/* Some toolchains use a `_' prefix for all user symbols. */
-From: Stephen Hemminger <shemminger@vyatta.com>
-
-Some BIOS's don't setup power management correctly (what else is
-new) and don't allow use of PCI Express power control. Add a special
-exception module parameter to allow working around this issue.
-Based on slightly different patch by Knut Petersen.
-
-Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
-Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
----
-Patch against -net (ie. 3.3.0)
-
---- a/drivers/net/ethernet/marvell/sky2.c 2012-01-10 10:56:56.855156017 -0800
-+++ b/drivers/net/ethernet/marvell/sky2.c 2012-03-21 08:25:52.400929532 -0700
-@@ -95,6 +95,10 @@ static int disable_msi = 0;
- module_param(disable_msi, int, 0);
- MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-
-+static int legacy_pme = 0;
-+module_param(legacy_pme, int, 0);
-+MODULE_PARM_DESC(legacy_pme, "Legacy power management");
-+
- static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
- { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
-@@ -867,6 +871,13 @@ static void sky2_wol_init(struct sky2_po
- /* Disable PiG firmware */
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
-
-+ /* Needed by some broken BIOSes, use PCI rather than PCI-e for WOL */
-+ if (legacy_pme) {
-+ u32 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-+ reg1 |= PCI_Y2_PME_LEGACY;
-+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-+ }
-+
- /* block receiver */
- sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- sky2_read32(hw, B0_CTST);
-
-
-The RCU problem is likely to be a separate issue. It might even be a
-result of the use-after-free problem with the elevator.
-
-At any rate, it's clear that the crash in the refcounting log you
-posted occurred because scsi_setup_blk_pc_cmnd() called
-scsi_prep_state_check(), which tried to dereference the NULL pointer.
-
-Would you like to try this patch to see if it fixes the problem? As I
-said before, I'm not certain it's the best thing to do, but it worked
-on my system.
-
-Alan Stern
-
-
-Index: usb-3.0/drivers/scsi/scsi_lib.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_lib.c
-+++ usb-3.0/drivers/scsi/scsi_lib.c
-@@ -1247,6 +1247,8 @@ int scsi_prep_fn(struct request_queue *q
- struct scsi_device *sdev = q->queuedata;
- int ret = BLKPREP_KILL;
-
-+ if (!sdev)
-+ return ret;
- if (req->cmd_type == REQ_TYPE_BLOCK_PC)
- ret = scsi_setup_blk_pc_cmnd(sdev, req);
- return scsi_prep_return(q, req, ret);
-Index: usb-3.0/drivers/scsi/scsi_sysfs.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_sysfs.c
-+++ usb-3.0/drivers/scsi/scsi_sysfs.c
-@@ -322,6 +322,8 @@ static void scsi_device_dev_release_user
- kfree(evt);
- }
-
-+ /* Freeing the queue signals to block that we're done */
-+ scsi_free_queue(sdev->request_queue);
- blk_put_queue(sdev->request_queue);
- /* NULL queue means the device can't be used */
- sdev->request_queue = NULL;
-@@ -936,8 +938,6 @@ void __scsi_remove_device(struct scsi_de
- /* cause the request function to reject all I/O requests */
- sdev->request_queue->queuedata = NULL;
-
-- /* Freeing the queue signals to block that we're done */
-- scsi_free_queue(sdev->request_queue);
- put_device(dev);
- }
-
-
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-Please read the FAQ at http://www.tux.org/lkml/
--- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
+++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
@@ -9,6 +9,12 @@
exit
fi
done
-
-
-
+From 5d12f71723762a39435d054d02bbf5fb87c5cd14 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Arkadiusz=20Mi=C5=9Bkiewicz?= <arekm@maven.pl>
+Date: Mon, 6 Feb 2017 14:45:15 +0100
+Subject: [PATCH] mac80211: Print text for disassociation reason
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When disassociation happens only numeric reason is printed
+in ieee80211_rx_mgmt_disassoc(). Add text variant, too.
+
+Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
+---
+ net/mac80211/mlme.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
+index 098ce9b179ee..fcf8d0aa66ec 100644
+--- a/net/mac80211/mlme.c
++++ b/net/mac80211/mlme.c
+@@ -2801,8 +2801,9 @@ static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
+
+ reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
+
+- sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
+- mgmt->sa, reason_code);
++ sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
++ mgmt->sa, reason_code,
++ ieee80211_get_reason_code_string(reason_code));
+
+ ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
+
+--
+2.11.0
projects / packages / kernel.git / blobdiff