---- linux-2.6.15.6/drivers/input/joystick/iforce/iforce-serio.c 2006-03-05 19:07:54.000000000 +0000
-+++ linux-2.6.15.6.iforce/drivers/input/joystick/iforce/iforce-serio.c 2006-04-29 23:17:59.000000000 +0000
-@@ -175,6 +175,12 @@
- .id = SERIO_ANY,
- .extra = SERIO_ANY,
- },
-+ {
-+ .type = SERIO_RS232,
-+ .proto = 0x1f, // Trust ForceFeedback Race Master
-+ .id = SERIO_ANY,
-+ .extra = SERIO_ANY,
-+ },
- { 0 }
- };
-
---- linux-2.6.27/arch/powerpc/include/asm/io.h~ 2006-06-18 01:49:35.000000000 +0000
-+++ linux-2.6.27/arch/powerpc/include/asm/io.h 2006-06-22 02:44:19.000000000 +0000
-@@ -445,6 +445,10 @@
- #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
- #define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
-
-+#define isa_virt_to_bus virt_to_phys
-+#define isa_page_to_bus page_to_phys
-+#define isa_bus_to_virt phys_to_virt
-+
- /* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- */
---- linux-2.6.27/arch/powerpc/include/asm/suspend.h 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.27/arch/powerpc/include/asm/suspend.h 2007-08-28 23:26:16.629658848 +0200
-@@ -6,4 +6,7 @@
- void save_processor_state(void);
- void restore_processor_state(void);
-
-+#define suspend2_faulted (0)
-+#define clear_suspend2_fault() do { } while(0)
-+
- #endif /* __ASM_POWERPC_SUSPEND_H */
---- linux-2.6.26/arch/powerpc/kernel/swsusp.c 2008-09-29 00:01:56.000000000 +0200
-+++ linux-2.6.26/arch/powerpc/kernel/swsusp.c 2008-09-29 00:01:42.000000000 +0200
-@@ -9,6 +9,7 @@
- * 2 of the License, or (at your option) any later version.
- */
-
-+#include <linux/module.h>
- #include <linux/sched.h>
- #include <asm/suspend.h>
- #include <asm/system.h>
-@@ -30,6 +31,7 @@
- #endif
-
- }
-+EXPORT_SYMBOL(save_processor_state);
-
- void restore_processor_state(void)
- {
-
---- linux-2.6.32/drivers/infiniband/Kconfig~ 2009-12-05 00:26:03.663774916 +0100
-+++ linux-2.6.32/drivers/infiniband/Kconfig 2009-12-05 00:26:05.914179759 +0100
-@@ -37,7 +37,6 @@
- config INFINIBAND_ADDR_TRANS
- bool
- depends on INET
-- depends on !(INFINIBAND = y && IPV6 = m)
- default y
-
- source "drivers/infiniband/hw/mthca/Kconfig"
--- linux-2.6.33/scripts/mod/modpost.c~ 2010-02-24 19:52:17.000000000 +0100
+++ linux-2.6.33/scripts/mod/modpost.c 2010-03-07 14:26:47.242168558 +0100
@@ -15,7 +15,8 @@
#include "../../include/linux/license.h"
/* Some toolchains use a `_' prefix for all user symbols. */
+
+--- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
++++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
+@@ -9,6 +9,12 @@
+ $cc -print-file-name=lib${lib}.${ext} | grep -q /
+ if [ $? -eq 0 ]; then
+ echo "-l${lib}"
++ for libt in tinfow tinfo ; do
++ $cc -print-file-name=lib${libt}.${ext} | grep -q /
++ if [ $? -eq 0 ]; then
++ echo "-l${libt}"
++ fi
++ done
+ exit
+ fi
+ done
+
+diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
+index 7a0c800..ec5ebbb 100644
+--- a/drivers/net/ethernet/realtek/r8169.c
++++ b/drivers/net/ethernet/realtek/r8169.c
+@@ -6927,6 +6927,14 @@ rtl_init_one(struct pci_dev *pdev, const
+ for (i = 0; i < ETH_ALEN; i++)
+ dev->dev_addr[i] = RTL_R8(MAC0 + i);
+
++ if (!is_valid_ether_addr(dev->dev_addr)) {
++ /* Report it and use a random ethernet address instead */
++ netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
++ random_ether_addr(dev->dev_addr);
++ netdev_info(dev, "Using random MAC address: %pM\n",
++ dev->dev_addr);
++ }
++
+ SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
+ dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
+
+[PATCH] SCSI: Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
+
+If a device has the skip_vpd_pages flag set we should simply fail the
+scsi_get_vpd_page() call.
