-diff -urN cdrtools-1.10.org/cdrecord/cdrecord.1 cdrtools-1.10/cdrecord/cdrecord.1
---- cdrtools-1.10.org/cdrecord/cdrecord.1 Sat Apr 21 12:30:35 2001
-+++ cdrtools-1.10/cdrecord/cdrecord.1 Sat Apr 21 12:45:37 2001
-@@ -134,7 +134,7 @@
+diff -ruN cdrtools-2.0-/README.ATAPI cdrtools-2.0/README.ATAPI
+--- cdrtools-2.0-/README.ATAPI Tue Dec 24 17:37:35 2002
++++ cdrtools-2.0/README.ATAPI Thu Dec 26 18:25:53 2002
+@@ -462,14 +462,14 @@
+ ln -s scd1 cdrw # NOTE: see above, maybe cdrom
+ Check the new SCSI settings:
+ cdrecord -scanbus
+- Setup cdrecord's environment - edit /etc/default/cdrecord:
++ Setup cdrecord's environment - edit /etc/cdrecord.conf:
+ CDR_DEVICE=cdrw
+ cdrw=1,0,0 4 8m
+ cdrom=1,2,0 0 0m
+ Input the right values, the fields are described in the manpage
+ of cdrecord. Alternatively, you may use this values as
+ cdrecord-parameter or take a frontend with an own configuration
+- scheme, then you don't need to modify /etc/default/cdrecord.
++ scheme, then you don't need to modify /etc/cdrecord.conf
+ 9. It's done! Insert a CD and try "cdrecord -v -toc"
+ /*--------------------------------------------------------------------------*/
+ He had constant buffer underrun problems:
+diff -ruN cdrtools-2.0-/README.linux cdrtools-2.0/README.linux
+--- cdrtools-2.0-/README.linux Sun Apr 1 12:08:41 2001
++++ cdrtools-2.0/README.linux Thu Dec 26 18:25:53 2002
+@@ -169,7 +169,7 @@
+ If dev=0,0,0 does not work but -dev=0,0,0 works you found this
+ incompatibility. This problem is caused by an incompatibility
+ in ctype.h and it seems that there are other compatibility problems
+- e.g. with reading /etc/default/cdrecord.
++ e.g. with reading /etc/cdrecord.conf
+
+ You cannot copy binaries between different Linux versions,
+ always compile the sources by yourself.
+diff -ruN cdrtools-2.0-/README.openserver cdrtools-2.0/README.openserver
+--- cdrtools-2.0-/README.openserver Tue Jan 25 17:37:48 2000
++++ cdrtools-2.0/README.openserver Thu Dec 26 18:25:53 2002
+@@ -55,7 +55,7 @@
+ ===================================================================
+ THE OLD ADDRESSING IS NO LONGER AVAILABLE!
+
+- PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
++ PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
+ ===================================================================
+
+ Running cdrecord with the old address method will result in an error!
+diff -ruN cdrtools-2.0-/README.unixware cdrtools-2.0/README.unixware
+--- cdrtools-2.0-/README.unixware Sun Mar 4 00:41:43 2001
++++ cdrtools-2.0/README.unixware Thu Dec 26 18:25:53 2002
+@@ -64,7 +64,7 @@
+ ===================================================================
+ THE OLD ADDRESSING IS NO LONGER AVAILABLE!
+
+- PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
++ PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
+ ===================================================================
+
+ Running cdrecord with the old address method will result in an error!
+diff -ruN cdrtools-2.0-/cdrecord/cdrecord.1 cdrtools-2.0/cdrecord/cdrecord.1
+--- cdrtools-2.0-/cdrecord/cdrecord.1 Tue Dec 24 16:28:40 2002
++++ cdrtools-2.0/cdrecord/cdrecord.1 Thu Dec 26 18:25:53 2002
+@@ -146,7 +146,7 @@
described below.
.PP
.B dev=
option may also be a drive name label in said file (see FILES section).
-@@ -474,7 +474,7 @@
+@@ -621,7 +621,7 @@
.B dev=
option does not contain the characters ',', '/', '@' or ':',
it is interpreted as an label name that may be found in the file
-/etc/default/cdrecord (see FILES section).
