exit
fi
done
-
-diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
-index 7a0c800..ec5ebbb 100644
---- a/drivers/net/ethernet/realtek/r8169.c
-+++ b/drivers/net/ethernet/realtek/r8169.c
-@@ -4103,6 +4103,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
- /* Get MAC address */
- for (i = 0; i < ETH_ALEN; i++)
- dev->dev_addr[i] = RTL_R8(MAC0 + i);
-+
-+ if (!is_valid_ether_addr(dev->dev_addr)) {
-+ /* Report it and use a random ethernet address instead */
-+ netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
-+ random_ether_addr(dev->dev_addr);
-+ netdev_info(dev, "Using random MAC address: %pM\n",
-+ dev->dev_addr);
-+ }
- memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
-
- SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
---
-1.7.7.3
-
-From 4acca62e1f1976015ebb718242523e1832716bc7 Mon Sep 17 00:00:00 2001
-From: Takahisa Tanaka <mc74hc00@gmail.com>
-Date: Wed, 14 Nov 2012 20:21:26 +0900
-Subject: [PATCH] sp5100_tco: Add SB8x0 chipset support
-
-The current sp5100_tco driver only supports SP5100/SB7x0 chipset, doesn't
-support SB8x0 chipset, because current sp5100_tco driver doesn't know that the
-offset address for watchdog timer was changed from SB8x0 chipset.
-
-The offset address of SP5100 and SB7x0 chipsets are as follows, quote from the
-AMD SB700/710/750 Register Reference Guide(Page 164) and the AMD SP5100
-Register Reference Guide(Page 166).
-
- WatchDogTimerControl 69h
- WatchDogTimerBase0 6Ch
- WatchDogTimerBase1 6Dh
- WatchDogTimerBase2 6Eh
- WatchDogTimerBase3 6Fh
-
-In contrast, the offset address of SB8x0 chipset is as follows, quote from
-AMD SB800-Series Southbridges Register Reference Guide(Page 147).
-
- WatchDogTimerEn 48h
- WatchDogTimerConfig 4Ch
-
-So, In the case of SB8x0 chipset, sp5100_tco reads meaningless MMIO
-address(for example, 0xbafe00) from wrong offset address, and the following
-message is logged.
-
- SP5100 TCO timer: mmio address 0xbafe00 already in use
-
-With this patch, sp5100_tco driver supports SB8x0 chipset, and can avoid
-iomem resource conflict.
-
-Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176
-To: linux-watchdog@vger.kernel.org
-Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com>
-
----
-v1 -> v2
- -Fix typo in module description and source code.
- -Fix a bug that can't correctly determine the watchdog fired.
- -Improve syslog messages.
- -Truncate the commit log, because previous commit log is too long.
----
- drivers/watchdog/sp5100_tco.c | 321 +++++++++++++++++++++++++++++++++++-------
- drivers/watchdog/sp5100_tco.h | 46 ++++--
- 2 files changed, 306 insertions(+), 61 deletions(-)
-
-diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
-index ae5e82c..183fcb2 100644
---- a/drivers/watchdog/sp5100_tco.c
-+++ b/drivers/watchdog/sp5100_tco.c
-@@ -13,7 +13,9 @@
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
-- * See AMD Publication 43009 "AMD SB700/710/750 Register Reference Guide"
-+ * See AMD Publication 43009 "AMD SB700/710/750 Register Reference Guide",
-+ * AMD Publication 45482 "AMD SB800-Series Southbridges Register
-+ * Reference Guide"
- */
-
- /*
-@@ -38,18 +40,24 @@
- #include "sp5100_tco.h"
-
- /* Module and version information */
--#define TCO_VERSION "0.01"
-+#define TCO_VERSION "0.03"
- #define TCO_MODULE_NAME "SP5100 TCO timer"
- #define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
-
- /* internal variables */
- static u32 tcobase_phys;
-+static u32 resbase_phys;
-+static u32 tco_wdt_fired;
- static void __iomem *tcobase;
- static unsigned int pm_iobase;
- static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */
- static unsigned long timer_alive;
- static char tco_expect_close;
- static struct pci_dev *sp5100_tco_pci;
-+static struct resource wdt_res = {
-+ .name = "Watchdog Timer",
-+ .flags = IORESOURCE_MEM,
-+};
-
- /* the watchdog platform device */
- static struct platform_device *sp5100_tco_platform_device;
-@@ -64,9 +72,15 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (default="
-
- static bool nowayout = WATCHDOG_NOWAYOUT;
- module_param(nowayout, bool, 0);
--MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"
-+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
- " (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-+static unsigned int force_addr;
-+module_param(force_addr, uint, 0);
-+MODULE_PARM_DESC(force_addr, "Force the use of specified MMIO address."
