changes: Arkadiusz Mi¶kiewicz <misiek@pld.org.pl>
export PATH
# NLS
-if [ -f /etc/sysconfig/i18n ]; then
+if [ -r /etc/sysconfig/i18n ]; then
. /etc/sysconfig/i18n
[ -n "$LANG" ] && export LANG || unset LANG
[ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE
[ -n "$LINGUAS" ] && export LINGUAS || unset LINGUAS
fi
-
# Read functions
. /etc/rc.d/init.d/functions
# Read network config data.
-if [ -f /etc/sysconfig/network ]; then
+if [ -r /etc/sysconfig/network ]; then
. /etc/sysconfig/network
else
NETWORKING=no
fi
# Read system config data.
-if [ -f /etc/sysconfig/system ]; then
+if [ -r /etc/sysconfig/system ]; then
. /etc/sysconfig/system
else
RUN_SULOGIN_ON_ERR=yes
CONSOLE_LOGLEVEL=1
LOAD_SOUND=yes
SET_SLINKS=yes
+ RUN_LDCONFIG=yes
+fi
+
+# Print welcome message
+nls "\t\t\t%sPowered by %sPLD GNU/Linux%s" "$(termput setaf 6)" "$(termput setaf 2)" "$(termput setaf 7)"
+if is_yes "$PROMPT"; then
+ nls -n "\t\t Press %sI%s to enter interactive startup." "$(termput setaf 1)" "$(termput setaf 7)"
+ echo
+ sleep 1
+fi
+
+# we need /proc mounted before everything
+mount -n -o gid=17 -t proc /proc /proc
+
+# /dev must be also mounted before everything but only if we want use them ;-)
+if is_yes "$MOUNT_DEVFS"; then
+ run_cmd "Mounting Device Filesystem" mount -n -t devfs /dev /dev
+fi
+
+# set up devfsd
+if is_yes "$RUN_DEVFSD"; then
+ if [ -x /sbin/devfsd -a -f /etc/devfsd.conf ]; then
+ run_cmd "Starting Device Filesystem Daemon" /sbin/devfsd /dev
+ fi
fi
# Set console loglevel
-/sbin/loglevel $CONSOLE_LOGLEVEL
+/bin/dmesg -n $CONSOLE_LOGLEVEL
+
+# Configure Linux kernel
+run_cmd "Configuring kernel parameters" /sbin/sysctl -p /etc/sysctl.conf
+
+# Set the system clock.
+ARC=0
+SRM=0
+UTC=0
+
+if [ -f /etc/sysconfig/clock ]; then
+ . /etc/sysconfig/clock
+
+ # convert old style clock config to new values
+ if [ "${CLOCKMODE}" = "GMT" ]; then
+ UTC=true
+ elif [ "${CLOCKMODE}" = "ARC" ]; then
+ ARC=true
+ fi
+fi
+
+if grep "system serial" /proc/cpuinfo | grep -q MILO ; then
+ ARC=true
+fi
+
+CLOCKDEF=""
+CLOCKFLAGS="--hctosys"
+
+case "$UTC" in
+ yes|true)
+ CLOCKFLAGS="$CLOCKFLAGS --utc";
+ CLOCKDEF="$CLOCKDEF (utc)";
+ ;;
+ *)
+ CLOCKFLAGS="$CLOCKFLAGS --localtime";
+ CLOCKDEF="$CLOCKDEF (local)";
+ ;;
+esac
+
+case "$ARC" in
+ yes|true)
+ CLOCKFLAGS="$CLOCKFLAGS -A";
+ CLOCKDEF="$CLOCKDEF (arc)";
+ ;;
+esac
+case "$SRM" in
+ yes|true)
+ CLOCKFLAGS="$CLOCKFLAGS -S";
+ CLOCKDEF="$CLOCKDEF (srm)";
+ ;;
