---- linux-2.6.15.6/drivers/input/joystick/iforce/iforce-serio.c 2006-03-05 19:07:54.000000000 +0000
-+++ linux-2.6.15.6.iforce/drivers/input/joystick/iforce/iforce-serio.c 2006-04-29 23:17:59.000000000 +0000
-@@ -175,6 +175,12 @@
- .id = SERIO_ANY,
- .extra = SERIO_ANY,
- },
-+ {
-+ .type = SERIO_RS232,
-+ .proto = 0x1f, // Trust ForceFeedback Race Master
-+ .id = SERIO_ANY,
-+ .extra = SERIO_ANY,
-+ },
- { 0 }
- };
-
---- linux-2.6.27/arch/powerpc/include/asm/io.h~ 2006-06-18 01:49:35.000000000 +0000
-+++ linux-2.6.27/arch/powerpc/include/asm/io.h 2006-06-22 02:44:19.000000000 +0000
-@@ -445,6 +445,10 @@
- #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
- #define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
-
-+#define isa_virt_to_bus virt_to_phys
-+#define isa_page_to_bus page_to_phys
-+#define isa_bus_to_virt phys_to_virt
-+
- /* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- */
---- linux-2.6.27/arch/powerpc/include/asm/suspend.h 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.27/arch/powerpc/include/asm/suspend.h 2007-08-28 23:26:16.629658848 +0200
-@@ -6,4 +6,7 @@
- void save_processor_state(void);
- void restore_processor_state(void);
-
-+#define suspend2_faulted (0)
-+#define clear_suspend2_fault() do { } while(0)
-+
- #endif /* __ASM_POWERPC_SUSPEND_H */
---- linux-2.6.26/arch/powerpc/kernel/swsusp.c 2008-09-29 00:01:56.000000000 +0200
-+++ linux-2.6.26/arch/powerpc/kernel/swsusp.c 2008-09-29 00:01:42.000000000 +0200
-@@ -9,6 +9,7 @@
- * 2 of the License, or (at your option) any later version.
- */
-
-+#include <linux/module.h>
- #include <linux/sched.h>
- #include <asm/suspend.h>
- #include <asm/system.h>
-@@ -30,6 +31,7 @@
- #endif
-
- }
-+EXPORT_SYMBOL(save_processor_state);
-
- void restore_processor_state(void)
- {
-
---- linux-2.6.32/drivers/infiniband/Kconfig~ 2009-12-05 00:26:03.663774916 +0100
-+++ linux-2.6.32/drivers/infiniband/Kconfig 2009-12-05 00:26:05.914179759 +0100
-@@ -37,7 +37,6 @@
- config INFINIBAND_ADDR_TRANS
- bool
- depends on INET
-- depends on !(INFINIBAND = y && IPV6 = m)
- default y
-
- source "drivers/infiniband/hw/mthca/Kconfig"
--- linux-2.6.33/scripts/mod/modpost.c~ 2010-02-24 19:52:17.000000000 +0100
+++ linux-2.6.33/scripts/mod/modpost.c 2010-03-07 14:26:47.242168558 +0100
@@ -15,7 +15,8 @@
/* Some toolchains use a `_' prefix for all user symbols. */
-commit 87b09f1f25cd1e01d7c50bf423c7fe33027d7511
-Author: stephen hemminger <shemminger@vyatta.com>
-Date: Fri Feb 12 06:58:00 2010 +0000
+--- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
++++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
+@@ -9,6 +9,12 @@
+ $cc -print-file-name=lib${lib}.${ext} | grep -q /
+ if [ $? -eq 0 ]; then
+ echo "-l${lib}"
++ for libt in tinfow tinfo ; do
++ $cc -print-file-name=lib${libt}.${ext} | grep -q /
++ if [ $? -eq 0 ]; then
++ echo "-l${libt}"
++ fi
++ done
+ exit
+ fi
+ done
- sky2: dont enable PME legacy mode
+diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
+index 7a0c800..ec5ebbb 100644
+--- a/drivers/net/ethernet/realtek/r8169.c
++++ b/drivers/net/ethernet/realtek/r8169.c
+@@ -6927,6 +6927,14 @@ rtl_init_one(struct pci_dev *pdev, const
+ for (i = 0; i < ETH_ALEN; i++)
+ dev->dev_addr[i] = RTL_R8(MAC0 + i);
+
++ if (!is_valid_ether_addr(dev->dev_addr)) {
++ /* Report it and use a random ethernet address instead */
++ netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
++ random_ether_addr(dev->dev_addr);
++ netdev_info(dev, "Using random MAC address: %pM\n",
++ dev->dev_addr);
++ }
++
+ SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
+ dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
+
+[PATCH] SCSI: Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
+
+If a device has the skip_vpd_pages flag set we should simply fail the
+scsi_get_vpd_page() call.