-+ " ONLY USE THIS PARAMETER IF YOU REALLY KNOW"
-+ " WHAT YOU ARE DOING (default=none)");
-+
- /*
- * Some TCO specific functions
- */
-@@ -122,6 +136,79 @@ static int tco_timer_set_heartbeat(int t)
- return 0;
- }
-
-+static void tco_timer_enable(void)
-+{
-+ int val;
-+
-+ if (sp5100_tco_pci->revision >= 0x40) {
-+ /* For SB800 or later */
-+ /* Set the Watchdog timer resolution to 1 sec */
-+ outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG);
-+ val = inb(SB800_IO_PM_DATA_REG);
-+ val |= SB800_PM_WATCHDOG_SECOND_RES;
-+ outb(val, SB800_IO_PM_DATA_REG);
-+
-+ /* Enable watchdog decode bit and watchdog timer */
-+ outb(SB800_PM_WATCHDOG_CONTROL, SB800_IO_PM_INDEX_REG);
-+ val = inb(SB800_IO_PM_DATA_REG);
-+ val |= SB800_PCI_WATCHDOG_DECODE_EN;
-+ val &= ~SB800_PM_WATCHDOG_DISABLE;
-+ outb(val, SB800_IO_PM_DATA_REG);
-+ } else {
-+ /* For SP5100 or SB7x0 */
-+ /* Enable watchdog decode bit */
-+ pci_read_config_dword(sp5100_tco_pci,
-+ SP5100_PCI_WATCHDOG_MISC_REG,
-+ &val);
-+
-+ val |= SP5100_PCI_WATCHDOG_DECODE_EN;
-+
-+ pci_write_config_dword(sp5100_tco_pci,
-+ SP5100_PCI_WATCHDOG_MISC_REG,
-+ val);
-+
-+ /* Enable Watchdog timer and set the resolution to 1 sec */
-+ outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
-+ val = inb(SP5100_IO_PM_DATA_REG);
-+ val |= SP5100_PM_WATCHDOG_SECOND_RES;
-+ val &= ~SP5100_PM_WATCHDOG_DISABLE;
-+ outb(val, SP5100_IO_PM_DATA_REG);
-+ }
-+}
-+
-+static void tco_timer_disable(void)
-+{
-+ int val;
-+
-+ if (sp5100_tco_pci->revision >= 0x40) {
-+ /* For SB800 or later */
-+ /* Enable watchdog decode bit and Disable watchdog timer */
-+ outb(SB800_PM_WATCHDOG_CONTROL, SB800_IO_PM_INDEX_REG);
-+ val = inb(SB800_IO_PM_DATA_REG);
-+ val |= SB800_PCI_WATCHDOG_DECODE_EN;
-+ val |= SB800_PM_WATCHDOG_DISABLE;
-+ outb(val, SB800_IO_PM_DATA_REG);
-+ } else {
-+ /* For SP5100 or SB7x0 */
-+ /* Enable watchdog decode bit */
-+ pci_read_config_dword(sp5100_tco_pci,
-+ SP5100_PCI_WATCHDOG_MISC_REG,
-+ &val);
-+
-+ val |= SP5100_PCI_WATCHDOG_DECODE_EN;
-+
-+ pci_write_config_dword(sp5100_tco_pci,
-+ SP5100_PCI_WATCHDOG_MISC_REG,
-+ val);
-+
-+ /* Disable Watchdog timer */
-+ outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
-+ val = inb(SP5100_IO_PM_DATA_REG);
-+ val |= SP5100_PM_WATCHDOG_DISABLE;
-+ outb(val, SP5100_IO_PM_DATA_REG);
-+ }
-+}
-+
- /*
- * /dev/watchdog handling
- */
-@@ -270,11 +357,12 @@ MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl);
- /*
- * Init & exit routines
- */
--
- static unsigned char __devinit sp5100_tco_setupdevice(void)
- {
- struct pci_dev *dev = NULL;
-+ const char *dev_name = NULL;
- u32 val;
-+ u32 index_reg, data_reg, base_addr;
-
- /* Match the PCI device */
- for_each_pci_dev(dev) {
-@@ -287,29 +375,160 @@ static unsigned char __devinit sp5100_tco_setupdevice(void)
- if (!sp5100_tco_pci)
- return 0;
-
-+ pr_info("PCI Revision ID: 0x%x\n", sp5100_tco_pci->revision);
-+
-+ /*
-+ * Determine type of southbridge chipset.