+esac
+
+# Check if timezone definition is available
+if [ -e /etc/localtime ] ; then
+ if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
+ show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
+ fi
+else
+ TIME_SETUP_DELAYED=yes
+fi
# Start up swapping.
-run_cmd "`nls "Activating swap partitions"`" swapon -a
+run_cmd "Activating swap partitions" swapon -a
# Set the hostname.
-run_cmd "`nls "Host:"` ${HOSTNAME}" hostname ${HOSTNAME}
+run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME}
# Set the NIS domain name
if [ -n "$NISDOMAIN" ]; then
- run_cmd "`nls "NIS Domain:"` ${NISDOMAIN}" domainname $NISDOMAIN
+ run_cmd "$(nls 'NIS Domain:') ${NISDOMAIN}" domainname $NISDOMAIN
else
domainname ""
fi
+# Setup hdparm thing (if exists and is needed)
+if ! grep -iq nohdparm /proc/cmdline; then
+ [ -x /etc/rc.d/rc.hdparm ] && /etc/rc.d/rc.hdparm
+fi
+
if [ -f /fsckoptions ]; then
- fsckoptions=`cat /fsckoptions`
+ fsckoptions=$(cat /fsckoptions)
else
fsckoptions=''
fi
fsckoptions="-f $fsckoptions"
fi
-# we need /proc mounted before starting fsck
-mount -t proc /proc /proc
-
-# Test for NFS Root
-NFSROOT=`cat /proc/mounts | awk '{ if ($2 ~ /^\/$/ && $3 ~ /^nfs$/) print $3 }'`
-
_RUN_QUOTACHECK=0
-if [ ! -f /fastboot ] && [ ! -n "$NFSROOT" ]; then
- show "Checking root filesystems."; started
- initlog -c "fsck -T -a $fsckoptions /"
-
- rc=$?
-
- # A return of 2 or higher means there were serious problems.
- if [ $rc -gt 1 ]; then
- nls "\n\n*** An error occurred during the file system check.\n*** Dropping you to a shell; the system will reboot\n*** when you leave the shell.\n"
-
- PS1="`nls "(Repair filesystem) #"`"; export PS1
- if [ "$RUN_SULOGIN_ON_ERR" == "yes" ]; then
- sulogin
- else
- /bin/sh
- fi
+if awk '{ if ($2 ~ /^\/$/ && ( $3 ~ /^(nfs|romfs)$/ || $6 ~ /^0$/ ) ) exit 1 ; else exit 0}' /etc/fstab; then
+
+ if [ ! -f /fastboot ]; then
+ show "Checking root filesystems."; started
+ initlog -c "fsck -C -T -a $fsckoptions /"
+
+ rc=$?
+
+ # A return of 2 or higher means there were serious problems.
+ if [ $rc -gt 1 ]; then
+ # don't use '\n' in nls macro !
+ echo
+ echo
+ nls "*** An error occurred during the file system check."
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ if is_yes "$RUN_SULOGIN_ON_ERR"; then
