# TODO:
-# - freeware.key should be in this same directory as eagle binary
-# - add libraries from homepage
-# - enhance description
+# - If you have any idea how to PLDize this program, do it:)
+# - in first run eagle.key should be writable for user or use
+# sudo /usr/lib/eagle-light/bin/eagle to change license
+# - Is banner in rpm needed to introduce how to run it?
-%define _ver 4.13r1
Summary: Eagle Layout Editor
-Summary(pl): Edytor p³ytek drukowanych Eagle
+Summary(pl.UTF-8): Edytor płytek drukowanych Eagle
Name: eagle-light
-Version: 4.13r1
-Release: 0.1
+Version: 6.3.0
+Release: 1
License: Freeware
Group: X11/Applications/Science
-Source0: ftp://ftp.cadsoft.de/pub/program/%{_ver}/eagle-lin-eng-%{_ver}.tgz
-# Source0-md5: c9607298d0c7ca1545397f996d14c1e8
-Source1: %{name}.desktop
-URL: http://www.cadsoft.de/freeware.htm/
+Source0: ftp://ftp.cadsoft.de/eagle/program/latest/eagle-lin-%{version}.run
+# Source0-md5: 661defb4ae9531e829a96c9aaaa16b0e
+Source1: ftp://ftp.cadsoft.de/eagle/program/latest/elektro-tutorial.pdf
+# Source1-md5: 4454bfbf5b6137d3bfb47a4cefde0630
+Source2: %{name}.desktop
+URL: http://www.cadsoft.de/freeware.htm
ExclusiveArch: %{ix86}
BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
+%define _eagledir %{_libdir}/eagle-light
+# binutils have problems to strip bin/eagle so need disable striping
+%define no_install_post_strip 1
+
%description
Eagle Layout Editor. Limitations:
- The useable board area is limited to 100 x 80 mm (4 x 3.2 inches).
- Only two signal layers can be used (Top and Bottom).
- The schematic editor can only create one sheet.
+To run Eagle, you need licence key. Freeware Licence key is in:
+/usr/share/eagle-light/bin/
+
+%description -l pl.UTF-8
+Edytor płytek drukowanych Eagle. Ograniczenia:
+- Obszar płytki jest ograniczony do 100 x 80 mm (4 x 3.2 cale)
+- Tylko dwie sygnałowe warstwy mogą być używane (wierzchnia i spodnia)
+- Edytor schematów może stworzyć jeden arkusz
+Aby uruchomic Eagle, potrzebny jest klucz licencyjny. Klucz licencyjny
+Freeware znajduje się w katalogu:
+/usr/share/eagle-light/bin/
-%description -l pl
-Edytor p³ytek drukowanych Eagle Limity:
-- Obszar p³ytki jest ograniczony do 100 x 80 mm (4 x 3.2 cale)
-- Tylko dwa sygna³owe warstwy mog± byæ u¿ywane (wierzchnia i spodnia)
-- Edytor schematów mo¿e stworzyæ jeden arkusz
%prep
-%setup -q -n eagle-lin-eng-%{version}
+%setup -q -c -T
+
+sh %{SOURCE0} `pwd`
+mv -f eagle-%{version}/* .
