-diff -Nru bzip2-1.0.2/Makefile.am bzip2-1.0.2.new/Makefile.am
---- bzip2-1.0.2/Makefile.am Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/Makefile.am Fri Feb 1 04:19:09 2002
-@@ -0,0 +1,31 @@
-+SUBDIRS = doc
-+
-+bin_PROGRAMS = bzip2 bzip2recover
-+bzip2_SOURCES = bzip2.c
-+
-+bzip2_LDADD = libbz2.la
-+bzip2recover_SOURCES = bzip2recover.c
-+lib_LTLIBRARIES = libbz2.la
-+libbz2_la_SOURCES = \
+--- bzip2-1.0.5.orig/configure.ac 1970-01-01 01:00:00.000000000 +0100
++++ bzip2-1.0.5/configure.ac 2008-03-22 16:15:55.057937371 +0100
+@@ -0,0 +1,9 @@
++AC_INIT([bzip2], [1.0.5])
++AM_INIT_AUTOMAKE
++AC_CONFIG_HEADER([config.h])
++AC_PROG_CC
++AC_PROG_LIBTOOL
++AC_PROG_LN_S
++AC_SYS_LARGEFILE
++AC_CONFIG_FILES([Makefile])
++AC_OUTPUT
+--- bzip2-1.0.5.orig/Makefile.am 1970-01-01 01:00:00.000000000 +0100
++++ bzip2-1.0.5/Makefile.am 2008-03-22 16:14:38.913593962 +0100
+@@ -0,0 +1,37 @@
++include_HEADERS = bzlib.h bzlib_private.h
++lib_LTLIBRARIES = libbz2.la
++bin_PROGRAMS = bzip2 bzip2recover
++bin_SCRIPTS = bzdiff bzgrep bzmore
++man_MANS = bzip2.1 bzgrep.1 bzmore.1 bzdiff.1
++
++libbz2_la_SOURCES = \
+ blocksort.c \
+ huffman.c \
+ crctable.c \
+ bzlib.c \
+ bzlib.h \
+ bzlib_private.h
-+
+libbz2_la_LDFLAGS = -version-info 1:0:0
-+include_HEADERS = bzlib.h bzlib_private.h
-+
-+bin_SCRIPTS = bzless bzgrep
+
-+EXTRA_DIST = README README.COMPILATION.PROBLEMS \
-+ Y2K_INFO libbz2.def libbz2.dsp \
-+ sample1.bz2 sample1.ref sample2.bz2 sample2.ref sample3.bz2 sample3.ref
++bzip2_SOURCES = bzip2.c
++bzip2_LDADD = libbz2.la
+
+install-exec-hook:
+ $(LN_S) -f bzip2 $(DESTDIR)$(bindir)/bunzip2
+ $(LN_S) -f bzip2 $(DESTDIR)$(bindir)/bzcat
-diff -Nru bzip2-1.0.2/bzdiff.1 bzip2-1.0.2.new/bzdiff.1
---- bzip2-1.0.2/bzdiff.1 Sun Dec 30 03:12:35 2001
-+++ bzip2-1.0.2.new/bzdiff.1 Thu Jan 1 01:00:00 1970
-@@ -1,47 +0,0 @@
--\"Shamelessly copied from zmore.1 by Philippe Troin <phil@fifi.org>
--\"for Debian GNU/Linux
--.TH BZDIFF 1
--.SH NAME
--bzcmp, bzdiff \- compare bzip2 compressed files
--.SH SYNOPSIS
--.B bzcmp
--[ cmp_options ] file1
--[ file2 ]
--.br
--.B bzdiff
--[ diff_options ] file1
--[ file2 ]
--.SH DESCRIPTION
--.I Bzcmp
--and
--.I bzdiff
--are used to invoke the
--.I cmp
--or the
--.I diff
--program on bzip2 compressed files. All options specified are passed
--directly to
--.I cmp
--or
--.IR diff "."
--If only 1 file is specified, then the files compared are
--.I file1
--and an uncompressed
--.IR file1 ".bz2."
--If two files are specified, then they are uncompressed if necessary and fed to
--.I cmp
--or
--.IR diff "."
--The exit status from
--.I cmp
--or
--.I diff
--is preserved.
--.SH "SEE ALSO"
--cmp(1), diff(1), bzmore(1), bzless(1), bzgrep(1), bzip2(1)
--.SH BUGS
--Messages from the
--.I cmp
--or
--.I diff
--programs refer to temporary filenames instead of those specified.
-diff -Nru bzip2-1.0.2/bzgrep.1 bzip2-1.0.2.new/bzgrep.1
---- bzip2-1.0.2/bzgrep.1 Sun Dec 30 03:12:35 2001
-+++ bzip2-1.0.2.new/bzgrep.1 Thu Jan 1 01:00:00 1970
-@@ -1,56 +0,0 @@
--\"Shamelessly copied from zmore.1 by Philippe Troin <phil@fifi.org>
--\"for Debian GNU/Linux
--.TH BZGREP 1
--.SH NAME
--bzgrep, bzfgrep, bzegrep \- search possibly bzip2 compressed files for a regular expression
--.SH SYNOPSIS
--.B bzgrep
--[ grep_options ]
--.BI [\ -e\ ] " pattern"
--.IR filename ".\|.\|."
--.br
--.B bzegrep
--[ egrep_options ]
--.BI [\ -e\ ] " pattern"
--.IR filename ".\|.\|."
--.br
--.B bzfgrep
--[ fgrep_options ]
--.BI [\ -e\ ] " pattern"
--.IR filename ".\|.\|."
--.SH DESCRIPTION
--.IR Bzgrep
--is used to invoke the
--.I grep
--on bzip2-compressed files. All options specified are passed directly to
--.I grep.
--If no file is specified, then the standard input is decompressed
--if necessary and fed to grep.
--Otherwise the given files are uncompressed if necessary and fed to
--.I grep.
--.PP
--If
--.I bzgrep
--is invoked as
--.I bzegrep
--or
--.I bzfgrep
--then
--.I egrep
--or
--.I fgrep
--is used instead of
--.I grep.
--If the GREP environment variable is set,
--.I bzgrep
--uses it as the
--.I grep
--program to be invoked. For example:
--
-- for sh: GREP=fgrep bzgrep string files
-- for csh: (setenv GREP fgrep; bzgrep string files)
--.SH AUTHOR
--Charles Levert (charles@comm.polymtl.ca). Adapted to bzip2 by Philippe
--Troin <phil@fifi.org> for Debian GNU/Linux.
--.SH "SEE ALSO"
--grep(1), egrep(1), fgrep(1), bzdiff(1), bzmore(1), bzless(1), bzip2(1)
-diff -Nru bzip2-1.0.2/bzless bzip2-1.0.2.new/bzless
---- bzip2-1.0.2/bzless Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/bzless Fri Feb 1 04:19:11 2002
-@@ -0,0 +1,2 @@
-+#!/bin/sh
-+%{_bindir}/bunzip2 -c "$@" | %{_bindir}/less
-diff -Nru bzip2-1.0.2/bzmore.1 bzip2-1.0.2.new/bzmore.1
---- bzip2-1.0.2/bzmore.1 Sun Dec 30 03:12:35 2001
-+++ bzip2-1.0.2.new/bzmore.1 Thu Jan 1 01:00:00 1970
-@@ -1,152 +0,0 @@
--.\"Shamelessly copied from zmore.1 by Philippe Troin <phil@fifi.org>
--.\"for Debian GNU/Linux
--.TH BZMORE 1
--.SH NAME
--bzmore, bzless \- file perusal filter for crt viewing of bzip2 compressed text
--.SH SYNOPSIS
--.B bzmore
--[ name ... ]
--.br
--.B bzless
--[ name ... ]
--.SH NOTE
--In the following description,
--.I bzless
--and
--.I less
--can be used interchangeably with
--.I bzmore
--and
--.I more.
--.SH DESCRIPTION
--.I Bzmore
--is a filter which allows examination of compressed or plain text files
--one screenful at a time on a soft-copy terminal.
--.I bzmore
--works on files compressed with
--.I bzip2
--and also on uncompressed files.
--If a file does not exist,
--.I bzmore
--looks for a file of the same name with the addition of a .bz2 suffix.
--.PP
--.I Bzmore
--normally pauses after each screenful, printing --More--
--at the bottom of the screen.
--If the user then types a carriage return, one more line is displayed.
--If the user hits a space,
--another screenful is displayed. Other possibilities are enumerated later.
--.PP
--.I Bzmore
--looks in the file
--.I /etc/termcap
--to determine terminal characteristics,
--and to determine the default window size.
--On a terminal capable of displaying 24 lines,
--the default window size is 22 lines.
--Other sequences which may be typed when
--.I bzmore
--pauses, and their effects, are as follows (\fIi\fP is an optional integer
--argument, defaulting to 1) :
--.PP
--.IP \fIi\|\fP<space>
--display
--.I i
--more lines, (or another screenful if no argument is given)
--.PP
--.IP ^D
--display 11 more lines (a ``scroll'').
--If
--.I i
--is given, then the scroll size is set to \fIi\|\fP.
--.PP
--.IP d
--same as ^D (control-D)
--.PP
--.IP \fIi\|\fPz
--same as typing a space except that \fIi\|\fP, if present, becomes the new
--window size. Note that the window size reverts back to the default at the
--end of the current file.
--.PP
--.IP \fIi\|\fPs
--skip \fIi\|\fP lines and print a screenful of lines
--.PP
--.IP \fIi\|\fPf
--skip \fIi\fP screenfuls and print a screenful of lines
--.PP
--.IP "q or Q"
--quit reading the current file; go on to the next (if any)
--.PP
--.IP "e or q"
--When the prompt --More--(Next file:
--.IR file )
--is printed, this command causes bzmore to exit.
--.PP
--.IP s
--When the prompt --More--(Next file:
--.IR file )
--is printed, this command causes bzmore to skip the next file and continue.
--.PP
--.IP =
--Display the current line number.
--.PP
--.IP \fIi\|\fP/expr
--search for the \fIi\|\fP-th occurrence of the regular expression \fIexpr.\fP
--If the pattern is not found,
--.I bzmore
--goes on to the next file (if any).
--Otherwise, a screenful is displayed, starting two lines before the place
--where the expression was found.
--The user's erase and kill characters may be used to edit the regular
--expression.
--Erasing back past the first column cancels the search command.
--.PP
--.IP \fIi\|\fPn
--search for the \fIi\|\fP-th occurrence of the last regular expression entered.
--.PP
--.IP !command
--invoke a shell with \fIcommand\|\fP.
--The character `!' in "command" are replaced with the
--previous shell command. The sequence "\\!" is replaced by "!".
--.PP
--.IP ":q or :Q"
--quit reading the current file; go on to the next (if any)
--(same as q or Q).
--.PP
--.IP .
--(dot) repeat the previous command.
--.PP
--The commands take effect immediately, i.e., it is not necessary to
--type a carriage return.
--Up to the time when the command character itself is given,
--the user may hit the line kill character to cancel the numerical
--argument being formed.
--In addition, the user may hit the erase character to redisplay the
----More-- message.
--.PP
--At any time when output is being sent to the terminal, the user can
--hit the quit key (normally control\-\\).
--.I Bzmore
--will stop sending output, and will display the usual --More--
--prompt.
--The user may then enter one of the above commands in the normal manner.
--Unfortunately, some output is lost when this is done, due to the
--fact that any characters waiting in the terminal's output queue
--are flushed when the quit signal occurs.
--.PP
--The terminal is set to
--.I noecho
--mode by this program so that the output can be continuous.
--What you type will thus not show on your terminal, except for the / and !
--commands.
--.PP
--If the standard output is not a teletype, then
--.I bzmore
--acts just like
--.I bzcat,
--except that a header is printed before each file.
--.SH FILES
--.DT
--/etc/termcap Terminal data base
--.SH "SEE ALSO"
--more(1), less(1), bzip2(1), bzdiff(1), bzgrep(1)
-diff -Nru bzip2-1.0.2/config.h.in bzip2-1.0.2.new/config.h.in
---- bzip2-1.0.2/config.h.in Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/config.h.in Fri Feb 1 04:19:11 2002
-@@ -0,0 +1,17 @@
-+/* config.h.in. Generated automatically from configure.in by autoheader. */
-+
-+/* Name of package */
-+#undef PACKAGE
-+
-+/* Version number of package */
-+#undef VERSION
-+
-+/* Number of bits in a file offset, on hosts where this is settable. */
-+#undef _FILE_OFFSET_BITS
-+
-+/* Define to make fseeko etc. visible, on some hosts. */
-+#undef _LARGEFILE_SOURCE
-+
-+/* Define for large files, on AIX-style hosts. */
-+#undef _LARGE_FILES
-+
-diff -Nru bzip2-1.0.2/configure.in bzip2-1.0.2.new/configure.in
---- bzip2-1.0.2/configure.in Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/configure.in Fri Feb 1 04:19:11 2002
-@@ -0,0 +1,10 @@
-+AC_INIT(bzip2.c)
-+AM_INIT_AUTOMAKE(bzip2,1.0.1)
-+AM_CONFIG_HEADER(config.h)
-+AC_PROG_CC
-+AM_PROG_LIBTOOL
-+AC_PROG_LN_S
-+AC_SYS_LARGEFILE
-+AC_OUTPUT(Makefile
-+ doc/Makefile
-+ doc/pl/Makefile)
-diff -Nru bzip2-1.0.2/crctable.c bzip2-1.0.2.new/crctable.c
++ $(LN_S) -f bzgrep $(DESTDIR)$(bindir)/bzegrep
++ $(LN_S) -f bzgrep $(DESTDIR)$(bindir)/bzfgrep
++ $(LN_S) -f bzmore $(DESTDIR)$(bindir)/bzless
++ $(LN_S) -f bzdiff $(DESTDIR)$(bindir)/bzcmp
++
++install-data-hook:
++ echo '.so bzip2.1' >$(DESTDIR)$(mandir)/man1/bzip2recover.1
++ echo '.so bzip2.1' >$(DESTDIR)$(mandir)/man1/bunzip2.1
++ echo '.so bzip2.1' >$(DESTDIR)$(mandir)/man1/bzcat.1
++ echo '.so bzgrep.1' >$(DESTDIR)$(mandir)/man1/bzegrep.1
++ echo '.so bzgrep.1' >$(DESTDIR)$(mandir)/man1/bzfgrep.1
++ echo '.so bzmore.1' >$(DESTDIR)$(mandir)/man1/bzless.1
++ echo '.so bzdiff.1' >$(DESTDIR)$(mandir)/man1/bzcmp.1
--- bzip2-1.0.2/crctable.c Sun Dec 30 03:19:28 2001
+++ bzip2-1.0.2.new/crctable.c Fri Feb 1 04:19:11 2002
-@@ -58,6 +58,10 @@
+@@ -58,6 +58,9 @@
For more information on these sources, see the manual.
--*/
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
-+
#include "bzlib_private.h"
-diff -Nru bzip2-1.0.2/decompress.c bzip2-1.0.2.new/decompress.c
--- bzip2-1.0.2/decompress.c Sun Dec 30 21:45:53 2001
+++ bzip2-1.0.2.new/decompress.c Fri Feb 1 04:19:11 2002
-@@ -58,6 +58,10 @@
+@@ -58,6 +58,9 @@
For more information on these sources, see the manual.
