# $Id$
#
# Taken in part from Miquel van Smoorenburg's bcheckrc.
-# Changes: Arkadiusz Mi¶kiewicz <misiek@pld-linux.org>
#
-# Set the path
-PATH=/bin:/sbin:/usr/bin:/usr/sbin
-export PATH
-
# reasonable start values for bootsplash progress.
export progress=0
export sscripts=45
export kscripts=45
-# we need /proc mounted before everything
-mount -n -o gid=17 -t proc /proc /proc
-
# NLS
if [ -r /etc/sysconfig/i18n ]; then
. /etc/sysconfig/i18n
HOSTNAME=localhost
fi
-# Read system config data
-if [ -r /etc/sysconfig/system ]; then
- . /etc/sysconfig/system
-else
- RUN_SULOGIN_ON_ERR=yes
- RUN_USERPNP=yes
- RUN_KERNELPNP=yes
- PANIC_REBOOT_TIME=0
- DELAY_LOGIN=yes
- CLEAN_TMP=no
- CONSOLE_LOGLEVEL=1
- SET_SLINKS=yes
- RUN_LDCONFIG=yes
-fi
+CONSOLE_LOGLEVEL=1
# Read functions
-. /etc/rc.d/init.d/functions
+. /lib/rc-scripts/functions
-# sysfs is also needed before any other things (under kernel > 2.5)
-if ! is_yes "$VSERVER" && grep -q sysfs /proc/filesystems 2>/dev/null ; then
- mount -n -o gid=17 -t sysfs sysfs /sys
- if [ "$(kernelver)" -ge "002006014" ] && \
- grep -q securityfs /proc/filesystems 2>/dev/null ; then
- mount -n -o gid=17 -t securityfs securityfs /sys/kernel/security
+modprobe_c_cache=""
+modprobe_c() {
+ if [ "$modprobe_c_cache" ]; then
+ echo "$modprobe_c_cache"
+ return
fi
-
-fi
+ modprobe_c_cache=$(modprobe -c)
+}
+
+# parse kernel cmdline
+# needs /proc mounted
+parse_cmdline() {
+ read cmdline < /proc/cmdline
+ local arg
+
+ for arg in $cmdline; do
+ case "$arg" in
+ pld.no-upstart)
+ # default is set in /etc/sysconfig/system or detected in init.d/functions
+ USE_UPSTART=no
+ ;;
+ noudev)
+ # default is set in /etc/sysconfig/system
+ START_UDEV=no
+ ;;
+ nomdadm)
+ # default is set in /etc/sysconfig/system
+ MDADM=no
+ ;;
+ nomultipath)
+ # default is set in /etc/sysconfig/system
+ DM_MULTIPATH=no
+ ;;
+ nousb)
+ nousb=1
+ ;;
+ nohdparm)
+ nohdparm=1
+ ;;
+ fastboot)
+ fastboot=1
+ ;;
+ nopnp)
+ nopnp=1
+ ;;
+ nomodules)
+ nomodules=1
+ ;;
+ nofirewire)
+ nofirewire=1
+ ;;
+ nofsck)
+ nofsck=1
+ ;;
+ esac
+ done
+}
+
+disable_selinux() {
+ local _d selinuxfs _t _r
+
+ while read _d selinuxfs _t _r; do
+ [ "$_t" = "selinuxfs" ] && break
+ done </proc/mounts
+ echo "*** Warning -- SELinux is active"
+ echo "*** Disabling security enforcement for system recovery."
+ echo "*** Run 'setenforce 1' to reenable."
+ echo "0" > $selinuxfs/enforce
+}
+
+relabel_selinux() {
+ local _d selinuxfs _t _r
+
+ while read _d selinuxfs _t _r; do
+ [ "$_t" = "selinuxfs" ] && break
+ done </proc/mounts
+ echo "
+ *** Warning -- SELinux relabel is required. ***
+ *** Disabling security enforcement. ***
+ *** Relabeling could take a very long time, ***
+ *** depending on file system size. ***
+ "
+ echo "0" > $selinuxfs/enforce
+ /sbin/fixfiles -F relabel > /dev/null 2>&1
+ rm -f /.autorelabel
+ echo "*** Enabling security enforcement. ***"
+ echo $SELINUX > $selinuxfs/enforce
+}
+
+# Remove duplicate entries from mtab (for vserver guest use only)
+clean_vserver_mtab() {
+ > /etc/mtab.clean
+ while read device mountpoint line; do
+ grep -qs "$mountpoint" /etc/mtab.clean || \
+ echo "$device $mountpoint $line" >> /etc/mtab.clean
+ done < /etc/mtab
+ cat /etc/mtab.clean > /etc/mtab
+ rm -f /etc/mtab.clean
+}
+
+# Loads modules from /etc/modules, /etc/modules.X.Y and /etc/modules.X.Y.Z
+load_kernel_modules() {
+ local modules_file=$1
+ local _x _y _z v v1 old_IFS kernel kerneleq
+ {
+ read _x _y v _z
+ old_IFS=$IFS
+ # strip _* or -* from versions like: "2.6.25_vanilla-1", "2.6.25-1"
+ IFS='_-'
+ set -- $v
+ v1=${1}
+ IFS='.'
+ set -- $v1
+ IFS=$old_IFS
+
+ kernel="$1.$2"
+ kerneleq="$1.$2.$3"
+ } < /proc/version
+
+ local module args
+ # Loop over every line in modules file
+ ( \
+ grep -hvE '^(#|[[:blank:]]*$)' /etc/$modules_file /etc/$modules_file.$kernel /etc/$modules_file.$kerneleq 2>/dev/null
+ echo '' # make sure there is a LF at the end
+ ) | while read module args; do
+ [ -z "$module" ] && continue
+ # strip comments
+ args=${args%%#*}
+ show "Loading %s kernel module(s)" "$module"
+ busy
+ modprobe -s $module -- $args && ok || fail
+ done
+}
-# selinux
-if ! is_yes "$VSERVER" && grep -q selinuxfs /proc/filesystems 2>/dev/null && ! grep -q selinuxfs /proc/mounts 2>/dev/null; then
- mount -n -o gid=17 -t selinuxfs selinuxfs /selinux
-fi
+# launch repair shell
+# which after exiting will reboot
+repair_shell() {
+ local reason="$2"
-if [ $(kernelverser) = "002006" ]; then
- MODULES_CONF=/etc/modprobe.conf
-elif [ -r /etc/modules.conf ]; then
- MODULES_CONF=/etc/modules.conf
-else
- MODULES_CONF=/etc/conf.modules
-fi
+ # don't use '\n' in nls macro !
+ echo
+ echo
+ echo "$reason"
+ nls "*** Dropping you to a shell; the system will reboot"
+ nls "*** when you leave the shell."