+ sulogin
+ else
+ /bin/sh
+ fi
+
+ run_cmd "Unmounting file systems" umount -a
+ mount -n -o remount,ro /
+ run_cmd "Automatic reboot in progress." reboot
+ elif [ "$rc" = "1" ]; then
+ _RUN_QUOTACHECK=1
+ fi
+ fi
- run_cmd "Unmounting file systems" umount -a
- mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress." reboot
- elif [ "$rc" == "1" ]; then
- _RUN_QUOTACHECK=1
- fi
fi
# check for arguments
-if grep -i nopnp /proc/cmdline >/dev/null ; then
+if grep -iq nopnp /proc/cmdline; then
PNP=
else
PNP=yes
# set up pnp
if [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
- if [ -n "$PNP" ] && [ "$RUN_ISAPNP" == "yes" ]; then
+ if [ -n "$PNP" ] && is_yes "$RUN_ISAPNP"; then
run_cmd "Setting up ISA PNP devices" /sbin/isapnp /etc/isapnp/isapnp.conf
fi
fi
+
# Remount the root filesystem read-write.
run_cmd "Remounting root filesystem in rw mode" mount -n -o remount,rw /
# Update quotas if fsck was run on /.
-if [ X"$_RUN_QUOTACHECK" == "X1" -a -x /sbin/quotacheck ] && [ ! -n "$NFSROOT" ]; then
- run_cmd "Checking root filesystem quotas" /sbin/quotacheck -v /
+if [ X"$_RUN_QUOTACHECK" = "X1" -a -x /sbin/quotacheck ]; then
+ run_cmd "Checking root filesystem quotas" /sbin/quotacheck -vug /
fi
# /etc/nologin when starting system
[ -f /etc/nologin.boot ] && rm -f /etc/nologin /etc/nologin.boot
-if [ "$DELAY_LOGIN" == "yes" ] && [ ! -f /etc/nologin ]; then
+if is_yes "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then
show "Enabling Delay Login"; busy
echo > /etc/nologin
nls "System bootup in progress - please wait" >> /etc/nologin
echo >> /etc/nologin
chmod 644 /etc/nologin
cp -fp /etc/nologin /etc/nologin.boot
- deltext; ok
+ ok
fi
+# The root filesystem is now read-write, so we can now log via
+# syslog() directly..
+if [ -n "$IN_INITLOG" ]; then
+ IN_INITLOG=""
+fi
+
+echo ${HOSTNAME} > /etc/HOSTNAME
# Clear mtab
>/etc/mtab
# Enter root and /proc into mtab.
mount -f /
mount -f /proc
+[ -f /proc/bus/usb/devices ] && mount -f -t usbdevfs usbdevfs /proc/bus/usb
-if ! grep -i nomodules /proc/cmdline >/dev/null && [ -f /proc/ksyms ]; then
+if [ ! -f /proc/modules ]; then
+ USEMODULES=
+elif ! grep -iq nomodules /proc/cmdline; then
USEMODULES=y
else
USEMODULES=
rm -f /lib/modules/preferred
rm -f /lib/modules/default
if [ -x /sbin/depmod -a -n "$USEMODULES" ]; then
- if [ "$SET_SLINKS" != "no" ]; then
+ if is_yes "$SET_SLINKS"; then
# Get ready for kmod if module support in the kernel
- if [ -z `uname -r | grep "-"` ]; then
- # we're using a new kernel, no preferred needed
- mver=`uname -r`
+ if [ -z $(uname -r | grep "-") ]; then
+ # we're using a new kernel, no preferred needed
+ mver=$(uname -r)
else
- ktag="`cat /proc/version`"
- mtag=grep -l "$ktag" /lib/modules/*/.rhkmvtag 2> /dev/null
- if [ -n "$mtag" ]; then
- mver=echo $mtag | sed -e 's,/lib/modules/,,' -e 's,/.rhkmvtag,,' -e 's,[ ].*$,,'
- fi
- if [ -n "$mver" ]; then
- ln -sf /lib/modules/$mver /lib/modules/default
- fi
+ ktag="$(cat /proc/version)"
+ mtag=grep -l "$ktag" /lib/modules/*/.rhkmvtag 2> /dev/null
+ if [ -n "$mtag" ]; then