--*/
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
-+
#include "bzlib_private.h"
-diff -Nru bzip2-1.0.2/dlltest.c bzip2-1.0.2.new/dlltest.c
--- bzip2-1.0.2/dlltest.c Sun Dec 30 20:44:07 2001
+++ bzip2-1.0.2.new/dlltest.c Fri Feb 1 04:19:11 2002
@@ -8,6 +8,10 @@
#define BZ_IMPORT\r
#include <stdio.h>\r
#include <stdlib.h>\r
-diff -Nru bzip2-1.0.2/doc/Makefile.am bzip2-1.0.2.new/doc/Makefile.am
---- bzip2-1.0.2/doc/Makefile.am Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/Makefile.am Fri Feb 1 04:27:21 2002
-@@ -0,0 +1,6 @@
-+
-+SUBDIRS = pl
-+
-+man_MANS = bunzip2.1 bzcat.1 bzdiff.1 bzgrep.1 bzip2.1 \
-+ bzip2recover.1 bzmore.1
-+#info_TEXINFOS = bzip2.texi
-diff -Nru bzip2-1.0.2/doc/bunzip2.1 bzip2-1.0.2.new/doc/bunzip2.1
---- bzip2-1.0.2/doc/bunzip2.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/bunzip2.1 Fri Feb 1 04:19:11 2002
-@@ -0,0 +1 @@
-+.so bzip2.1
-\ No newline at end of file
-diff -Nru bzip2-1.0.2/doc/bzcat.1 bzip2-1.0.2.new/doc/bzcat.1
---- bzip2-1.0.2/doc/bzcat.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/bzcat.1 Fri Feb 1 04:19:11 2002
-@@ -0,0 +1 @@
-+.so bzip2.1
-\ No newline at end of file
-diff -Nru bzip2-1.0.2/doc/bzdiff.1 bzip2-1.0.2.new/doc/bzdiff.1
---- bzip2-1.0.2/doc/bzdiff.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/bzdiff.1 Sun Dec 30 03:12:35 2001
-@@ -0,0 +1,47 @@
-+\"Shamelessly copied from zmore.1 by Philippe Troin <phil@fifi.org>
-+\"for Debian GNU/Linux
-+.TH BZDIFF 1
-+.SH NAME
-+bzcmp, bzdiff \- compare bzip2 compressed files
-+.SH SYNOPSIS
-+.B bzcmp
-+[ cmp_options ] file1
-+[ file2 ]
-+.br
-+.B bzdiff
-+[ diff_options ] file1
-+[ file2 ]
-+.SH DESCRIPTION
-+.I Bzcmp
-+and
-+.I bzdiff
-+are used to invoke the
-+.I cmp
-+or the
-+.I diff
-+program on bzip2 compressed files. All options specified are passed
-+directly to
-+.I cmp
-+or
-+.IR diff "."
-+If only 1 file is specified, then the files compared are
-+.I file1
-+and an uncompressed
-+.IR file1 ".bz2."
-+If two files are specified, then they are uncompressed if necessary and fed to
-+.I cmp
-+or
-+.IR diff "."
-+The exit status from
-+.I cmp
-+or
-+.I diff
-+is preserved.
-+.SH "SEE ALSO"
-+cmp(1), diff(1), bzmore(1), bzless(1), bzgrep(1), bzip2(1)
-+.SH BUGS
-+Messages from the
-+.I cmp
-+or
-+.I diff
-+programs refer to temporary filenames instead of those specified.
-diff -Nru bzip2-1.0.2/doc/bzgrep.1 bzip2-1.0.2.new/doc/bzgrep.1
---- bzip2-1.0.2/doc/bzgrep.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/bzgrep.1 Sun Dec 30 03:12:35 2001
-@@ -0,0 +1,56 @@
-+\"Shamelessly copied from zmore.1 by Philippe Troin <phil@fifi.org>
-+\"for Debian GNU/Linux
-+.TH BZGREP 1
-+.SH NAME
-+bzgrep, bzfgrep, bzegrep \- search possibly bzip2 compressed files for a regular expression
-+.SH SYNOPSIS
-+.B bzgrep
-+[ grep_options ]
-+.BI [\ -e\ ] " pattern"
-+.IR filename ".\|.\|."
-+.br
-+.B bzegrep
-+[ egrep_options ]
-+.BI [\ -e\ ] " pattern"
-+.IR filename ".\|.\|."
-+.br
-+.B bzfgrep
-+[ fgrep_options ]
-+.BI [\ -e\ ] " pattern"
-+.IR filename ".\|.\|."
-+.SH DESCRIPTION
-+.IR Bzgrep
-+is used to invoke the
-+.I grep
-+on bzip2-compressed files. All options specified are passed directly to
-+.I grep.
-+If no file is specified, then the standard input is decompressed
-+if necessary and fed to grep.
-+Otherwise the given files are uncompressed if necessary and fed to
-+.I grep.
-+.PP
-+If
-+.I bzgrep
-+is invoked as
-+.I bzegrep
-+or
-+.I bzfgrep
-+then
-+.I egrep
-+or
-+.I fgrep
-+is used instead of
-+.I grep.
-+If the GREP environment variable is set,
-+.I bzgrep
-+uses it as the
-+.I grep
-+program to be invoked. For example:
-+
-+ for sh: GREP=fgrep bzgrep string files
-+ for csh: (setenv GREP fgrep; bzgrep string files)
-+.SH AUTHOR
-+Charles Levert (charles@comm.polymtl.ca). Adapted to bzip2 by Philippe
-+Troin <phil@fifi.org> for Debian GNU/Linux.
-+.SH "SEE ALSO"
-+grep(1), egrep(1), fgrep(1), bzdiff(1), bzmore(1), bzless(1), bzip2(1)
-diff -Nru bzip2-1.0.2/doc/bzip2.1 bzip2-1.0.2.new/doc/bzip2.1
---- bzip2-1.0.2/doc/bzip2.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/bzip2.1 Thu Jan 3 00:14:36 2002
-@@ -0,0 +1,453 @@
-+.PU
-+.TH bzip2 1
-+.SH NAME
-+bzip2, bunzip2 \- a block-sorting file compressor, v1.0.2
-+.br
-+bzcat \- decompresses files to stdout
-+.br
-+bzip2recover \- recovers data from damaged bzip2 files
-+
-+.SH SYNOPSIS
-+.ll +8
-+.B bzip2
-+.RB [ " \-cdfkqstvzVL123456789 " ]
-+[
-+.I "filenames \&..."
-+]
-+.ll -8
-+.br
-+.B bunzip2
-+.RB [ " \-fkvsVL " ]
-+[
-+.I "filenames \&..."
-+]
-+.br
-+.B bzcat
-+.RB [ " \-s " ]
-+[
-+.I "filenames \&..."
-+]
-+.br
-+.B bzip2recover
-+.I "filename"
-+
-+.SH DESCRIPTION
-+.I bzip2
-+compresses files using the Burrows-Wheeler block sorting
-+text compression algorithm, and Huffman coding. Compression is
-+generally considerably better than that achieved by more conventional
-+LZ77/LZ78-based compressors, and approaches the performance of the PPM
-+family of statistical compressors.
-+
-+The command-line options are deliberately very similar to
-+those of
-+.I GNU gzip,
-+but they are not identical.
-+
-+.I bzip2
-+expects a list of file names to accompany the
-+command-line flags. Each file is replaced by a compressed version of
-+itself, with the name "original_name.bz2".
-+Each compressed file
-+has the same modification date, permissions, and, when possible,
-+ownership as the corresponding original, so that these properties can
-+be correctly restored at decompression time. File name handling is
-+naive in the sense that there is no mechanism for preserving original
-+file names, permissions, ownerships or dates in filesystems which lack
-+these concepts, or have serious file name length restrictions, such as
-+MS-DOS.
-+
-+.I bzip2
-+and
-+.I bunzip2
-+will by default not overwrite existing
-+files. If you want this to happen, specify the \-f flag.
-+
-+If no file names are specified,
-+.I bzip2
-+compresses from standard
-+input to standard output. In this case,
-+.I bzip2
-+will decline to
-+write compressed output to a terminal, as this would be entirely
-+incomprehensible and therefore pointless.
-+
-+.I bunzip2
-+(or
-+.I bzip2 \-d)
-+decompresses all
-+specified files. Files which were not created by
-+.I bzip2
-+will be detected and ignored, and a warning issued.
-+.I bzip2
-+attempts to guess the filename for the decompressed file
-+from that of the compressed file as follows:
-+
-+ filename.bz2 becomes filename
-+ filename.bz becomes filename
-+ filename.tbz2 becomes filename.tar
-+ filename.tbz becomes filename.tar
-+ anyothername becomes anyothername.out
-+
-+If the file does not end in one of the recognised endings,
-+.I .bz2,
-+.I .bz,
-+.I .tbz2
-+or
-+.I .tbz,
-+.I bzip2
-+complains that it cannot
-+guess the name of the original file, and uses the original name
-+with
-+.I .out
-+appended.
-+
-+As with compression, supplying no
-+filenames causes decompression from
-+standard input to standard output.
-+
-+.I bunzip2
-+will correctly decompress a file which is the
-+concatenation of two or more compressed files. The result is the
-+concatenation of the corresponding uncompressed files. Integrity
-+testing (\-t)
-+of concatenated
-+compressed files is also supported.
-+
-+You can also compress or decompress files to the standard output by
-+giving the \-c flag. Multiple files may be compressed and
-+decompressed like this. The resulting outputs are fed sequentially to
-+stdout. Compression of multiple files
-+in this manner generates a stream
-+containing multiple compressed file representations. Such a stream
-+can be decompressed correctly only by
-+.I bzip2
-+version 0.9.0 or
-+later. Earlier versions of
-+.I bzip2
-+will stop after decompressing
-+the first file in the stream.
-+
-+.I bzcat
-+(or
-+.I bzip2 -dc)
-+decompresses all specified files to
-+the standard output.
-+
-+.I bzip2
-+will read arguments from the environment variables
-+.I BZIP2
-+and
-+.I BZIP,
-+in that order, and will process them
-+before any arguments read from the command line. This gives a
-+convenient way to supply default arguments.
-+
-+Compression is always performed, even if the compressed
-+file is slightly
-+larger than the original. Files of less than about one hundred bytes
-+tend to get larger, since the compression mechanism has a constant
-+overhead in the region of 50 bytes. Random data (including the output
-+of most file compressors) is coded at about 8.05 bits per byte, giving
-+an expansion of around 0.5%.
-+
-+As a self-check for your protection,
-+.I
-+bzip2
-+uses 32-bit CRCs to
-+make sure that the decompressed version of a file is identical to the
-+original. This guards against corruption of the compressed data, and
-+against undetected bugs in
-+.I bzip2
-+(hopefully very unlikely). The
-+chances of data corruption going undetected is microscopic, about one
-+chance in four billion for each file processed. Be aware, though, that
-+the check occurs upon decompression, so it can only tell you that
-+something is wrong. It can't help you
-+recover the original uncompressed
-+data. You can use
-+.I bzip2recover
-+to try to recover data from
-+damaged files.
-+
-+Return values: 0 for a normal exit, 1 for environmental problems (file
-+not found, invalid flags, I/O errors, &c), 2 to indicate a corrupt
-+compressed file, 3 for an internal consistency error (eg, bug) which
-+caused
-+.I bzip2
-+to panic.
-+
-+.SH OPTIONS
-+.TP
-+.B \-c --stdout
-+Compress or decompress to standard output.
-+.TP
-+.B \-d --decompress
-+Force decompression.
-+.I bzip2,
-+.I bunzip2
-+and
-+.I bzcat
-+are
-+really the same program, and the decision about what actions to take is
-+done on the basis of which name is used. This flag overrides that
-+mechanism, and forces
-+.I bzip2
-+to decompress.
-+.TP
-+.B \-z --compress
-+The complement to \-d: forces compression, regardless of the
-+invocation name.
-+.TP
-+.B \-t --test
-+Check integrity of the specified file(s), but don't decompress them.
-+This really performs a trial decompression and throws away the result.
-+.TP
-+.B \-f --force
-+Force overwrite of output files. Normally,
-+.I bzip2
-+will not overwrite
-+existing output files. Also forces
-+.I bzip2
-+to break hard links
-+to files, which it otherwise wouldn't do.
-+
-+bzip2 normally declines to decompress files which don't have the
-+correct magic header bytes. If forced (-f), however, it will pass
-+such files through unmodified. This is how GNU gzip behaves.
-+.TP
-+.B \-k --keep
-+Keep (don't delete) input files during compression
-+or decompression.
-+.TP
-+.B \-s --small
-+Reduce memory usage, for compression, decompression and testing. Files
-+are decompressed and tested using a modified algorithm which only
-+requires 2.5 bytes per block byte. This means any file can be
-+decompressed in 2300k of memory, albeit at about half the normal speed.
-+
-+During compression, \-s selects a block size of 200k, which limits
-+memory use to around the same figure, at the expense of your compression
-+ratio. In short, if your machine is low on memory (8 megabytes or
-+less), use \-s for everything. See MEMORY MANAGEMENT below.
-+.TP
-+.B \-q --quiet
-+Suppress non-essential warning messages. Messages pertaining to
-+I/O errors and other critical events will not be suppressed.
-+.TP
-+.B \-v --verbose
-+Verbose mode -- show the compression ratio for each file processed.
-+Further \-v's increase the verbosity level, spewing out lots of
-+information which is primarily of interest for diagnostic purposes.
-+.TP
-+.B \-L --license -V --version
-+Display the software version, license terms and conditions.
-+.TP
-+.B \-1 (or \-\-fast) to \-9 (or \-\-best)
-+Set the block size to 100 k, 200 k .. 900 k when compressing. Has no
-+effect when decompressing. See MEMORY MANAGEMENT below.
-+The \-\-fast and \-\-best aliases are primarily for GNU gzip
-+compatibility. In particular, \-\-fast doesn't make things
-+significantly faster.
-+And \-\-best merely selects the default behaviour.
-+.TP
-+.B \--
-+Treats all subsequent arguments as file names, even if they start
-+with a dash. This is so you can handle files with names beginning
-+with a dash, for example: bzip2 \-- \-myfilename.
-+.TP
-+.B \--repetitive-fast --repetitive-best
-+These flags are redundant in versions 0.9.5 and above. They provided
-+some coarse control over the behaviour of the sorting algorithm in
-+earlier versions, which was sometimes useful. 0.9.5 and above have an
-+improved algorithm which renders these flags irrelevant.
-+
-+.SH MEMORY MANAGEMENT
-+.I bzip2
-+compresses large files in blocks. The block size affects
-+both the compression ratio achieved, and the amount of memory needed for
-+compression and decompression. The flags \-1 through \-9
-+specify the block size to be 100,000 bytes through 900,000 bytes (the
-+default) respectively. At decompression time, the block size used for
-+compression is read from the header of the compressed file, and
-+.I bunzip2
-+then allocates itself just enough memory to decompress
-+the file. Since block sizes are stored in compressed files, it follows
-+that the flags \-1 to \-9 are irrelevant to and so ignored
-+during decompression.
-+
-+Compression and decompression requirements,
-+in bytes, can be estimated as:
-+
-+ Compression: 400k + ( 8 x block size )
-+
-+ Decompression: 100k + ( 4 x block size ), or
-+ 100k + ( 2.5 x block size )
-+
-+Larger block sizes give rapidly diminishing marginal returns. Most of
-+the compression comes from the first two or three hundred k of block
-+size, a fact worth bearing in mind when using
-+.I bzip2
-+on small machines.
-+It is also important to appreciate that the decompression memory
-+requirement is set at compression time by the choice of block size.
-+
-+For files compressed with the default 900k block size,
-+.I bunzip2
-+will require about 3700 kbytes to decompress. To support decompression
-+of any file on a 4 megabyte machine,
-+.I bunzip2
-+has an option to
-+decompress using approximately half this amount of memory, about 2300
-+kbytes. Decompression speed is also halved, so you should use this
-+option only where necessary. The relevant flag is -s.
-+
-+In general, try and use the largest block size memory constraints allow,
-+since that maximises the compression achieved. Compression and
-+decompression speed are virtually unaffected by block size.
