---- linux-2.6.32/drivers/infiniband/Kconfig~ 2009-12-05 00:26:03.663774916 +0100
-+++ linux-2.6.32/drivers/infiniband/Kconfig 2009-12-05 00:26:05.914179759 +0100
-@@ -37,7 +37,6 @@
- config INFINIBAND_ADDR_TRANS
- bool
- depends on INET
-- depends on !(INFINIBAND = y && IPV6 = m)
- default y
-
- source "drivers/infiniband/hw/mthca/Kconfig"
--- linux-2.6.33/scripts/mod/modpost.c~ 2010-02-24 19:52:17.000000000 +0100
+++ linux-2.6.33/scripts/mod/modpost.c 2010-03-07 14:26:47.242168558 +0100
@@ -15,7 +15,8 @@
/* Some toolchains use a `_' prefix for all user symbols. */
-commit 87b09f1f25cd1e01d7c50bf423c7fe33027d7511
-Author: stephen hemminger <shemminger@vyatta.com>
-Date: Fri Feb 12 06:58:00 2010 +0000
-
- sky2: dont enable PME legacy mode
-
- This bit is not changed by vendor driver, and should be left alone.
- The documentation implies this a debug bit.
- 0 = WAKE# only asserted when VMAIN not available
- 1 = WAKE# is depend on wake events and independent of VMAIN.
-
- Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-diff --git b/drivers/net/sky2.c a/drivers/net/sky2.c
-index 2494842..edf37aa 100644
---- b/drivers/net/sky2.c
-+++ a/drivers/net/sky2.c
-@@ -733,6 +733,7 @@ static void sky2_wol_init(struct sky2_port *sky2)
- unsigned port = sky2->port;
- enum flow_control save_mode;
- u16 ctrl;
-+ u32 reg1;
-
- /* Bring hardware out of reset */
- sky2_write16(hw, B0_CTST, CS_RST_CLR);
-@@ -786,6 +787,11 @@ static void sky2_wol_init(struct sky2_port *sky2)
- /* Disable PiG firmware */
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
-
-+ /* Turn on legacy PCI-Express PME mode */
-+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-+ reg1 |= PCI_Y2_PME_LEGACY;
-+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-+
- /* block receiver */
- sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- }
-Date: Mon, 11 Jul 2011 09:59:57 -0400
-From: Christoph Hellwig <hch@infradead.org>
-To: xfs@oss.sgi.com
-Cc: arekm@maven.pl
-Subject: [PATCH] xfs: start periodic workers later
-Message-ID: <20110711135957.GA23737@infradead.org>
-MIME-Version: 1.0
-Content-Type: text/plain;
- charset=us-ascii
-Content-Disposition: inline
-User-Agent: Mutt/1.5.21 (2010-09-15)
-
-Start the periodic sync workers only after we have finished xfs_mountfs
-and thus fully set up the filesystem structures. Without this we can
-call into xfs_qm_sync before the quotainfo strucute is set up if the
-mount takes unusually long, and probably hit other incomplete states
-as well.
-
-Also clean up the xfs_fs_fill_super error path by using consistent
-label names, and removing an impossible to reach case.