+ mver=$(echo $mtag | awk ' { gsub(/\/lib\/modules\//,NIL); gsub(/.rhkmvtag/,NIL); gsub(/[ ].*$/,NIL); print $0 } ')
+ fi
+ if [ -n "$mver" ]; then
+ ln -sf /lib/modules/$mver /lib/modules/default
+ fi
fi
- fi
- [ -n "$mver" -a -f "/boot/module-info-$mver" ] && ln -sf /boot/module-info-$mver /boot/module-info
- [ -n "$mver" -a -f "/boot/System.map-$mver" ] && ln -sf /boot/System.map-$mver /boot/System.map
- run_cmd "Finding module dependencies" depmod -a -s
+
+ [ -n "$mver" -a -f "/boot/module-info-$mver" ] && \
+ ln -sf /boot/module-info-$mver /boot/module-info
+ [ -n "$mver" -a -f "/boot/System.map-$mver" ] && \
+ ln -sf /boot/System.map-$mver /boot/System.map
+ fi
fi
-# load sound modules
-if [ -n "$USEMODULES" ] && [ "$LOAD_SOUND" == "yes" ]; then
- if grep -s -q "^alias sound" /etc/conf.modules ; then
- run_cmd "Loading sound module" modprobe -s sound
- fi
- if grep -s -q "^alias midi" /etc/conf.modules ; then
- run_cmd "Loading midi module" modprobe -s midi
- fi
+# Run depmod if RUN_DEPMOD != "no" and:
+# a) user requested or RUN_DEPMOD="";
+# b) modules.dep is missing
+# c) modules.dep is older than /etc/modules.conf or /lib/modules/$mver
+if ! is_no "$RUN_DEPMOD" && [ -n "$USEMODULES" ]; then
+ if is_yes "$RUN_DEPMOD" || [ -z "$RUN_DEPMOD" ] || \
+ [ "$RUN_DEPMOD" = "ifmissing" -a ! -r /lib/modules/$mver/modules.dep ] ||\
+ [ /lib/modules/$mver/modules.dep -ot /etc/modules.conf ] ||\
+ [ /lib/modules/$mver/modules.dep -ot /lib/modules/$mver ]; then
+ run_cmd "Finding module dependencies" depmod -a
+ fi
fi
if [ -f /proc/sys/kernel/modprobe ]; then
- # /proc/sys/kernel/modprobe indicates built-in kmod instead
- echo "/sbin/modprobe" > /proc/sys/kernel/modprobe
+ if [ -n "$USEMODULES" ]; then
+ sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
+ else
+ # We used to set this to NULL, but that causes
+ # 'failed to exec' messages"
+ sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
+ fi
fi
-# Add raid devices
-if [ -f /proc/mdstat -a -f /etc/raidtab -a -x /sbin/raidadd ]; then
- show "Starting up RAID devices."; busy
- initlog -c 'raidadd -a'
-
- rc=$?
- if [ $rc = 0 ]; then
- raidrun -a
- rc=$?
+# Load modules
+if [ -x /etc/rc.d/rc.modules ]; then
+ /etc/rc.d/rc.modules
+fi
+
+# load sound modules
+if [ -n "$USEMODULES" ] && is_yes "$LOAD_SOUND"; then
+ if grep -s -q "^alias sound-slot-0" /etc/modules.conf ; then
+ run_cmd "Loading sound module" modprobe -s sound-slot-0
+ fi
+ if grep -s -q "^alias synth0" /etc/modules.conf ; then
+ run_cmd "Loading synthesiser module" modprobe -s synth0
fi
+fi
+
+# Add raid devices
+if [ -f /proc/mdstat -a -f /etc/raidtab ]; then
+
+ rc=0
+
+ for i in $(grep "raiddev" /etc/raidtab | awk '{print $2}')
+ do
+ RAIDDEV=$(basename $i)
+ RAIDSTAT=$(grep "^$RAIDDEV : active" /proc/mdstat)
+ show "Starting up RAID device %s" $RAIDDEV
+ busy
+ if [ -z "$RAIDSTAT" ]; then
+ # Try raidstart first...if that fails then
+ # fall back to raid0run and if that fails, too
+ # fall back to raidadd, raidrun.
+ RESULT=1
+ if [ -x /sbin/raidstart ]; then
+ /sbin/raidstart $i
+ RESULT=$?
+ fi
+ if [ $RESULT -gt 0 -a -x /sbin/raid0run ]; then
+ /sbin/raid0run $i
+ RESULT=$?
