-diff -ruN cdrtools-2.0-/README.ATAPI cdrtools-2.0/README.ATAPI
---- cdrtools-2.0-/README.ATAPI Tue Dec 24 17:37:35 2002
-+++ cdrtools-2.0/README.ATAPI Thu Dec 26 18:25:53 2002
-@@ -462,14 +462,14 @@
- ln -s scd1 cdrw # NOTE: see above, maybe cdrom
- Check the new SCSI settings:
- cdrecord -scanbus
-- Setup cdrecord's environment - edit /etc/default/cdrecord:
-+ Setup cdrecord's environment - edit /etc/cdrecord.conf:
- CDR_DEVICE=cdrw
- cdrw=1,0,0 4 8m
- cdrom=1,2,0 0 0m
- Input the right values, the fields are described in the manpage
- of cdrecord. Alternatively, you may use this values as
- cdrecord-parameter or take a frontend with an own configuration
-- scheme, then you don't need to modify /etc/default/cdrecord.
-+ scheme, then you don't need to modify /etc/cdrecord.conf
- 9. It's done! Insert a CD and try "cdrecord -v -toc"
- /*--------------------------------------------------------------------------*/
- He had constant buffer underrun problems:
-diff -ruN cdrtools-2.0-/README.openserver cdrtools-2.0/README.openserver
---- cdrtools-2.0-/README.openserver Tue Jan 25 17:37:48 2000
-+++ cdrtools-2.0/README.openserver Thu Dec 26 18:25:53 2002
-@@ -55,7 +55,7 @@
- ===================================================================
- THE OLD ADDRESSING IS NO LONGER AVAILABLE!
-
-- PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
-+ PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
- ===================================================================
-
- Running cdrecord with the old address method will result in an error!
-diff -ruN cdrtools-2.0-/README.unixware cdrtools-2.0/README.unixware
---- cdrtools-2.0-/README.unixware Sun Mar 4 00:41:43 2001
-+++ cdrtools-2.0/README.unixware Thu Dec 26 18:25:53 2002
-@@ -64,7 +64,7 @@
- ===================================================================
- THE OLD ADDRESSING IS NO LONGER AVAILABLE!
-
-- PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
-+ PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
- ===================================================================
-
- Running cdrecord with the old address method will result in an error!
-diff -ruN cdrtools-2.0-/cdrecord/cdrecord.1 cdrtools-2.0/cdrecord/cdrecord.1
---- cdrtools-2.0-/cdrecord/cdrecord.1 Tue Dec 24 16:28:40 2002
-+++ cdrtools-2.0/cdrecord/cdrecord.1 Thu Dec 26 18:25:53 2002
-@@ -146,7 +146,7 @@
- described below.
-
- .PP
+--- cdrtools-3.00/cdrecord/cdrecord.1~ 2014-03-25 14:58:38.000000000 +0200
++++ cdrtools-3.00/cdrecord/cdrecord.1 2014-03-25 14:59:13.673238717 +0200
+@@ -71,7 +71,7 @@
+ explained below refers to
+ .IR scsibus / target / lun
+ of the CD/DVD/BluRay-recorder.
-If a file /etc/default/cdrecord exists, the parameter to the
+If a file /etc/cdrecord.conf exists, the parameter to the
.B dev=
option may also be a drive name label in said file (see FILES section).
-@@ -621,7 +621,7 @@
+@@ -1201,13 +1201,13 @@
+ option is present,
+ .B cdrecord
+ will try to get a drive specific speed value from the file
+-.B /etc/default/cdrecord
++.B /etc/cdrecord.conf
+ and if it cannot find one, it will try to get the speed value from the
+ .B CDR_SPEED
+ environment and later from the
+ .B CDR_SPEED=
+ entry in
+-.BR /etc/default/cdrecord .
++.BR /etc/cdrecord.conf .
+ If no speed value could be found, cdrecord uses a drive specific default speed.
+ The default for all new (MMC compliant) drives is to use the maximum supported by the drive.
+ If you use
+@@ -1505,7 +1505,7 @@
+ .B CDR_DEVICE
+ environment.