+ echo
-# PLD LiveCD support
-if [ -x /etc/rc.d/rc.live ]; then
- /etc/rc.d/rc.live
-fi
+ [ "$SELINUX" = "1" ] && disable_selinux
+ if ! is_no "$RUN_SULOGIN_ON_ERR"; then
+ /sbin/sulogin
+ else
+ /bin/sh
+ fi
-# Choose Hardware profile
-if [ -f /etc/sysconfig/hwprof ]; then
- . /etc/sysconfig/hwprof
- if is_yes "${HWPROFILES}" && [ -x /sbin/hwprofile -a -d /etc/sysconfig/hwprofiles/data ]; then
- mount -n / -o rw,remount
- /sbin/hwprofile -qf
- mount -n / -o ro,remount
+ run_cmd "Unmounting file systems" umount -a
+ run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
+ run_cmd "Automatic reboot in progress" reboot
+}
+
+check_root_fs() {
+ show "Checking root filesystem"; started
+ initlog -c "fsck -C -T -a $fsckoptions /"
+ rc=$?
+
+ # A return of 4 or higher means there were serious problems.
+ if [ $rc -gt 3 ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ repair_shell "$(nls '*** An error occurred during the file system check.')"
+
+ # A return of 2 or 3 means that filesystem was repaired but we need
+ # to reboot.
+ elif [ "$rc" = "2" -o "$rc" = "3" ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+ echo
+ nls "*** Filesystem was repaired but system needs to be"
+ nls "*** rebooted before mounting it."
+ nls "*** REBOOTING ***"
+ echo
+
+ run_cmd "Unmounting file systems" umount -a
+ mount -n -o remount,ro /
+ run_cmd "Automatic reboot in progress" reboot
+ elif [ "$rc" = "1" ]; then
+ _RUN_QUOTACHECK=1
fi
-fi
+}
+
+# Add raid devices
+init_mdadm() {
+ if [ ! -x /sbin/mdadm -o ! -f /etc/mdadm.conf ]; then
+ return
+ fi
+
+ modprobe -s md
+ local rc=0
+ if [ -f /proc/mdstat ]; then
+ golvm=0
+
+ if grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf; then
+ show "Starting up RAID devices"; busy
+ /sbin/mdadm --assemble --scan --auto=yes
+ rc=$?
+ if [ "$rc" -eq 0 -o "$rc" -eq 2 ]; then
+ # rc is used later, too so set sane value
+ rc=0
+ deltext; ok
+ golvm=1
+ else
+ deltext; fail
+ fi
+
+ fi
-# Disable splash when requested
-[ -e /proc/splash ] && is_no "$BOOT_SPLASH" && echo "0" > /proc/splash
+ # A non-zero return means there were problems
+ if [ $rc -gt 0 ]; then
+ [ -e /proc/splash ] && echo "verbose" > /proc/splash
+ show "Starting up RAID devices"; fail
+
+ PS1="$(nls '(RAID Repair)# ')"; export PS1
+ repair_shell "$(nls '*** An error occurred during the RAID startup.')"
+ fi
+
+ # LVM on RAID (keep in sync with LVM init)
+ if [ "$golvm" -eq "1" ]; then
+ if [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
+ run_cmd "Scanning for LVM volume groups (on RAID)" /sbin/vgscan $lvmignorelocking
+ run_cmd "Activating LVM volume groups (on RAID)" /sbin/vgchange -a y $lvmsysinit
+ [ "$lvmversion" = "2" ] && /sbin/vgmknodes
+ fi
+ fi
+ show "Starting up RAID devices"; ok
+ fi
+ return $rc
+}
-# Check SELinux status
-selinuxfs=$(awk '/ selinuxfs / { print $2 }' /proc/mounts)
-SELINUX=
-if [ -n "$selinuxfs" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
- if [ -r $selinuxfs/enforce ] ; then
- SELINUX=$(cat $selinuxfs/enforce)
+# Init LVM
+init_lvm() {
+ if [ ! -x /sbin/vgscan -o ! -x /sbin/vgchange ] && ! is_yes "$EVMS_LVM"; then
+ return
+ fi
+
+ if is_no "$LVM2"; then
+ lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}')
else
- # assume enforcing if you can't read it
- SELINUX=1
+ lvmversion=2
+ fi
+
+ if [ "$lvmversion" = "1" ] ; then
+ modprobe -s lvm-mod
+ lvmignorelocking=""
+ lvmsysinit=""
+ elif [ "$lvmversion" = "2" ] ; then
+ modprobe -s dm-mod
+ lvmignorelocking="--ignorelockingfailure"
+ lvmsysinit="--sysinit"
+ else
+ modprobe -s lvm-mod
+ # device mapper (2.5+ and patched 2.4)
+ modprobe -s dm-mod
+ lvmignorelocking=""
+ lvmsysinit=""
fi
-fi
-if [ -x /sbin/restorecon ] && LC_ALL=C fgrep -q " /dev " /proc/mounts 2>/dev/null ; then
- /sbin/restorecon -R /dev 2>/dev/null
+ run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelocking
+ run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmsysinit
+ if [ "$lvmversion" = "2" ]; then
+ /sbin/vgmknodes $lvmignorelocking
+ # display VG statistics
+ /sbin/vgdisplay -s $lvmignorelocking
+ fi
+}
+
+# boot logging to /var/log/boot.log. install showconsole package to get it.