+ fi
+ if [ $RESULT -gt 0 -a -x /sbin/raidadd -a -x /sbin/raidrun ]; then
+ /sbin/raidadd $i
+ /sbin/raidrun $i
+ RESULT=$?
+ fi
+ if [ $RESULT -gt 0 ]; then
+ rc=1
+ fail
+ else
+ ok
+ fi
+ else
+ ok
+ fi
+ done
# A non-zero return means there were problems.
if [ $rc -gt 0 ]; then
- deltext
- fail
- nls "\n\n*** An error occurred during the RAID startup\n*** Dropping you to a shell; the system will reboot\n*** when you leave the shell.\n"
-
- PS1="`nls "(RAID Repair) #"`"; export PS1
- if [ "$RUN_SULOGIN_ON_ERR" == "yes" ]; then
+ show "Starting up RAID devices."; fail
+ echo
+ echo
+ nls "*** An error occurred during the RAID startup"
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
+
+ PS1="$(nls '(RAID Repair)# ')"; export PS1
+ if is_yes "$RUN_SULOGIN_ON_ERR"; then
sulogin
else
/bin/sh
run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
run_cmd "Automatic reboot in progress" reboot
fi
- deltext
- ok
+ show "Starting up RAID devices."; ok
+fi
+
+# Find and activate volume groups
+if [ -e /proc/lvm -a -x /sbin/vgscan -a -x /sbin/vgchange ]; then
+ run_cmd "Scanning for LVM volume groups" /sbin/vgscan && \
+ run_cmd "Activating LVM volume groups" /sbin/vgchange -a y
fi
# Check filesystems
-if [ ! -f /fastboot ]; then
+if ! grep -q nofsck /proc/cmdline && [ ! -f /fastboot ]; then
show "Checking filesystems."; started
- initlog -c "fsck -T -R -A -a $fsckoptions"
+ initlog -c "fsck -C -T -R -A -a $fsckoptions"
rc=$?
# A return of 2 or higher means there were serious problems.
if [ $rc -gt 1 ]; then
- nls "\n\n*** An error occurred during the file system check.\n*** Dropping you to a shell; the system will reboot\n*** when you leave the shell.\n"
-
- PS1="`nls "(Repair filesystem) #"`"; export PS1
- if [ "$RUN_SULOGIN_ON_ERR" == "yes" ]; then
+ echo
+ echo
+ nls "*** An error occurred during the file system check."
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ if is_yes "$RUN_SULOGIN_ON_ERR"; then
sulogin
else
/bin/sh
run_cmd "Unmounting file systems" umount -a
run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
run_cmd "Automatic reboot in progress." reboot
- elif [ "$rc" == "1" -a -x /sbin/quotacheck ]; then
- run_cmd "Checking filesystem quotas" /sbin/quotacheck -v -R -a
+ elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
+ if [ -x /sbin/convertquota ]; then
+ if [ -f /quota.user ]; then
+ /sbin/convertquota -u / && rm -f /quota.user
+ fi
+ if [ -f /quota.group ]; then
+ /sbin/convertquota -g / && rm -f /quota.group
+ fi
+ fi
+ run_cmd "Checking filesystem quotas" /sbin/quotacheck -v -u -g -R -a
fi
fi
# filesystems are NOT unmounted in single user mode.
run_cmd "Mounting local filesystems." mount -a -t nonfs,smbfs,ncpfs,proc
-# set the console font
-#if [ -x /sbin/setsysfont ]; then
-# show "Loading default system font"; busy
-# if (/sbin/setsysfont > /dev/null 2>&1); then deltext; ok; else deltext; fail; fi
-#fi
+# Now do some workaround - encrypted filesystems couldn't have been fsck-ed
+# before mount - that's where the password is entered.