+ .sp
+-If a file /etc/default/cdrecord exists, and
++If a file /etc/cdrecord.conf exists, and
+ if the argument to the
.B dev=
- option does not contain the characters ',', '/', '@' or ':',
- it is interpreted as an label name that may be found in the file
+ option
+@@ -1514,7 +1514,7 @@
+ environment
+ does not contain the characters ',', '/', '@' or ':',
+ it is interpreted as a device label name that was defined in the file
-/etc/default/cdrecord (see FILES section).
+/etc/cdrecord.conf (see FILES section).
- .TP
- .BI gracetime= #
- Set the grace time before starting to write to
-@@ -1361,7 +1361,7 @@
+ .sp
+ .B \h'-2m'Autotarget Mode
+ .br
+@@ -2158,7 +2158,7 @@
.TP
.B CDR_DEVICE
This may either hold a device identifier that is suitable to the open
.TP
.B CDR_SPEED
Sets the default speed value for writing (see also
-@@ -1417,8 +1417,11 @@
+@@ -2226,8 +2226,11 @@
.SH FILES
.TP
--/etc/default/cdrecord
+-.B /etc/default/cdrecord
-Default values can be set for the following options in /etc/default/cdrecord.
-+/etc/cdrecord.conf
++.B /etc/cdrecord.conf
+Default values can be set for the following options in /etc/cdrecord.conf .
+Note that this path has been changed from standard location in cdrtools
+distribution (/etc/default/cdrecord) to be consistent with other packages
For example:
.SM CDR_FIFOSIZE=8m
or
-@@ -1427,7 +1430,7 @@
+@@ -2236,7 +2239,7 @@
.TP
- CDR_DEVICE
+ .B CDR_DEVICE
This may either hold a device identifier that is suitable to the open
-call of the SCSI transport library or a label in the file /etc/default/cdrecord
-+call of the SCSI transport library or a label in the file /etc/cdrecord.conf
++call of the SCSI transport library or a label in the file /etc/cdrecord.conf
that allows to identify a specific drive on the system.
.TP
- CDR_SPEED
-diff -ruN cdrtools-2.0-/cdrecord/cdrecord.dfl cdrtools-2.0/cdrecord/cdrecord.dfl
---- cdrtools-2.0-/cdrecord/cdrecord.dfl Sun Jul 7 23:56:21 2002
-+++ cdrtools-2.0/cdrecord/cdrecord.dfl Thu Dec 26 18:25:53 2002
+ .B CDR_SPEED
+--- cdrtools-2.01.01.orig/cdrecord/cdrecord.dfl 2008-12-30 14:29:50.000000000 +0100
++++ cdrtools-2.01.01/cdrecord/cdrecord.dfl 2010-02-08 14:15:04.000000000 +0100
@@ -1,6 +1,6 @@
- #ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling
+ #ident @(#)cdrecord.dfl 1.7 08/12/30 Copyr 1998 J. Schilling
#
-# This file is /etc/default/cdrecord
+# This file is /etc/cdrecord.conf
# It contains defaults that are used if no command line option
# or environment is present.
#
-@@ -14,7 +14,7 @@
+@@ -19,7 +19,7 @@
# Note that newer cdrecord versions do not default
# to speed=1. For MMC compliant drives, the default
# is to write at maximum speed, so it in general does
#
#CDR_SPEED=40
-diff -ruN cdrtools-2.0-/cdrecord/defaults.c cdrtools-2.0/cdrecord/defaults.c
---- cdrtools-2.0-/cdrecord/defaults.c Wed Aug 14 19:52:00 2002
-+++ cdrtools-2.0/cdrecord/defaults.c Thu Dec 26 18:25:53 2002
-@@ -53,7 +53,7 @@
+--- cdrtools-2.01.01.orig/libcdrdeflt/cdrdeflt.c 2009-07-10 23:57:18.000000000 +0200
++++ cdrtools-2.01.01/libcdrdeflt/cdrdeflt.c 2010-02-08 14:15:04.000000000 +0100
+@@ -49,7 +49,7 @@
* don't contribute work and don't give support, they are causing extra
* work for me and this way slow down the cdrecord development.