+/etc/cdrecord.conf (see FILES section).
.TP
- .BI timeout= #
- Set the default SCSI command timeout value to
-@@ -997,7 +997,7 @@
+ .BI gracetime= #
+ Set the grace time before starting to write to
+@@ -1361,7 +1361,7 @@
.TP
- CDR_DEVICE
+ .B CDR_DEVICE
This may either hold a device identifier that is suitable to the open
-call of the SCSI transport library or a label in the file /etc/default/cdrecord.
-+call of the SCSI transport library or a label in the file /etc/cdrecord.conf.
++call of the SCSI transport library or a label in the file /etc/cdrecord.conf
.TP
- CDR_SPEED
+ .B CDR_SPEED
Sets the default speed value for writing (see also
-@@ -1011,8 +1011,8 @@
+@@ -1417,8 +1417,8 @@
.SH FILES
.TP
For example:
.SM CDR_FIFOSIZE=8m
or
-@@ -1021,7 +1021,7 @@
+@@ -1427,7 +1427,7 @@
.TP
CDR_DEVICE
This may either hold a device identifier that is suitable to the open
-call of the SCSI transport library or a label in the file /etc/default/cdrecord
-+call of the SCSI transport library or a label in the file /etc/cdrecord.conf
++call of the SCSI transport library or a label in the file /etc/cdrecord.conf
that allows to identify a specific drive on the system.
.TP
CDR_SPEED
-diff -urN cdrtools-1.10.org/cdrecord/cdrecord.dfl cdrtools-1.10/cdrecord/cdrecord.dfl
---- cdrtools-1.10.org/cdrecord/cdrecord.dfl Sat Apr 21 12:30:35 2001
-+++ cdrtools-1.10/cdrecord/cdrecord.dfl Sat Apr 21 12:45:37 2001
+diff -ruN cdrtools-2.0-/cdrecord/cdrecord.dfl cdrtools-2.0/cdrecord/cdrecord.dfl
+--- cdrtools-2.0-/cdrecord/cdrecord.dfl Sun Jul 7 23:56:21 2002
++++ cdrtools-2.0/cdrecord/cdrecord.dfl Thu Dec 26 18:25:53 2002
@@ -1,6 +1,6 @@
- #ident @(#)cdrecord.dfl 1.2 00/04/16 Copyr 1998 J. Schilling
+ #ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling
#
-# This file is /etc/default/cdrecord
+# This file is /etc/cdrecord.conf
# It contains defaults that are used if no command line option
# or environment is present.
#
-diff -urN cdrtools-1.10.org/cdrecord/defaults.c cdrtools-1.10/cdrecord/defaults.c
---- cdrtools-1.10.org/cdrecord/defaults.c Sat Apr 21 12:30:35 2001
-+++ cdrtools-1.10/cdrecord/defaults.c Sat Apr 21 12:45:37 2001
-@@ -33,6 +33,8 @@
- #include <schily.h>
- #include "cdrecord.h"
-
-+#define DEFAULT_CONFIG "/etc/cdrecord.conf"
-+
- EXPORT void cdr_defaults __PR((char **devp, int *speedp, long *fsp));
- LOCAL void cdr_xdefaults __PR((char **devp, int *speedp, long *fsp));
- LOCAL char * strsv __PR((char* s));
-@@ -50,7 +52,7 @@
- if (!dev) {
- *devp = getenv("CDR_DEVICE");
-
-- if (!*devp && defltopen("/etc/default/cdrecord") == 0) {
-+ if (!*devp && defltopen(DEFAULT_CONFIG) == 0) {
- dev = defltread("CDR_DEVICE=");
- if (dev != NULL)
- *devp = strsv(dev);
-@@ -63,7 +65,7 @@
- char *p = getenv("CDR_SPEED");
-
- if (!p) {
-- if (defltopen("/etc/default/cdrecord") == 0) {
-+ if (defltopen(DEFAULT_CONFIG) == 0) {
- p = defltread("CDR_SPEED=");
- }
- }
-@@ -80,7 +82,7 @@
- char *p = getenv("CDR_FIFOSIZE");
-
- if (!p) {
-- if (defltopen("/etc/default/cdrecord") == 0) {