-+ */
-+ if (sp5100_tco_pci->revision >= 0x40) {
-+ dev_name = SB800_DEVNAME;
-+ index_reg = SB800_IO_PM_INDEX_REG;
-+ data_reg = SB800_IO_PM_DATA_REG;
-+ base_addr = SB800_PM_WATCHDOG_BASE;
-+ } else {
-+ dev_name = SP5100_DEVNAME;
-+ index_reg = SP5100_IO_PM_INDEX_REG;
-+ data_reg = SP5100_IO_PM_DATA_REG;
-+ base_addr = SP5100_PM_WATCHDOG_BASE;
-+ }
-+
- /* Request the IO ports used by this driver */
- pm_iobase = SP5100_IO_PM_INDEX_REG;
-- if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, "SP5100 TCO")) {
-+ if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, dev_name)) {
- pr_err("I/O address 0x%04x already in use\n", pm_iobase);
- goto exit;
- }
-
-- /* Find the watchdog base address. */
-- outb(SP5100_PM_WATCHDOG_BASE3, SP5100_IO_PM_INDEX_REG);
-- val = inb(SP5100_IO_PM_DATA_REG);
-- outb(SP5100_PM_WATCHDOG_BASE2, SP5100_IO_PM_INDEX_REG);
-- val = val << 8 | inb(SP5100_IO_PM_DATA_REG);
-- outb(SP5100_PM_WATCHDOG_BASE1, SP5100_IO_PM_INDEX_REG);
-- val = val << 8 | inb(SP5100_IO_PM_DATA_REG);
-- outb(SP5100_PM_WATCHDOG_BASE0, SP5100_IO_PM_INDEX_REG);
-- /* Low three bits of BASE0 are reserved. */
-- val = val << 8 | (inb(SP5100_IO_PM_DATA_REG) & 0xf8);
-+ /*
-+ * First, Find the watchdog timer MMIO address from indirect I/O.
-+ */
-+ outb(base_addr+3, index_reg);
-+ val = inb(data_reg);
-+ outb(base_addr+2, index_reg);
-+ val = val << 8 | inb(data_reg);
-+ outb(base_addr+1, index_reg);
-+ val = val << 8 | inb(data_reg);
-+ outb(base_addr+0, index_reg);
-+ /* Low three bits of BASE are reserved */
-+ val = val << 8 | (inb(data_reg) & 0xf8);
-+
-+ pr_debug("Got 0x%04x from indirect I/O\n", val);
-+
-+ /* Check MMIO address conflict */
-+ if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
-+ dev_name))
-+ goto setup_wdt;
-+ else
-+ pr_debug("MMIO address 0x%04x already in use\n", val);
-+
-+ /*
-+ * Secondly, Find the watchdog timer MMIO address
-+ * from SBResource_MMIO register.
-+ */
-+ if (sp5100_tco_pci->revision >= 0x40) {
-+ /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
-+ outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG);
-+ val = inb(SB800_IO_PM_DATA_REG);
-+ outb(SB800_PM_ACPI_MMIO_EN+2, SB800_IO_PM_INDEX_REG);
-+ val = val << 8 | inb(SB800_IO_PM_DATA_REG);
-+ outb(SB800_PM_ACPI_MMIO_EN+1, SB800_IO_PM_INDEX_REG);
-+ val = val << 8 | inb(SB800_IO_PM_DATA_REG);
-+ outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG);
-+ val = val << 8 | inb(SB800_IO_PM_DATA_REG);
-+ } else {
-+ /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
-+ pci_read_config_dword(sp5100_tco_pci,
-+ SP5100_SB_RESOURCE_MMIO_BASE, &val);
-+ }
-+
-+ /* The SBResource_MMIO is enabled and mapped memory space? */
-+ if ((val & (SB800_ACPI_MMIO_DECODE_EN | SB800_ACPI_MMIO_SEL)) ==
-+ SB800_ACPI_MMIO_DECODE_EN) {
-+ /* Clear unnecessary the low twelve bits */
-+ val &= ~0xFFF;
-+ /* Add the Watchdog Timer offset to base address. */
-+ val += SB800_PM_WDT_MMIO_OFFSET;
-+ /* Check MMIO address conflict */
-+ if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
-+ dev_name)) {
-+ pr_debug("Got 0x%04x from SBResource_MMIO register\n",
-+ val);
-+ goto setup_wdt;
-+ } else
-+ pr_debug("MMIO address 0x%04x already in use\n", val);
-+ } else
-+ pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val);
-+
-+ /*
-+ * Lastly re-programming the watchdog timer MMIO address,
-+ * This method is a last resort...