+
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Acked-by: Alan Stern <stern@rowland.harvard.edu>
+Tested-by: Stuart Foster <smf.linux@ntlworld.com>
+Cc: stable@vger.kernel.org
+
+diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
+index 3b1ea34..eaa808e 100644
+--- a/drivers/scsi/scsi.c
++++ b/drivers/scsi/scsi.c
+@@ -1031,6 +1031,9 @@
+ {
+ int i, result;
+
++ if (sdev->skip_vpd_pages)
++ goto fail;
++
+ /* Ask for all the pages supported by this device */
+ result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
+ if (result)
+commit 4d0ed18277cc6f07513ee0b04475f19cd69e75ef
+Author: Peter Hurley <peter@hurleysoftware.com>
+Date: Tue Dec 10 17:12:02 2013 -0500
+
+ n_tty: Fix buffer overruns with larger-than-4k pastes
+
+ readline() inadvertently triggers an error recovery path when
+ pastes larger than 4k overrun the line discipline buffer. The
+ error recovery path discards input when the line discipline buffer
+ is full and operating in canonical mode and no newline has been
+ received. Because readline() changes the termios to non-canonical
+ mode to read the line char-by-char, the line discipline buffer
+ can become full, and then when readline() restores termios back
+ to canonical mode for the caller, the now-full line discipline
+ buffer triggers the error recovery.
+
+ When changing termios from non-canon to canon mode and the read
+ buffer contains data, simulate an EOF push _without_ the
+ DISABLED_CHAR in the read buffer.
- This bit is not changed by vendor driver, and should be left alone.
- The documentation implies this a debug bit.
- 0 = WAKE# only asserted when VMAIN not available
- 1 = WAKE# is depend on wake events and independent of VMAIN.
+ Importantly for the readline() problem, the termios can be
+ changed back to non-canonical mode without changes to the read
+ buffer occurring; ie., as if the previous termios change had not
+ happened (as long as no intervening read took place).
- Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
+ Preserve existing userspace behavior which allows '\0's already
+ received in non-canon mode to be read as '\0's in canon mode
+ (rather than trigger add'l EOF pushes or an actual EOF).
+
+ Patch based on original proposal and discussion here
+ https://bugzilla.kernel.org/show_bug.cgi?id=55991
+ by Stas Sergeev <stsp@users.sourceforge.net>
+
+ Reported-by: Margarita Manterola <margamanterola@gmail.com>
+ Cc: Maximiliano Curia <maxy@gnuservers.com.ar>
+ Cc: Pavel Machek <pavel@ucw.cz>
+ Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
+ Acked-by: Stas Sergeev <stsp@users.sourceforge.net>
+ Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-diff --git b/drivers/net/sky2.c a/drivers/net/sky2.c
-index 2494842..edf37aa 100644
---- b/drivers/net/sky2.c
-+++ a/drivers/net/sky2.c
-@@ -733,6 +733,7 @@ static void sky2_wol_init(struct sky2_port *sky2)
- unsigned port = sky2->port;
- enum flow_control save_mode;
- u16 ctrl;
-+ u32 reg1;
+diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
+index fdc2ecd..961e6a9 100644
+--- a/drivers/tty/n_tty.c
++++ b/drivers/tty/n_tty.c
+@@ -104,6 +104,7 @@ struct n_tty_data {
- /* Bring hardware out of reset */
- sky2_write16(hw, B0_CTST, CS_RST_CLR);
-@@ -786,6 +787,11 @@ static void sky2_wol_init(struct sky2_port *sky2)
- /* Disable PiG firmware */
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
+ /* must hold exclusive termios_rwsem to reset these */
+ unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
++ unsigned char push:1;
-+ /* Turn on legacy PCI-Express PME mode */
-+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-+ reg1 |= PCI_Y2_PME_LEGACY;
-+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-+
- /* block receiver */
- sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+ /* shared by producer and consumer */
+ char read_buf[N_TTY_BUF_SIZE];
+@@ -341,6 +342,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
+
+ ldata->erasing = 0;
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
++ ldata->push = 0;
}
-
-Commit 368e136 ("xfs: remove duplicate code from dquot reclaim") fails
-to unlock the dquot freelist when the number of loop restarts is
-exceeded in xfs_qm_dqreclaim_one(). This causes hangs in memory
-reclaim. Remove the bogus loop exit check that causes the problem.