+if ! is_no "$RC_BOOTLOG" && [ -x /sbin/blogd ]; then
+ RC_BOOTLOG=1
+else
+ RC_BOOTLOG=
fi
+if ! is_yes "$VSERVER"; then
+ # we need /proc mounted before everything
+ is_fsmounted proc /proc || mount -n /proc || mount -n -o gid=17,hidepid=2 -t proc /proc /proc
+
+ parse_cmdline
+
+ if [ -d /run ]; then
+ is_fsmounted tmpfs /run || mount -n -t tmpfs run /run
+ fi
+
+ # Early sysctls
+ sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
+
+ # sysfs is also needed before any other things (under kernel > 2.5)
+ if grep -q sysfs /proc/filesystems 2>/dev/null; then
+ is_fsmounted sysfs /sys || mount -n -o gid=17 -t sysfs sysfs /sys
+ if grep -q securityfs /proc/filesystems 2>/dev/null; then
+ mount -n -o gid=17 -t securityfs securityfs /sys/kernel/security
+ fi
+ fi
-if [ "$CONSOLETYPE" = "vt" -a -x /sbin/setsysfont ]; then
- run_cmd "Setting default font" /sbin/setsysfont
+ # selinux
+ if grep -q selinuxfs /proc/filesystems 2>/dev/null && ! is_fsmounted selinuxfs /selinux; then
+ mount -n -o gid=17 -t selinuxfs selinuxfs /selinux
+ fi
+
+ # PLD Linux LiveCD support
+ if [ -x /etc/rc.d/rc.live ]; then
+ /etc/rc.d/rc.live
+ fi
+
+ # Choose Hardware profile
+ if [ -f /etc/sysconfig/hwprof ]; then
+ . /etc/sysconfig/hwprof
+ if is_yes "${HWPROFILES}" && [ -x /sbin/hwprofile -a -d /etc/sysconfig/hwprofiles/data ]; then
+ mount -n / -o rw,remount
+ /sbin/hwprofile -qf
+ mount -n / -o ro,remount
+ fi
+ fi
+
+ # Disable splash when requested
+ is_no "$BOOT_SPLASH" && [ -e /proc/splash ] && echo "0" > /proc/splash
+
+ # Check SELinux status
+ selinuxfs=$(awk '/ selinuxfs / { print $2 }' /proc/mounts 2> /dev/null)
+ SELINUX=
+ if [ -n "$selinuxfs" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
+ if [ -r $selinuxfs/enforce ] ; then
+ SELINUX=$(cat $selinuxfs/enforce)
+ else
+ # assume enforcing if you can't read it
+ SELINUX=1
+ fi
+ fi
+
+ if [ -x /sbin/restorecon ] && is_fsmounted tmpfs /dev; then
+ /sbin/restorecon -R /dev 2>/dev/null
+ fi
+
+ [ -z "${CONSOLETYPE}" ] && CONSOLETYPE="$(/sbin/consoletype)"
+
+ if [ "$CONSOLETYPE" = "vt" -a -x /sbin/setsysfont ]; then
+ /sbin/setsysfont
+ fi
fi
+
# Print welcome message
nls "\t\t\t%sPowered by %sPLD Linux Distribution%s" "$(termput setaf $CPOWEREDBY)" "$(termput setaf $CPLD)" "$(termput op)"
-if is_yes "$PROMPT"; then
+if ! is_no "$RC_PROMPT"; then
nls -n "\t\t Press %sI%s to enter interactive startup" "$(termput setaf $CI)" "$(termput op)"
echo
- sleep 1
fi
# Set the hostname
-run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME}
+if [ -z "${HOSTNAME}" ]; then
+ show "$(nls 'Host:') $(hostname)"; ok
+else
+ run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME}
+fi
# Set the NIS domain name
if [ -n "$NISDOMAIN" ]; then
if ! is_yes "$VSERVER"; then
# Set console loglevel
if [ -n "$CONSOLE_LOGLEVEL" ]; then
- /bin/dmesg -n $CONSOLE_LOGLEVEL
+ dmesg -n $CONSOLE_LOGLEVEL
fi
- if [ -f /etc/udev/udev.conf ];then
- . /etc/udev/udev.conf
+ if ! is_no "$START_UDEV" && [ -x /sbin/start_udev ] && [[ "$container" != lxc* ]]; then
+ is_fsmounted devtmpfs /dev || mount -n -t devtmpfs devtmpfs /dev
+ load_kernel_modules modules.preudev
+ /sbin/start_udev
+ use_upstart && [ -x /sbin/initctl ] && /sbin/initctl -q start udev
+ elif [ -x /lib/firmware/firmware-loader.sh ]; then
+ /sbin/sysctl -e -w kernel.hotplug=/lib/firmware/firmware-loader.sh > /dev/null 2>&1
fi
- [ -x /sbin/start_udev ] && run_cmd "Starting udev" /sbin/start_udev
-
- # /dev must be also mounted before everything but only if we want use them ;-)
- if is_yes "$MOUNT_DEVFS"; then
- run_cmd "Mounting Device Filesystem" mount -n -t devfs /dev /dev
- fi
-
- # set up devfsd
- if [ -e /dev/.devfsd -a -x /sbin/devfsd ]; then
- run_cmd "Starting Device Filesystem Daemon" /sbin/devfsd /dev
+ # Unmount the initrd, if necessary
+ if grep -q /initrd /proc/mounts 2>/dev/null && ! grep -q /initrd/loopfs /proc/mounts 2>/dev/null; then
+ umount /initrd/dev 2>/dev/null
+ umount /initrd
+ /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
fi
- # cpuset support (mounted unconditionally, shouldn't be a problem)
- if grep -q cpuset /proc/filesystems 2>/dev/null ; then
- mount -n -t cpuset none /dev/cpuset
+ # Start logging console output since we have all /dev stuff setup
+ if [ "$RC_BOOTLOG" ]; then
+ /sbin/blogd
fi
# Configure Linux kernel (initial configuration, some required modules still
# may be missing).
- /sbin/sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
-
- # Set the system clock.
- ARC=0
- SRM=0
- UTC=0
-
- if [ -f /etc/sysconfig/clock ]; then
- . /etc/sysconfig/clock
-
- # convert old style clock config to new values
- if [ "${CLOCKMODE}" = "GMT" ]; then
- UTC=true
- elif [ "${CLOCKMODE}" = "ARC" ]; then
- ARC=true
- fi
- fi
-
- if grep "system serial" /proc/cpuinfo 2>/dev/null | grep -q MILO 2>/dev/null ; then
- ARC=true
- fi
-
- CLOCKDEF=""
- CLOCKFLAGS="--hctosys"
-
- if is_yes "$UTC" ; then
- CLOCKFLAGS="$CLOCKFLAGS --utc"
- CLOCKDEF="$CLOCKDEF (utc)"
- else
- CLOCKFLAGS="$CLOCKFLAGS --localtime"
- CLOCKDEF="$CLOCKDEF (local)"
- fi
-
- if is_yes "$ARC" ; then
- CLOCKFLAGS="$CLOCKFLAGS -A"
- CLOCKDEF="$CLOCKDEF (arc)"
- fi
-
- if is_yes "$SRM" ; then
- CLOCKFLAGS="$CLOCKFLAGS -S"
- CLOCKDEF="$CLOCKDEF (srm)"
- fi
+ sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
# Check if timezone definition is available
- if [ -e /etc/localtime ] ; then
- if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
+ if [ -e /etc/localtime ] && [ -e /dev/rtc -o -e /dev/rtc0 ] ; then
+ if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
fi
else
TIME_SETUP_DELAYED=yes
fi
+ delay_cryptsetup=0
+ if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then
+ # XXX might need modules dep
+ # Device mapper & related initialization
+ if ! grep -qF device-mapper /proc/devices; then
+ modprobe -s dm-mod
+ fi
+
+ . /etc/rc.d/init.d/cryptsetup
+ show "Starting disk encryption"
+ init_crypto 0
+ delay_cryptsetup=$?