-+ if (defltopen(DEFAULT_CONFIG) == 0) {
- p = defltread("CDR_FIFOSIZE=");
- }
- }
-@@ -111,7 +113,7 @@
- x++;
- }
- js_snprintf(dname, sizeof(dname), "%s=", p);
-- if (defltopen("/etc/default/cdrecord") != 0)
-+ if (defltopen(DEFAULT_CONFIG) != 0)
- return;
-
- p = defltread(dname);
-diff -urN cdrtools-1.10.org/doc/cdrecord.man cdrtools-1.10/doc/cdrecord.man
---- cdrtools-1.10.org/doc/cdrecord.man Sat Apr 21 12:30:34 2001
-+++ cdrtools-1.10/doc/cdrecord.man Sat Apr 21 12:46:19 2001
-@@ -71,7 +71,7 @@
-
-
-
-- If a file /etc/default/cdrecord exists, the parameter to the
-+ If a file /etc/cdrecord.conf exists, the parameter to the
- d\bd\bd\bde\be\be\bev\bv\bv\bv=\b=\b=\b= option may also be a drive name label in said file (see
- FILES section).
-
-@@ -386,7 +386,7 @@
- If the argument to the d\bd\bd\bde\be\be\bev\bv\bv\bv=\b=\b=\b= option does not contain the
- characters ',', '/', '@' or ':', it is interpreted as
- an label name that may be found in the file
-- /etc/default/cdrecord (see FILES section).
-+ /etc/cdrecord.conf (see FILES section).
-
-
-
-@@ -930,7 +930,7 @@
-
-
- suitable to the open call of the SCSI transport library
-- or a label in the file /etc/default/cdrecord.
-+ or a label in the file /etc/cdrecord.conf
-
- CDR_SPEED
- Sets the default speed value for writing (see also -\b-\b-\b-
-@@ -942,16 +942,16 @@
-
-
- F\bF\bF\bFI\bI\bI\bIL\bL\bL\bLE\bE\bE\bES\bS\bS\bS
-- /etc/default/cdrecord
-+ /etc/cdrecord.conf
- Default values can be set for the following options in
-- /etc/default/cdrecord. For example: CDR_FIFOSIZE=8m
-+ /etc/cdrecord.conf. For example: CDR_FIFOSIZE=8m
- or CDR_SPEED=2
-
- CDR_DEVICE
- This may either hold a device identifier that is
- suitable to the open call of the SCSI transport
- library or a label in the file
-- /etc/default/cdrecord that allows to identify a
-+ /etc/cdrecord.conf that allows to identify a
- specific drive on the system.
-
- CDR_SPEED
-diff -urN cdrtools-1.10.org/include/deflts.h cdrtools-1.10/include/deflts.h
---- cdrtools-1.10.org/include/deflts.h Sat Apr 21 12:30:35 2001
-+++ cdrtools-1.10/include/deflts.h Sat Apr 21 12:45:37 2001
-@@ -31,7 +31,7 @@
- extern "C" {
- #endif
-
--#define DEFLT "/etc/default"
-+#define DEFLT "/etc"
-
- /*
- * cmd's to defltcntl()
+@@ -14,7 +14,7 @@
+ # Note that newer cdrecord versions do not default
+ # to speed=1. For MMC compliant drives, the default
+ # is to write at maximum speed, so it in general does
+-# not make sense to set up a default speed in /etc/default/cdrecord
++# not make sense to set up a default speed in /etc/cdrecord.conf
+ #
+ #CDR_SPEED=40
+
+diff -ruN cdrtools-2.0-/cdrecord/defaults.c cdrtools-2.0/cdrecord/defaults.c
+--- cdrtools-2.0-/cdrecord/defaults.c Wed Aug 14 19:52:00 2002
++++ cdrtools-2.0/cdrecord/defaults.c Thu Dec 26 18:25:53 2002
+@@ -53,7 +53,7 @@
+ * don't contribute work and don't give support, they are causing extra
+ * work for me and this way slow down the cdrecord development.