-+
-+Another significant point applies to files which fit in a single block
-+-- that means most files you'd encounter using a large block size. The
-+amount of real memory touched is proportional to the size of the file,
-+since the file is smaller than a block. For example, compressing a file
-+20,000 bytes long with the flag -9 will cause the compressor to
-+allocate around 7600k of memory, but only touch 400k + 20000 * 8 = 560
-+kbytes of it. Similarly, the decompressor will allocate 3700k but only
-+touch 100k + 20000 * 4 = 180 kbytes.
-+
-+Here is a table which summarises the maximum memory usage for different
-+block sizes. Also recorded is the total compressed size for 14 files of
-+the Calgary Text Compression Corpus totalling 3,141,622 bytes. This
-+column gives some feel for how compression varies with block size.
-+These figures tend to understate the advantage of larger block sizes for
-+larger files, since the Corpus is dominated by smaller files.
-+
-+ Compress Decompress Decompress Corpus
-+ Flag usage usage -s usage Size
-+
-+ -1 1200k 500k 350k 914704
-+ -2 2000k 900k 600k 877703
-+ -3 2800k 1300k 850k 860338
-+ -4 3600k 1700k 1100k 846899
-+ -5 4400k 2100k 1350k 845160
-+ -6 5200k 2500k 1600k 838626
-+ -7 6100k 2900k 1850k 834096
-+ -8 6800k 3300k 2100k 828642
-+ -9 7600k 3700k 2350k 828642
-+
-+.SH RECOVERING DATA FROM DAMAGED FILES
-+.I bzip2
-+compresses files in blocks, usually 900kbytes long. Each
-+block is handled independently. If a media or transmission error causes
-+a multi-block .bz2
-+file to become damaged, it may be possible to
-+recover data from the undamaged blocks in the file.
-+
-+The compressed representation of each block is delimited by a 48-bit
-+pattern, which makes it possible to find the block boundaries with
-+reasonable certainty. Each block also carries its own 32-bit CRC, so
-+damaged blocks can be distinguished from undamaged ones.
-+
-+.I bzip2recover
-+is a simple program whose purpose is to search for
-+blocks in .bz2 files, and write each block out into its own .bz2
-+file. You can then use
-+.I bzip2
-+\-t
-+to test the
-+integrity of the resulting files, and decompress those which are
-+undamaged.
-+
-+.I bzip2recover
-+takes a single argument, the name of the damaged file,
-+and writes a number of files "rec00001file.bz2",
-+"rec00002file.bz2", etc, containing the extracted blocks.
-+The output filenames are designed so that the use of
-+wildcards in subsequent processing -- for example,
-+"bzip2 -dc rec*file.bz2 > recovered_data" -- processes the files in
-+the correct order.
-+
-+.I bzip2recover
-+should be of most use dealing with large .bz2
-+files, as these will contain many blocks. It is clearly
-+futile to use it on damaged single-block files, since a
-+damaged block cannot be recovered. If you wish to minimise
-+any potential data loss through media or transmission errors,
-+you might consider compressing with a smaller
-+block size.
-+
-+.SH PERFORMANCE NOTES
-+The sorting phase of compression gathers together similar strings in the
-+file. Because of this, files containing very long runs of repeated
-+symbols, like "aabaabaabaab ..." (repeated several hundred times) may
-+compress more slowly than normal. Versions 0.9.5 and above fare much
-+better than previous versions in this respect. The ratio between
-+worst-case and average-case compression time is in the region of 10:1.
-+For previous versions, this figure was more like 100:1. You can use the
-+\-vvvv option to monitor progress in great detail, if you want.
-+
-+Decompression speed is unaffected by these phenomena.
-+
-+.I bzip2
-+usually allocates several megabytes of memory to operate
-+in, and then charges all over it in a fairly random fashion. This means
-+that performance, both for compressing and decompressing, is largely
-+determined by the speed at which your machine can service cache misses.
-+Because of this, small changes to the code to reduce the miss rate have
-+been observed to give disproportionately large performance improvements.
-+I imagine
-+.I bzip2
-+will perform best on machines with very large caches.
-+
-+.SH CAVEATS
-+I/O error messages are not as helpful as they could be.
-+.I bzip2
-+tries hard to detect I/O errors and exit cleanly, but the details of
-+what the problem is sometimes seem rather misleading.
-+
-+This manual page pertains to version 1.0.2 of
-+.I bzip2.
-+Compressed data created by this version is entirely forwards and
-+backwards compatible with the previous public releases, versions
-+0.1pl2, 0.9.0, 0.9.5, 1.0.0 and 1.0.1, but with the following
-+exception: 0.9.0 and above can correctly decompress multiple
-+concatenated compressed files. 0.1pl2 cannot do this; it will stop
-+after decompressing just the first file in the stream.
-+
-+.I bzip2recover
-+versions prior to this one, 1.0.2, used 32-bit integers to represent
-+bit positions in compressed files, so it could not handle compressed
-+files more than 512 megabytes long. Version 1.0.2 and above uses
-+64-bit ints on some platforms which support them (GNU supported
-+targets, and Windows). To establish whether or not bzip2recover was
-+built with such a limitation, run it without arguments. In any event
-+you can build yourself an unlimited version if you can recompile it
-+with MaybeUInt64 set to be an unsigned 64-bit integer.
-+
-+
-+
-+.SH AUTHOR
-+Julian Seward, jseward@acm.org.
-+
-+http://sources.redhat.com/bzip2
-+
-+The ideas embodied in
-+.I bzip2
-+are due to (at least) the following
-+people: Michael Burrows and David Wheeler (for the block sorting
-+transformation), David Wheeler (again, for the Huffman coder), Peter
-+Fenwick (for the structured coding model in the original
-+.I bzip,
-+and many refinements), and Alistair Moffat, Radford Neal and Ian Witten
-+(for the arithmetic coder in the original
-+.I bzip).
-+I am much
-+indebted for their help, support and advice. See the manual in the
-+source distribution for pointers to sources of documentation. Christian
-+von Roques encouraged me to look for faster sorting algorithms, so as to
-+speed up compression. Bela Lubkin encouraged me to improve the
-+worst-case compression performance.
-+The bz* scripts are derived from those of GNU gzip.
-+Many people sent patches, helped
-+with portability problems, lent machines, gave advice and were generally
-+helpful.
-diff -Nru bzip2-1.0.2/doc/bzip2.texi bzip2-1.0.2.new/doc/bzip2.texi
---- bzip2-1.0.2/doc/bzip2.texi Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/bzip2.texi Fri Feb 1 04:26:21 2002
-@@ -0,0 +1,2234 @@
-+\input texinfo @c -*- Texinfo -*-
-+@setfilename bzip2.info
-+
-+@ignore
-+This file documents bzip2 version 1.0.2, and associated library
-+libbzip2, written by Julian Seward (jseward@acm.org).
-+
-+Copyright (C) 1996-2002 Julian R Seward
-+
-+Permission is granted to make and distribute verbatim copies of
-+this manual provided the copyright notice and this permission notice
-+are preserved on all copies.
-+
-+Permission is granted to copy and distribute translations of this manual
-+into another language, under the above conditions for verbatim copies.
-+@end ignore
-+
-+@iftex
-+@c @finalout
-+@settitle bzip2 and libbzip2
-+@titlepage
-+@title bzip2 and libbzip2
-+@subtitle a program and library for data compression
-+@subtitle copyright (C) 1996-2002 Julian Seward
-+@subtitle version 1.0.2 of 30 December 2001
-+@author Julian Seward
-+
-+@end titlepage
-+
-+@parindent 0mm
-+@parskip 2mm
-+
-+@end iftex
-+@node Top,,, (dir)
-+
-+The following text is the License for this software. You should
-+find it identical to that contained in the file LICENSE in the
-+source distribution.
-+
-+------------------ START OF THE LICENSE ------------------
-+
-+This program, @code{bzip2},
-+and associated library @code{libbzip2}, are
-+Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
-+
-+Redistribution and use in source and binary forms, with or without
-+modification, are permitted provided that the following conditions
-+are met:
-+@itemize @bullet
-+@item
-+ Redistributions of source code must retain the above copyright
-+ notice, this list of conditions and the following disclaimer.
-+@item
-+ The origin of this software must not be misrepresented; you must
-+ not claim that you wrote the original software. If you use this
-+ software in a product, an acknowledgment in the product
-+ documentation would be appreciated but is not required.
-+@item
-+ Altered source versions must be plainly marked as such, and must
-+ not be misrepresented as being the original software.
-+@item
-+ The name of the author may not be used to endorse or promote
-+ products derived from this software without specific prior written
-+ permission.
-+@end itemize
-+THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-+GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+
-+Julian Seward, Cambridge, UK.
-+
-+@code{jseward@@acm.org}
-+
-+@code{bzip2}/@code{libbzip2} version 1.0.2 of 30 December 2001.
-+
-+------------------ END OF THE LICENSE ------------------
-+
-+Web sites:
-+
-+@code{http://sources.redhat.com/bzip2}
-+
-+@code{http://www.cacheprof.org}
-+
-+PATENTS: To the best of my knowledge, @code{bzip2} does not use any patented
-+algorithms. However, I do not have the resources available to carry out
-+a full patent search. Therefore I cannot give any guarantee of the
-+above statement.
-+
-+
-+
-+
-+
-+
-+
-+@chapter Introduction
-+
-+@code{bzip2} compresses files using the Burrows-Wheeler
-+block-sorting text compression algorithm, and Huffman coding.
-+Compression is generally considerably better than that
-+achieved by more conventional LZ77/LZ78-based compressors,
-+and approaches the performance of the PPM family of statistical compressors.
-+
-+@code{bzip2} is built on top of @code{libbzip2}, a flexible library
-+for handling compressed data in the @code{bzip2} format. This manual
-+describes both how to use the program and
-+how to work with the library interface. Most of the
-+manual is devoted to this library, not the program,
-+which is good news if your interest is only in the program.
-+
-+Chapter 2 describes how to use @code{bzip2}; this is the only part
-+you need to read if you just want to know how to operate the program.
-+Chapter 3 describes the programming interfaces in detail, and
-+Chapter 4 records some miscellaneous notes which I thought
-+ought to be recorded somewhere.
-+
-+
-+@chapter How to use @code{bzip2}
-+
-+This chapter contains a copy of the @code{bzip2} man page,
-+and nothing else.
-+
-+@quotation
-+
-+@unnumberedsubsubsec NAME
-+@itemize
-+@item @code{bzip2}, @code{bunzip2}
-+- a block-sorting file compressor, v1.0.2
-+@item @code{bzcat}
-+- decompresses files to stdout
-+@item @code{bzip2recover}
-+- recovers data from damaged bzip2 files
-+@end itemize
-+
-+@unnumberedsubsubsec SYNOPSIS
-+@itemize
-+@item @code{bzip2} [ -cdfkqstvzVL123456789 ] [ filenames ... ]
-+@item @code{bunzip2} [ -fkvsVL ] [ filenames ... ]
-+@item @code{bzcat} [ -s ] [ filenames ... ]
-+@item @code{bzip2recover} filename
-+@end itemize
-+
-+@unnumberedsubsubsec DESCRIPTION
-+
-+@code{bzip2} compresses files using the Burrows-Wheeler block sorting
-+text compression algorithm, and Huffman coding. Compression is
-+generally considerably better than that achieved by more conventional
-+LZ77/LZ78-based compressors, and approaches the performance of the PPM
-+family of statistical compressors.
-+
-+The command-line options are deliberately very similar to those of GNU
-+@code{gzip}, but they are not identical.
-+
-+@code{bzip2} expects a list of file names to accompany the command-line
-+flags. Each file is replaced by a compressed version of itself, with
-+the name @code{original_name.bz2}. Each compressed file has the same
-+modification date, permissions, and, when possible, ownership as the
-+corresponding original, so that these properties can be correctly
-+restored at decompression time. File name handling is naive in the
-+sense that there is no mechanism for preserving original file names,
-+permissions, ownerships or dates in filesystems which lack these
-+concepts, or have serious file name length restrictions, such as MS-DOS.
-+
-+@code{bzip2} and @code{bunzip2} will by default not overwrite existing
-+files. If you want this to happen, specify the @code{-f} flag.
-+
-+If no file names are specified, @code{bzip2} compresses from standard
-+input to standard output. In this case, @code{bzip2} will decline to
-+write compressed output to a terminal, as this would be entirely
-+incomprehensible and therefore pointless.
-+
-+@code{bunzip2} (or @code{bzip2 -d}) decompresses all
-+specified files. Files which were not created by @code{bzip2}
-+will be detected and ignored, and a warning issued.
-+@code{bzip2} attempts to guess the filename for the decompressed file
-+from that of the compressed file as follows:
-+@itemize
-+@item @code{filename.bz2 } becomes @code{filename}
-+@item @code{filename.bz } becomes @code{filename}
-+@item @code{filename.tbz2} becomes @code{filename.tar}
-+@item @code{filename.tbz } becomes @code{filename.tar}
-+@item @code{anyothername } becomes @code{anyothername.out}
-+@end itemize
-+If the file does not end in one of the recognised endings,
-+@code{.bz2}, @code{.bz},
-+@code{.tbz2} or @code{.tbz}, @code{bzip2} complains that it cannot
-+guess the name of the original file, and uses the original name
-+with @code{.out} appended.
-+
-+As with compression, supplying no
-+filenames causes decompression from standard input to standard output.
-+
-+@code{bunzip2} will correctly decompress a file which is the
-+concatenation of two or more compressed files. The result is the
-+concatenation of the corresponding uncompressed files. Integrity
-+testing (@code{-t}) of concatenated compressed files is also supported.
-+
-+You can also compress or decompress files to the standard output by
-+giving the @code{-c} flag. Multiple files may be compressed and
-+decompressed like this. The resulting outputs are fed sequentially to
-+stdout. Compression of multiple files in this manner generates a stream
-+containing multiple compressed file representations. Such a stream
-+can be decompressed correctly only by @code{bzip2} version 0.9.0 or
-+later. Earlier versions of @code{bzip2} will stop after decompressing
-+the first file in the stream.
-+
-+@code{bzcat} (or @code{bzip2 -dc}) decompresses all specified files to
-+the standard output.
-+
-+@code{bzip2} will read arguments from the environment variables
-+@code{BZIP2} and @code{BZIP}, in that order, and will process them
-+before any arguments read from the command line. This gives a
-+convenient way to supply default arguments.
-+
-+Compression is always performed, even if the compressed file is slightly
-+larger than the original. Files of less than about one hundred bytes
-+tend to get larger, since the compression mechanism has a constant
-+overhead in the region of 50 bytes. Random data (including the output
-+of most file compressors) is coded at about 8.05 bits per byte, giving
-+an expansion of around 0.5%.
-+
-+As a self-check for your protection, @code{bzip2} uses 32-bit CRCs to
-+make sure that the decompressed version of a file is identical to the
-+original. This guards against corruption of the compressed data, and
-+against undetected bugs in @code{bzip2} (hopefully very unlikely). The
-+chances of data corruption going undetected is microscopic, about one
-+chance in four billion for each file processed. Be aware, though, that
-+the check occurs upon decompression, so it can only tell you that
-+something is wrong. It can't help you recover the original uncompressed
-+data. You can use @code{bzip2recover} to try to recover data from
-+damaged files.
-+
-+Return values: 0 for a normal exit, 1 for environmental problems (file
-+not found, invalid flags, I/O errors, &c), 2 to indicate a corrupt
-+compressed file, 3 for an internal consistency error (eg, bug) which
-+caused @code{bzip2} to panic.
-+
-+
-+@unnumberedsubsubsec OPTIONS
-+@table @code
-+@item -c --stdout
-+Compress or decompress to standard output.