*/
}
EXPORT void
-diff -ruN cdrtools-2.0-/doc/cdrecord.man cdrtools-2.0/doc/cdrecord.man
---- cdrtools-2.0-/doc/cdrecord.man Tue Dec 24 16:54:52 2002
-+++ cdrtools-2.0/doc/cdrecord.man Thu Dec 26 18:28:09 2002
-@@ -67,7 +67,7 @@
- try the -\b-s\bsc\bca\ban\bnb\bbu\bus\bs option of c\bcd\bdr\bre\bec\bco\bor\brd\bd described below.
-
-
-- If a file /etc/default/cdrecord exists, the parameter to
-+ If a file /etc/cdrecord.conf exists, the parameter to
- the d\bde\bev\bv=\b= option may also be a drive name label in said
- file (see FILES section).
-
-@@ -438,7 +438,7 @@
- If the argument to the d\bde\bev\bv=\b= option does not contain
- the characters ',', '/', '@' or ':', it is inter-
- preted as an label name that may be found in the
-- file /etc/default/cdrecord (see FILES section).
-+ file /etc/cdrecord.man (see FILES section).
-
- g\bgr\bra\bac\bce\bet\bti\bim\bme\be=\b=_\b#
- Set the grace time before starting to write to _\b#
-@@ -1057,7 +1057,7 @@
- This may either hold a device identifier that is
- suitable to the open call of the SCSI transport
- library or a label in the file
-- /etc/default/cdrecord.
-+ /etc/cdrecord.conf
-
- C\bCD\bDR\bR_\b_S\bSP\bPE\bEE\bED\bD
- Sets the default speed value for writing (see also
-@@ -1096,16 +1096,16 @@
-
-
- F\bFI\bIL\bLE\bES\bS
-- /etc/default/cdrecord
-+ /etc/cdrecord.conf
- Default values can be set for the following options
-- in /etc/default/cdrecord. For example: CDR_FIFOS-
-+ in /etc/cdrecord.conf For example: CDR_FIFOS-
- IZE=8m or CDR_SPEED=2
-
- CDR_DEVICE
- This may either hold a device identifier
- that is suitable to the open call of the
- SCSI transport library or a label in the
-- file /etc/default/cdrecord that allows to
-+ file /etc/cdrecord.conf that allows to
- identify a specific drive on the system.
-
- CDR_SPEED
-diff -ruN cdrtools-2.0-/doc/cdrecord.ps cdrtools-2.0/doc/cdrecord.ps
---- cdrtools-2.0-/doc/cdrecord.ps Tue Dec 24 16:55:27 2002
-+++ cdrtools-2.0/doc/cdrecord.ps Thu Dec 26 18:26:59 2002
-@@ -290,7 +290,7 @@
- (,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2
- (\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 525.6
- Q(ecord)-.18 E F0(described belo)2.5 E -.65(w.)-.25 G .114
--(If a \214le /etc/def)108 554.4 R .114(ault/cdrecord e)-.1 F .115
-+(If a \214le /etc/cdr)108 554.4 R .114(ecord.conf e)-.1 F .115
- (xists, the parameter to the)-.15 F F2(de)2.615 E(v=)-.15 E F0 .115
- (option may also be a dri)2.615 F .415 -.15(ve n)-.25 H .115
- (ame label in said).15 F(\214le \(see FILES section\).)108 566.4 Q(On)
-@@ -749,8 +749,8 @@
- 556.8 R 1.047(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
- (option does not contain the characters ',)3.547 F 1.047
- (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
--(preted as an label name that may be found in the \214le /etc/def)144
--568.8 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(gracetime=)108
-+(preted as an label name that may be found in the \214le /etc/cdr)144
-+568.8 Q(ecord.conf \(see FILES section\).)-.1 E F2(gracetime=)108
- 585.6 Q F1(#).48 E F0(Set the grace time before starting to write to)144
- 597.6 Q F1(#)2.5 E F0 2.5(seconds. V)3.4 F(alues belo)-1.11 E 2.5(w2s)
- -.25 G(econds are not allo)-2.5 E(wed.)-.25 E F2(timeout=)108 614.4 Q F1
-@@ -1430,8 +1430,8 @@
- G(nstead.)-2.5 E/F3 10.95/Times-Bold@0 SF(ENVIR)72 309.6 Q(ONMENT)-.329
- E F2(CDR_DEVICE)108 321.6 Q F0 1.628(This may either hold a de)144 333.6
- R 1.628(vice identi\214er that is suitable to the open call of the SCSI\
-- transport)-.25 F(library or a label in the \214le /etc/def)144 345.6 Q
--(ault/cdrecord.)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
-+ transport)-.25 F(library or a label in the \214le /etc/cdr)144 345.6 Q
-+(ecord.conf)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
- Q(ault speed v)-.1 E(alue for writing \(see also)-.25 E F2(\255speed)2.5
- E F0(option\).)2.5 E F2(CDR_FIFOSIZE)108 391.2 Q F0(Sets the def)144
- 403.2 Q(ault size of the FIFO \(see also)-.1 E F2(fs=)2.5 E F0 2.5(#o)C
-@@ -1465,16 +1465,16 @@
- (ote that the remote SCSI serv)-6.236 F(er)-.15 E .553(program name wil\
- l be ignored if you log in using an account that has been created with \
- a remote)144 585.6 R(SCSI serv)144 597.6 Q(er program as login shell.)