+ */
+- return (defltopen("/etc/default/cdrecord"));
++ return (defltopen("/etc/cdrecord.conf"));
+ }
+
+ EXPORT void
+diff -ruN cdrtools-2.0-/doc/cdrecord.man cdrtools-2.0/doc/cdrecord.man
+--- cdrtools-2.0-/doc/cdrecord.man Tue Dec 24 16:54:52 2002
++++ cdrtools-2.0/doc/cdrecord.man Thu Dec 26 18:28:09 2002
+@@ -67,7 +67,7 @@
+ try the -\b-s\bsc\bca\ban\bnb\bbu\bus\bs option of c\bcd\bdr\bre\bec\bco\bor\brd\bd described below.
+
+
+- If a file /etc/default/cdrecord exists, the parameter to
++ If a file /etc/cdrecord.conf exists, the parameter to
+ the d\bde\bev\bv=\b= option may also be a drive name label in said
+ file (see FILES section).
+
+@@ -438,7 +438,7 @@
+ If the argument to the d\bde\bev\bv=\b= option does not contain
+ the characters ',', '/', '@' or ':', it is inter-
+ preted as an label name that may be found in the
+- file /etc/default/cdrecord (see FILES section).
++ file /etc/cdrecord.man (see FILES section).
+
+ g\bgr\bra\bac\bce\bet\bti\bim\bme\be=\b=_\b#
+ Set the grace time before starting to write to _\b#
+@@ -1057,7 +1057,7 @@
+ This may either hold a device identifier that is
+ suitable to the open call of the SCSI transport
+ library or a label in the file
+- /etc/default/cdrecord.
++ /etc/cdrecord.conf
+
+ C\bCD\bDR\bR_\b_S\bSP\bPE\bEE\bED\bD
+ Sets the default speed value for writing (see also
+@@ -1096,16 +1096,16 @@
+
+
+ F\bFI\bIL\bLE\bES\bS
+- /etc/default/cdrecord
++ /etc/cdrecord.conf
+ Default values can be set for the following options
+- in /etc/default/cdrecord. For example: CDR_FIFOS-
++ in /etc/cdrecord.conf For example: CDR_FIFOS-
+ IZE=8m or CDR_SPEED=2
+
+ CDR_DEVICE
+ This may either hold a device identifier
+ that is suitable to the open call of the
+ SCSI transport library or a label in the
+- file /etc/default/cdrecord that allows to
++ file /etc/cdrecord.conf that allows to
+ identify a specific drive on the system.
+
+ CDR_SPEED
+diff -ruN cdrtools-2.0-/doc/cdrecord.ps cdrtools-2.0/doc/cdrecord.ps
+--- cdrtools-2.0-/doc/cdrecord.ps Tue Dec 24 16:55:27 2002
++++ cdrtools-2.0/doc/cdrecord.ps Thu Dec 26 18:26:59 2002
+@@ -290,7 +290,7 @@
+ (,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2
+ (\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 525.6
+ Q(ecord)-.18 E F0(described belo)2.5 E -.65(w.)-.25 G .114
+-(If a \214le /etc/def)108 554.4 R .114(ault/cdrecord e)-.1 F .115
++(If a \214le /etc/cdr)108 554.4 R .114(ecord.conf e)-.1 F .115
+ (xists, the parameter to the)-.15 F F2(de)2.615 E(v=)-.15 E F0 .115
+ (option may also be a dri)2.615 F .415 -.15(ve n)-.25 H .115
+ (ame label in said).15 F(\214le \(see FILES section\).)108 566.4 Q(On)
+@@ -749,8 +749,8 @@
+ 556.8 R 1.047(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
+ (option does not contain the characters ',)3.547 F 1.047
+ (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
+-(preted as an label name that may be found in the \214le /etc/def)144
+-568.8 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(gracetime=)108