-+ *
-+ * Before re-programming, to ensure that the watchdog timer
-+ * is disabled, disable the watchdog timer.
-+ */
-+ tco_timer_disable();
-+
-+ if (force_addr) {
-+ /*
-+ * Force the use of watchdog timer MMIO address, and aligned to
-+ * 8byte boundary.
-+ */
-+ force_addr &= ~0x7;
-+ val = force_addr;
-+
-+ pr_info("Force the use of 0x%04x as MMIO address\n", val);
-+ } else {
-+ /*
-+ * Get empty slot into the resource tree for watchdog timer.
-+ */
-+ if (allocate_resource(&iomem_resource,
-+ &wdt_res,
-+ SP5100_WDT_MEM_MAP_SIZE,
-+ 0xf0000000,
-+ 0xfffffff8,
-+ 0x8,
-+ NULL,
-+ NULL)) {
-+ pr_err("MMIO allocation failed\n");
-+ goto unreg_region;
-+ }
-+
-+ val = resbase_phys = wdt_res.start;
-+ pr_debug("Got 0x%04x from resource tree\n", val);
-+ }
-+
-+ /* Restore to the low three bits, if chipset is SB8x0(or later) */
-+ if (sp5100_tco_pci->revision >= 0x40) {
-+ u8 reserved_bit;
-+ reserved_bit = inb(base_addr) & 0x7;
-+ val |= (u32)reserved_bit;
-+ }
-+
-+ /* Re-programming the watchdog timer base address */
-+ outb(base_addr+0, index_reg);
-+ /* Low three bits of BASE are reserved */
-+ outb((val >> 0) & 0xf8, data_reg);
-+ outb(base_addr+1, index_reg);
-+ outb((val >> 8) & 0xff, data_reg);
-+ outb(base_addr+2, index_reg);
-+ outb((val >> 16) & 0xff, data_reg);
-+ outb(base_addr+3, index_reg);
-+ outb((val >> 24) & 0xff, data_reg);
-+
-+ /*
-+ * Clear unnecessary the low three bits,
-+ * if chipset is SB8x0(or later)
-+ */
-+ if (sp5100_tco_pci->revision >= 0x40)
-+ val &= ~0x7;
-
- if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
-- "SP5100 TCO")) {
-- pr_err("mmio address 0x%04x already in use\n", val);
-- goto unreg_region;
-+ dev_name)) {
-+ pr_err("MMIO address 0x%04x already in use\n", val);
-+ goto unreg_resource;
- }
-+
-+setup_wdt:
- tcobase_phys = val;
-
- tcobase = ioremap(val, SP5100_WDT_MEM_MAP_SIZE);
-@@ -318,26 +537,18 @@ static unsigned char __devinit sp5100_tco_setupdevice(void)
- goto unreg_mem_region;
- }
-
-- /* Enable watchdog decode bit */
-- pci_read_config_dword(sp5100_tco_pci,
-- SP5100_PCI_WATCHDOG_MISC_REG,
-- &val);
--
-- val |= SP5100_PCI_WATCHDOG_DECODE_EN;
-+ pr_info("Using 0x%04x for watchdog MMIO address\n", val);
-
-- pci_write_config_dword(sp5100_tco_pci,
-- SP5100_PCI_WATCHDOG_MISC_REG,
-- val);
-+ /* Setup the watchdog timer */
-+ tco_timer_enable();
-
-- /* Enable Watchdog timer and set the resolution to 1 sec. */
-- outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
-- val = inb(SP5100_IO_PM_DATA_REG);
-- val |= SP5100_PM_WATCHDOG_SECOND_RES;
-- val &= ~SP5100_PM_WATCHDOG_DISABLE;
-- outb(val, SP5100_IO_PM_DATA_REG);
--
-- /* Check that the watchdog action is set to reset the system. */
-+ /* Check that the watchdog action is set to reset the system */
- val = readl(SP5100_WDT_CONTROL(tcobase));
-+ /*
-+ * Save WatchDogFired status, because WatchDogFired flag is
-+ * cleared here.