+ [ $delay_cryptsetup = 0 ] && ok || fail
+ fi
+
# Start up swapping
run_cmd "Activating swap partitions" swapon -a -e
# Initialize USB controllers
usb=0
- if ! grep -iq "nousb" /proc/cmdline 2>/dev/null && ! grep -q "/proc/bus/usb" /proc/mounts 2>/dev/null ; then
- aliases=$(/sbin/modprobe -c | awk '/^alias usb-controller/ { print $3 }')
+ if [ -z "$nousb" ] && ! is_fsmounted usbfs /proc/bus/usb; then
+ aliases=$(modprobe_c | awk '/^alias[\t ]+usb-controller/ { print $3 }')
if [ -n "$aliases" -a "$aliases" != "off" ] ; then
- /sbin/modprobe -k usbcore
+ modprobe -s usbcore
for alias in $aliases ; do
[ "$alias" = "off" ] && continue
- run_cmd "$(nls 'Initializing USB controller') ($alias)" /sbin/modprobe $alias
+ run_cmd "$(nls 'Initializing USB controller') ($alias)" modprobe -s $alias
done
[ $? -eq 0 -a -n "$aliases" ] && usb=1
fi
fi
fi
- if [ "$usb" = "1" -a ! -f /proc/bus/usb/devices ]; then
- run_cmd "Mounting USB filesystem" mount -t usbfs usbfs /proc/bus/usb
+ if [ "$usb" = "1" -a -d /proc/bus/usb ] && ! is_fsmounted usbfs /proc/bus/usb ; then
+ run_cmd "Mounting USB filesystem" mount -n -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb
fi
needusbstorage=
if [ "$usb" = "1" ]; then
- needusbstorage=$(LC_ALL=C cat /proc/bus/usb/devices 2>/dev/null|grep -e "^I.*Cls=08" 2>/dev/null)
+ needusbstorage=$(cat /proc/bus/usb/devices 2>/dev/null | grep -e "^I.*Cls=08" 2>/dev/null)
if [ "$(kernelverser)" -lt "002006" ]; then
- LC_ALL=C grep -q 'hid' /proc/bus/usb/drivers 2>/dev/null || run_cmd "Initializing USB HID interface" modprobe hid 2> /dev/null
+ grep -Fq 'hid' /proc/bus/usb/drivers 2>/dev/null || run_cmd "Initializing USB HID interface" modprobe -s hid
mouseoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02" 2>/dev/null)
kbdoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01" 2>/dev/null)
if [ -n "$kbdoutput" ]; then
- run_cmd "Initializing USB keyboard" modprobe keybdev
+ run_cmd "Initializing USB keyboard" modprobe -s keybdev
fi
if [ -n "$mouseoutput" ]; then
- run_cmd "Initializing USB mouse" modprobe mousedev
+ run_cmd "Initializing USB mouse" modprobe -s mousedev
fi
fi
fi
# Setup hdparm thing (if exists and is needed)
- if ! grep -iq nohdparm /proc/cmdline 2>/dev/null; then
+ if [ -z "$nohdparm" ]; then
[ -x /etc/rc.d/rc.hdparm ] && /etc/rc.d/rc.hdparm
fi
- if [ -f /fastboot ] || grep -iq "fastboot" /proc/cmdline 2>/dev/null ; then
- fastboot=yes
- else
- fastboot=
+ if [ -z "$fastboot" ] && [ -f /fastboot ]; then
+ fastboot=1
fi
if [ -f /fsckoptions ]; then
if [ -f /forcefsck ]; then
fsckoptions="-f $fsckoptions"
+ else
+ # Obey the fs_passno setting for / (see fstab(5))
+ # - find the / entry
+ # - make sure we have at least 6 fields
+ _ROOTFS_PASSNO=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $6}' /etc/fstab)
fi
_RUN_QUOTACHECK=0
- _ROOTFS_TYPE=$(grep " / " /proc/mounts 2>/dev/null | awk '{ print $3 }')
-
- if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" ]; then
- show "Checking root filesystem"; started
- initlog -c "fsck -C -T -a $fsckoptions /"
-
- rc=$?
+ _ROOTFS_DEVICE=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $1}' /etc/fstab)
+ _ROOTFS_TYPE=$(awk '$2 == "/" && $3 != "rootfs" { print $3 }' /proc/mounts 2>/dev/null)
- # A return of 4 or higher means there were serious problems.
- if [ $rc -gt 3 ]; then
- [ -e /proc/splash ] && echo "verbose" > /proc/splash
- # don't use '\n' in nls macro !
- echo
- echo
- nls "*** An error occurred during the file system check."
- nls "*** Dropping you to a shell; the system will reboot"
- nls "*** when you leave the shell."
- echo
-
- PS1="$(nls '(Repair filesystem)# ')"; export PS1
- [ "$SELINUX" = "1" ] && disable_selinux
- if is_yes "$RUN_SULOGIN_ON_ERR"; then
- /sbin/sulogin
- else
- /bin/sh
- fi
-
- run_cmd "Unmounting file systems" umount -a
- mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
- # A return of 2 or 3 means that filesystem was repaired but we need
- # to reboot.
- elif [ "$rc" = "2" -o "$rc" = "3" ]; then
- [ -e /proc/splash ] && echo "verbose" > /proc/splash
- echo
- nls "*** Filesystem was repaired but system needs to be"
- nls "*** rebooted before mounting it."
- nls "*** REBOOTING ***"
- echo
-
- run_cmd "Unmounting file systems" umount -a
- mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
- elif [ "$rc" = "1" ]; then
- _RUN_QUOTACHECK=1
- fi
- fi
-
- # Unmount the initrd, if necessary
- if LC_ALL=C grep -q /initrd /proc/mounts 2>/dev/null && ! LC_ALL=C grep -q /initrd/loopfs /proc/mounts 2>/dev/null ; then
- if [ -e /initrd/dev/.devfsd ]; then
- umount /initrd/dev
- fi
- umount /initrd
- /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
- fi
-
- # Check for arguments
- if grep -iq nopnp /proc/cmdline 2>/dev/null; then
- PNP=
- else
- PNP=yes
+ if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "aufs" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_TYPE" != "squashfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ] && [[ "$container" != lxc* ]]; then
+ check_root_fs
fi
# set up pnp and kernel pnp
- if [ -n "$PNP" ]; then
- if is_yes "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
+ if is_yes "$RUN_USERPNP" || is_yes "$RUN_KERNELPNP"; then
+ if [ -z "$nopnp" ] && is_yes "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then
run_cmd "Setting up ISA PNP devices (userspace pnp)" /sbin/isapnp /etc/isapnp/isapnp.conf
fi
- if is_yes "$RUN_KERNELPNP"; then
- /sbin/modprobe -k isa-pnp 2> /dev/null
+ if [ -z "$nopnp" ] && is_yes "$RUN_KERNELPNP"; then
+ modprobe -s isa-pnp
if [ -e /proc/isapnp -a -f /etc/isapnp/isapnp-kernel.conf ]; then
show "Setting up ISA PNP devices (kernelspace pnp)"; busy
grep -v "^#" /etc/isapnp/isapnp-kernel.conf 2>/dev/null >/proc/isapnp && (deltext; ok) || (deltext; fail)
fi
fi
+ _ROOTFS_RO=$(awk '($1 !~ /^#/ && $2 == "/" && ($4 == "ro" || $4 ~ /,ro$/ || $4 ~ /^ro,/ || $4 ~ /,ro,/ ) && NF >= 6) { print "ro" }' /etc/fstab)
# Remount the root filesystem read-write
- run_cmd "Remounting root filesystem in rw mode" mount -n -o remount,rw /
+ if [ -z "$_ROOTFS_RO" ]; then
+ run_cmd "Remounting root filesystem in rw mode" mount -n -o remount,rw /
+ fi
# Update quotas if fsck was run on /
if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
run_cmd "Checking root filesystem quotas" /sbin/quotacheck -vnug /
fi
-fi
-
-# Clean up SELinux labels
-if [ -n "$SELINUX" ]; then
- for file in /etc/mtab /etc/cryptomtab /etc/ld.so.cache ; do
- [ -r $file ] && restorecon $file >/dev/null 2>&1
- done
-fi
-
-# Remove stale backups
-rm -f /etc/mtab~ /etc/mtab~~ /etc/cryptomtab~ /etc/cryptomtab~~
-if ! is_yes "$VSERVER"; then
- # Clear mtab
- :>/etc/mtab
- [ -f /etc/cryptomtab ] && :>/etc/cryptomtab
-
- # Enter root, /proc, /sys, devfs and other into mtab.