+
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Acked-by: Alan Stern <stern@rowland.harvard.edu>
+Tested-by: Stuart Foster <smf.linux@ntlworld.com>
+Cc: stable@vger.kernel.org
+
+diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
+index 3b1ea34..eaa808e 100644
+--- a/drivers/scsi/scsi.c
++++ b/drivers/scsi/scsi.c
+@@ -1031,6 +1031,9 @@
+ {
+ int i, result;
+
++ if (sdev->skip_vpd_pages)
++ goto fail;
++
+ /* Ask for all the pages supported by this device */
+ result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
+ if (result)
+
+From 1e2ee49f7f1b79f0b14884fe6a602f0411b39552 Mon Sep 17 00:00:00 2001
+From: Will Woods <wwoods@redhat.com>
+Date: Tue, 6 May 2014 12:50:10 -0700
+Subject: fanotify: fix -EOVERFLOW with large files on 64-bit
+
+On 64-bit systems, O_LARGEFILE is automatically added to flags inside
+the open() syscall (also openat(), blkdev_open(), etc). Userspace
+therefore defines O_LARGEFILE to be 0 - you can use it, but it's a
+no-op. Everything should be O_LARGEFILE by default.
+
+But: when fanotify does create_fd() it uses dentry_open(), which skips
+all that. And userspace can't set O_LARGEFILE in fanotify_init()
+because it's defined to 0. So if fanotify gets an event regarding a
+large file, the read() will just fail with -EOVERFLOW.
+
+This patch adds O_LARGEFILE to fanotify_init()'s event_f_flags on 64-bit
+systems, using the same test as open()/openat()/etc.
+
+Addresses https://bugzilla.redhat.com/show_bug.cgi?id=696821
+
+Signed-off-by: Will Woods <wwoods@redhat.com>
+Acked-by: Eric Paris <eparis@redhat.com>
+Reviewed-by: Jan Kara <jack@suse.cz>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+
+diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
+index 4e565c8..732648b 100644
+--- a/fs/notify/fanotify/fanotify_user.c
++++ b/fs/notify/fanotify/fanotify_user.c
+@@ -698,6 +698,8 @@ SYSCALL_DEFINE2(fanotify_init, unsigned int, flags, unsigned int, event_f_flags)
+ }
+ group->overflow_event = &oevent->fse;
+
++ if (force_o_largefile())
++ event_f_flags |= O_LARGEFILE;
+ group->fanotify_data.f_flags = event_f_flags;
+ #ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ spin_lock_init(&group->fanotify_data.access_lock);
+--- a/drivers/pnp/pnpbios/bioscalls.c 2014-03-31 05:40:15.000000000 +0200
++++ b/drivers/pnp/pnpbios/bioscalls.c 2015-08-30 20:34:09.000000000 +0200
+@@ -21,7 +21,7 @@
+
+ #include "pnpbios.h"
+
+-static struct {
++__visible struct {
+ u16 offset;
+ u16 segment;
+ } pnp_bios_callpoint;
+@@ -37,10 +37,11 @@
+ * kernel begins at offset 3GB...
+ */
+
+-asmlinkage void pnp_bios_callfunc(void);
++asmlinkage __visible void pnp_bios_callfunc(void);
+
+ __asm__(".text \n"
+ __ALIGN_STR "\n"
++ ".globl pnp_bios_callfunc\n"
+ "pnp_bios_callfunc:\n"
+ " pushl %edx \n"
+ " pushl %ecx \n"
+@@ -66,9 +67,9 @@
+ * after PnP BIOS oopses.
+ */
+
+-u32 pnp_bios_fault_esp;
+-u32 pnp_bios_fault_eip;
+-u32 pnp_bios_is_utter_crap = 0;
++__visible u32 pnp_bios_fault_esp;
++__visible u32 pnp_bios_fault_eip;
++__visible u32 pnp_bios_is_utter_crap = 0;
+
+ static spinlock_t pnp_bios_lock;
+
projects / packages / kernel.git / blobdiff