---- linux-2.6.15.6/drivers/input/joystick/iforce/iforce-serio.c 2006-03-05 19:07:54.000000000 +0000
-+++ linux-2.6.15.6.iforce/drivers/input/joystick/iforce/iforce-serio.c 2006-04-29 23:17:59.000000000 +0000
-@@ -175,6 +175,12 @@
- .id = SERIO_ANY,
- .extra = SERIO_ANY,
- },
-+ {
-+ .type = SERIO_RS232,
-+ .proto = 0x1f, // Trust ForceFeedback Race Master
-+ .id = SERIO_ANY,
-+ .extra = SERIO_ANY,
-+ },
- { 0 }
- };
-
---- linux-2.6.27/arch/powerpc/include/asm/io.h~ 2006-06-18 01:49:35.000000000 +0000
-+++ linux-2.6.27/arch/powerpc/include/asm/io.h 2006-06-22 02:44:19.000000000 +0000
-@@ -445,6 +445,10 @@
- #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
- #define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
-
-+#define isa_virt_to_bus virt_to_phys
-+#define isa_page_to_bus page_to_phys
-+#define isa_bus_to_virt phys_to_virt
-+
- /* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- */
---- linux-2.6.27/arch/powerpc/include/asm/suspend.h 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.27/arch/powerpc/include/asm/suspend.h 2007-08-28 23:26:16.629658848 +0200
-@@ -6,4 +6,7 @@
- void save_processor_state(void);
- void restore_processor_state(void);
-
-+#define suspend2_faulted (0)
-+#define clear_suspend2_fault() do { } while(0)
-+
- #endif /* __ASM_POWERPC_SUSPEND_H */
---- linux-2.6.26/arch/powerpc/kernel/swsusp.c 2008-09-29 00:01:56.000000000 +0200
-+++ linux-2.6.26/arch/powerpc/kernel/swsusp.c 2008-09-29 00:01:42.000000000 +0200
-@@ -9,6 +9,7 @@
- * 2 of the License, or (at your option) any later version.
- */
-
-+#include <linux/module.h>
- #include <linux/sched.h>
- #include <asm/suspend.h>
- #include <asm/system.h>
-@@ -30,6 +31,7 @@
- #endif
-
- }
-+EXPORT_SYMBOL(save_processor_state);
-
- void restore_processor_state(void)
- {
-
---- linux-2.6.32/drivers/infiniband/Kconfig~ 2009-12-05 00:26:03.663774916 +0100
-+++ linux-2.6.32/drivers/infiniband/Kconfig 2009-12-05 00:26:05.914179759 +0100
-@@ -37,7 +37,6 @@
- config INFINIBAND_ADDR_TRANS
- bool
- depends on INET
-- depends on !(INFINIBAND = y && IPV6 = m)
- default y
-
- source "drivers/infiniband/hw/mthca/Kconfig"
--- linux-2.6.33/scripts/mod/modpost.c~ 2010-02-24 19:52:17.000000000 +0100
+++ linux-2.6.33/scripts/mod/modpost.c 2010-03-07 14:26:47.242168558 +0100
@@ -15,7 +15,8 @@
/* Some toolchains use a `_' prefix for all user symbols. */
-commit 87b09f1f25cd1e01d7c50bf423c7fe33027d7511
-Author: stephen hemminger <shemminger@vyatta.com>
-Date: Fri Feb 12 06:58:00 2010 +0000
-
- sky2: dont enable PME legacy mode
-
- This bit is not changed by vendor driver, and should be left alone.
- The documentation implies this a debug bit.
- 0 = WAKE# only asserted when VMAIN not available
- 1 = WAKE# is depend on wake events and independent of VMAIN.