- mount -f /
- mount -f /proc
- [ -f /proc/bus/usb/devices ] && mount -f -t usbfs usbfs /proc/bus/usb
- [ -e /dev/.devfsd ] && mount -f -t devfs devfs /dev
-
- if grep -q sysfs /proc/filesystems 2>/dev/null ; then
- mount -f -t sysfs sysfs /sys
- if [ "$(kernelver)" -ge "002006014" ] && \
- grep -q securityfs /proc/filesystems 2>/dev/null ; then
- mount -f -t securityfs securityfs /sys/kernel/security
- fi
+ # Clean up SELinux labels
+ if [ -n "$SELINUX" ]; then
+ for file in /etc/mtab /etc/cryptomtab /etc/ld.so.cache; do
+ [ -r $file ] && restorecon $file >/dev/null 2>&1
+ done
fi
- if grep -q selinuxfs /proc/filesystems 2>/dev/null ; then
- mount -f -t selinuxfs selinuxfs /selinux
- fi
-
- if grep -q cpuset /proc/filesystems 2>/dev/null ; then
- mount -n -t cpuset none /dev/cpuset
+ if [ "$delay_cryptsetup" != 0 ]; then
+ show "Starting disk encryption using the RNG"
+ init_crypto 1
+ delay_cryptsetup=$?
+ [ $delay_cryptsetup = 0 ] && ok || fail
fi
else
- clean_vserver_mtab
+ # Start logging console output since we have all /dev stuff setup
+ if [ "$RC_BOOTLOG" ]; then
+ /sbin/blogd -q
+ fi
fi
+# Remove stale backups
+rm -f /etc/mtab~ /etc/mtab~~ /etc/cryptomtab~ /etc/cryptomtab~~ >/dev/null 2>&1
+
# Remove /etc/nologin when starting system
[ -f /etc/nologin.boot ] && rm -f /etc/nologin /etc/nologin.boot
-if is_yes "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then
+if ! is_no "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then
show "Enabling Delay Login"; busy
echo > /etc/nologin
nls "System bootup in progress - please wait" >> /etc/nologin
fi
if ! is_yes "$VSERVER"; then
+ # Clear mtab
+ > /etc/mtab
+ [ -f /etc/cryptomtab ] && > /etc/cryptomtab
+
+ # Enter root, /proc, /sys and other into mtab.
+ mount -f / 2> /dev/null
+ mount -f /proc 2> /dev/null
+ if is_fsmounted devtmpfs /dev; then
+ mount -f -t devtmpfs devtmpfs /dev 2> /dev/null
+ fi
+ if is_fsmounted tmpfs /run; then
+ mount -f -t tmpfs run /run 2> /dev/null
+ fi
+
+ if is_fsmounted usbfs /proc/bus/usb; then
+ mount -f -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb 2> /dev/null
+ fi
+
+ if is_fsmounted sysfs /sys; then
+ mount -f -t sysfs sysfs /sys 2> /dev/null
+ if is_fsmounted securityfs /sys/kernel/security ; then
+ mount -f -t securityfs securityfs /sys/kernel/security 2> /dev/null
+ fi
+ fi
+
+ if is_fsmounted selinuxfs /selinux; then
+ mount -f -t selinuxfs selinuxfs /selinux 2> /dev/null
+ fi
+
+ emit --no-wait root-filesystem
+ emit --no-wait virtual-filesystems
+
if [ ! -f /proc/modules ]; then
USEMODULES=
- elif ! grep -iq nomodules /proc/cmdline 2>/dev/null; then
+ elif [ -z "$nomodules" ]; then
USEMODULES=y
else
USEMODULES=
fi
+ uname_r=$(uname -r)
# Adjust symlinks as necessary in /boot to keep system services from
# spewing messages about mismatched System maps and so on.
- if is_yes "$SET_SLINKS"; then
- if [ -L /boot/System.map -a -r /boot/System.map-`uname -r` ] ; then
- ln -s -f System.map-`uname -r` /boot/System.map
+ if ! is_no "$SET_SLINKS"; then
+ if [ -L /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
+ ln -s -f System.map-$uname_r /boot/System.map
fi
- if [ ! -e /boot/System.map -a -r /boot/System.map-`uname -r` ] ; then
- ln -s -f System.map-`uname -r` /boot/System.map
+ if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
+ ln -s -f System.map-$uname_r /boot/System.map
fi
fi
# Run depmod if RUN_DEPMOD != "no" and:
# a) user requested or RUN_DEPMOD="";
# b) modules.dep is missing
- # c) modules.dep is older than /etc/modules.conf or /lib/modules/`uname -r`
if ! is_no "$RUN_DEPMOD" && [ -n "$USEMODULES" ]; then
if is_yes "$RUN_DEPMOD" || [ -z "$RUN_DEPMOD" ]; then
run_cmd "Finding module dependencies" depmod -a
- elif [ "$RUN_DEPMOD" = "ifmissing" ]; then
+ elif [ "$RUN_DEPMOD" = "ifmissing" ] && [ ! -f /lib/modules/$uname_r/modules.dep ]; then
run_cmd "Finding module dependencies" depmod -A
fi
fi
+ unset uname_r
if [ -f /proc/sys/kernel/modprobe ]; then
if [ -n "$USEMODULES" ]; then
sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
- sysctl -w kernel.hotplug="/sbin/hotplug" >/dev/null 2>&1
else
# We used to set this to NULL, but that causes
# 'failed to exec' messages"
sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
- sysctl -w kernel.hotplug="/bin/true" >/dev/null 2>&1
fi
fi
# Load usb storage here, to match most other things
if [ -n "$needusbstorage" ]; then
- modprobe -k usb-storage >/dev/null 2>&1
+ modprobe -s usb-storage
fi
# Load firewire devices
- if ! grep -iq "nofirewire" /proc/cmdline 2>/dev/null ; then
- aliases=$(/sbin/modprobe -c | awk '/^alias ieee1394-controller/ { print $3 }')
+ if [ -z "$nofirewire" ]; then
+ aliases=$(modprobe_c | awk '/^alias ieee1394-controller/ { print $3 }')
if [ -n "$aliases" -a "$aliases" != "off" ] ; then
for alias in $aliases ; do
[ "$alias" = "off" ] && continue
- run_cmd "$(nls 'Initializing firewire controller') ($alias)" /sbin/modprobe $alias
+ run_cmd "$(nls 'Initializing firewire controller') ($alias)" modprobe $alias
done
- LC_ALL=C grep -E "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && /sbin/modprobe -s sbp2 > /dev/null 2>&1
+ grep -E "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && modprobe -s sbp2
fi
fi
# Load sound modules if they need persistent DMA buffers
- if grep -q "^options sound dmabuf=1" "$MODULES_CONF" 2>/dev/null ; then
+ if modprobe_c | grep -q "^options sound dmabuf=1"; then
RETURN=0
- alias=$(/sbin/modprobe -c | egrep -s "^alias[[:space:]]+sound[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
+ alias=$(modprobe_c | grep -sE "^alias[[:space:]]+sound[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
if [ -n "$alias" -a "$alias" != "off" ] ; then
run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
RETURN=$?