-+@item -d --decompress
-+Force decompression. @code{bzip2}, @code{bunzip2} and @code{bzcat} are
-+really the same program, and the decision about what actions to take is
-+done on the basis of which name is used. This flag overrides that
-+mechanism, and forces bzip2 to decompress.
-+@item -z --compress
-+The complement to @code{-d}: forces compression, regardless of the
-+invokation name.
-+@item -t --test
-+Check integrity of the specified file(s), but don't decompress them.
-+This really performs a trial decompression and throws away the result.
-+@item -f --force
-+Force overwrite of output files. Normally, @code{bzip2} will not overwrite
-+existing output files. Also forces @code{bzip2} to break hard links
-+to files, which it otherwise wouldn't do.
-+
-+@code{bzip2} normally declines to decompress files which don't have the
-+correct magic header bytes. If forced (@code{-f}), however, it will
-+pass such files through unmodified. This is how GNU @code{gzip}
-+behaves.
-+@item -k --keep
-+Keep (don't delete) input files during compression
-+or decompression.
-+@item -s --small
-+Reduce memory usage, for compression, decompression and testing. Files
-+are decompressed and tested using a modified algorithm which only
-+requires 2.5 bytes per block byte. This means any file can be
-+decompressed in 2300k of memory, albeit at about half the normal speed.
-+
-+During compression, @code{-s} selects a block size of 200k, which limits
-+memory use to around the same figure, at the expense of your compression
-+ratio. In short, if your machine is low on memory (8 megabytes or
-+less), use -s for everything. See MEMORY MANAGEMENT below.
-+@item -q --quiet
-+Suppress non-essential warning messages. Messages pertaining to
-+I/O errors and other critical events will not be suppressed.
-+@item -v --verbose
-+Verbose mode -- show the compression ratio for each file processed.
-+Further @code{-v}'s increase the verbosity level, spewing out lots of
-+information which is primarily of interest for diagnostic purposes.
-+@item -L --license -V --version
-+Display the software version, license terms and conditions.
-+@item -1 (or --fast) to -9 (or --best)
-+Set the block size to 100 k, 200 k .. 900 k when compressing. Has no
-+effect when decompressing. See MEMORY MANAGEMENT below.
-+The @code{--fast} and @code{--best} aliases are primarily for GNU
-+@code{gzip} compatibility. In particular, @code{--fast} doesn't make
-+things significantly faster. And @code{--best} merely selects the
-+default behaviour.
-+@item --
-+Treats all subsequent arguments as file names, even if they start
-+with a dash. This is so you can handle files with names beginning
-+with a dash, for example: @code{bzip2 -- -myfilename}.
-+@item --repetitive-fast
-+@item --repetitive-best
-+These flags are redundant in versions 0.9.5 and above. They provided
-+some coarse control over the behaviour of the sorting algorithm in
-+earlier versions, which was sometimes useful. 0.9.5 and above have an
-+improved algorithm which renders these flags irrelevant.
-+@end table
-+
-+
-+@unnumberedsubsubsec MEMORY MANAGEMENT
-+
-+@code{bzip2} compresses large files in blocks. The block size affects
-+both the compression ratio achieved, and the amount of memory needed for
-+compression and decompression. The flags @code{-1} through @code{-9}
-+specify the block size to be 100,000 bytes through 900,000 bytes (the
-+default) respectively. At decompression time, the block size used for
-+compression is read from the header of the compressed file, and
-+@code{bunzip2} then allocates itself just enough memory to decompress
-+the file. Since block sizes are stored in compressed files, it follows
-+that the flags @code{-1} to @code{-9} are irrelevant to and so ignored
-+during decompression.
-+
-+Compression and decompression requirements, in bytes, can be estimated
-+as:
-+@example
-+ Compression: 400k + ( 8 x block size )
-+
-+ Decompression: 100k + ( 4 x block size ), or
-+ 100k + ( 2.5 x block size )
-+@end example
-+Larger block sizes give rapidly diminishing marginal returns. Most of
-+the compression comes from the first two or three hundred k of block
-+size, a fact worth bearing in mind when using @code{bzip2} on small machines.
-+It is also important to appreciate that the decompression memory
-+requirement is set at compression time by the choice of block size.
-+
-+For files compressed with the default 900k block size, @code{bunzip2}
-+will require about 3700 kbytes to decompress. To support decompression
-+of any file on a 4 megabyte machine, @code{bunzip2} has an option to
-+decompress using approximately half this amount of memory, about 2300
-+kbytes. Decompression speed is also halved, so you should use this
-+option only where necessary. The relevant flag is @code{-s}.
-+
-+In general, try and use the largest block size memory constraints allow,
-+since that maximises the compression achieved. Compression and
-+decompression speed are virtually unaffected by block size.
-+
-+Another significant point applies to files which fit in a single block
-+-- that means most files you'd encounter using a large block size. The
-+amount of real memory touched is proportional to the size of the file,
-+since the file is smaller than a block. For example, compressing a file
-+20,000 bytes long with the flag @code{-9} will cause the compressor to
-+allocate around 7600k of memory, but only touch 400k + 20000 * 8 = 560
-+kbytes of it. Similarly, the decompressor will allocate 3700k but only
-+touch 100k + 20000 * 4 = 180 kbytes.
-+
-+Here is a table which summarises the maximum memory usage for different
-+block sizes. Also recorded is the total compressed size for 14 files of
-+the Calgary Text Compression Corpus totalling 3,141,622 bytes. This
-+column gives some feel for how compression varies with block size.
-+These figures tend to understate the advantage of larger block sizes for
-+larger files, since the Corpus is dominated by smaller files.
-+@example
-+ Compress Decompress Decompress Corpus
-+ Flag usage usage -s usage Size
-+
-+ -1 1200k 500k 350k 914704
-+ -2 2000k 900k 600k 877703
-+ -3 2800k 1300k 850k 860338
-+ -4 3600k 1700k 1100k 846899
-+ -5 4400k 2100k 1350k 845160
-+ -6 5200k 2500k 1600k 838626
-+ -7 6100k 2900k 1850k 834096
-+ -8 6800k 3300k 2100k 828642
-+ -9 7600k 3700k 2350k 828642
-+@end example
-+
-+@unnumberedsubsubsec RECOVERING DATA FROM DAMAGED FILES
-+
-+@code{bzip2} compresses files in blocks, usually 900kbytes long. Each
-+block is handled independently. If a media or transmission error causes
-+a multi-block @code{.bz2} file to become damaged, it may be possible to
-+recover data from the undamaged blocks in the file.
-+
-+The compressed representation of each block is delimited by a 48-bit
-+pattern, which makes it possible to find the block boundaries with
-+reasonable certainty. Each block also carries its own 32-bit CRC, so
-+damaged blocks can be distinguished from undamaged ones.
-+
-+@code{bzip2recover} is a simple program whose purpose is to search for
-+blocks in @code{.bz2} files, and write each block out into its own
-+@code{.bz2} file. You can then use @code{bzip2 -t} to test the
-+integrity of the resulting files, and decompress those which are
-+undamaged.
-+
-+@code{bzip2recover}
-+takes a single argument, the name of the damaged file, and writes a
-+number of files @code{rec00001file.bz2}, @code{rec00002file.bz2}, etc,
-+containing the extracted blocks. The output filenames are designed so
-+that the use of wildcards in subsequent processing -- for example,
-+@code{bzip2 -dc rec*file.bz2 > recovered_data} -- processes the files in
-+the correct order.
-+
-+@code{bzip2recover} should be of most use dealing with large @code{.bz2}
-+files, as these will contain many blocks. It is clearly futile to use
-+it on damaged single-block files, since a damaged block cannot be
-+recovered. If you wish to minimise any potential data loss through
-+media or transmission errors, you might consider compressing with a
-+smaller block size.
-+
-+
-+@unnumberedsubsubsec PERFORMANCE NOTES
-+
-+The sorting phase of compression gathers together similar strings in the
-+file. Because of this, files containing very long runs of repeated
-+symbols, like "aabaabaabaab ..." (repeated several hundred times) may
-+compress more slowly than normal. Versions 0.9.5 and above fare much
-+better than previous versions in this respect. The ratio between
-+worst-case and average-case compression time is in the region of 10:1.
-+For previous versions, this figure was more like 100:1. You can use the
-+@code{-vvvv} option to monitor progress in great detail, if you want.
-+
-+Decompression speed is unaffected by these phenomena.
-+
-+@code{bzip2} usually allocates several megabytes of memory to operate
-+in, and then charges all over it in a fairly random fashion. This means
-+that performance, both for compressing and decompressing, is largely
-+determined by the speed at which your machine can service cache misses.
-+Because of this, small changes to the code to reduce the miss rate have
-+been observed to give disproportionately large performance improvements.
-+I imagine @code{bzip2} will perform best on machines with very large
-+caches.
-+
-+
-+@unnumberedsubsubsec CAVEATS
-+
-+I/O error messages are not as helpful as they could be. @code{bzip2}
-+tries hard to detect I/O errors and exit cleanly, but the details of
-+what the problem is sometimes seem rather misleading.
-+
-+This manual page pertains to version 1.0.2 of @code{bzip2}. Compressed
-+data created by this version is entirely forwards and backwards
-+compatible with the previous public releases, versions 0.1pl2, 0.9.0,
-+0.9.5, 1.0.0 and 1.0.1, but with the following exception: 0.9.0 and
-+above can correctly decompress multiple concatenated compressed files.
-+0.1pl2 cannot do this; it will stop after decompressing just the first
-+file in the stream.
-+
-+@code{bzip2recover} versions prior to this one, 1.0.2, used 32-bit
-+integers to represent bit positions in compressed files, so it could not
-+handle compressed files more than 512 megabytes long. Version 1.0.2 and
-+above uses 64-bit ints on some platforms which support them (GNU
-+supported targets, and Windows). To establish whether or not
-+@code{bzip2recover} was built with such a limitation, run it without
-+arguments. In any event you can build yourself an unlimited version if
-+you can recompile it with @code{MaybeUInt64} set to be an unsigned
-+64-bit integer.
-+
-+
-+
-+@unnumberedsubsubsec AUTHOR
-+Julian Seward, @code{jseward@@acm.org}.
-+
-+@code{http://sources.redhat.com/bzip2}
-+
-+The ideas embodied in @code{bzip2} are due to (at least) the following
-+people: Michael Burrows and David Wheeler (for the block sorting
-+transformation), David Wheeler (again, for the Huffman coder), Peter
-+Fenwick (for the structured coding model in the original @code{bzip},
-+and many refinements), and Alistair Moffat, Radford Neal and Ian Witten
-+(for the arithmetic coder in the original @code{bzip}). I am much
-+indebted for their help, support and advice. See the manual in the
-+source distribution for pointers to sources of documentation. Christian
-+von Roques encouraged me to look for faster sorting algorithms, so as to
-+speed up compression. Bela Lubkin encouraged me to improve the
-+worst-case compression performance. The @code{bz*} scripts are derived
-+from those of GNU @code{gzip}. Many people sent patches, helped with
-+portability problems, lent machines, gave advice and were generally
-+helpful.
-+
-+@end quotation
-+
-+
-+
-+
-+@chapter Programming with @code{libbzip2}
-+
-+This chapter describes the programming interface to @code{libbzip2}.
-+
-+For general background information, particularly about memory
-+use and performance aspects, you'd be well advised to read Chapter 2
-+as well.
-+
-+@section Top-level structure
-+
-+@code{libbzip2} is a flexible library for compressing and decompressing
-+data in the @code{bzip2} data format. Although packaged as a single
-+entity, it helps to regard the library as three separate parts: the low
-+level interface, and the high level interface, and some utility
-+functions.
-+
-+The structure of @code{libbzip2}'s interfaces is similar to
-+that of Jean-loup Gailly's and Mark Adler's excellent @code{zlib}
-+library.
-+
-+All externally visible symbols have names beginning @code{BZ2_}.
-+This is new in version 1.0. The intention is to minimise pollution
-+of the namespaces of library clients.
-+
-+@subsection Low-level summary
-+
-+This interface provides services for compressing and decompressing
-+data in memory. There's no provision for dealing with files, streams
-+or any other I/O mechanisms, just straight memory-to-memory work.
-+In fact, this part of the library can be compiled without inclusion
-+of @code{stdio.h}, which may be helpful for embedded applications.
-+
-+The low-level part of the library has no global variables and
-+is therefore thread-safe.
-+
-+Six routines make up the low level interface:
-+@code{BZ2_bzCompressInit}, @code{BZ2_bzCompress}, and @* @code{BZ2_bzCompressEnd}
-+for compression,
-+and a corresponding trio @code{BZ2_bzDecompressInit}, @* @code{BZ2_bzDecompress}
-+and @code{BZ2_bzDecompressEnd} for decompression.
-+The @code{*Init} functions allocate
-+memory for compression/decompression and do other
-+initialisations, whilst the @code{*End} functions close down operations
-+and release memory.
-+
-+The real work is done by @code{BZ2_bzCompress} and @code{BZ2_bzDecompress}.
-+These compress and decompress data from a user-supplied input buffer
-+to a user-supplied output buffer. These buffers can be any size;
-+arbitrary quantities of data are handled by making repeated calls
-+to these functions. This is a flexible mechanism allowing a
-+consumer-pull style of activity, or producer-push, or a mixture of
-+both.
-+
-+
-+
-+@subsection High-level summary
-+
-+This interface provides some handy wrappers around the low-level
-+interface to facilitate reading and writing @code{bzip2} format
-+files (@code{.bz2} files). The routines provide hooks to facilitate
-+reading files in which the @code{bzip2} data stream is embedded
-+within some larger-scale file structure, or where there are
-+multiple @code{bzip2} data streams concatenated end-to-end.
-+
-+For reading files, @code{BZ2_bzReadOpen}, @code{BZ2_bzRead},
-+@code{BZ2_bzReadClose} and @* @code{BZ2_bzReadGetUnused} are supplied. For
-+writing files, @code{BZ2_bzWriteOpen}, @code{BZ2_bzWrite} and
-+@code{BZ2_bzWriteFinish} are available.
-+
-+As with the low-level library, no global variables are used
-+so the library is per se thread-safe. However, if I/O errors
-+occur whilst reading or writing the underlying compressed files,
-+you may have to consult @code{errno} to determine the cause of
-+the error. In that case, you'd need a C library which correctly
-+supports @code{errno} in a multithreaded environment.
-+
-+To make the library a little simpler and more portable,
-+@code{BZ2_bzReadOpen} and @code{BZ2_bzWriteOpen} require you to pass them file
-+handles (@code{FILE*}s) which have previously been opened for reading or
-+writing respectively. That avoids portability problems associated with
-+file operations and file attributes, whilst not being much of an
-+imposition on the programmer.
-+
-+
-+
-+@subsection Utility functions summary
-+For very simple needs, @code{BZ2_bzBuffToBuffCompress} and
-+@code{BZ2_bzBuffToBuffDecompress} are provided. These compress
-+data in memory from one buffer to another buffer in a single
-+function call. You should assess whether these functions
-+fulfill your memory-to-memory compression/decompression
-+requirements before investing effort in understanding the more
-+general but more complex low-level interface.
-+
-+Yoshioka Tsuneo (@code{QWF00133@@niftyserve.or.jp} /
-+@code{tsuneo-y@@is.aist-nara.ac.jp}) has contributed some functions to
-+give better @code{zlib} compatibility. These functions are
-+@code{BZ2_bzopen}, @code{BZ2_bzread}, @code{BZ2_bzwrite}, @code{BZ2_bzflush},
-+@code{BZ2_bzclose},
-+@code{BZ2_bzerror} and @code{BZ2_bzlibVersion}. You may find these functions
-+more convenient for simple file reading and writing, than those in the
-+high-level interface. These functions are not (yet) officially part of
-+the library, and are minimally documented here. If they break, you
-+get to keep all the pieces. I hope to document them properly when time
-+permits.