-
-Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
-Signed-off-by: Christoph Hellwig <hch@lst.de>
-
-Index: xfs/fs/xfs/linux-2.6/xfs_super.c
-===================================================================
---- xfs.orig/fs/xfs/linux-2.6/xfs_super.c 2011-07-11 12:02:56.762758869 +0200
-+++ xfs/fs/xfs/linux-2.6/xfs_super.c 2011-07-11 12:09:20.817344934 +0200
-@@ -1411,37 +1411,35 @@ xfs_fs_fill_super(
- sb->s_time_gran = 1;
- set_posix_acl_flag(sb);
-
-- error = xfs_syncd_init(mp);
-- if (error)
-- goto out_filestream_unmount;
--
- xfs_inode_shrinker_register(mp);
-
- error = xfs_mountfs(mp);
- if (error)
-- goto out_syncd_stop;
-+ goto out_filestream_unmount;
-+
-+ error = xfs_syncd_init(mp);
-+ if (error)
-+ goto out_unmount;
-
- root = igrab(VFS_I(mp->m_rootip));
- if (!root) {
- error = ENOENT;
-- goto fail_unmount;
-+ goto out_syncd_stop;
- }
- if (is_bad_inode(root)) {
- error = EINVAL;
-- goto fail_vnrele;
-+ goto out_syncd_stop;
- }
- sb->s_root = d_alloc_root(root);
- if (!sb->s_root) {
- error = ENOMEM;
-- goto fail_vnrele;
-+ goto out_iput;
- }
-
- return 0;
-
-- out_syncd_stop:
-- xfs_inode_shrinker_unregister(mp);
-- xfs_syncd_stop(mp);
- out_filestream_unmount:
-+ xfs_inode_shrinker_unregister(mp);
- xfs_filestream_unmount(mp);
- out_free_sb:
- xfs_freesb(mp);
-@@ -1455,17 +1453,12 @@ xfs_fs_fill_super(
- out:
- return -error;
-
-- fail_vnrele:
-- if (sb->s_root) {
-- dput(sb->s_root);
-- sb->s_root = NULL;
-- } else {
-- iput(root);
-- }
--
-- fail_unmount:
-- xfs_inode_shrinker_unregister(mp);
-+ out_iput:
-+ iput(root);
-+ out_syncd_stop:
- xfs_syncd_stop(mp);
-+ out_unmount:
-+ xfs_inode_shrinker_unregister(mp);
-
- /*
- * Blow away any referenced inode in the filestreams cache.
-On Sat, 2 Jul 2011, Andi Kleen wrote:
-
-> > The problem is that blk_peek_request() calls scsi_prep_fn(), which
-> > does this:
-> >
-> > struct scsi_device *sdev = q->queuedata;
-> > int ret = BLKPREP_KILL;
-> >
-> > if (req->cmd_type == REQ_TYPE_BLOCK_PC)
-> > ret = scsi_setup_blk_pc_cmnd(sdev, req);
-> > return scsi_prep_return(q, req, ret);
-> >
-> > It doesn't check to see if sdev is NULL, nor does
-> > scsi_setup_blk_pc_cmnd(). That accounts for this error:
->
-> I actually added a NULL check in scsi_setup_blk_pc_cmnd early on,
-> but that just caused RCU CPU stalls afterwards and then eventually
-> a hung system.
-
-The RCU problem is likely to be a separate issue. It might even be a
-result of the use-after-free problem with the elevator.
-
-At any rate, it's clear that the crash in the refcounting log you
-posted occurred because scsi_setup_blk_pc_cmnd() called
-scsi_prep_state_check(), which tried to dereference the NULL pointer.
-
-Would you like to try this patch to see if it fixes the problem? As I
-said before, I'm not certain it's the best thing to do, but it worked
-on my system.
-
-Alan Stern
-
-
-
-
-Index: usb-3.0/drivers/scsi/scsi_lib.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_lib.c
-+++ usb-3.0/drivers/scsi/scsi_lib.c
-@@ -1247,6 +1247,8 @@ int scsi_prep_fn(struct request_queue *q
- struct scsi_device *sdev = q->queuedata;
- int ret = BLKPREP_KILL;
-
-+ if (!sdev)
-+ return ret;
- if (req->cmd_type == REQ_TYPE_BLOCK_PC)
- ret = scsi_setup_blk_pc_cmnd(sdev, req);
- return scsi_prep_return(q, req, ret);
-Index: usb-3.0/drivers/scsi/scsi_sysfs.c
-===================================================================
---- usb-3.0.orig/drivers/scsi/scsi_sysfs.c
-+++ usb-3.0/drivers/scsi/scsi_sysfs.c