fi
- alias=$(/sbin/modprobe -c | egrep -s "^alias[[:space:]]+sound-slot-0[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
+ alias=$(modprobe_c | grep -sE "^alias[[:space:]]+sound-slot-0[[:space:]]+" 2>/dev/null | awk '{ print $3 }')
if [ -n "$alias" -a "$alias" != "off" ] ; then
run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias
RETURN=$?
fi
# Load modules
- if [ -x /etc/rc.d/rc.modules ]; then
- /etc/rc.d/rc.modules
+ if ! use_upstart; then
+ load_kernel_modules modules
+ for f in /etc/modules-load.d/*.conf; do
+ # already loaded by implicit "modules" load
+ [ "${f##*/}" = "modules.conf" ] && continue
+
+ [ -r $f ] || continue
+ load_kernel_modules ${f##/etc/}
+ done
+ fi
+
+ if ! is_no "$DM_MULTIPATH" [ -x /sbin/multipath ]; then
+ # first make nodes that were discarded due (possible) new /dev mount
+ modprobe -s dm-mod
+ /sbin/dmsetup mknodes
+ modprobe -s dm-multipath
+ run_cmd "Activating dm-multipath" /sbin/multipath -v 0
+ /sbin/dmsetup ls --target multipath --exec '/sbin/kpartx -a -p p'
+ fi
+
+ if ! is_no "$DMRAID" && [ -x /sbin/dmraid ]; then
+ run_cmd "Activating ATARAID devices" /sbin/dmraid -ay
fi
# Find and activate volume groups:
# EVMS
- if [ -x /sbin/evms_activate ]; then
+ if is_yes "$EVMS_LVM" && [ -x /sbin/evms_activate ]; then
if [ "$(kernelverser)" -lt "002006" ]; then
# Linux 2.4 core modules
- modprobe -s -k evms > /dev/null 2>&1
- modprobe -s -k evms_passthru > /dev/null 2>&1
- modprobe -s -k ldev_mgr > /dev/null 2>&1
- modprobe -s -k dos_part > /dev/null 2>&1
+ modprobe -s evms
+ modprobe -s evms_passthru
+ modprobe -s ldev_mgr
+ modprobe -s dos_part
else
# Linux 2.6 core module
- modprobe -s -k evmscore > /dev/null 2>&1
+ modprobe -s evmscore
fi
- is_yes "$EVMS_GUID_PTABLE" && modprobe -s -k gpt_part >/dev/null 2>&1
- is_yes "$EVMS_LVM" && modprobe -s -k lvm_vge >/dev/null 2>&1
- is_yes "$EVMS_AIX" && modprobe -s -k AIXlvm_vge >/dev/null 2>&1
- is_yes "$EVMS_OS2" && modprobe -s -k os2lvm_vge >/dev/null 2>&1
+ is_yes "$EVMS_GUID_PTABLE" && modprobe -s gpt_part
+ is_yes "$EVMS_LVM" && modprobe -s lvm_vge
+ is_yes "$EVMS_AIX" && modprobe -s AIXlvm_vge
+ is_yes "$EVMS_OS2" && modprobe -s os2lvm_vge
run_cmd "Discovering EVMS volumes" /sbin/evms_activate
if is_yes "$EVMS_LVM" && is_yes "$EVMS_LVM_COMPAT_NODES" ; then
# Link nodes for compatibility with LVM
- if [ "echo /dev/evms/lvm/*" != '/dev/evms/lvm/*' ] ; then
- ln -s /dev/evms/lvm/* /dev/
+ if [ "$(echo /dev/evms/lvm/*)" != '/dev/evms/lvm/*' ] ; then
+ ln -s /dev/evms/lvm/* /dev
fi
fi
fi
- # LVM (keep in sync with LVM starting after RAID run!)
- if is_yes "$EVMS_LVM" || [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
- lvmversion=$(/sbin/vgchange --version 2>/dev/null | awk '{gsub("vgchange: Logical Volume Manager ",""); gsub("LVM version: ",""); gsub(/\..*/,"");print $1; exit}')
- if [ "$lvmversion" = "1" ] ; then
- modprobe -s -k lvm-mod >/dev/null 2>&1
- lvmignorelock=""
- elif [ "$lvmversion" = "2" ] ; then
- modprobe -s -k dm-mod >/dev/null 2>&1
- lvmignorelock="--ignorelockingfailure"
- else
- modprobe -s -k lvm-mod >/dev/null 2>&1
- # device mapper (2.5+ and patched 2.4)
- modprobe -s -k dm-mod >/dev/null 2>&1
- lvmignorelock=""
- fi
- run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelock && \
- run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmignorelock
- [ "$lvmversion" = "2" ] && /sbin/vgscan --mknodes $lvmignorelock > /dev/null 2>&1
-
- fi
-
- # Add raid devices
- if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ] || [ -f /etc/raidtab ]; then
- modprobe -s md >/dev/null 2>&1
- if [ -f /proc/mdstat ]; then
- goraidtab=1
- golvm=0
- rc=0
- if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ]; then
- if (grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf 2>/dev/null); then
- run_cmd "Starting up RAID devices" /sbin/mdadm --assemble --scan
- rc=$?
- [ "$rc" -eq 0 ] && goraidtab=0 && golvm=1
- fi
- fi
+ # Init LVM
+ if ! is_no "$LVM2"; then
+ init_lvm
+ fi
- if [ -f /etc/raidtab -a "$goraidtab" -eq 1 ]; then
- for i in $(grep -v "^#" /etc/raidtab 2>/dev/null | grep "raiddev" 2>/dev/null | awk '{print $2}') ; do
- golvm=1
- RAIDDEV=$(basename $i)
- RAIDSTAT=$(grep "^$RAIDDEV : active" /proc/mdstat 2>/dev/null)
- show "Starting up RAID device %s" $RAIDDEV
- busy
- if [ -z "$RAIDSTAT" ]; then
- # Try raidstart first...if that fails then
- # fall back to raid0run and if that fails too
- # fall back to raidadd, raidrun.
- RESULT=1
- if [ -x /sbin/raidstart ]; then
- /sbin/raidstart $i
- RESULT=$?
- fi
- if [ $RESULT -gt 0 -a -x /sbin/raid0run ]; then
- /sbin/raid0run $i
- RESULT=$?