---.15 E F3(FILES)72 626.4 Q F0(/etc/def)108 638.4 Q(ault/cdrecord)-.1 E
-+-.15 E F3(FILES)72 626.4 Q F0(/etc/rec)108 638.4 Q(ecord.conf)-.1 E
- (Def)144 650.4 Q 3.228(ault v)-.1 F 3.228
--(alues can be set for the follo)-.25 F 3.227(wing options in /etc/def)
---.25 F 5.727(ault/cdrecord. F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
-+(alues can be set for the follo)-.25 F 3.227(wing options in /etc/rec)
-+-.25 F 5.727(ecord.conf F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
- 9/Times-Roman@0 SF(CDR_FIFOSIZE=8m)144 662.4 Q F0(or)2.25 E F4
- (CDR_SPEED=2)2.5 E F0(CDR_DEVICE)144 679.2 Q .261
- (This may either hold a de)180 691.2 R .262
- (vice identi\214er that is suitable to the open call of the SCSI trans-)
---.25 F 1.418(port library or a label in the \214le /etc/def)180 703.2 R
--1.418(ault/cdrecord that allo)-.1 F 1.418(ws to identify a speci\214c)
-+-.25 F 1.418(port library or a label in the \214le /etc/rec)180 703.2 R
-+1.418(ecord.conf that allo)-.1 F 1.418(ws to identify a speci\214c)
- -.25 F(dri)180 715.2 Q .3 -.15(ve o)-.25 H 2.5(nt).15 G(he system.)-2.5
- E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065
- (chilling V)-2.5 F(ersion 2.0)-1.11 E(12)201.225 E EP
-diff -ruN cdrtools-2.0-/doc/readcd.man cdrtools-2.0/doc/readcd.man
---- cdrtools-2.0-/doc/readcd.man Tue Dec 24 16:56:07 2002
-+++ cdrtools-2.0/doc/readcd.man Thu Dec 26 18:25:53 2002
-@@ -96,7 +96,7 @@
- If the argument to the d\bde\bev\bv=\b= option does not contain
- the characters ',', '/', '@' or ':', it is inter-
- preted as an label name that may be found in the
-- file /etc/default/cdrecord (see FILES section).
-+ file /etc/cdrecord.conf (see FILES section).
-
- t\bti\bim\bme\beo\bou\but\bt=\b=_\b#
- Set the default SCSI command timeout value to _\b#
-diff -ruN cdrtools-2.0-/doc/readcd.ps cdrtools-2.0/doc/readcd.ps
---- cdrtools-2.0-/doc/readcd.ps Tue Dec 24 16:56:28 2002
-+++ cdrtools-2.0/doc/readcd.ps Thu Dec 26 18:25:53 2002
-@@ -330,8 +330,8 @@
- 120 R 1.046(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
- (option does not contain the characters ',)3.547 F 1.047
- (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
--(preted as an label name that may be found in the \214le /etc/def)144
--132 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
-+(preted as an label name that may be found in the \214le /etc/cdr)144
-+132 Q(ecord.conf \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
- F1(#).48 E F0 .13(Set the def)144 160.8 R .13
- (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F1(#)2.63 E F0
- 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
-diff -ruN cdrtools-2.0-/doc/scgcheck.man cdrtools-2.0/doc/scgcheck.man
---- cdrtools-2.0-/doc/scgcheck.man Tue Dec 24 16:56:55 2002
-+++ cdrtools-2.0/doc/scgcheck.man Thu Dec 26 18:25:53 2002
-@@ -90,7 +90,7 @@
- If the argument to the d\bde\bev\bv=\b= option does not contain
- the characters ',', '/', '@' or ':', it is inter-
- preted as an label name that may be found in the
-- file /etc/default/cdrecord (see FILES section).