-+
-+Yoshioka also contributed modifications to allow the library to be
-+built as a Windows DLL.
-+
-+
-+@section Error handling
-+
-+The library is designed to recover cleanly in all situations, including
-+the worst-case situation of decompressing random data. I'm not
-+100% sure that it can always do this, so you might want to add
-+a signal handler to catch segmentation violations during decompression
-+if you are feeling especially paranoid. I would be interested in
-+hearing more about the robustness of the library to corrupted
-+compressed data.
-+
-+Version 1.0 is much more robust in this respect than
-+0.9.0 or 0.9.5. Investigations with Checker (a tool for
-+detecting problems with memory management, similar to Purify)
-+indicate that, at least for the few files I tested, all single-bit
-+errors in the decompressed data are caught properly, with no
-+segmentation faults, no reads of uninitialised data and no
-+out of range reads or writes. So it's certainly much improved,
-+although I wouldn't claim it to be totally bombproof.
-+
-+The file @code{bzlib.h} contains all definitions needed to use
-+the library. In particular, you should definitely not include
-+@code{bzlib_private.h}.
-+
-+In @code{bzlib.h}, the various return values are defined. The following
-+list is not intended as an exhaustive description of the circumstances
-+in which a given value may be returned -- those descriptions are given
-+later. Rather, it is intended to convey the rough meaning of each
-+return value. The first five actions are normal and not intended to
-+denote an error situation.
-+@table @code
-+@item BZ_OK
-+The requested action was completed successfully.
-+@item BZ_RUN_OK
-+@itemx BZ_FLUSH_OK
-+@itemx BZ_FINISH_OK
-+In @code{BZ2_bzCompress}, the requested flush/finish/nothing-special action
-+was completed successfully.
-+@item BZ_STREAM_END
-+Compression of data was completed, or the logical stream end was
-+detected during decompression.
-+@end table
-+
-+The following return values indicate an error of some kind.
-+@table @code
-+@item BZ_CONFIG_ERROR
-+Indicates that the library has been improperly compiled on your
-+platform -- a major configuration error. Specifically, it means
-+that @code{sizeof(char)}, @code{sizeof(short)} and @code{sizeof(int)}
-+are not 1, 2 and 4 respectively, as they should be. Note that the
-+library should still work properly on 64-bit platforms which follow
-+the LP64 programming model -- that is, where @code{sizeof(long)}
-+and @code{sizeof(void*)} are 8. Under LP64, @code{sizeof(int)} is
-+still 4, so @code{libbzip2}, which doesn't use the @code{long} type,
-+is OK.
-+@item BZ_SEQUENCE_ERROR
-+When using the library, it is important to call the functions in the
-+correct sequence and with data structures (buffers etc) in the correct
-+states. @code{libbzip2} checks as much as it can to ensure this is
-+happening, and returns @code{BZ_SEQUENCE_ERROR} if not. Code which
-+complies precisely with the function semantics, as detailed below,
-+should never receive this value; such an event denotes buggy code
-+which you should investigate.
-+@item BZ_PARAM_ERROR
-+Returned when a parameter to a function call is out of range
-+or otherwise manifestly incorrect. As with @code{BZ_SEQUENCE_ERROR},
-+this denotes a bug in the client code. The distinction between
-+@code{BZ_PARAM_ERROR} and @code{BZ_SEQUENCE_ERROR} is a bit hazy, but still worth
-+making.
-+@item BZ_MEM_ERROR
-+Returned when a request to allocate memory failed. Note that the
-+quantity of memory needed to decompress a stream cannot be determined
-+until the stream's header has been read. So @code{BZ2_bzDecompress} and
-+@code{BZ2_bzRead} may return @code{BZ_MEM_ERROR} even though some of
-+the compressed data has been read. The same is not true for
-+compression; once @code{BZ2_bzCompressInit} or @code{BZ2_bzWriteOpen} have
-+successfully completed, @code{BZ_MEM_ERROR} cannot occur.
-+@item BZ_DATA_ERROR
-+Returned when a data integrity error is detected during decompression.
-+Most importantly, this means when stored and computed CRCs for the
-+data do not match. This value is also returned upon detection of any
-+other anomaly in the compressed data.
-+@item BZ_DATA_ERROR_MAGIC
-+As a special case of @code{BZ_DATA_ERROR}, it is sometimes useful to
-+know when the compressed stream does not start with the correct
-+magic bytes (@code{'B' 'Z' 'h'}).
-+@item BZ_IO_ERROR
-+Returned by @code{BZ2_bzRead} and @code{BZ2_bzWrite} when there is an error
-+reading or writing in the compressed file, and by @code{BZ2_bzReadOpen}
-+and @code{BZ2_bzWriteOpen} for attempts to use a file for which the
-+error indicator (viz, @code{ferror(f)}) is set.
-+On receipt of @code{BZ_IO_ERROR}, the caller should consult
-+@code{errno} and/or @code{perror} to acquire operating-system
-+specific information about the problem.
-+@item BZ_UNEXPECTED_EOF
-+Returned by @code{BZ2_bzRead} when the compressed file finishes
-+before the logical end of stream is detected.
-+@item BZ_OUTBUFF_FULL
-+Returned by @code{BZ2_bzBuffToBuffCompress} and
-+@code{BZ2_bzBuffToBuffDecompress} to indicate that the output data
-+will not fit into the output buffer provided.
-+@end table
-+
-+
-+
-+@section Low-level interface
-+
-+@subsection @code{BZ2_bzCompressInit}
-+@example
-+typedef
-+ struct @{
-+ char *next_in;
-+ unsigned int avail_in;
-+ unsigned int total_in_lo32;
-+ unsigned int total_in_hi32;
-+
-+ char *next_out;
-+ unsigned int avail_out;
-+ unsigned int total_out_lo32;
-+ unsigned int total_out_hi32;
-+
-+ void *state;
-+
-+ void *(*bzalloc)(void *,int,int);
-+ void (*bzfree)(void *,void *);
-+ void *opaque;
-+ @}
-+ bz_stream;
-+
-+int BZ2_bzCompressInit ( bz_stream *strm,
-+ int blockSize100k,
-+ int verbosity,
-+ int workFactor );
-+
-+@end example
-+
-+Prepares for compression. The @code{bz_stream} structure
-+holds all data pertaining to the compression activity.
-+A @code{bz_stream} structure should be allocated and initialised
-+prior to the call.
-+The fields of @code{bz_stream}
-+comprise the entirety of the user-visible data. @code{state}
-+is a pointer to the private data structures required for compression.
-+
-+Custom memory allocators are supported, via fields @code{bzalloc},
-+@code{bzfree},
-+and @code{opaque}. The value
-+@code{opaque} is passed to as the first argument to
-+all calls to @code{bzalloc} and @code{bzfree}, but is
-+otherwise ignored by the library.
-+The call @code{bzalloc ( opaque, n, m )} is expected to return a
-+pointer @code{p} to
-+@code{n * m} bytes of memory, and @code{bzfree ( opaque, p )}
-+should free
-+that memory.
-+
-+If you don't want to use a custom memory allocator, set @code{bzalloc},
-+@code{bzfree} and
-+@code{opaque} to @code{NULL},
-+and the library will then use the standard @code{malloc}/@code{free}
-+routines.
-+
-+Before calling @code{BZ2_bzCompressInit}, fields @code{bzalloc},
-+@code{bzfree} and @code{opaque} should
-+be filled appropriately, as just described. Upon return, the internal
-+state will have been allocated and initialised, and @code{total_in_lo32},
-+@code{total_in_hi32}, @code{total_out_lo32} and
-+@code{total_out_hi32} will have been set to zero.
-+These four fields are used by the library
-+to inform the caller of the total amount of data passed into and out of
-+the library, respectively. You should not try to change them.
-+As of version 1.0, 64-bit counts are maintained, even on 32-bit
-+platforms, using the @code{_hi32} fields to store the upper 32 bits
-+of the count. So, for example, the total amount of data in
-+is @code{(total_in_hi32 << 32) + total_in_lo32}.
-+
-+Parameter @code{blockSize100k} specifies the block size to be used for
-+compression. It should be a value between 1 and 9 inclusive, and the
-+actual block size used is 100000 x this figure. 9 gives the best
-+compression but takes most memory.
-+
-+Parameter @code{verbosity} should be set to a number between 0 and 4
-+inclusive. 0 is silent, and greater numbers give increasingly verbose
-+monitoring/debugging output. If the library has been compiled with
-+@code{-DBZ_NO_STDIO}, no such output will appear for any verbosity
-+setting.
-+
-+Parameter @code{workFactor} controls how the compression phase behaves
-+when presented with worst case, highly repetitive, input data. If
-+compression runs into difficulties caused by repetitive data, the
-+library switches from the standard sorting algorithm to a fallback
-+algorithm. The fallback is slower than the standard algorithm by
-+perhaps a factor of three, but always behaves reasonably, no matter how
-+bad the input.
-+
-+Lower values of @code{workFactor} reduce the amount of effort the
-+standard algorithm will expend before resorting to the fallback. You
-+should set this parameter carefully; too low, and many inputs will be
-+handled by the fallback algorithm and so compress rather slowly, too
-+high, and your average-to-worst case compression times can become very
-+large. The default value of 30 gives reasonable behaviour over a wide
-+range of circumstances.
-+
-+Allowable values range from 0 to 250 inclusive. 0 is a special case,
-+equivalent to using the default value of 30.
-+
-+Note that the compressed output generated is the same regardless of
-+whether or not the fallback algorithm is used.
-+
-+Be aware also that this parameter may disappear entirely in future
-+versions of the library. In principle it should be possible to devise a
-+good way to automatically choose which algorithm to use. Such a
-+mechanism would render the parameter obsolete.
-+
-+Possible return values:
-+@display
-+ @code{BZ_CONFIG_ERROR}
-+ if the library has been mis-compiled
-+ @code{BZ_PARAM_ERROR}
-+ if @code{strm} is @code{NULL}
-+ or @code{blockSize} < 1 or @code{blockSize} > 9
-+ or @code{verbosity} < 0 or @code{verbosity} > 4
-+ or @code{workFactor} < 0 or @code{workFactor} > 250
-+ @code{BZ_MEM_ERROR}
-+ if not enough memory is available
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+Allowable next actions:
-+@display
-+ @code{BZ2_bzCompress}
-+ if @code{BZ_OK} is returned
-+ no specific action needed in case of error
-+@end display
-+
-+@subsection @code{BZ2_bzCompress}
-+@example
-+ int BZ2_bzCompress ( bz_stream *strm, int action );
-+@end example
-+Provides more input and/or output buffer space for the library. The
-+caller maintains input and output buffers, and calls @code{BZ2_bzCompress} to
-+transfer data between them.
-+
-+Before each call to @code{BZ2_bzCompress}, @code{next_in} should point at
-+the data to be compressed, and @code{avail_in} should indicate how many
-+bytes the library may read. @code{BZ2_bzCompress} updates @code{next_in},
-+@code{avail_in} and @code{total_in} to reflect the number of bytes it
-+has read.
-+
-+Similarly, @code{next_out} should point to a buffer in which the
-+compressed data is to be placed, with @code{avail_out} indicating how
-+much output space is available. @code{BZ2_bzCompress} updates
-+@code{next_out}, @code{avail_out} and @code{total_out} to reflect the
-+number of bytes output.
-+
-+You may provide and remove as little or as much data as you like on each
-+call of @code{BZ2_bzCompress}. In the limit, it is acceptable to supply and
-+remove data one byte at a time, although this would be terribly
-+inefficient. You should always ensure that at least one byte of output
-+space is available at each call.
-+
-+A second purpose of @code{BZ2_bzCompress} is to request a change of mode of the
-+compressed stream.
-+
-+Conceptually, a compressed stream can be in one of four states: IDLE,
-+RUNNING, FLUSHING and FINISHING. Before initialisation
-+(@code{BZ2_bzCompressInit}) and after termination (@code{BZ2_bzCompressEnd}), a
-+stream is regarded as IDLE.
-+
-+Upon initialisation (@code{BZ2_bzCompressInit}), the stream is placed in the
-+RUNNING state. Subsequent calls to @code{BZ2_bzCompress} should pass
-+@code{BZ_RUN} as the requested action; other actions are illegal and
-+will result in @code{BZ_SEQUENCE_ERROR}.
-+
-+At some point, the calling program will have provided all the input data
-+it wants to. It will then want to finish up -- in effect, asking the
-+library to process any data it might have buffered internally. In this
-+state, @code{BZ2_bzCompress} will no longer attempt to read data from
-+@code{next_in}, but it will want to write data to @code{next_out}.
-+Because the output buffer supplied by the user can be arbitrarily small,
-+the finishing-up operation cannot necessarily be done with a single call
-+of @code{BZ2_bzCompress}.
-+
-+Instead, the calling program passes @code{BZ_FINISH} as an action to
-+@code{BZ2_bzCompress}. This changes the stream's state to FINISHING. Any
-+remaining input (ie, @code{next_in[0 .. avail_in-1]}) is compressed and
-+transferred to the output buffer. To do this, @code{BZ2_bzCompress} must be
-+called repeatedly until all the output has been consumed. At that
-+point, @code{BZ2_bzCompress} returns @code{BZ_STREAM_END}, and the stream's
-+state is set back to IDLE. @code{BZ2_bzCompressEnd} should then be
-+called.
-+
-+Just to make sure the calling program does not cheat, the library makes
-+a note of @code{avail_in} at the time of the first call to
-+@code{BZ2_bzCompress} which has @code{BZ_FINISH} as an action (ie, at the
-+time the program has announced its intention to not supply any more
-+input). By comparing this value with that of @code{avail_in} over
-+subsequent calls to @code{BZ2_bzCompress}, the library can detect any
-+attempts to slip in more data to compress. Any calls for which this is
-+detected will return @code{BZ_SEQUENCE_ERROR}. This indicates a
-+programming mistake which should be corrected.
-+
-+Instead of asking to finish, the calling program may ask
-+@code{BZ2_bzCompress} to take all the remaining input, compress it and
-+terminate the current (Burrows-Wheeler) compression block. This could
-+be useful for error control purposes. The mechanism is analogous to
-+that for finishing: call @code{BZ2_bzCompress} with an action of
-+@code{BZ_FLUSH}, remove output data, and persist with the
-+@code{BZ_FLUSH} action until the value @code{BZ_RUN} is returned. As
-+with finishing, @code{BZ2_bzCompress} detects any attempt to provide more
-+input data once the flush has begun.
-+
-+Once the flush is complete, the stream returns to the normal RUNNING
-+state.
-+
-+This all sounds pretty complex, but isn't really. Here's a table
-+which shows which actions are allowable in each state, what action
-+will be taken, what the next state is, and what the non-error return
-+values are. Note that you can't explicitly ask what state the
-+stream is in, but nor do you need to -- it can be inferred from the
-+values returned by @code{BZ2_bzCompress}.
-+@display
-+IDLE/@code{any}
-+ Illegal. IDLE state only exists after @code{BZ2_bzCompressEnd} or
-+ before @code{BZ2_bzCompressInit}.
-+ Return value = @code{BZ_SEQUENCE_ERROR}
-+
-+RUNNING/@code{BZ_RUN}
-+ Compress from @code{next_in} to @code{next_out} as much as possible.
-+ Next state = RUNNING
-+ Return value = @code{BZ_RUN_OK}
-+
-+RUNNING/@code{BZ_FLUSH}
-+ Remember current value of @code{next_in}. Compress from @code{next_in}
-+ to @code{next_out} as much as possible, but do not accept any more input.