- fi
- if [ $RESULT -gt 0 -a -x /sbin/raidadd -a -x /sbin/raidrun ]; then
- /sbin/raidadd $i
- /sbin/raidrun $i
- RESULT=$?
- fi
- if [ $RESULT -gt 0 ]; then
- rc=1
- fail
- else
- ok
- fi
- else
- ok
- fi
- done
- fi
+ if [ "$delay_cryptsetup" != 0 ]; then
+ show "Starting disk encryption"
+ init_crypto 1
+ delay_cryptsetup=$?
+ [ $delay_cryptsetup = 0 ] && ok || fail
+ fi
- # A non-zero return means there were problems
- if [ $rc -gt 0 ]; then
- [ -e /proc/splash ] && echo "verbose" > /proc/splash
- show "Starting up RAID devices"; fail
- echo
- echo
- nls "*** An error occurred during the RAID startup."
- nls "*** Dropping you to a shell; the system will reboot"
- nls "*** when you leave the shell."
- echo
-
- PS1="$(nls '(RAID Repair)# ')"; export PS1
- [ "$SELINUX" = "1" ] && disable_selinux
- if is_yes "$RUN_SULOGIN_ON_ERR"; then
- /sbin/sulogin
- else
- /bin/sh
- fi
-
- run_cmd "Unmounting file systems" umount -a
- run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
- fi
- # LVM on RAID (keep in sync with LVM setting few lines above)
- if [ "$golvm" -eq "1" ]; then
- if is_yes "$EVMS_LVM" || [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
- run_cmd "Scanning for LVM volume groups (on RAID)" /sbin/vgscan $lvmignorelock && \
- run_cmd "Activating LVM volume groups (on RAID)" /sbin/vgchange -a y $lvmignorelock
- [ "$lvmversion" = "2" ] && /sbin/vgscan --mknodes $lvmignorelock > /dev/null 2>&1
- fi
- fi
- show "Starting up RAID devices"; ok
- fi
+ if ! is_no "$MDADM"; then
+ init_mdadm
fi
_RUN_QUOTACHECK=0
# Check filesystems
- if [ -z "$fastboot" ] && ! grep -q nofsck /proc/cmdline 2>/dev/null; then
+ if [ -z "$fastboot" ] && [ -z "$nofsck" ]; then
rc_splash "fsck start"
show "Checking filesystems"; started
- initlog -c "fsck -C -T -R -A -a $fsckoptions"
+ initlog -c "fsck -C -T -R -A -a -P $fsckoptions"
rc=$?
# A return of 2 or higher means there were serious problems
if [ $rc -gt 1 ]; then
[ -e /proc/splash ] && echo "verbose" > /proc/splash
- echo
- echo
- nls "*** An error occurred during the file system check."
- nls "*** Dropping you to a shell; the system will reboot"
- nls "*** when you leave the shell."
- echo
PS1="$(nls '(Repair filesystem)# ')"; export PS1
- [ "$SELINUX" = "1" ] && disable_selinux
- if is_yes "$RUN_SULOGIN_ON_ERR"; then
- /sbin/sulogin
- else
- /bin/sh
- fi
+ repair_shell "$(nls '*** An error occurred during the file system check.')"
- run_cmd "Unmounting file systems" umount -a
- run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
_RUN_QUOTACHECK=1
fi
# Mount all other filesystems (except for NFS and /proc, which is already
# mounted). Contrary to standard usage,
# filesystems are NOT unmounted in single user mode.
+ run_cmd "Mounting local filesystems" mount -a -t nonfs,nfs4,smbfs,ncpfs,proc,cifs -O no_netdev
- run_cmd "Mounting local filesystems" mount -a -t nonfs,smbfs,ncpfs,proc,cifs -O no_netdev
+ # now we have /usr mounted, recheck if we have gettext and tput available.
+ if is_no "$TPUT"; then
+ GETTEXT=
+ TPUT=
+ rc_gettext_init
+ fi
# Now do some workaround - encrypted filesystems couldn't have been fsck-ed
# before mount - that's where the password is entered.
# option is removed from /etc/mtab
if [ -z "$fastboot" ] && grep "^[^#].*encryption=" /etc/fstab 2>/dev/null | grep -v -q "noauto" 2>/dev/null; then
show "Checking encrypted filesystems"; started
- LOOPLIST="$(awk '
+ LOOPLIST="$(LC_ALL=C awk '
FILENAME=="/proc/mounts" {
TAB[$2]=$1;
}
# A return of 2 or higher means there were serious problems.
if [ $rc -gt 1 ]; then
[ -e /proc/splash ] && echo "verbose" > /proc/splash
- echo
- echo
- nls "*** An error occurred during the file system check."
- nls "*** Dropping you to a shell; the system will reboot"
- nls "*** when you leave the shell."
- echo
-
- PS1="`nls '(Repair filesystem)# '`"; export PS1
- [ "$SELINUX" = "1" ] && disable_selinux
- if is_yes "$RUN_SULOGIN_ON_ERR"; then
- /sbin/sulogin
- else
- /bin/sh
- fi
- run_cmd "Unmounting file systems" umount -a
- run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro /
- run_cmd "Automatic reboot in progress" reboot
+ PS1="$(nls '(Repair filesystem)# ')"; export PS1
+ repair_shell "$(nls '*** An error occurred during the file system check.')"