-@@ -322,6 +322,8 @@ static void scsi_device_dev_release_user
- kfree(evt);
- }
-
-+ /* Freeing the queue signals to block that we're done */
-+ scsi_free_queue(sdev->request_queue);
- blk_put_queue(sdev->request_queue);
- /* NULL queue means the device can't be used */
- sdev->request_queue = NULL;
-@@ -936,8 +938,6 @@ void __scsi_remove_device(struct scsi_de
- /* cause the request function to reject all I/O requests */
- sdev->request_queue->queuedata = NULL;
-
-- /* Freeing the queue signals to block that we're done */
-- scsi_free_queue(sdev->request_queue);
- put_device(dev);
- }
-
-
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-Please read the FAQ at http://www.tux.org/lkml/
-commit 3326c784c9f492e988617d93f647ae0cfd4c8d09
-Author: Jiri Pirko <jpirko@redhat.com>
-Date: Wed Jul 20 04:54:38 2011 +0000
-
- forcedeth: do vlan cleanup
-
- - unify vlan and nonvlan rx path
- - kill np->vlangrp and nv_vlan_rx_register
- - allow to turn on/off rx vlan accel via ethtool (set_features)
-
- Signed-off-by: Jiri Pirko <jpirko@redhat.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
-index 537b695..e64cd9c 100644
---- a/drivers/net/forcedeth.c
-+++ b/drivers/net/forcedeth.c
-@@ -820,9 +820,6 @@ struct fe_priv {
- struct nv_skb_map *tx_end_flip;
- int tx_stop;
-
-- /* vlan fields */
-- struct vlan_group *vlangrp;
--
- /* msi/msi-x fields */
- u32 msi_flags;
- struct msix_entry msi_x_entry[NV_MSI_X_MAX_VECTORS];
-@@ -2766,17 +2763,13 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
- skb->protocol = eth_type_trans(skb, dev);
- prefetch(skb->data);
-
-- if (likely(!np->vlangrp)) {
-- napi_gro_receive(&np->napi, skb);
-- } else {
-- vlanflags = le32_to_cpu(np->get_rx.ex->buflow);
-- if (vlanflags & NV_RX3_VLAN_TAG_PRESENT) {
-- vlan_gro_receive(&np->napi, np->vlangrp,
-- vlanflags & NV_RX3_VLAN_TAG_MASK, skb);
-- } else {
-- napi_gro_receive(&np->napi, skb);
-- }
-+ vlanflags = le32_to_cpu(np->get_rx.ex->buflow);
-+ if (vlanflags & NV_RX3_VLAN_TAG_PRESENT) {
-+ u16 vid = vlanflags & NV_RX3_VLAN_TAG_MASK;
-+
-+ __vlan_hwaccel_put_tag(skb, vid);
- }
-+ napi_gro_receive(&np->napi, skb);
-
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += len;
-@@ -4484,6 +4477,27 @@ static u32 nv_fix_features(struct net_device *dev, u32 features)
- return features;
- }
-
-+static void nv_vlan_mode(struct net_device *dev, u32 features)
-+{
-+ struct fe_priv *np = get_nvpriv(dev);
-+
-+ spin_lock_irq(&np->lock);
-+
-+ if (features & NETIF_F_HW_VLAN_RX)
-+ np->txrxctl_bits |= NVREG_TXRXCTL_VLANSTRIP;
-+ else
-+ np->txrxctl_bits &= ~NVREG_TXRXCTL_VLANSTRIP;
-+
-+ if (features & NETIF_F_HW_VLAN_TX)
-+ np->txrxctl_bits |= NVREG_TXRXCTL_VLANINS;
-+ else
-+ np->txrxctl_bits &= ~NVREG_TXRXCTL_VLANINS;
-+
-+ writel(np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
-+
-+ spin_unlock_irq(&np->lock);
-+}
-+
- static int nv_set_features(struct net_device *dev, u32 features)
- {
- struct fe_priv *np = netdev_priv(dev);
-@@ -4504,6 +4518,9 @@ static int nv_set_features(struct net_device *dev, u32 features)
- spin_unlock_irq(&np->lock);
- }
-
-+ if (changed & (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX))
-+ nv_vlan_mode(dev, features);
-+
- return 0;
- }
-
-@@ -4879,29 +4896,6 @@ static const struct ethtool_ops ops = {
- .self_test = nv_self_test,
- };
-
--static void nv_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
--{
-- struct fe_priv *np = get_nvpriv(dev);
--
-- spin_lock_irq(&np->lock);
--
-- /* save vlan group */
-- np->vlangrp = grp;
--
-- if (grp) {
