-Summary: drbd
-Summary(pl): drbd-
-Name: drbd
-Version: 0.5.8
-Release: 0
-Copyright: GPL
-URL: http://complang.tuwien.ac.at/reisner/drbd/
-Group: Utilities
-Group(pl): Narzêdzia
-Source: %{name}-%{version}.tar.gz
-BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
-
-%define _kernelversion 2.2.19
+#
+# Conditional build:
+%bcond_without dist_kernel # allow non-distribution kernel
+%bcond_without kernel # don't build kernel modules
+%bcond_without smp # don't build SMP module
+%bcond_without userspace # don't build userspace module
+%bcond_with verbose # verbose build (V=1)
+#
+Summary: drbd is a block device designed to build high availibility clusters
+Summary(pl): drbd jest urz±dzeniem blokowym dla klastrów o wysokiej niezawodno¶ci
+Name: drbd
+Version: 0.7.12
+%define rel 1
+Release: %{rel}
+License: GPL
+Group: Base/Kernel
+Source0: http://oss.linbit.com/drbd/0.7/%{name}-%{version}.tar.gz
+# Source0-md5: 5f24871be9ff319f9a86ca8a609d0657
+URL: http://www.drbd.org/
+BuildRequires: bison
+BuildRequires: flex
+%{?with_dist_kernel:BuildRequires: kernel-module-build}
+BuildRequires: rpmbuild(macros) >= 1.118
+BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
%description
-heartbeat is a basic heartbeat subsystem for Linux-HA.
-It will run scripts at initialization, and when machines go up or down.
-This version will also perform IP address takeover using gratuitous ARPs.
-It works correctly for a 2-node configuration, and is extensible to larger
-configurations.
-
-
-It implements the following kinds of heartbeats:
- - Bidirectional Serial Rings ("raw" serial ports)
- - UDP/IP broadcast (ethernet, etc)
- - Bidirectional Serial PPP/UDP Rings (using PPP)
- - "ping" heartbeats (for routers, switches, etc.)
- (to be used for breaking ties in 2-node systems)
-%description(pl)
-heartbeat jest podstawowym podsystemem dla systemów o podwy¿szonej dostêpno¶ci budowanych w oparciu o Linuxa. Zajmuje siê uruchamianiem skryptów podczas startu i zamykania systemu. Ta wersja pakietu pozwala na przejmowanie adresów IP. Oprogramowanie dzia³a poprawnie dla konfiguracji sk³adaj±cej siê z 2 hostów, mo¿na je równie¿ stosowaæ do bardziej skomplikowanych konfiguracji.
+drbd is a block device which is designed to build high availability
+clusters. This is done by mirroring a whole block device via (a
+dedicated) network. You could see it as a network RAID1.
+
+%description -l pl
+drbd jest urz±dzeniem blokowym zaprojektowanym dla klastrów o wysokiej
+niezawodno¶ci. drbd dzia³a jako mirroring ca³ego urz±dzenia blokowego
+przez (dedykowan±) sieæ. Mo¿e byæ widoczny jako sieciowy RAID1.
+
+%description -l pt_BR
+O DRBD é um dispositivo de bloco que é projetado para construir
+clusters de Alta Disponibilidade. Isto é feito espelhando um
+dispositivo de bloco inteiro via rede (dedicada ou não). Pode ser
+visto como um RAID 1 via rede. Este pacote contém utilitários para
+gerenciar dispositivos DRBD.
+
+%package -n drbdsetup
+Summary: Setup tool and scripts for DRBD
+Summary(pl): Narzêdzie konfiguracyjne i skrypty dla DRBD
+Summary(pt_BR): Utilitários para gerenciar dispositivos DRBD
+Group: Applications/System
+PreReq: rc-scripts
+Requires(post,preun): /sbin/chkconfig
+
+%description -n drbdsetup
+Setup tool and init scripts for DRBD.
+
+%description -n drbdsetup -l pl
+Narzêdzie konfiguracyjne i skrypty startowe dla DRBD.