+
elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
_RUN_QUOTACHECK=1
fi
show "Remounting encrypted filesystems back in rw mode"; busy
- awk '
+ LC_ALL=C awk '
FILENAME=="/proc/mounts" {
TAB[$2]=$1;
}
' /proc/mounts /etc/fstab
ok
fi
-fi
-if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
- run_cmd "Checking filesystem quotas" /sbin/quotacheck -vnugRa
-fi
+ # /var/log should be writable now, so start saving the boot output
+ if [ "$RC_BOOTLOG" ]; then
+ echo > /var/log/boot.log
+ killall -IO blogd
+ fi
-# Turn on quota
-if [ -x /sbin/quotaon ]; then
- run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -aug
-fi
+ if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then
+ run_cmd "Checking filesystem quotas" /sbin/quotacheck -vnugRa
+ fi
-[ -n "$SELINUX" ] && [ -f /.autorelabel ] && relabel_selinux
+ # Turn on quota
+ if [ -x /sbin/quotaon ]; then
+ run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -aug
+ fi
-# Turn on process accounting
-if [ -x /etc/rc.d/rc.acct ]; then
- /etc/rc.d/rc.acct start
-fi
+ emit --no-wait local-filesystems
+
+ # FIXME: this should be delayed until remote filesystems are mounted,
+ # especialy when /usr or other standard fs is remote
+ emit --no-wait filesystem
+
+ # Turn on process accounting
+ if [ -x /etc/rc.d/rc.acct ]; then
+ /etc/rc.d/rc.acct start
+ fi
-if ! is_yes "$VSERVER"; then
# Set the clock if timezone definition wasn't available (eg. /usr not mounted)
- if is_yes "$TIME_SETUP_DELAYED"; then
- if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then
+ if is_yes "$TIME_SETUP_DELAYED" && [ -e /dev/rtc -o -e /dev/rtc0 ]; then
+ if run_cmd "$(nls 'Setting clock')" hwclock --hctosys; then
show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok
fi
fi
. /etc/rc.d/rc.serial
fi
- if [ -f /proc/sys/kernel/panic -a "$PANIC_REBOOT_TIME" -gt "0" ]; then
+ if [ -n "$PANIC_REBOOT_TIME" -a "$PANIC_REBOOT_TIME" -gt "0" -a -f /proc/sys/kernel/panic ]; then
show 'Setting %s seconds for kernel reboot after panic' "$PANIC_REBOOT_TIME"; busy
- if (sysctl -w kernel.panic=$PANIC_REBOOT_TIME >/dev/null 2>&1); then ok; else fail; fi
+ # NOTE: you should use /etc/sysctl.conf instead
+ if sysctl -w kernel.panic=$PANIC_REBOOT_TIME >/dev/null 2>&1; then ok; else fail; fi
fi
# ... and here finish configuring parameters
- /sbin/sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
+ sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1
+else
+ emit --no-wait root-filesystem
+ emit --no-wait virtual-filesystems
+ emit --no-wait local-filesystems
+ emit --no-wait filesystem
+
+ # /var/log should be writable now, so start saving the boot output
+ if [ "$RC_BOOTLOG" ]; then
+ echo > /var/log/boot.log
+ killall -IO blogd
+ fi
+
+ clean_vserver_mtab
fi
+
+[ -n "$SELINUX" ] && [ -f /.autorelabel ] && relabel_selinux
+
# Clean up /.
-rm -f /fastboot /fsckoptions /forcefsck /halt /poweroff
+rm -f /fastboot /fsckoptions /forcefsck /halt /poweroff >/dev/null 2>&1
# Clean up /var
-# I'd use find, but /usr may not be mounted.
+# /usr could be still not mounted if it is on NFS.
for afile in /var/lock/* /var/run/*; do
- bafile=$(basename $afile)
+ bafile=${afile##*/}
if [ -d "$afile" ]; then
- [ "$bafile" != "news" -a "$bafile" != "sudo" -a "$bafile" != "mon" ] && rm -rf $afile/*
+ case $bafile in
+ news|sudo|mon|cvs)
+ ;;
+ *)
+ echo $afile/* | xargs rm -rf
+ ;;
+ esac
else
- [ "$bafile" != "hwprofile" ] && rm -f $afile 2> /dev/null
+ [ "$bafile" != "hwprofile" -a "$bafile" != "random-seed" ] && rm -f $afile 2> /dev/null
fi
done
+
# Delete stale files
rm -f /var/lib/rpm/__db* /var/spool/postoffice/.pid.* /tmp/.X*-lock \
/tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
{
# Clean up utmp/wtmp
-if ! is_no "$NEED_XFILES" ; then
- :>/var/run/utmpx
+if ! is_no "$NEED_XFILES"; then
+ > /var/run/utmpx
touch /var/log/wtmpx
- chown root.utmp /var/run/utmpx /var/log/wtmpx
+ chown root:utmp /var/run/utmpx /var/log/wtmpx
chmod 0664 /var/run/utmpx /var/log/wtmpx
else
- :>/var/run/utmp
+ > /var/run/utmp
touch /var/log/wtmp
- chown root.utmp /var/run/utmp /var/log/wtmp
+ chown root:utmp /var/run/utmp /var/log/wtmp
chmod 0664 /var/run/utmp /var/log/wtmp
fi
# Clean /tmp
-if is_yes "$CLEAN_TMP"; then
- rm -rf /tmp/* /tmp/.[a-zA-Z0-9]*
+if is_yes "$CLEAN_TMP" && ! is_fsmounted tmpfs /tmp; then
+ LC_ALL=C rm -rf /tmp/* /tmp/.[a-zA-Z0-9]*
fi
# System protected dirs
chown root:root /tmp/.ICE-unix
[ -n "$SELINUX" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1
-# Right, now turn on swap in case we swap to files
-swapon -a >/dev/null 2>&1
-run_cmd "Enabling swap space" /bin/true
-
-# If a SCSI tape has been detected, load the st module unconditionally
-# since many SCSI tapes don't deal well with st being loaded and unloaded
-if [ -f /proc/scsi/scsi ] && grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
- if grep -qv ' 9 st' /proc/devices 2>/dev/null; then
- if [ -n "$USEMODULES" ] ; then
- # Try to load the module. If it fails, ignore it...
- insmod -p st >/dev/null 2>&1 && modprobe -s st >/dev/null 2>&1
+if ! is_yes "$VSERVER"; then
+ run_cmd "Enabling swap space" true
+ # Right, now turn on swap in case we swap to files
+ swapon -a >/dev/null 2>&1
+ emit --no-wait all-swaps
+
+ # If a SCSI tape has been detected, load the st module unconditionally
+ # since many SCSI tapes don't deal well with st being loaded and unloaded
+ if [ -f /proc/scsi/scsi ] && grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
+ if grep -qv ' 9 st' /proc/devices 2>/dev/null; then
+ if [ -n "$USEMODULES" ] ; then
+ # Try to load the module. If it fails, ignore it...
+ insmod -p st >/dev/null 2>&1 && modprobe -s st
+ fi
fi
fi
-fi
-
-# There could be a new kernel version. Remove old psdevtab database
-rm -f /etc/psdevtab
-if ! is_yes "$VSERVER"; then
# Now that we have all of our basic modules loaded and the kernel going,
# let's dump the syslog ring somewhere so we can find it later
- dmesg -s 131072 > /var/log/dmesg
+ dmesg --raw > /var/log/dmesg
i=5
while [ $i -ge 0 ]; do
if [ -f /var/log/dmesg.$i ]; then
done
cp -f /var/log/dmesg /var/log/dmesg.0
chmod 0600 /var/log/dmesg /var/log/dmesg.0
+else
+ emit --no-wait all-swaps
fi
-kill -TERM $(/sbin/pidof getkey) >/dev/null 2>&1
+if ! is_no "$RC_PROMPT"; then
+ while :; do
+ pid=$(/sbin/pidof getkey)
+ [ -n "$pid" -o -e /var/run/getkey_done ] && break
+ usleep 100000
+ done
+ [ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1
+fi
} &
-if is_yes "$PROMPT"; then
+
+# /proc extra check if the background process we just spawned is still running,
+# as in case of vserver bootup it finishes quite instantly.
+if ! is_no "$RC_PROMPT" && [ -d /proc/$! ]; then
/sbin/getkey i && touch /var/run/confirm
+ touch /var/run/getkey_done
fi
wait
+if ! is_no "$RC_PROMPT"; then
+ rm -f /var/run/getkey_done
+fi
echo
-# This must be last line !
-# vi:syntax=sh
+emit --no-wait pld.sysinit-done
+
projects / projects / rc-scripts.git / blobdiff