-- /* enable vlan on MAC */
-- np->txrxctl_bits |= NVREG_TXRXCTL_VLANSTRIP | NVREG_TXRXCTL_VLANINS;
-- } else {
-- /* disable vlan on MAC */
-- np->txrxctl_bits &= ~NVREG_TXRXCTL_VLANSTRIP;
-- np->txrxctl_bits &= ~NVREG_TXRXCTL_VLANINS;
-- }
--
-- writel(np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
--
-- spin_unlock_irq(&np->lock);
--}
--
- /* The mgmt unit and driver use a semaphore to access the phy during init */
- static int nv_mgmt_acquire_sema(struct net_device *dev)
- {
-@@ -5208,7 +5202,6 @@ static const struct net_device_ops nv_netdev_ops = {
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = nv_set_mac_address,
- .ndo_set_multicast_list = nv_set_multicast,
-- .ndo_vlan_rx_register = nv_vlan_rx_register,
- #ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = nv_poll_controller,
- #endif
-@@ -5226,7 +5219,6 @@ static const struct net_device_ops nv_netdev_ops_optimized = {
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = nv_set_mac_address,
- .ndo_set_multicast_list = nv_set_multicast,
-- .ndo_vlan_rx_register = nv_vlan_rx_register,
- #ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = nv_poll_controller,
- #endif
-commit 0891b0e08937aaec2c4734acb94c5ff8042313bb
-Author: Jiri Pirko <jpirko@redhat.com>
-Date: Tue Jul 26 10:19:28 2011 +0000
-
- forcedeth: fix vlans
-
- For some reason, when rxaccel is disabled, NV_RX3_VLAN_TAG_PRESENT is
- still set and some pseudorandom vids appear. So check for
- NETIF_F_HW_VLAN_RX as well. Also set correctly hw_features and set vlan
- mode on probe.
-
- Signed-off-by: Jiri Pirko <jpirko@redhat.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
-index e64cd9c..e55df30 100644
---- a/drivers/net/forcedeth.c
-+++ b/drivers/net/forcedeth.c
-@@ -2764,7 +2764,14 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
- prefetch(skb->data);
-
- vlanflags = le32_to_cpu(np->get_rx.ex->buflow);
-- if (vlanflags & NV_RX3_VLAN_TAG_PRESENT) {
-+
-+ /*
-+ * There's need to check for NETIF_F_HW_VLAN_RX here.
-+ * Even if vlan rx accel is disabled,
-+ * NV_RX3_VLAN_TAG_PRESENT is pseudo randomly set.
-+ */
-+ if (dev->features & NETIF_F_HW_VLAN_RX &&
-+ vlanflags & NV_RX3_VLAN_TAG_PRESENT) {
- u16 vid = vlanflags & NV_RX3_VLAN_TAG_MASK;
-
- __vlan_hwaccel_put_tag(skb, vid);
-@@ -5331,15 +5338,16 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
- np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
- dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_RXCSUM;
-- dev->features |= dev->hw_features;
- }
-
- np->vlanctl_bits = 0;
- if (id->driver_data & DEV_HAS_VLAN) {
- np->vlanctl_bits = NVREG_VLANCONTROL_ENABLE;
-- dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
-+ dev->hw_features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
- }
-
-+ dev->features |= dev->hw_features;
-+
- np->pause_flags = NV_PAUSEFRAME_RX_CAPABLE | NV_PAUSEFRAME_RX_REQ | NV_PAUSEFRAME_AUTONEG;
- if ((id->driver_data & DEV_HAS_PAUSEFRAME_TX_V1) ||
- (id->driver_data & DEV_HAS_PAUSEFRAME_TX_V2) ||
-@@ -5607,6 +5615,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
- goto out_error;
- }
-
-+ nv_vlan_mode(dev, dev->features);
-+
- netif_carrier_off(dev);
-
- dev_info(&pci_dev->dev, "ifname %s, PHY OUI 0x%x @ %d, addr %pM\n",
--- linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh~ 2011-07-22 04:17:23.000000000 +0200
+++ linux-3.0/scripts/kconfig/lxdialog/check-lxdialog.sh 2011-08-25 21:26:04.799150642 +0200
@@ -9,6 +9,12 @@
exit
fi
done
+
projects / packages / kernel.git / blobdiff