-+ */
-+ tco_wdt_fired = val & SP5100_PM_WATCHDOG_FIRED;
- val &= ~SP5100_PM_WATCHDOG_ACTION_RESET;
- writel(val, SP5100_WDT_CONTROL(tcobase));
-
-@@ -355,6 +566,9 @@ static unsigned char __devinit sp5100_tco_setupdevice(void)
-
- unreg_mem_region:
- release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
-+unreg_resource:
-+ if (resbase_phys)
-+ release_resource(&wdt_res);
- unreg_region:
- release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
- exit:
-@@ -364,23 +578,18 @@ exit:
- static int __devinit sp5100_tco_init(struct platform_device *dev)
- {
- int ret;
-- u32 val;
-+ char addr_str[16];
-
-- /* Check whether or not the hardware watchdog is there. If found, then
-+ /*
-+ * Check whether or not the hardware watchdog is there. If found, then
- * set it up.
- */
- if (!sp5100_tco_setupdevice())
- return -ENODEV;
-
- /* Check to see if last reboot was due to watchdog timeout */
-- pr_info("Watchdog reboot %sdetected\n",
-- readl(SP5100_WDT_CONTROL(tcobase)) & SP5100_PM_WATCHDOG_FIRED ?
-- "" : "not ");
--
-- /* Clear out the old status */
-- val = readl(SP5100_WDT_CONTROL(tcobase));
-- val &= ~SP5100_PM_WATCHDOG_FIRED;
-- writel(val, SP5100_WDT_CONTROL(tcobase));
-+ pr_info("Last reboot was %striggered by watchdog.\n",
-+ tco_wdt_fired ? "" : "not ");
-
- /*
- * Check that the heartbeat value is within it's range.
-@@ -400,14 +609,24 @@ static int __devinit sp5100_tco_init(struct platform_device *dev)
-
- clear_bit(0, &timer_alive);
-
-- pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
-- tcobase, heartbeat, nowayout);
-+ /* Show module parameters */
-+ if (force_addr == tcobase_phys)
-+ /* The force_addr is vaild */
-+ sprintf(addr_str, "0x%04x", force_addr);
-+ else
-+ strcpy(addr_str, "none");
-+
-+ pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d, "
-+ "force_addr=%s)\n",
-+ tcobase, heartbeat, nowayout, addr_str);
-
- return 0;
-
- exit:
- iounmap(tcobase);
- release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
-+ if (resbase_phys)
-+ release_resource(&wdt_res);
- release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
- return ret;
- }
-@@ -422,6 +641,8 @@ static void __devexit sp5100_tco_cleanup(void)
- misc_deregister(&sp5100_tco_miscdev);
- iounmap(tcobase);
- release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
-+ if (resbase_phys)
-+ release_resource(&wdt_res);
- release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
- }
-
-@@ -451,7 +672,7 @@ static int __init sp5100_tco_init_module(void)
- {
- int err;
-
-- pr_info("SP5100 TCO WatchDog Timer Driver v%s\n", TCO_VERSION);
-+ pr_info("SP5100/SB800 TCO WatchDog Timer Driver v%s\n", TCO_VERSION);
-
- err = platform_driver_register(&sp5100_tco_driver);
- if (err)
-@@ -475,13 +696,13 @@ static void __exit sp5100_tco_cleanup_module(void)
- {
- platform_device_unregister(sp5100_tco_platform_device);
- platform_driver_unregister(&sp5100_tco_driver);
-- pr_info("SP5100 TCO Watchdog Module Unloaded\n");
-+ pr_info("SP5100/SB800 TCO Watchdog Module Unloaded\n");
- }
-
- module_init(sp5100_tco_init_module);
- module_exit(sp5100_tco_cleanup_module);
-
- MODULE_AUTHOR("Priyanka Gupta");
--MODULE_DESCRIPTION("TCO timer driver for SP5100 chipset");
-+MODULE_DESCRIPTION("TCO timer driver for SP5100/SB800 chipset");
- MODULE_LICENSE("GPL");
- MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h
-index a5a16cc..71594a0 100644
---- a/drivers/watchdog/sp5100_tco.h
-+++ b/drivers/watchdog/sp5100_tco.h
-@@ -9,33 +9,57 @@
- /*
- * Some address definitions for the Watchdog
- */
--
- #define SP5100_WDT_MEM_MAP_SIZE 0x08
- #define SP5100_WDT_CONTROL(base) ((base) + 0x00) /* Watchdog Control */
- #define SP5100_WDT_COUNT(base) ((base) + 0x04) /* Watchdog Count */
-
--#define SP5100_WDT_START_STOP_BIT 1
-+#define SP5100_WDT_START_STOP_BIT (1 << 0)
- #define SP5100_WDT_TRIGGER_BIT (1 << 7)
-
--#define SP5100_PCI_WATCHDOG_MISC_REG 0x41
--#define SP5100_PCI_WATCHDOG_DECODE_EN (1 << 3)
--
- #define SP5100_PM_IOPORTS_SIZE 0x02
-
--/* These two IO registers are hardcoded and there doesn't seem to be a way to
-+/*
-+ * These two IO registers are hardcoded and there doesn't seem to be a way to
- * read them from a register.