-+ Next state = FLUSHING
-+ Return value = @code{BZ_FLUSH_OK}
-+
-+RUNNING/@code{BZ_FINISH}
-+ Remember current value of @code{next_in}. Compress from @code{next_in}
-+ to @code{next_out} as much as possible, but do not accept any more input.
-+ Next state = FINISHING
-+ Return value = @code{BZ_FINISH_OK}
-+
-+FLUSHING/@code{BZ_FLUSH}
-+ Compress from @code{next_in} to @code{next_out} as much as possible,
-+ but do not accept any more input.
-+ If all the existing input has been used up and all compressed
-+ output has been removed
-+ Next state = RUNNING; Return value = @code{BZ_RUN_OK}
-+ else
-+ Next state = FLUSHING; Return value = @code{BZ_FLUSH_OK}
-+
-+FLUSHING/other
-+ Illegal.
-+ Return value = @code{BZ_SEQUENCE_ERROR}
-+
-+FINISHING/@code{BZ_FINISH}
-+ Compress from @code{next_in} to @code{next_out} as much as possible,
-+ but to not accept any more input.
-+ If all the existing input has been used up and all compressed
-+ output has been removed
-+ Next state = IDLE; Return value = @code{BZ_STREAM_END}
-+ else
-+ Next state = FINISHING; Return value = @code{BZ_FINISHING}
-+
-+FINISHING/other
-+ Illegal.
-+ Return value = @code{BZ_SEQUENCE_ERROR}
-+@end display
-+
-+That still looks complicated? Well, fair enough. The usual sequence
-+of calls for compressing a load of data is:
-+@itemize @bullet
-+@item Get started with @code{BZ2_bzCompressInit}.
-+@item Shovel data in and shlurp out its compressed form using zero or more
-+calls of @code{BZ2_bzCompress} with action = @code{BZ_RUN}.
-+@item Finish up.
-+Repeatedly call @code{BZ2_bzCompress} with action = @code{BZ_FINISH},
-+copying out the compressed output, until @code{BZ_STREAM_END} is returned.
-+@item Close up and go home. Call @code{BZ2_bzCompressEnd}.
-+@end itemize
-+If the data you want to compress fits into your input buffer all
-+at once, you can skip the calls of @code{BZ2_bzCompress ( ..., BZ_RUN )} and
-+just do the @code{BZ2_bzCompress ( ..., BZ_FINISH )} calls.
-+
-+All required memory is allocated by @code{BZ2_bzCompressInit}. The
-+compression library can accept any data at all (obviously). So you
-+shouldn't get any error return values from the @code{BZ2_bzCompress} calls.
-+If you do, they will be @code{BZ_SEQUENCE_ERROR}, and indicate a bug in
-+your programming.
-+
-+Trivial other possible return values:
-+@display
-+ @code{BZ_PARAM_ERROR}
-+ if @code{strm} is @code{NULL}, or @code{strm->s} is @code{NULL}
-+@end display
-+
-+@subsection @code{BZ2_bzCompressEnd}
-+@example
-+int BZ2_bzCompressEnd ( bz_stream *strm );
-+@end example
-+Releases all memory associated with a compression stream.
-+
-+Possible return values:
-+@display
-+ @code{BZ_PARAM_ERROR} if @code{strm} is @code{NULL} or @code{strm->s} is @code{NULL}
-+ @code{BZ_OK} otherwise
-+@end display
-+
-+
-+@subsection @code{BZ2_bzDecompressInit}
-+@example
-+int BZ2_bzDecompressInit ( bz_stream *strm, int verbosity, int small );
-+@end example
-+Prepares for decompression. As with @code{BZ2_bzCompressInit}, a
-+@code{bz_stream} record should be allocated and initialised before the
-+call. Fields @code{bzalloc}, @code{bzfree} and @code{opaque} should be
-+set if a custom memory allocator is required, or made @code{NULL} for
-+the normal @code{malloc}/@code{free} routines. Upon return, the internal
-+state will have been initialised, and @code{total_in} and
-+@code{total_out} will be zero.
-+
-+For the meaning of parameter @code{verbosity}, see @code{BZ2_bzCompressInit}.
-+
-+If @code{small} is nonzero, the library will use an alternative
-+decompression algorithm which uses less memory but at the cost of
-+decompressing more slowly (roughly speaking, half the speed, but the
-+maximum memory requirement drops to around 2300k). See Chapter 2 for
-+more information on memory management.
-+
-+Note that the amount of memory needed to decompress
-+a stream cannot be determined until the stream's header has been read,
-+so even if @code{BZ2_bzDecompressInit} succeeds, a subsequent
-+@code{BZ2_bzDecompress} could fail with @code{BZ_MEM_ERROR}.
-+
-+Possible return values:
-+@display
-+ @code{BZ_CONFIG_ERROR}
-+ if the library has been mis-compiled
-+ @code{BZ_PARAM_ERROR}
-+ if @code{(small != 0 && small != 1)}
-+ or @code{(verbosity < 0 || verbosity > 4)}
-+ @code{BZ_MEM_ERROR}
-+ if insufficient memory is available
-+@end display
-+
-+Allowable next actions:
-+@display
-+ @code{BZ2_bzDecompress}
-+ if @code{BZ_OK} was returned
-+ no specific action required in case of error
-+@end display
-+
-+
-+
-+@subsection @code{BZ2_bzDecompress}
-+@example
-+int BZ2_bzDecompress ( bz_stream *strm );
-+@end example
-+Provides more input and/out output buffer space for the library. The
-+caller maintains input and output buffers, and uses @code{BZ2_bzDecompress}
-+to transfer data between them.
-+
-+Before each call to @code{BZ2_bzDecompress}, @code{next_in}
-+should point at the compressed data,
-+and @code{avail_in} should indicate how many bytes the library
-+may read. @code{BZ2_bzDecompress} updates @code{next_in}, @code{avail_in}
-+and @code{total_in}
-+to reflect the number of bytes it has read.
-+
-+Similarly, @code{next_out} should point to a buffer in which the uncompressed
-+output is to be placed, with @code{avail_out} indicating how much output space
-+is available. @code{BZ2_bzCompress} updates @code{next_out},
-+@code{avail_out} and @code{total_out} to reflect
-+the number of bytes output.
-+
-+You may provide and remove as little or as much data as you like on
-+each call of @code{BZ2_bzDecompress}.
-+In the limit, it is acceptable to
-+supply and remove data one byte at a time, although this would be
-+terribly inefficient. You should always ensure that at least one
-+byte of output space is available at each call.
-+
-+Use of @code{BZ2_bzDecompress} is simpler than @code{BZ2_bzCompress}.
-+
-+You should provide input and remove output as described above, and
-+repeatedly call @code{BZ2_bzDecompress} until @code{BZ_STREAM_END} is
-+returned. Appearance of @code{BZ_STREAM_END} denotes that
-+@code{BZ2_bzDecompress} has detected the logical end of the compressed
-+stream. @code{BZ2_bzDecompress} will not produce @code{BZ_STREAM_END} until
-+all output data has been placed into the output buffer, so once
-+@code{BZ_STREAM_END} appears, you are guaranteed to have available all
-+the decompressed output, and @code{BZ2_bzDecompressEnd} can safely be
-+called.
-+
-+If case of an error return value, you should call @code{BZ2_bzDecompressEnd}
-+to clean up and release memory.
-+
-+Possible return values:
-+@display
-+ @code{BZ_PARAM_ERROR}
-+ if @code{strm} is @code{NULL} or @code{strm->s} is @code{NULL}
-+ or @code{strm->avail_out < 1}
-+ @code{BZ_DATA_ERROR}
-+ if a data integrity error is detected in the compressed stream
-+ @code{BZ_DATA_ERROR_MAGIC}
-+ if the compressed stream doesn't begin with the right magic bytes
-+ @code{BZ_MEM_ERROR}
-+ if there wasn't enough memory available
-+ @code{BZ_STREAM_END}
-+ if the logical end of the data stream was detected and all
-+ output in has been consumed, eg @code{s->avail_out > 0}
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+Allowable next actions:
-+@display
-+ @code{BZ2_bzDecompress}
-+ if @code{BZ_OK} was returned
-+ @code{BZ2_bzDecompressEnd}
-+ otherwise
-+@end display
-+
-+
-+@subsection @code{BZ2_bzDecompressEnd}
-+@example
-+int BZ2_bzDecompressEnd ( bz_stream *strm );
-+@end example
-+Releases all memory associated with a decompression stream.
-+
-+Possible return values:
-+@display
-+ @code{BZ_PARAM_ERROR}
-+ if @code{strm} is @code{NULL} or @code{strm->s} is @code{NULL}
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+
-+Allowable next actions:
-+@display
-+ None.
-+@end display
-+
-+
-+@section High-level interface
-+
-+This interface provides functions for reading and writing
-+@code{bzip2} format files. First, some general points.
-+
-+@itemize @bullet
-+@item All of the functions take an @code{int*} first argument,
-+ @code{bzerror}.
-+ After each call, @code{bzerror} should be consulted first to determine
-+ the outcome of the call. If @code{bzerror} is @code{BZ_OK},
-+ the call completed
-+ successfully, and only then should the return value of the function
-+ (if any) be consulted. If @code{bzerror} is @code{BZ_IO_ERROR},
-+ there was an error
-+ reading/writing the underlying compressed file, and you should
-+ then consult @code{errno}/@code{perror} to determine the
-+ cause of the difficulty.
-+ @code{bzerror} may also be set to various other values; precise details are
-+ given on a per-function basis below.
-+@item If @code{bzerror} indicates an error
-+ (ie, anything except @code{BZ_OK} and @code{BZ_STREAM_END}),
-+ you should immediately call @code{BZ2_bzReadClose} (or @code{BZ2_bzWriteClose},
-+ depending on whether you are attempting to read or to write)
-+ to free up all resources associated
-+ with the stream. Once an error has been indicated, behaviour of all calls
-+ except @code{BZ2_bzReadClose} (@code{BZ2_bzWriteClose}) is undefined.
-+ The implication is that (1) @code{bzerror} should
-+ be checked after each call, and (2) if @code{bzerror} indicates an error,
-+ @code{BZ2_bzReadClose} (@code{BZ2_bzWriteClose}) should then be called to clean up.
-+@item The @code{FILE*} arguments passed to
-+ @code{BZ2_bzReadOpen}/@code{BZ2_bzWriteOpen}
-+ should be set to binary mode.
-+ Most Unix systems will do this by default, but other platforms,
-+ including Windows and Mac, will not. If you omit this, you may
-+ encounter problems when moving code to new platforms.
-+@item Memory allocation requests are handled by
-+ @code{malloc}/@code{free}.
-+ At present
-+ there is no facility for user-defined memory allocators in the file I/O
-+ functions (could easily be added, though).
-+@end itemize
-+
-+
-+
-+@subsection @code{BZ2_bzReadOpen}
-+@example
-+ typedef void BZFILE;
-+
-+ BZFILE *BZ2_bzReadOpen ( int *bzerror, FILE *f,
-+ int small, int verbosity,
-+ void *unused, int nUnused );
-+@end example
-+Prepare to read compressed data from file handle @code{f}. @code{f}
-+should refer to a file which has been opened for reading, and for which
-+the error indicator (@code{ferror(f)})is not set. If @code{small} is 1,
-+the library will try to decompress using less memory, at the expense of
-+speed.
-+
-+For reasons explained below, @code{BZ2_bzRead} will decompress the
-+@code{nUnused} bytes starting at @code{unused}, before starting to read
-+from the file @code{f}. At most @code{BZ_MAX_UNUSED} bytes may be
-+supplied like this. If this facility is not required, you should pass
-+@code{NULL} and @code{0} for @code{unused} and n@code{Unused}
-+respectively.
-+
-+For the meaning of parameters @code{small} and @code{verbosity},
-+see @code{BZ2_bzDecompressInit}.
-+
-+The amount of memory needed to decompress a file cannot be determined
-+until the file's header has been read. So it is possible that
-+@code{BZ2_bzReadOpen} returns @code{BZ_OK} but a subsequent call of
-+@code{BZ2_bzRead} will return @code{BZ_MEM_ERROR}.
-+
-+Possible assignments to @code{bzerror}:
-+@display
-+ @code{BZ_CONFIG_ERROR}
-+ if the library has been mis-compiled
-+ @code{BZ_PARAM_ERROR}
-+ if @code{f} is @code{NULL}
-+ or @code{small} is neither @code{0} nor @code{1}
-+ or @code{(unused == NULL && nUnused != 0)}
-+ or @code{(unused != NULL && !(0 <= nUnused <= BZ_MAX_UNUSED))}
-+ @code{BZ_IO_ERROR}
-+ if @code{ferror(f)} is nonzero
-+ @code{BZ_MEM_ERROR}
-+ if insufficient memory is available
-+ @code{BZ_OK}
-+ otherwise.
-+@end display
-+
-+Possible return values:
-+@display
-+ Pointer to an abstract @code{BZFILE}
-+ if @code{bzerror} is @code{BZ_OK}
-+ @code{NULL}
-+ otherwise
-+@end display
-+
-+Allowable next actions:
-+@display
-+ @code{BZ2_bzRead}
-+ if @code{bzerror} is @code{BZ_OK}
-+ @code{BZ2_bzClose}
-+ otherwise
-+@end display
-+
-+
-+@subsection @code{BZ2_bzRead}
-+@example
-+ int BZ2_bzRead ( int *bzerror, BZFILE *b, void *buf, int len );
-+@end example
-+Reads up to @code{len} (uncompressed) bytes from the compressed file
-+@code{b} into
-+the buffer @code{buf}. If the read was successful,
-+@code{bzerror} is set to @code{BZ_OK}
-+and the number of bytes read is returned. If the logical end-of-stream
-+was detected, @code{bzerror} will be set to @code{BZ_STREAM_END},
-+and the number
-+of bytes read is returned. All other @code{bzerror} values denote an error.
-+
-+@code{BZ2_bzRead} will supply @code{len} bytes,
-+unless the logical stream end is detected
-+or an error occurs. Because of this, it is possible to detect the
-+stream end by observing when the number of bytes returned is
-+less than the number
-+requested. Nevertheless, this is regarded as inadvisable; you should
-+instead check @code{bzerror} after every call and watch out for
-+@code{BZ_STREAM_END}.
-+
-+Internally, @code{BZ2_bzRead} copies data from the compressed file in chunks
-+of size @code{BZ_MAX_UNUSED} bytes
-+before decompressing it. If the file contains more bytes than strictly
-+needed to reach the logical end-of-stream, @code{BZ2_bzRead} will almost certainly
-+read some of the trailing data before signalling @code{BZ_SEQUENCE_END}.
-+To collect the read but unused data once @code{BZ_SEQUENCE_END} has
-+appeared, call @code{BZ2_bzReadGetUnused} immediately before @code{BZ2_bzReadClose}.
-+
-+Possible assignments to @code{bzerror}:
-+@display
-+ @code{BZ_PARAM_ERROR}
-+ if @code{b} is @code{NULL} or @code{buf} is @code{NULL} or @code{len < 0}
-+ @code{BZ_SEQUENCE_ERROR}
-+ if @code{b} was opened with @code{BZ2_bzWriteOpen}
-+ @code{BZ_IO_ERROR}
-+ if there is an error reading from the compressed file
-+ @code{BZ_UNEXPECTED_EOF}
-+ if the compressed file ended before the logical end-of-stream was detected
-+ @code{BZ_DATA_ERROR}
-+ if a data integrity error was detected in the compressed stream
-+ @code{BZ_DATA_ERROR_MAGIC}
-+ if the stream does not begin with the requisite header bytes (ie, is not
-+ a @code{bzip2} data file). This is really a special case of @code{BZ_DATA_ERROR}.