-
- Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-diff --git b/drivers/net/sky2.c a/drivers/net/sky2.c
-index 2494842..edf37aa 100644
---- b/drivers/net/sky2.c
-+++ a/drivers/net/sky2.c
-@@ -733,6 +733,7 @@ static void sky2_wol_init(struct sky2_port *sky2)
- unsigned port = sky2->port;
- enum flow_control save_mode;
- u16 ctrl;
-+ u32 reg1;
+--- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
++++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
+@@ -9,6 +9,12 @@
+ $cc -print-file-name=lib${lib}.${ext} | grep -q /
+ if [ $? -eq 0 ]; then
+ echo "-l${lib}"
++ for libt in tinfow tinfo ; do
++ $cc -print-file-name=lib${libt}.${ext} | grep -q /
++ if [ $? -eq 0 ]; then
++ echo "-l${libt}"
++ fi
++ done
+ exit
+ fi
+ done
+
+diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
+index 7a0c800..ec5ebbb 100644
+--- a/drivers/net/ethernet/realtek/r8169.c
++++ b/drivers/net/ethernet/realtek/r8169.c
+@@ -6927,6 +6927,14 @@ rtl_init_one(struct pci_dev *pdev, const
+ for (i = 0; i < ETH_ALEN; i++)
+ dev->dev_addr[i] = RTL_R8(MAC0 + i);
+
++ if (!is_valid_ether_addr(dev->dev_addr)) {
++ /* Report it and use a random ethernet address instead */
++ netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
++ random_ether_addr(dev->dev_addr);
++ netdev_info(dev, "Using random MAC address: %pM\n",
++ dev->dev_addr);
++ }
++
+ SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
+ dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
- /* Bring hardware out of reset */
- sky2_write16(hw, B0_CTST, CS_RST_CLR);
-@@ -786,6 +787,11 @@ static void sky2_wol_init(struct sky2_port *sky2)
- /* Disable PiG firmware */
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
+[PATCH] SCSI: Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
+
+If a device has the skip_vpd_pages flag set we should simply fail the
+scsi_get_vpd_page() call.
+
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Acked-by: Alan Stern <stern@rowland.harvard.edu>
+Tested-by: Stuart Foster <smf.linux@ntlworld.com>
+Cc: stable@vger.kernel.org
+
+diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
+index 3b1ea34..eaa808e 100644
+--- a/drivers/scsi/scsi.c
++++ b/drivers/scsi/scsi.c
+@@ -1031,6 +1031,9 @@
+ {
+ int i, result;
-+ /* Turn on legacy PCI-Express PME mode */
-+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-+ reg1 |= PCI_Y2_PME_LEGACY;
-+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
++ if (sdev->skip_vpd_pages)
++ goto fail;
+
- /* block receiver */
- sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- }
+ /* Ask for all the pages supported by this device */
+ result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
+ if (result)
+From 1e2ee49f7f1b79f0b14884fe6a602f0411b39552 Mon Sep 17 00:00:00 2001
+From: Will Woods <wwoods@redhat.com>
+Date: Tue, 6 May 2014 12:50:10 -0700
+Subject: fanotify: fix -EOVERFLOW with large files on 64-bit
---- linux-2.6.37/fs//xfs/linux-2.6/xfs_super.c.org 2011-03-23 09:08:50.511734576 +0100
-+++ linux-2.6.37/fs//xfs/linux-2.6/xfs_super.c 2011-03-23 09:13:58.385845623 +0100
-@@ -1566,13 +1566,17 @@
- if (error)
- goto out_free_sb;
-
-- error = xfs_mountfs(mp);
-- if (error)
-- goto out_filestream_unmount;
--
- if (mp->m_flags & XFS_MOUNT_TAGGED)
- sb->s_flags |= MS_TAGGED;
-
+On 64-bit systems, O_LARGEFILE is automatically added to flags inside
+the open() syscall (also openat(), blkdev_open(), etc). Userspace
+therefore defines O_LARGEFILE to be 0 - you can use it, but it's a
+no-op. Everything should be O_LARGEFILE by default.
+
+But: when fanotify does create_fd() it uses dentry_open(), which skips
+all that. And userspace can't set O_LARGEFILE in fanotify_init()
+because it's defined to 0. So if fanotify gets an event regarding a
+large file, the read() will just fail with -EOVERFLOW.
+
+This patch adds O_LARGEFILE to fanotify_init()'s event_f_flags on 64-bit
+systems, using the same test as open()/openat()/etc.
+
+Addresses https://bugzilla.redhat.com/show_bug.cgi?id=696821
+
+Signed-off-by: Will Woods <wwoods@redhat.com>
+Acked-by: Eric Paris <eparis@redhat.com>
+Reviewed-by: Jan Kara <jack@suse.cz>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+
+diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
+index 4e565c8..732648b 100644
+--- a/fs/notify/fanotify/fanotify_user.c
++++ b/fs/notify/fanotify/fanotify_user.c
+@@ -698,6 +698,8 @@ SYSCALL_DEFINE2(fanotify_init, unsigned int, flags, unsigned int, event_f_flags)
+ }
+ group->overflow_event = &oevent->fse;
+
++ if (force_o_largefile())
++ event_f_flags |= O_LARGEFILE;
+ group->fanotify_data.f_flags = event_f_flags;
+ #ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ spin_lock_init(&group->fanotify_data.access_lock);
+--
+cgit v0.10.1
+From 29183a70b0b828500816bd794b3fe192fce89f73 Mon Sep 17 00:00:00 2001
+From: John Stultz <john.stultz@linaro.org>
+Date: Mon, 9 Feb 2015 23:30:36 -0800
+Subject: ntp: Fixup adjtimex freq validation on 32-bit systems
+
+Additional validation of adjtimex freq values to avoid
+potential multiplication overflows were added in commit
+5e5aeb4367b (time: adjtimex: Validate the ADJ_FREQUENCY values)
+
+Unfortunately the patch used LONG_MAX/MIN instead of
+LLONG_MAX/MIN, which was fine on 64-bit systems, but being
+much smaller on 32-bit systems caused false positives
+resulting in most direct frequency adjustments to fail w/
+EINVAL.