+# mount is buggy - when remounting loopback filesystem, loop=XXX
+# option is removed from /etc/mtab
+if grep -q "encryption=" /etc/fstab; then
+ show "Checking encrypted filesystems"; started
+ LOOPLIST="$(
+ grep "encryption=" /etc/fstab | grep -v 'noauto' | grep -w 'ro' |\
+ while read FILE DIR TYPE OPTS TMP1; do
+ LOOP="`cat /proc/mounts | awk '$2 == "'"$DIR"'" { print $1 }'`"
+ echo "$LOOP"
+ done
+ grep "encryption=" /etc/fstab | grep -vw 'ro\|noauto' |\
+ while read FILE DIR TYPE OPTS TMP1; do
+ LOOP="`cat /proc/mounts | awk '$2 == "'"$DIR"'" { print $1 }'`"
+ LOOPLIST="$LOOPLIST $LOOP"
+ NEWOPTS="remount,`echo "$OPTS" | sed 's#loop\(=[^,]*\)\?#loop='"$LOOP"'#'`,ro"
+ echo "$LOOP"
+ mount "$DIR" -o "$NEWOPTS"
+ done
+ )"
+
+ initlog -c "fsck -T -C -a $fsckoptions $LOOPLIST"
+ rc=$?
+
+ # A return of 2 or higher means there were serious problems.
+ if [ $rc -gt 1 ]; then
+ echo "\n\n"
+ nls "*** An error occurred during the file system check."
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
+
+ PS1="`nls '(Repair filesystem)# '`"; export PS1
+ if is_yes "$RUN_SULOGIN_ON_ERR"; then
+ sulogin
+ else
+ /bin/sh
+ fi
+
+ run_cmd "Unmounting file systems" umount -a
+ run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
+ run_cmd "Automatic reboot in progress." reboot
+ fi
+
+ show "Remounting encrypted filesystems back in rw mode"; busy
+ grep "encryption=" /etc/fstab | grep -vw 'ro\|noauto' |\
+ while read FILE DIR TYPE OPTS TMP1; do
+ LOOP="`cat /proc/mounts | awk '$2 == "'"$DIR"'" { print $1 }'`"
+ NEWOPTS="remount,`echo "$OPTS" | sed 's#loop\(=[^,]*\)\?#loop='"$LOOP"'#'`,rw"
+ mount "$DIR" -o "$NEWOPTS"
+ done
+ ok
+fi
+
+# Set the clock if timezone definition wasn't available (eg. /usr not mounted)
+if is_yes "$TIME_SETUP_DELAYED"; then
+ if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
+ show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
+ fi
+fi
if [ -x /sbin/quotaon ]; then
run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -a
fi
+# Initialize the serial ports.
+if [ -f /etc/rc.d/rc.serial ]; then
+ . /etc/rc.d/rc.serial
+fi
+
+if [ -f /proc/sys/kernel/panic -a "$PANIC_REBOOT_TIME" -gt "0" ]; then
+ show "Setting %s seconds for kernel reboot after panic." "$PANIC_REBOOT_TIME"; busy
+ if (sysctl -w kernel.panic=$PANIC_REBOOT_TIME 2> /dev/null); then ok; else fail; fi
+fi
+
# Clean out /etc & /var/{run/*,log/{b,w}tmpx}}.
rm -f /etc/mtab~ /fastboot /fsckoptions /forcefsck
-rm -f /var/run/utmp
-:>/var/run/utmpx
-chown root.utmp /var/run/utmpx
-chmod 0664 /var/run/utmpx /var/log/wtmpx
+
+{
+# Clean up utmp/wtmp
+rm -f /var/run/utmp?
+if ! is_no "$NEED_XFILES" ; then
+ :>/var/run/utmpx
+ touch /var/log/wtmpx
+ chown root.utmp /var/run/utmpx /var/log/wtmpx
+ chmod 0664 /var/run/utmpx /var/log/wtmpx
+else
+ :>/var/run/utmp
+ touch /var/log/wtmp
+ chown root.utmp /var/run/utmp /var/log/wtmp
+ chmod 0664 /var/run/utmp /var/log/wtmp
+fi
# Clean /tmp
-if [ "$CLEAN_TMP" == "yes" ]; then
+if is_yes "$CLEAN_TMP"; then
rm -rf /tmp/*
fi
# Delete Postgres sockets
rm -f /tmp/.s.PGSQL.*
-# Set the system clock.