-+ @code{BZ_MEM_ERROR}
-+ if insufficient memory was available
-+ @code{BZ_STREAM_END}
-+ if the logical end of stream was detected.
-+ @code{BZ_OK}
-+ otherwise.
-+@end display
-+
-+Possible return values:
-+@display
-+ number of bytes read
-+ if @code{bzerror} is @code{BZ_OK} or @code{BZ_STREAM_END}
-+ undefined
-+ otherwise
-+@end display
-+
-+Allowable next actions:
-+@display
-+ collect data from @code{buf}, then @code{BZ2_bzRead} or @code{BZ2_bzReadClose}
-+ if @code{bzerror} is @code{BZ_OK}
-+ collect data from @code{buf}, then @code{BZ2_bzReadClose} or @code{BZ2_bzReadGetUnused}
-+ if @code{bzerror} is @code{BZ_SEQUENCE_END}
-+ @code{BZ2_bzReadClose}
-+ otherwise
-+@end display
-+
-+
-+
-+@subsection @code{BZ2_bzReadGetUnused}
-+@example
-+ void BZ2_bzReadGetUnused ( int* bzerror, BZFILE *b,
-+ void** unused, int* nUnused );
-+@end example
-+Returns data which was read from the compressed file but was not needed
-+to get to the logical end-of-stream. @code{*unused} is set to the address
-+of the data, and @code{*nUnused} to the number of bytes. @code{*nUnused} will
-+be set to a value between @code{0} and @code{BZ_MAX_UNUSED} inclusive.
-+
-+This function may only be called once @code{BZ2_bzRead} has signalled
-+@code{BZ_STREAM_END} but before @code{BZ2_bzReadClose}.
-+
-+Possible assignments to @code{bzerror}:
-+@display
-+ @code{BZ_PARAM_ERROR}
-+ if @code{b} is @code{NULL}
-+ or @code{unused} is @code{NULL} or @code{nUnused} is @code{NULL}
-+ @code{BZ_SEQUENCE_ERROR}
-+ if @code{BZ_STREAM_END} has not been signalled
-+ or if @code{b} was opened with @code{BZ2_bzWriteOpen}
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+
-+Allowable next actions:
-+@display
-+ @code{BZ2_bzReadClose}
-+@end display
-+
-+
-+@subsection @code{BZ2_bzReadClose}
-+@example
-+ void BZ2_bzReadClose ( int *bzerror, BZFILE *b );
-+@end example
-+Releases all memory pertaining to the compressed file @code{b}.
-+@code{BZ2_bzReadClose} does not call @code{fclose} on the underlying file
-+handle, so you should do that yourself if appropriate.
-+@code{BZ2_bzReadClose} should be called to clean up after all error
-+situations.
-+
-+Possible assignments to @code{bzerror}:
-+@display
-+ @code{BZ_SEQUENCE_ERROR}
-+ if @code{b} was opened with @code{BZ2_bzOpenWrite}
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+
-+Allowable next actions:
-+@display
-+ none
-+@end display
-+
-+
-+
-+@subsection @code{BZ2_bzWriteOpen}
-+@example
-+ BZFILE *BZ2_bzWriteOpen ( int *bzerror, FILE *f,
-+ int blockSize100k, int verbosity,
-+ int workFactor );
-+@end example
-+Prepare to write compressed data to file handle @code{f}.
-+@code{f} should refer to
-+a file which has been opened for writing, and for which the error
-+indicator (@code{ferror(f)})is not set.
-+
-+For the meaning of parameters @code{blockSize100k},
-+@code{verbosity} and @code{workFactor}, see
-+@* @code{BZ2_bzCompressInit}.
-+
-+All required memory is allocated at this stage, so if the call
-+completes successfully, @code{BZ_MEM_ERROR} cannot be signalled by a
-+subsequent call to @code{BZ2_bzWrite}.
-+
-+Possible assignments to @code{bzerror}:
-+@display
-+ @code{BZ_CONFIG_ERROR}
-+ if the library has been mis-compiled
-+ @code{BZ_PARAM_ERROR}
-+ if @code{f} is @code{NULL}
-+ or @code{blockSize100k < 1} or @code{blockSize100k > 9}
-+ @code{BZ_IO_ERROR}
-+ if @code{ferror(f)} is nonzero
-+ @code{BZ_MEM_ERROR}
-+ if insufficient memory is available
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+
-+Possible return values:
-+@display
-+ Pointer to an abstract @code{BZFILE}
-+ if @code{bzerror} is @code{BZ_OK}
-+ @code{NULL}
-+ otherwise
-+@end display
-+
-+Allowable next actions:
-+@display
-+ @code{BZ2_bzWrite}
-+ if @code{bzerror} is @code{BZ_OK}
-+ (you could go directly to @code{BZ2_bzWriteClose}, but this would be pretty pointless)
-+ @code{BZ2_bzWriteClose}
-+ otherwise
-+@end display
-+
-+
-+
-+@subsection @code{BZ2_bzWrite}
-+@example
-+ void BZ2_bzWrite ( int *bzerror, BZFILE *b, void *buf, int len );
-+@end example
-+Absorbs @code{len} bytes from the buffer @code{buf}, eventually to be
-+compressed and written to the file.
-+
-+Possible assignments to @code{bzerror}:
-+@display
-+ @code{BZ_PARAM_ERROR}
-+ if @code{b} is @code{NULL} or @code{buf} is @code{NULL} or @code{len < 0}
-+ @code{BZ_SEQUENCE_ERROR}
-+ if b was opened with @code{BZ2_bzReadOpen}
-+ @code{BZ_IO_ERROR}
-+ if there is an error writing the compressed file.
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+
-+
-+
-+
-+@subsection @code{BZ2_bzWriteClose}
-+@example
-+ void BZ2_bzWriteClose ( int *bzerror, BZFILE* f,
-+ int abandon,
-+ unsigned int* nbytes_in,
-+ unsigned int* nbytes_out );
-+
-+ void BZ2_bzWriteClose64 ( int *bzerror, BZFILE* f,
-+ int abandon,
-+ unsigned int* nbytes_in_lo32,
-+ unsigned int* nbytes_in_hi32,
-+ unsigned int* nbytes_out_lo32,
-+ unsigned int* nbytes_out_hi32 );
-+@end example
-+
-+Compresses and flushes to the compressed file all data so far supplied
-+by @code{BZ2_bzWrite}. The logical end-of-stream markers are also written, so
-+subsequent calls to @code{BZ2_bzWrite} are illegal. All memory associated
-+with the compressed file @code{b} is released.
-+@code{fflush} is called on the
-+compressed file, but it is not @code{fclose}'d.
-+
-+If @code{BZ2_bzWriteClose} is called to clean up after an error, the only
-+action is to release the memory. The library records the error codes
-+issued by previous calls, so this situation will be detected
-+automatically. There is no attempt to complete the compression
-+operation, nor to @code{fflush} the compressed file. You can force this
-+behaviour to happen even in the case of no error, by passing a nonzero
-+value to @code{abandon}.
-+
-+If @code{nbytes_in} is non-null, @code{*nbytes_in} will be set to be the
-+total volume of uncompressed data handled. Similarly, @code{nbytes_out}
-+will be set to the total volume of compressed data written. For
-+compatibility with older versions of the library, @code{BZ2_bzWriteClose}
-+only yields the lower 32 bits of these counts. Use
-+@code{BZ2_bzWriteClose64} if you want the full 64 bit counts. These
-+two functions are otherwise absolutely identical.
-+
-+
-+Possible assignments to @code{bzerror}:
-+@display
-+ @code{BZ_SEQUENCE_ERROR}
-+ if @code{b} was opened with @code{BZ2_bzReadOpen}
-+ @code{BZ_IO_ERROR}
-+ if there is an error writing the compressed file
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+
-+@subsection Handling embedded compressed data streams
-+
-+The high-level library facilitates use of
-+@code{bzip2} data streams which form some part of a surrounding, larger
-+data stream.
-+@itemize @bullet
-+@item For writing, the library takes an open file handle, writes
-+compressed data to it, @code{fflush}es it but does not @code{fclose} it.
-+The calling application can write its own data before and after the
-+compressed data stream, using that same file handle.
-+@item Reading is more complex, and the facilities are not as general
-+as they could be since generality is hard to reconcile with efficiency.
-+@code{BZ2_bzRead} reads from the compressed file in blocks of size
-+@code{BZ_MAX_UNUSED} bytes, and in doing so probably will overshoot
-+the logical end of compressed stream.
-+To recover this data once decompression has
-+ended, call @code{BZ2_bzReadGetUnused} after the last call of @code{BZ2_bzRead}
-+(the one returning @code{BZ_STREAM_END}) but before calling
-+@code{BZ2_bzReadClose}.
-+@end itemize
-+
-+This mechanism makes it easy to decompress multiple @code{bzip2}
-+streams placed end-to-end. As the end of one stream, when @code{BZ2_bzRead}
-+returns @code{BZ_STREAM_END}, call @code{BZ2_bzReadGetUnused} to collect the
-+unused data (copy it into your own buffer somewhere).
-+That data forms the start of the next compressed stream.
-+To start uncompressing that next stream, call @code{BZ2_bzReadOpen} again,
-+feeding in the unused data via the @code{unused}/@code{nUnused}
-+parameters.
-+Keep doing this until @code{BZ_STREAM_END} return coincides with the
-+physical end of file (@code{feof(f)}). In this situation
-+@code{BZ2_bzReadGetUnused}
-+will of course return no data.
-+
-+This should give some feel for how the high-level interface can be used.
-+If you require extra flexibility, you'll have to bite the bullet and get
-+to grips with the low-level interface.
-+
-+@subsection Standard file-reading/writing code
-+Here's how you'd write data to a compressed file:
-+@example @code
-+FILE* f;
-+BZFILE* b;
-+int nBuf;
-+char buf[ /* whatever size you like */ ];
-+int bzerror;
-+int nWritten;
-+
-+f = fopen ( "myfile.bz2", "w" );
-+if (!f) @{
-+ /* handle error */
-+@}
-+b = BZ2_bzWriteOpen ( &bzerror, f, 9 );
-+if (bzerror != BZ_OK) @{
-+ BZ2_bzWriteClose ( b );
-+ /* handle error */
-+@}
-+
-+while ( /* condition */ ) @{
-+ /* get data to write into buf, and set nBuf appropriately */
-+ nWritten = BZ2_bzWrite ( &bzerror, b, buf, nBuf );
-+ if (bzerror == BZ_IO_ERROR) @{
-+ BZ2_bzWriteClose ( &bzerror, b );
-+ /* handle error */
-+ @}
-+@}
-+
-+BZ2_bzWriteClose ( &bzerror, b );
-+if (bzerror == BZ_IO_ERROR) @{
-+ /* handle error */
-+@}
-+@end example
-+And to read from a compressed file:
-+@example
-+FILE* f;
-+BZFILE* b;
-+int nBuf;
-+char buf[ /* whatever size you like */ ];
-+int bzerror;
-+int nWritten;
-+
-+f = fopen ( "myfile.bz2", "r" );
-+if (!f) @{
-+ /* handle error */
-+@}
-+b = BZ2_bzReadOpen ( &bzerror, f, 0, NULL, 0 );
-+if (bzerror != BZ_OK) @{
-+ BZ2_bzReadClose ( &bzerror, b );
-+ /* handle error */
-+@}
-+
-+bzerror = BZ_OK;
-+while (bzerror == BZ_OK && /* arbitrary other conditions */) @{
-+ nBuf = BZ2_bzRead ( &bzerror, b, buf, /* size of buf */ );
-+ if (bzerror == BZ_OK) @{
-+ /* do something with buf[0 .. nBuf-1] */
-+ @}
-+@}
-+if (bzerror != BZ_STREAM_END) @{
-+ BZ2_bzReadClose ( &bzerror, b );
-+ /* handle error */
-+@} else @{
-+ BZ2_bzReadClose ( &bzerror );
-+@}
-+@end example
-+
-+
-+
-+@section Utility functions
-+@subsection @code{BZ2_bzBuffToBuffCompress}
-+@example
-+ int BZ2_bzBuffToBuffCompress( char* dest,
-+ unsigned int* destLen,
-+ char* source,
-+ unsigned int sourceLen,
-+ int blockSize100k,
-+ int verbosity,
-+ int workFactor );
-+@end example
-+Attempts to compress the data in @code{source[0 .. sourceLen-1]}
-+into the destination buffer, @code{dest[0 .. *destLen-1]}.
-+If the destination buffer is big enough, @code{*destLen} is
-+set to the size of the compressed data, and @code{BZ_OK} is
-+returned. If the compressed data won't fit, @code{*destLen}
-+is unchanged, and @code{BZ_OUTBUFF_FULL} is returned.
-+
-+Compression in this manner is a one-shot event, done with a single call
-+to this function. The resulting compressed data is a complete
-+@code{bzip2} format data stream. There is no mechanism for making
-+additional calls to provide extra input data. If you want that kind of
-+mechanism, use the low-level interface.
-+
-+For the meaning of parameters @code{blockSize100k}, @code{verbosity}
-+and @code{workFactor}, @* see @code{BZ2_bzCompressInit}.
-+
-+To guarantee that the compressed data will fit in its buffer, allocate
-+an output buffer of size 1% larger than the uncompressed data, plus
-+six hundred extra bytes.
-+
-+@code{BZ2_bzBuffToBuffDecompress} will not write data at or
-+beyond @code{dest[*destLen]}, even in case of buffer overflow.
-+
-+Possible return values:
-+@display
-+ @code{BZ_CONFIG_ERROR}
-+ if the library has been mis-compiled
-+ @code{BZ_PARAM_ERROR}
-+ if @code{dest} is @code{NULL} or @code{destLen} is @code{NULL}
-+ or @code{blockSize100k < 1} or @code{blockSize100k > 9}
-+ or @code{verbosity < 0} or @code{verbosity > 4}
-+ or @code{workFactor < 0} or @code{workFactor > 250}
-+ @code{BZ_MEM_ERROR}
-+ if insufficient memory is available
-+ @code{BZ_OUTBUFF_FULL}
-+ if the size of the compressed data exceeds @code{*destLen}
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+
-+
-+
-+@subsection @code{BZ2_bzBuffToBuffDecompress}
-+@example
-+ int BZ2_bzBuffToBuffDecompress ( char* dest,
-+ unsigned int* destLen,
-+ char* source,
-+ unsigned int sourceLen,
-+ int small,
-+ int verbosity );
-+@end example
-+Attempts to decompress the data in @code{source[0 .. sourceLen-1]}
-+into the destination buffer, @code{dest[0 .. *destLen-1]}.
-+If the destination buffer is big enough, @code{*destLen} is
-+set to the size of the uncompressed data, and @code{BZ_OK} is
-+returned. If the compressed data won't fit, @code{*destLen}
-+is unchanged, and @code{BZ_OUTBUFF_FULL} is returned.
-+
-+@code{source} is assumed to hold a complete @code{bzip2} format
-+data stream. @* @code{BZ2_bzBuffToBuffDecompress} tries to decompress
-+the entirety of the stream into the output buffer.
-+
-+For the meaning of parameters @code{small} and @code{verbosity},
-+see @code{BZ2_bzDecompressInit}.
-+
-+Because the compression ratio of the compressed data cannot be known in
-+advance, there is no easy way to guarantee that the output buffer will
-+be big enough. You may of course make arrangements in your code to
-+record the size of the uncompressed data, but such a mechanism is beyond
-+the scope of this library.
-+
-+@code{BZ2_bzBuffToBuffDecompress} will not write data at or
-+beyond @code{dest[*destLen]}, even in case of buffer overflow.