+
+ntpd only does direct frequency adjustments at startup, so
+the issue was not as easily observed there, but other time
+sync applications like ptpd and chrony were more effected by
+the bug.
+
+See bugs:
+
+ https://bugzilla.kernel.org/show_bug.cgi?id=92481
+ https://bugzilla.redhat.com/show_bug.cgi?id=1188074
+
+This patch changes the checks to use LLONG_MAX for
+clarity, and additionally the checks are disabled
+on 32-bit systems since LLONG_MAX/PPM_SCALE is always
+larger then the 32-bit long freq value, so multiplication
+overflows aren't possible there.
+
+Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
+Reported-by: George Joseph <george.joseph@fairview5.com>
+Tested-by: George Joseph <george.joseph@fairview5.com>
+Signed-off-by: John Stultz <john.stultz@linaro.org>
+Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
+Cc: <stable@vger.kernel.org> # v3.19+
+Cc: Linus Torvalds <torvalds@linux-foundation.org>
+Cc: Sasha Levin <sasha.levin@oracle.com>
+Link: http://lkml.kernel.org/r/1423553436-29747-1-git-send-email-john.stultz@linaro.org
+[ Prettified the changelog and the comments a bit. ]
+Signed-off-by: Ingo Molnar <mingo@kernel.org>
+
+diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
+index 4b585e0..0f60b08 100644
+--- a/kernel/time/ntp.c
++++ b/kernel/time/ntp.c
+@@ -633,10 +633,14 @@ int ntp_validate_timex(struct timex *txc)
+ if ((txc->modes & ADJ_SETOFFSET) && (!capable(CAP_SYS_TIME)))
+ return -EPERM;
+
+- if (txc->modes & ADJ_FREQUENCY) {
+- if (LONG_MIN / PPM_SCALE > txc->freq)
+ /*
-+ * we must configure the block size in the superblock before we run the
-+ * full mount process as the mount process can lookup and cache inodes.
-+ * For the same reason we must also initialise the syncd and register
-+ * the inode cache shrinker so that inodes can be reclaimed during
-+ * operations like a quotacheck that iterate all inodes in the
-+ * filesystem.
++ * Check for potential multiplication overflows that can
++ * only happen on 64-bit systems:
+ */
- sb->s_magic = XFS_SB_MAGIC;
- sb->s_blocksize = mp->m_sb.sb_blocksize;
- sb->s_blocksize_bits = ffs(sb->s_blocksize) - 1;
-@@ -1580,6 +1584,16 @@
- sb->s_time_gran = 1;
- set_posix_acl_flag(sb);
-
-+ error = xfs_syncd_init(mp);
-+ if (error)
-+ goto out_filestream_unmount;
-+
-+ xfs_inode_shrinker_register(mp);
-+
-+ error = xfs_mountfs(mp);
-+ if (error)
-+ goto out_syncd_stop;
-+
- root = igrab(VFS_I(mp->m_rootip));
- if (!root) {
- error = ENOENT;
-@@ -1595,14 +1609,11 @@
- goto fail_vnrele;
++ if ((txc->modes & ADJ_FREQUENCY) && (BITS_PER_LONG == 64)) {
++ if (LLONG_MIN / PPM_SCALE > txc->freq)
+ return -EINVAL;
+- if (LONG_MAX / PPM_SCALE < txc->freq)
++ if (LLONG_MAX / PPM_SCALE < txc->freq)
+ return -EINVAL;
}
-- error = xfs_syncd_init(mp);
-- if (error)
-- goto fail_vnrele;
--
-- xfs_inode_shrinker_register(mp);
--
- return 0;
-
-+ out_syncd_stop:
-+ xfs_inode_shrinker_unregister(mp);
-+ xfs_syncd_stop(mp);
- out_filestream_unmount:
- xfs_filestream_unmount(mp);
- out_free_sb:
-@@ -1626,6 +1637,9 @@
- }
-
- fail_unmount:
-+ xfs_inode_shrinker_unregister(mp);
-+ xfs_syncd_stop(mp);
-+
- /*
- * Blow away any referenced inode in the filestreams cache.
- * This can and will cause log traffic as inodes go inactive
+--
+cgit v0.10.2
+
projects / packages / kernel.git / blobdiff