+rm -rf eagle-%{version}
+
+cp -f %{SOURCE1} doc
%install
rm -rf $RPM_BUILD_ROOT
-install -d $RPM_BUILD_ROOT%{_datadir}/%{name}/{bin,cam,lbr,projects/examples/{hexapod,singlesided,tutorial},scr,ulp} \
+
+install -d $RPM_BUILD_ROOT%{_eagledir}/{bin,cam,dru,lbr,projects,scr,ulp} \
$RPM_BUILD_ROOT%{_mandir}/man1 \
- $RPM_BUILD_ROOT%{_bindir} \
$RPM_BUILD_ROOT%{_pixmapsdir} \
$RPM_BUILD_ROOT%{_desktopdir}
-mv man/eagle.1 $RPM_BUILD_ROOT%{_mandir}/man1
-mv bin/eagle $RPM_BUILD_ROOT%{_bindir}/eagle
-mv bin/eagle.xpm $RPM_BUILD_ROOT%{_pixmapsdir}
-install %{SOURCE1} $RPM_BUILD_ROOT%{_desktopdir}
-install bin/* $RPM_BUILD_ROOT%{_datadir}/%{name}/bin
-install cam/* $RPM_BUILD_ROOT%{_datadir}/%{name}/cam
-install lbr/* $RPM_BUILD_ROOT%{_datadir}/%{name}/lbr
-install projects/DESCRIPTION $RPM_BUILD_ROOT%{_datadir}/%{name}/projects
-install projects/examples/hexapod/* $RPM_BUILD_ROOT%{_datadir}/%{name}/projects/examples/hexapod
-install projects/examples/singlesided/* $RPM_BUILD_ROOT%{_datadir}/%{name}/projects/examples/singlesided
-install projects/examples/tutorial/* $RPM_BUILD_ROOT%{_datadir}/%{name}/projects/examples/tutorial
-install scr/* $RPM_BUILD_ROOT%{_datadir}/%{name}/scr
-install ulp/* $RPM_BUILD_ROOT%{_datadir}/%{name}/ulp
+
+cp -af doc/eagle.1 $RPM_BUILD_ROOT%{_mandir}/man1
+cp -af bin/eagle $RPM_BUILD_ROOT%{_eagledir}/bin
+cp -af bin/eagleicon50.png $RPM_BUILD_ROOT%{_pixmapsdir}/eagle.png
+install %{SOURCE2} $RPM_BUILD_ROOT%{_desktopdir}
+# some doc files must be in bin dir because eagle use them internally
+cp -af bin/{eagle.def,freeware.key,*.png,*.qm,*.htm} $RPM_BUILD_ROOT%{_eagledir}/bin
+touch $RPM_BUILD_ROOT%{_eagledir}/bin/eagle.key
+cp -arf cam/* $RPM_BUILD_ROOT%{_eagledir}/cam
+cp -arf dru/* $RPM_BUILD_ROOT%{_eagledir}/dru
+cp -arf lbr/* $RPM_BUILD_ROOT%{_eagledir}/lbr
+cp -arf projects/* $RPM_BUILD_ROOT%{_eagledir}/projects
+cp -arf scr/* $RPM_BUILD_ROOT%{_eagledir}/scr
+cp -arf ulp/* $RPM_BUILD_ROOT%{_eagledir}/ulp
%clean
rm -rf $RPM_BUILD_ROOT
-%post
-umask 022
-if ! grep -qs '^%{_libdir}/%{name}$' /etc/ld.so.conf ; then
- echo "%{_libdir}/%{name}" >> /etc/ld.so.conf
-fi
-/sbin/ldconfig
-
-%postun
-umask 022
-if [ "$1" = '0' ]; then
- grep -v '^%{_libdir}/%{name}$' /etc/ld.so.conf > /etc/ld.so.conf.new 2>/dev/null
- mv -f /etc/ld.so.conf.new /etc/ld.so.conf
-fi
-/sbin/ldconfig
-
%files
%defattr(644,root,root,755)
-%doc doc/UPDATE doc/library.txt README
-%attr(755,root,root) %{_bindir}/*
-%{_datadir}/
+%doc doc/UPDATE_* doc/README_* doc/library_*.txt doc/*.pdf
+%{_mandir}/*
+%{_pixmapsdir}/*.png
+%{_desktopdir}/*.desktop
+%dir %{_eagledir}
+%dir %{_eagledir}/bin
+%attr(755,root,root) %{_eagledir}/bin/eagle
+# I'm not sure that eagle.key should have 665 atributtes
+#%attr(665,root,users)
+%{_eagledir}/bin/eagle.key
+%{_eagledir}/bin/freeware.key
+%{_eagledir}/bin/eagle.def
+%{_eagledir}/bin/*.png
+%{_eagledir}/bin/*.htm
+%lang(de) %{_eagledir}/bin/*_de.qm
+# - all files should be in folders ../ to eagle binary. Stupid :/
+%{_eagledir}/cam
+%{_eagledir}/dru
+%{_eagledir}/lbr
+%{_eagledir}/projects
+%{_eagledir}/scr
+%{_eagledir}/ulp
projects / packages / eagle-light.git / blobdiff