+
+%package -n kernel-block-drbd
+Summary: Kernel module with drbd - a block device designed to build high availibility clusters
+Summary(pl): Modu³ j±dra do drbd - urz±dzenia blokowego dla klastrów o wysokiej niezawodno¶ci
+Release: %{rel}@%{_kernel_ver_str}
+Group: Base/Kernel
+%{?with_dist_kernel:%requires_releq_kernel_up}
+Requires(post,postun): /sbin/depmod
+Requires: drbdsetup
+
+%description -n kernel-block-drbd
+drbd is a block device which is designed to build high availability
+clusters. This is done by mirroring a whole block device via (a
+dedicated) network. You could see it as a network RAID1.
+
+%description -n kernel-block-drbd -l pl
+drbd jest urz±dzeniem blokowym zaprojektowanym dla klastrów o wysokiej
+niezawodno¶ci. drbd dzia³a jako mirroring ca³ego urz±dzenia blokowego
+przez (dedykowan±) sieæ. Mo¿e byæ widoczny jako sieciowy RAID1.
+
+%package -n kernel-smp-block-drbd
+Summary: SMP kernel module with drbd - a block device designed to build high availibility clusters
+Summary(pl): Wersja SMP Modu³u j±dra do drbd - urz±dzenia blokowego dla klastrów o wysokiej niezawodno¶ci
+Release: %{rel}@%{_kernel_ver_str}
+Group: Base/Kernel
+%{?with_dist_kernel:%requires_releq_kernel_smp}
+Requires(post,postun): /sbin/depmod
+Requires: drbdsetup
+
+%description -n kernel-smp-block-drbd
+drbd is a block device which is designed to build high availability
+clusters. This is done by mirroring a whole block device via (a
+dedicated) network. You could see it as a network RAID1.
+
+%description -n kernel-smp-block-drbd -l pl
+drbd jest urz±dzeniem blokowym zaprojektowanym dla klastrów o wysokiej
+niezawodno¶ci. drbd dzia³a jako mirroring ca³ego urz±dzenia blokowego
+przez (dedykowan±) sieæ. Mo¿e byæ widoczny jako sieciowy RAID1.
%prep
-%setup -q -n %{name}
+%setup -q
+
%build
-#
-%{__make}
-###########################################################
+%if %{with userspace}
+%{__make} tools \
+ CC="%{__cc}"
+%endif
+
+%if %{with kernel}
+cd drbd
+sed -i -e 's#$(CONFIG_BLK_DEV_DRBD)#m#g' Makefile-2.6
+ln -sf Makefile-2.6 Makefile
+# kernel module(s)
+for cfg in %{?with_dist_kernel:%{?with_smp:smp} up}%{!?with_dist_kernel:nondist}; do
+ if [ ! -r "%{_kernelsrcdir}/config-$cfg" ]; then
+ exit 1
+ fi
+ rm -rf include
+ install -d include/{linux,config}
+ ln -sf %{_kernelsrcdir}/config-$cfg .config
+ ln -sf %{_kernelsrcdir}/include/linux/autoconf-$cfg.h include/linux/autoconf.h
+ ln -sf %{_kernelsrcdir}/include/asm-%{_target_base_arch} include/asm
+ ln -sf %{_kernelsrcdir}/Module.symvers-$cfg Module.symvers
+ touch include/config/MARKER
+ %{__make} -C %{_kernelsrcdir} clean \
+ RCS_FIND_IGNORE="-name '*.ko' -o" \
+ M=$PWD O=$PWD \
+ %{?with_verbose:V=1}
+ %{__make} -C %{_kernelsrcdir} modules \
+ CC="%{__cc}" CPP="%{__cpp}" \
+ M=$PWD O=$PWD \
+ %{?with_verbose:V=1}
+ mv drbd{,-$cfg}.ko
+done
+%endif
+
%install
-###########################################################
-install -d $RPM_BUILD_ROOT/usr/sbin
-#%{__make} install PREFIX=$RPM_BUILD_ROOT/
-#dir drbd
-install -d $RPM_BUILD_ROOT/lib/modules/%{_kernelversion}/block/
-install drbd/drbd.o $RPM_BUILD_ROOT/lib/modules/%{_kernelversion}/block/
-#dir user
-install user/drbdsetup $RPM_BUILD_ROOT/usr/sbin/
-#dir documentation
-install -d $RPM_BUILD_ROOT/%{_defaultdocdir}/%{name}