++(preted as an label name that may be found in the \214le /etc/cdr)144
++568.8 Q(ecord.conf \(see FILES section\).)-.1 E F2(gracetime=)108
+ 585.6 Q F1(#).48 E F0(Set the grace time before starting to write to)144
+ 597.6 Q F1(#)2.5 E F0 2.5(seconds. V)3.4 F(alues belo)-1.11 E 2.5(w2s)
+ -.25 G(econds are not allo)-2.5 E(wed.)-.25 E F2(timeout=)108 614.4 Q F1
+@@ -1430,8 +1430,8 @@
+ G(nstead.)-2.5 E/F3 10.95/Times-Bold@0 SF(ENVIR)72 309.6 Q(ONMENT)-.329
+ E F2(CDR_DEVICE)108 321.6 Q F0 1.628(This may either hold a de)144 333.6
+ R 1.628(vice identi\214er that is suitable to the open call of the SCSI\
+- transport)-.25 F(library or a label in the \214le /etc/def)144 345.6 Q
+-(ault/cdrecord.)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
++ transport)-.25 F(library or a label in the \214le /etc/cdr)144 345.6 Q
++(ecord.conf)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
+ Q(ault speed v)-.1 E(alue for writing \(see also)-.25 E F2(\255speed)2.5
+ E F0(option\).)2.5 E F2(CDR_FIFOSIZE)108 391.2 Q F0(Sets the def)144
+ 403.2 Q(ault size of the FIFO \(see also)-.1 E F2(fs=)2.5 E F0 2.5(#o)C
+@@ -1465,16 +1465,16 @@
+ (ote that the remote SCSI serv)-6.236 F(er)-.15 E .553(program name wil\
+ l be ignored if you log in using an account that has been created with \
+ a remote)144 585.6 R(SCSI serv)144 597.6 Q(er program as login shell.)
+--.15 E F3(FILES)72 626.4 Q F0(/etc/def)108 638.4 Q(ault/cdrecord)-.1 E
++-.15 E F3(FILES)72 626.4 Q F0(/etc/rec)108 638.4 Q(ecord.conf)-.1 E
+ (Def)144 650.4 Q 3.228(ault v)-.1 F 3.228
+-(alues can be set for the follo)-.25 F 3.227(wing options in /etc/def)
+--.25 F 5.727(ault/cdrecord. F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
++(alues can be set for the follo)-.25 F 3.227(wing options in /etc/rec)
++-.25 F 5.727(ecord.conf F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
+ 9/Times-Roman@0 SF(CDR_FIFOSIZE=8m)144 662.4 Q F0(or)2.25 E F4
+ (CDR_SPEED=2)2.5 E F0(CDR_DEVICE)144 679.2 Q .261
+ (This may either hold a de)180 691.2 R .262
+ (vice identi\214er that is suitable to the open call of the SCSI trans-)
+--.25 F 1.418(port library or a label in the \214le /etc/def)180 703.2 R
+-1.418(ault/cdrecord that allo)-.1 F 1.418(ws to identify a speci\214c)
++-.25 F 1.418(port library or a label in the \214le /etc/rec)180 703.2 R
++1.418(ecord.conf that allo)-.1 F 1.418(ws to identify a speci\214c)
+ -.25 F(dri)180 715.2 Q .3 -.15(ve o)-.25 H 2.5(nt).15 G(he system.)-2.5
+ E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065
+ (chilling V)-2.5 F(ersion 2.0)-1.11 E(12)201.225 E EP
+diff -ruN cdrtools-2.0-/doc/readcd.man cdrtools-2.0/doc/readcd.man
+--- cdrtools-2.0-/doc/readcd.man Tue Dec 24 16:56:07 2002
++++ cdrtools-2.0/doc/readcd.man Thu Dec 26 18:25:53 2002
+@@ -96,7 +96,7 @@
+ If the argument to the d\bde\bev\bv=\b= option does not contain
+ the characters ',', '/', '@' or ':', it is inter-
+ preted as an label name that may be found in the
+- file /etc/default/cdrecord (see FILES section).
++ file /etc/cdrecord.conf (see FILES section).