-+ file /etc/cdrecord.conf (see FILES section).
-
- t\bti\bim\bme\beo\bou\but\bt=\b=_\b#
- Set the default SCSI command timeout value to _\b#
-diff -ruN cdrtools-2.0-/doc/scgcheck.ps cdrtools-2.0/doc/scgcheck.ps
---- cdrtools-2.0-/doc/scgcheck.ps Tue Dec 24 16:57:15 2002
-+++ cdrtools-2.0/doc/scgcheck.ps Thu Dec 26 18:25:53 2002
-@@ -317,8 +317,8 @@
- 1.047(gument to the)-.18 F/F1 10/Times-Bold@0 SF(de)3.547 E(v=)-.15 E F0
- 1.047(option does not contain the characters ',)3.547 F 1.047
- (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
--(preted as an label name that may be found in the \214le /etc/def)144 96
--Q(ault/cdrecord \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
-+(preted as an label name that may be found in the \214le /etc/cdr)144 96
-+Q(ecord.conf \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
- 10/Times-Italic@0 SF(#).48 E F0 .13(Set the def)144 124.8 R .13
- (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F2(#)2.63 E F0
- 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
-diff -ruN cdrtools-2.0-/readcd/readcd.1 cdrtools-2.0/readcd/readcd.1
---- cdrtools-2.0-/readcd/readcd.1 Tue Dec 24 16:28:41 2002
-+++ cdrtools-2.0/readcd/readcd.1 Thu Dec 26 18:25:53 2002
-@@ -186,7 +186,7 @@
+--- cdrtools-2.01.01.orig/readcd/readcd.1 2010-01-29 23:27:12.000000000 +0100
++++ cdrtools-2.01.01/readcd/readcd.1 2010-02-08 14:15:04.000000000 +0100
+@@ -64,7 +64,7 @@
+ explained below refers to
+ .IR scsibus / target / lun
+ of the CD/DVD/BluRay-Recorder.
+-If a file /etc/default/cdrecord exists, the parameter to the
++If a file /etc/cdrecord.conf exists, the parameter to the
.B dev=
- option does not contain the characters ',', '/', '@' or ':',
- it is interpreted as an label name that may be found in the file
--/etc/default/cdrecord (see FILES section).
-+/etc/cdrecord.conf (see FILES section).
- .TP
- .BI timeout= #
- Set the default SCSI command timeout value to
-diff -ruN cdrtools-2.0-/scgcheck/scgcheck.1 cdrtools-2.0/scgcheck/scgcheck.1
---- cdrtools-2.0-/scgcheck/scgcheck.1 Tue Dec 24 16:32:01 2002
-+++ cdrtools-2.0/scgcheck/scgcheck.1 Thu Dec 26 18:25:53 2002
-@@ -170,7 +170,7 @@
+ option may also be a drive name label in said file (see FILES section).
+
+@@ -440,7 +440,7 @@
+ .B CDR_DEVICE
+ environment.
+ .sp
+-If a file /etc/default/cdrecord exists, and
++If a file /etc/cdrecord.conf exists, and
+ if the argument to the
.B dev=
- option does not contain the characters ',', '/', '@' or ':',
- it is interpreted as an label name that may be found in the file
+ option
+@@ -449,7 +449,7 @@
+ environment
+ does not contain the characters ',', '/', '@' or ':',
+ it is interpreted as a device label name that was defined in the file
-/etc/default/cdrecord (see FILES section).
+/etc/cdrecord.conf (see FILES section).
- .TP
- .BI timeout= #
- Set the default SCSI command timeout value to
+ .sp
+ .B \h'-2m'Autotarget Mode
+ .br
projects / packages / cdrtools.git / blobdiff