- */
-+
-+/* For SP5100/SB7x0 chipset */
- #define SP5100_IO_PM_INDEX_REG 0xCD6
- #define SP5100_IO_PM_DATA_REG 0xCD7
-
-+#define SP5100_SB_RESOURCE_MMIO_BASE 0x9C
-+
- #define SP5100_PM_WATCHDOG_CONTROL 0x69
--#define SP5100_PM_WATCHDOG_BASE0 0x6C
--#define SP5100_PM_WATCHDOG_BASE1 0x6D
--#define SP5100_PM_WATCHDOG_BASE2 0x6E
--#define SP5100_PM_WATCHDOG_BASE3 0x6F
-+#define SP5100_PM_WATCHDOG_BASE 0x6C
-
- #define SP5100_PM_WATCHDOG_FIRED (1 << 1)
- #define SP5100_PM_WATCHDOG_ACTION_RESET (1 << 2)
-
--#define SP5100_PM_WATCHDOG_DISABLE 1
-+#define SP5100_PCI_WATCHDOG_MISC_REG 0x41
-+#define SP5100_PCI_WATCHDOG_DECODE_EN (1 << 3)
-+
-+#define SP5100_PM_WATCHDOG_DISABLE (1 << 0)
- #define SP5100_PM_WATCHDOG_SECOND_RES (3 << 1)
-+
-+#define SP5100_DEVNAME "SP5100 TCO"
-+
-+
-+/* For SB8x0(or later) chipset */
-+#define SB800_IO_PM_INDEX_REG 0xCD6
-+#define SB800_IO_PM_DATA_REG 0xCD7
-+
-+#define SB800_PM_ACPI_MMIO_EN 0x24
-+#define SB800_PM_WATCHDOG_CONTROL 0x48
-+#define SB800_PM_WATCHDOG_BASE 0x48
-+#define SB800_PM_WATCHDOG_CONFIG 0x4C
-+
-+#define SB800_PCI_WATCHDOG_DECODE_EN (1 << 0)
-+#define SB800_PM_WATCHDOG_DISABLE (1 << 2)
-+#define SB800_PM_WATCHDOG_SECOND_RES (3 << 0)
-+#define SB800_ACPI_MMIO_DECODE_EN (1 << 0)
-+#define SB800_ACPI_MMIO_SEL (1 << 2)
-+
-+
-+#define SB800_PM_WDT_MMIO_OFFSET 0xB00
-+
-+#define SB800_DEVNAME "SB800 TCO"
---
-1.7.11.7
-
-From eba48cd0f05ff7a2f82291feae169c14b61b29af Mon Sep 17 00:00:00 2001
-From: Andrew Cooks <acooks@gmail.com>
-Date: Tue, 13 Nov 2012 12:39:07 +0800
-Subject: [PATCH] PCI: Add GPL license for drivers/pci/ioapic module
-
-Config PCI_IOAPIC turned into a tristate in commit b95a7bd70046, but no
-module license is specified. This adds the missing module license.
-
-Signed-off-by: Andrew Cooks <acooks@gmail.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Acked-by: Jan Beulich <jbeulich@suse.com>
----
- drivers/pci/ioapic.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/pci/ioapic.c b/drivers/pci/ioapic.c
-index 205af8d..22436f7 100644
---- a/drivers/pci/ioapic.c
-+++ b/drivers/pci/ioapic.c
-@@ -125,3 +125,5 @@ static void __exit ioapic_exit(void)
-
- module_init(ioapic_init);
- module_exit(ioapic_exit);
-+
-+MODULE_LICENSE("GPL");
---
-1.7.6.5
-