+
+ t\bti\bim\bme\beo\bou\but\bt=\b=_\b#
+ Set the default SCSI command timeout value to _\b#
+diff -ruN cdrtools-2.0-/doc/readcd.ps cdrtools-2.0/doc/readcd.ps
+--- cdrtools-2.0-/doc/readcd.ps Tue Dec 24 16:56:28 2002
++++ cdrtools-2.0/doc/readcd.ps Thu Dec 26 18:25:53 2002
+@@ -330,8 +330,8 @@
+ 120 R 1.046(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
+ (option does not contain the characters ',)3.547 F 1.047
+ (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
+-(preted as an label name that may be found in the \214le /etc/def)144
+-132 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
++(preted as an label name that may be found in the \214le /etc/cdr)144
++132 Q(ecord.conf \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
+ F1(#).48 E F0 .13(Set the def)144 160.8 R .13
+ (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F1(#)2.63 E F0
+ 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
+diff -ruN cdrtools-2.0-/doc/scgcheck.man cdrtools-2.0/doc/scgcheck.man
+--- cdrtools-2.0-/doc/scgcheck.man Tue Dec 24 16:56:55 2002
++++ cdrtools-2.0/doc/scgcheck.man Thu Dec 26 18:25:53 2002
+@@ -90,7 +90,7 @@
+ If the argument to the d\bde\bev\bv=\b= option does not contain
+ the characters ',', '/', '@' or ':', it is inter-
+ preted as an label name that may be found in the
+- file /etc/default/cdrecord (see FILES section).
++ file /etc/cdrecord.conf (see FILES section).
+
+ t\bti\bim\bme\beo\bou\but\bt=\b=_\b#
+ Set the default SCSI command timeout value to _\b#
+diff -ruN cdrtools-2.0-/doc/scgcheck.ps cdrtools-2.0/doc/scgcheck.ps
+--- cdrtools-2.0-/doc/scgcheck.ps Tue Dec 24 16:57:15 2002
++++ cdrtools-2.0/doc/scgcheck.ps Thu Dec 26 18:25:53 2002
+@@ -317,8 +317,8 @@
+ 1.047(gument to the)-.18 F/F1 10/Times-Bold@0 SF(de)3.547 E(v=)-.15 E F0
+ 1.047(option does not contain the characters ',)3.547 F 1.047
+ (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
+-(preted as an label name that may be found in the \214le /etc/def)144 96
+-Q(ault/cdrecord \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
++(preted as an label name that may be found in the \214le /etc/cdr)144 96
++Q(ecord.conf \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
+ 10/Times-Italic@0 SF(#).48 E F0 .13(Set the def)144 124.8 R .13
+ (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F2(#)2.63 E F0
+ 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
+diff -ruN cdrtools-2.0-/readcd/readcd.1 cdrtools-2.0/readcd/readcd.1
+--- cdrtools-2.0-/readcd/readcd.1 Tue Dec 24 16:28:41 2002
++++ cdrtools-2.0/readcd/readcd.1 Thu Dec 26 18:25:53 2002
+@@ -186,7 +186,7 @@
+ .B dev=
+ option does not contain the characters ',', '/', '@' or ':',
+ it is interpreted as an label name that may be found in the file
+-/etc/default/cdrecord (see FILES section).
++/etc/cdrecord.conf (see FILES section).
+ .TP
+ .BI timeout= #
+ Set the default SCSI command timeout value to
+diff -ruN cdrtools-2.0-/scgcheck/scgcheck.1 cdrtools-2.0/scgcheck/scgcheck.1
+--- cdrtools-2.0-/scgcheck/scgcheck.1 Tue Dec 24 16:32:01 2002
++++ cdrtools-2.0/scgcheck/scgcheck.1 Thu Dec 26 18:25:53 2002
+@@ -170,7 +170,7 @@
+ .B dev=
+ option does not contain the characters ',', '/', '@' or ':',
+ it is interpreted as an label name that may be found in the file
+-/etc/default/cdrecord (see FILES section).
++/etc/cdrecord.conf (see FILES section).
+ .TP
+ .BI timeout= #
+ Set the default SCSI command timeout value to