-cd documentation
-install drbd.conf.5 drbd.conf.sgml drbdsetup.8 drbdsetup.sgml manpage.links manpage.refs $RPM_BUILD_ROOT/%{_defaultdocdir}/%{name}
-###########################################################
-%files
-###########################################################
-/usr/sbin/drbdsetup
-/lib/modules/%{_kernelversion}/block/drbd.o
-#/usr/man/man8/*
-#/usr/man/man5/*
-%doc %{_defaultdocdir}/%{name}
-
-###########################################################
+rm -rf $RPM_BUILD_ROOT
+install -d $RPM_BUILD_ROOT{/sbin,%{_mandir}/man{5,8},%{_sysconfdir}} \
+ $RPM_BUILD_ROOT{/etc/rc.d/init.d,/etc/ha.d/resource.d}
+
+%if %{with kernel}
+install -d $RPM_BUILD_ROOT/lib/modules/%{_kernel_ver}{,smp}/misc
+install drbd/drbd-%{?with_dist_kernel:up}%{!?with_dist_kernel:nondist}.ko \
+ $RPM_BUILD_ROOT/lib/modules/%{_kernel_ver}/misc/drbd.ko
+%if %{with smp} && %{with dist_kernel}
+install drbd/drbd-smp.ko \
+ $RPM_BUILD_ROOT/lib/modules/%{_kernel_ver}smp/misc/drbd.ko
+%endif
+%endif
+
+%if %{with userspace}
+install user/{drbdadm,drbdsetup} $RPM_BUILD_ROOT/sbin
+install scripts/drbd.conf $RPM_BUILD_ROOT%{_sysconfdir}
+install scripts/drbd $RPM_BUILD_ROOT/etc/rc.d/init.d
+
+ln -sf /etc/rc.d/init.d/drbd $RPM_BUILD_ROOT/etc/ha.d/resource.d/datadisk
+
+install documentation/*.5 $RPM_BUILD_ROOT%{_mandir}/man5
+install documentation/*.8 $RPM_BUILD_ROOT%{_mandir}/man8
+%endif
+
%clean
-###########################################################
rm -rf $RPM_BUILD_ROOT
-###########################################################
-%pre
-###########################################################
-#
-###########################################################
-#
-###########################################################
-%post
-/sbin/depmod
-###########################################################
+%post -n kernel-block-drbd
+%depmod %{_kernel_ver}
+
+%postun -n kernel-block-drbd
+%depmod %{_kernel_ver}
+
+%post -n kernel-smp-block-drbd
+%depmod %{_kernel_ver}smp
+
+%postun -n kernel-smp-block-drbd
+%depmod %{_kernel_ver}smp
+
+%post -n drbdsetup
+/sbin/chkconfig --add drbd
+if [ -f /var/lock/subsys/drbd ]; then
+ /etc/rc.d/init.d/drbd restart >&2
+else
+ echo "Run \"/etc/rc.d/init.d/drbd start\" to start drbd service." >&2
+fi
+
+%preun -n drbdsetup
+if [ "$1" = "0" ]; then
+ if [ -f /var/lock/subsys/drbd ]; then
+ /etc/rc.d/init.d/drbd stop
+ fi
+ /sbin/chkconfig --del drbd
+fi
+
+%if %{with userspace}
+%files -n drbdsetup
+%defattr(644,root,root,755)
+%doc documentation/*.txt
+%attr(755,root,root) /sbin/*
+%attr(754,root,root) /etc/rc.d/init.d/drbd
+%attr(755,root,root) %{_sysconfdir}/ha.d/resource.d/datadisk
+%config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/drbd.conf
+%{_mandir}/man[58]/*
+%endif
+%if %{with kernel}
+%files -n kernel-block-drbd
+%defattr(644,root,root,755)
+%doc ChangeLog README
+/lib/modules/%{_kernel_ver}/misc/*
-###########################################################
-%preun
-###########################################################
+%if %{with smp} && %{with dist_kernel}
+%files -n kernel-smp-block-drbd
+%defattr(644,root,root,755)
+%doc ChangeLog README
+/lib/modules/%{_kernel_ver}smp/misc/*
+%endif
+%endif
projects / packages / drbd.git / blobdiff