-show "Setting clock"; busy
-
-ARC=0
-UTC=0
-if [ -f /etc/sysconfig/clock ]; then
- . /etc/sysconfig/clock
-
- # convert old style clock config to new values
- if [ "${CLOCKMODE}" == "GMT" ]; then
- UTC=true
- elif [ "${CLOCKMODE}" == "ARC" ]; then
- ARC=true
- fi
-fi
-
-if [ -x /sbin/hwclock ]; then
- CLOCKFLAGS="--hctosys"
- CLOCK=/sbin/hwclock
-else
- CLOCKFLAGS="-a"
- CLOCK=/sbin/clock
-fi
-
-case "$UTC" in
- yes|true)
- CLOCKFLAGS="$CLOCKFLAGS -u";
-# echo -n " (utc)"
- ;;
-esac
-
-case "$ARC" in
- yes|true)
- CLOCKFLAGS="$CLOCKFLAGS -A";
-# echo -n " (arc)"
- ;;
-esac
-
-#echo -n ": "
-if ($CLOCK $CLOCKFLAGS); then deltext; ok; else deltext; fail; fi
-
-show "`nls "Date set to"` `date`"; ok
-
# Right, now turn on swap in case we swap to files.
-show "Enabling swap space"; busy
-if [ "`LANG=C swapon -a 2>&1 | grep -v "busy"`" == "" ]; then
- deltext; ok
-else
- deltext; fail
-fi
-
-# Initialize the serial ports.
-if [ -f /etc/rc.d/rc.serial ]; then
- . /etc/rc.d/rc.serial
-fi
+swapon -a >/dev/null 2>&1
+run_cmd "Enabling swap space" /bin/true
# If a SCSI tape has been detected, load the st module unconditionally
# since many SCSI tapes don't deal well with st being loaded and unloaded
fi
fi
-# there could be a new kernel version. reinit /etc/psdevtab, to be sure.
+# there could be a new kernel version. remove old psdevtab database
rm -f /etc/psdevtab
-#if [ -x /bin/ps ]; then
-#show "Rebuilding /etc/psdevtab database"; busy
-#if (ps > /dev/null 2>&1); then deltext; ok; else deltext; fail; fi
-#fi
-
-if [ -x /sbin/ldconfig ]; then
-run_cmd "Setting up /etc/ld.so.cache" /sbin/ldconfig -X
-fi
-
-if ([ -f /proc/sys/kernel/panic ] && [ "$PANIC_REBOOT_TIME" -gt "0" ] 2>/dev/null); then
-show "`nls "Sending val. %s to /proc/sys/kernel/panic" "$PANIC_REBOOT_TIME"`"; busy
-if (echo $PANIC_REBOOT_TIME > /proc/sys/kernel/panic); then deltext; ok; else deltext; fail; fi
-fi
# Now that we have all of our basic modules loaded and the kernel going,
# let's dump the syslog ring somewhere so we can find it later
dmesg > /var/log/dmesg
chmod 640 /var/log/dmesg
-# Feed entropy into the entropy pool
-/etc/rc.d/init.d/random start
+# Now that we have all of our basic modules loaded and the kernel going,
+# let's dump the syslog ring somewhere so we can find it later
+kill -TERM $(/sbin/pidof getkey) >/dev/null 2>&1
+} &
+if is_yes "$PROMPT"; then
+ /sbin/getkey i && touch /var/run/confirm
+fi
+wait
+echo
+
+# This must be last line !
+# vi:syntax=sh:tw=78:ts=8:sw=4
projects / projects / rc-scripts.git / blobdiff