-
-Reported-by: Malcolm Scott <lkml@malc.org.uk>
-Signed-off-by: Dave Chinner <dchinner@redhat.com>
----
- fs/xfs/quota/xfs_qm.c | 2 --
- 1 files changed, 0 insertions(+), 2 deletions(-)
-
-diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
-index f8e854b..9431c56 100644
---- a/fs/xfs/quota/xfs_qm.c
-+++ b/fs/xfs/quota/xfs_qm.c
-@@ -1992,8 +1992,6 @@ dqfunlock:
- xfs_dqunlock(dqp);
- if (dqpout)
- break;
-- if (restarts >= XFS_QM_RECLAIM_MAX_RESTARTS)
-- return NULL;
+
+ static void n_tty_packet_mode_flush(struct tty_struct *tty)
+@@ -1745,7 +1747,16 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
+
+ if (!old || (old->c_lflag ^ tty->termios.c_lflag) & ICANON) {
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
+- ldata->line_start = ldata->canon_head = ldata->read_tail;
++ ldata->line_start = ldata->read_tail;
++ if (!L_ICANON(tty) || !read_cnt(ldata)) {
++ ldata->canon_head = ldata->read_tail;
++ ldata->push = 0;
++ } else {
++ set_bit((ldata->read_head - 1) & (N_TTY_BUF_SIZE - 1),
++ ldata->read_flags);
++ ldata->canon_head = ldata->read_head;
++ ldata->push = 1;
++ }
+ ldata->erasing = 0;
+ ldata->lnext = 0;
+ }
+@@ -1951,6 +1962,12 @@ static int copy_from_read_buf(struct tty_struct *tty,
+ * it copies one line of input up to and including the line-delimiting
+ * character into the user-space buffer.
+ *
++ * NB: When termios is changed from non-canonical to canonical mode and
++ * the read buffer contains data, n_tty_set_termios() simulates an EOF
++ * push (as if C-d were input) _without_ the DISABLED_CHAR in the buffer.
++ * This causes data already processed as input to be immediately available
++ * as input although a newline has not been received.
++ *
+ * Called under the atomic_read_lock mutex
+ *
+ * n_tty_read()/consumer path:
+@@ -1997,7 +2014,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
+ n += found;
+ c = n;
+
+- if (found && read_buf(ldata, eol) == __DISABLED_CHAR) {
++ if (found && !ldata->push && read_buf(ldata, eol) == __DISABLED_CHAR) {
+ n--;
+ eof_push = !n && ldata->read_tail != ldata->line_start;
+ }
+@@ -2024,7 +2041,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
+ ldata->read_tail += c;
+
+ if (found) {
+- ldata->line_start = ldata->read_tail;
++ if (!ldata->push)
++ ldata->line_start = ldata->read_tail;
++ else
++ ldata->push = 0;
+ tty_audit_push(tty);
}
- mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock);
- return dqpout;
+ return eof_push ? -EAGAIN : 0;
projects / packages / kernel.git / blobdiff