-+
-+Possible return values:
-+@display
-+ @code{BZ_CONFIG_ERROR}
-+ if the library has been mis-compiled
-+ @code{BZ_PARAM_ERROR}
-+ if @code{dest} is @code{NULL} or @code{destLen} is @code{NULL}
-+ or @code{small != 0 && small != 1}
-+ or @code{verbosity < 0} or @code{verbosity > 4}
-+ @code{BZ_MEM_ERROR}
-+ if insufficient memory is available
-+ @code{BZ_OUTBUFF_FULL}
-+ if the size of the compressed data exceeds @code{*destLen}
-+ @code{BZ_DATA_ERROR}
-+ if a data integrity error was detected in the compressed data
-+ @code{BZ_DATA_ERROR_MAGIC}
-+ if the compressed data doesn't begin with the right magic bytes
-+ @code{BZ_UNEXPECTED_EOF}
-+ if the compressed data ends unexpectedly
-+ @code{BZ_OK}
-+ otherwise
-+@end display
-+
-+
-+
-+@section @code{zlib} compatibility functions
-+Yoshioka Tsuneo has contributed some functions to
-+give better @code{zlib} compatibility. These functions are
-+@code{BZ2_bzopen}, @code{BZ2_bzread}, @code{BZ2_bzwrite}, @code{BZ2_bzflush},
-+@code{BZ2_bzclose},
-+@code{BZ2_bzerror} and @code{BZ2_bzlibVersion}.
-+These functions are not (yet) officially part of
-+the library. If they break, you get to keep all the pieces.
-+Nevertheless, I think they work ok.
-+@example
-+typedef void BZFILE;
-+
-+const char * BZ2_bzlibVersion ( void );
-+@end example
-+Returns a string indicating the library version.
-+@example
-+BZFILE * BZ2_bzopen ( const char *path, const char *mode );
-+BZFILE * BZ2_bzdopen ( int fd, const char *mode );
-+@end example
-+Opens a @code{.bz2} file for reading or writing, using either its name
-+or a pre-existing file descriptor.
-+Analogous to @code{fopen} and @code{fdopen}.
-+@example
-+int BZ2_bzread ( BZFILE* b, void* buf, int len );
-+int BZ2_bzwrite ( BZFILE* b, void* buf, int len );
-+@end example
-+Reads/writes data from/to a previously opened @code{BZFILE}.
-+Analogous to @code{fread} and @code{fwrite}.
-+@example
-+int BZ2_bzflush ( BZFILE* b );
-+void BZ2_bzclose ( BZFILE* b );
-+@end example
-+Flushes/closes a @code{BZFILE}. @code{BZ2_bzflush} doesn't actually do
-+anything. Analogous to @code{fflush} and @code{fclose}.
-+
-+@example
-+const char * BZ2_bzerror ( BZFILE *b, int *errnum )
-+@end example
-+Returns a string describing the more recent error status of
-+@code{b}, and also sets @code{*errnum} to its numerical value.
-+
-+
-+@section Using the library in a @code{stdio}-free environment
-+
-+@subsection Getting rid of @code{stdio}
-+
-+In a deeply embedded application, you might want to use just
-+the memory-to-memory functions. You can do this conveniently
-+by compiling the library with preprocessor symbol @code{BZ_NO_STDIO}
-+defined. Doing this gives you a library containing only the following
-+eight functions:
-+
-+@code{BZ2_bzCompressInit}, @code{BZ2_bzCompress}, @code{BZ2_bzCompressEnd} @*
-+@code{BZ2_bzDecompressInit}, @code{BZ2_bzDecompress}, @code{BZ2_bzDecompressEnd} @*
-+@code{BZ2_bzBuffToBuffCompress}, @code{BZ2_bzBuffToBuffDecompress}
-+
-+When compiled like this, all functions will ignore @code{verbosity}
-+settings.
-+
-+@subsection Critical error handling
-+@code{libbzip2} contains a number of internal assertion checks which
-+should, needless to say, never be activated. Nevertheless, if an
-+assertion should fail, behaviour depends on whether or not the library
-+was compiled with @code{BZ_NO_STDIO} set.
-+
-+For a normal compile, an assertion failure yields the message
-+@example
-+ bzip2/libbzip2: internal error number N.
-+ This is a bug in bzip2/libbzip2, 1.0.2, 30-Dec-2001.
-+ Please report it to me at: jseward@@acm.org. If this happened
-+ when you were using some program which uses libbzip2 as a
-+ component, you should also report this bug to the author(s)
-+ of that program. Please make an effort to report this bug;
-+ timely and accurate bug reports eventually lead to higher
-+ quality software. Thanks. Julian Seward, 30 December 2001.
-+@end example
-+where @code{N} is some error code number. If @code{N == 1007}, it also
-+prints some extra text advising the reader that unreliable memory is
-+often associated with internal error 1007. (This is a
-+frequently-observed-phenomenon with versions 1.0.0/1.0.1).
-+
-+@code{exit(3)} is then called.
-+
-+For a @code{stdio}-free library, assertion failures result
-+in a call to a function declared as:
-+@example
-+ extern void bz_internal_error ( int errcode );
-+@end example
-+The relevant code is passed as a parameter. You should supply
-+such a function.
-+
-+In either case, once an assertion failure has occurred, any
-+@code{bz_stream} records involved can be regarded as invalid.
-+You should not attempt to resume normal operation with them.
-+
-+You may, of course, change critical error handling to suit
-+your needs. As I said above, critical errors indicate bugs
-+in the library and should not occur. All "normal" error
-+situations are indicated via error return codes from functions,
-+and can be recovered from.
-+
-+
-+@section Making a Windows DLL
-+Everything related to Windows has been contributed by Yoshioka Tsuneo
-+@* (@code{QWF00133@@niftyserve.or.jp} /
-+@code{tsuneo-y@@is.aist-nara.ac.jp}), so you should send your queries to
-+him (but perhaps Cc: me, @code{jseward@@acm.org}).
-+
-+My vague understanding of what to do is: using Visual C++ 5.0,
-+open the project file @code{libbz2.dsp}, and build. That's all.
-+
-+If you can't
-+open the project file for some reason, make a new one, naming these files:
-+@code{blocksort.c}, @code{bzlib.c}, @code{compress.c},
-+@code{crctable.c}, @code{decompress.c}, @code{huffman.c}, @*
-+@code{randtable.c} and @code{libbz2.def}. You will also need
-+to name the header files @code{bzlib.h} and @code{bzlib_private.h}.
-+
-+If you don't use VC++, you may need to define the proprocessor symbol
-+@code{_WIN32}.
-+
-+Finally, @code{dlltest.c} is a sample program using the DLL. It has a
-+project file, @code{dlltest.dsp}.
-+
-+If you just want a makefile for Visual C, have a look at
-+@code{makefile.msc}.
-+
-+Be aware that if you compile @code{bzip2} itself on Win32, you must set
-+@code{BZ_UNIX} to 0 and @code{BZ_LCCWIN32} to 1, in the file
-+@code{bzip2.c}, before compiling. Otherwise the resulting binary won't
-+work correctly.
-+
-+I haven't tried any of this stuff myself, but it all looks plausible.
-+
-+
-+
-+@chapter Miscellanea
-+
-+These are just some random thoughts of mine. Your mileage may
-+vary.
-+
-+@section Limitations of the compressed file format
-+@code{bzip2-1.0}, @code{0.9.5} and @code{0.9.0}
-+use exactly the same file format as the previous
-+version, @code{bzip2-0.1}. This decision was made in the interests of
-+stability. Creating yet another incompatible compressed file format
-+would create further confusion and disruption for users.
-+
-+Nevertheless, this is not a painless decision. Development
-+work since the release of @code{bzip2-0.1} in August 1997
-+has shown complexities in the file format which slow down
-+decompression and, in retrospect, are unnecessary. These are:
-+@itemize @bullet
-+@item The run-length encoder, which is the first of the
-+ compression transformations, is entirely irrelevant.
-+ The original purpose was to protect the sorting algorithm
-+ from the very worst case input: a string of repeated
-+ symbols. But algorithm steps Q6a and Q6b in the original
-+ Burrows-Wheeler technical report (SRC-124) show how
-+ repeats can be handled without difficulty in block
-+ sorting.
-+@item The randomisation mechanism doesn't really need to be
-+ there. Udi Manber and Gene Myers published a suffix
-+ array construction algorithm a few years back, which
-+ can be employed to sort any block, no matter how
-+ repetitive, in O(N log N) time. Subsequent work by
-+ Kunihiko Sadakane has produced a derivative O(N (log N)^2)
-+ algorithm which usually outperforms the Manber-Myers
-+ algorithm.
-+
-+ I could have changed to Sadakane's algorithm, but I find
-+ it to be slower than @code{bzip2}'s existing algorithm for
-+ most inputs, and the randomisation mechanism protects
-+ adequately against bad cases. I didn't think it was
-+ a good tradeoff to make. Partly this is due to the fact
-+ that I was not flooded with email complaints about
-+ @code{bzip2-0.1}'s performance on repetitive data, so
-+ perhaps it isn't a problem for real inputs.
-+
-+ Probably the best long-term solution,
-+ and the one I have incorporated into 0.9.5 and above,
-+ is to use the existing sorting
-+ algorithm initially, and fall back to a O(N (log N)^2)
-+ algorithm if the standard algorithm gets into difficulties.
-+@item The compressed file format was never designed to be
-+ handled by a library, and I have had to jump though
-+ some hoops to produce an efficient implementation of
-+ decompression. It's a bit hairy. Try passing
-+ @code{decompress.c} through the C preprocessor
-+ and you'll see what I mean. Much of this complexity
-+ could have been avoided if the compressed size of
-+ each block of data was recorded in the data stream.
-+@item An Adler-32 checksum, rather than a CRC32 checksum,
-+ would be faster to compute.
-+@end itemize
-+It would be fair to say that the @code{bzip2} format was frozen
-+before I properly and fully understood the performance
-+consequences of doing so.
-+
-+Improvements which I was able to incorporate into
-+0.9.0, despite using the same file format, are:
-+@itemize @bullet
-+@item Single array implementation of the inverse BWT. This
-+ significantly speeds up decompression, presumably
-+ because it reduces the number of cache misses.
-+@item Faster inverse MTF transform for large MTF values. The
-+ new implementation is based on the notion of sliding blocks
-+ of values.
-+@item @code{bzip2-0.9.0} now reads and writes files with @code{fread}
-+ and @code{fwrite}; version 0.1 used @code{putc} and @code{getc}.
-+ Duh! Well, you live and learn.
-+
-+@end itemize
-+Further ahead, it would be nice
-+to be able to do random access into files. This will
-+require some careful design of compressed file formats.
-+
-+
-+
-+@section Portability issues
-+After some consideration, I have decided not to use
-+GNU @code{autoconf} to configure 0.9.5 or 1.0.
-+
-+@code{autoconf}, admirable and wonderful though it is,
-+mainly assists with portability problems between Unix-like
-+platforms. But @code{bzip2} doesn't have much in the way
-+of portability problems on Unix; most of the difficulties appear
-+when porting to the Mac, or to Microsoft's operating systems.
-+@code{autoconf} doesn't help in those cases, and brings in a
-+whole load of new complexity.
-+
-+Most people should be able to compile the library and program
-+under Unix straight out-of-the-box, so to speak, especially
-+if you have a version of GNU C available.
-+
-+There are a couple of @code{__inline__} directives in the code. GNU C
-+(@code{gcc}) should be able to handle them. If you're not using
-+GNU C, your C compiler shouldn't see them at all.
-+If your compiler does, for some reason, see them and doesn't
-+like them, just @code{#define} @code{__inline__} to be @code{/* */}. One
-+easy way to do this is to compile with the flag @code{-D__inline__=},
-+which should be understood by most Unix compilers.
-+
-+If you still have difficulties, try compiling with the macro
-+@code{BZ_STRICT_ANSI} defined. This should enable you to build the
-+library in a strictly ANSI compliant environment. Building the program
-+itself like this is dangerous and not supported, since you remove
-+@code{bzip2}'s checks against compressing directories, symbolic links,
-+devices, and other not-really-a-file entities. This could cause
-+filesystem corruption!
-+
-+One other thing: if you create a @code{bzip2} binary for public
-+distribution, please try and link it statically (@code{gcc -s}). This
-+avoids all sorts of library-version issues that others may encounter
-+later on.
-+
-+If you build @code{bzip2} on Win32, you must set @code{BZ_UNIX} to 0 and
-+@code{BZ_LCCWIN32} to 1, in the file @code{bzip2.c}, before compiling.
-+Otherwise the resulting binary won't work correctly.
-+
-+
-+
-+@section Reporting bugs
-+I tried pretty hard to make sure @code{bzip2} is
-+bug free, both by design and by testing. Hopefully
-+you'll never need to read this section for real.
-+
-+Nevertheless, if @code{bzip2} dies with a segmentation
-+fault, a bus error or an internal assertion failure, it
-+will ask you to email me a bug report. Experience with
-+version 0.1 shows that almost all these problems can
-+be traced to either compiler bugs or hardware problems.
-+@itemize @bullet
-+@item
-+Recompile the program with no optimisation, and see if it
-+works. And/or try a different compiler.
-+I heard all sorts of stories about various flavours
-+of GNU C (and other compilers) generating bad code for
-+@code{bzip2}, and I've run across two such examples myself.
-+
-+2.7.X versions of GNU C are known to generate bad code from
-+time to time, at high optimisation levels.
-+If you get problems, try using the flags
-+@code{-O2} @code{-fomit-frame-pointer} @code{-fno-strength-reduce}.
-+You should specifically @emph{not} use @code{-funroll-loops}.
-+
-+You may notice that the Makefile runs six tests as part of
-+the build process. If the program passes all of these, it's
-+a pretty good (but not 100%) indication that the compiler has
-+done its job correctly.
-+@item
-+If @code{bzip2} crashes randomly, and the crashes are not
-+repeatable, you may have a flaky memory subsystem. @code{bzip2}
-+really hammers your memory hierarchy, and if it's a bit marginal,
-+you may get these problems. Ditto if your disk or I/O subsystem
-+is slowly failing. Yup, this really does happen.
-+
-+Try using a different machine of the same type, and see if
-+you can repeat the problem.
-+@item This isn't really a bug, but ... If @code{bzip2} tells
-+you your file is corrupted on decompression, and you
-+obtained the file via FTP, there is a possibility that you
-+forgot to tell FTP to do a binary mode transfer. That absolutely
-+will cause the file to be non-decompressible. You'll have to transfer
-+it again.
-+@end itemize
-+
-+If you've incorporated @code{libbzip2} into your own program
-+and are getting problems, please, please, please, check that the
-+parameters you are passing in calls to the library, are
-+correct, and in accordance with what the documentation says
-+is allowable. I have tried to make the library robust against
-+such problems, but I'm sure I haven't succeeded.
-+
-+Finally, if the above comments don't help, you'll have to send
-+me a bug report. Now, it's just amazing how many people will
-+send me a bug report saying something like
-+@display
-+ bzip2 crashed with segmentation fault on my machine
-+@end display
-+and absolutely nothing else. Needless to say, a such a report
-+is @emph{totally, utterly, completely and comprehensively 100% useless;
-+a waste of your time, my time, and net bandwidth}.
-+With no details at all, there's no way I can possibly begin
-+to figure out what the problem is.
-+
-+The rules of the game are: facts, facts, facts. Don't omit
-+them because "oh, they won't be relevant". At the bare
-+minimum:
-+@display
-+ Machine type. Operating system version.
-+ Exact version of @code{bzip2} (do @code{bzip2 -V}).
-+ Exact version of the compiler used.
-+ Flags passed to the compiler.
-+@end display
-+However, the most important single thing that will help me is
-+the file that you were trying to compress or decompress at the
-+time the problem happened. Without that, my ability to do anything
-+more than speculate about the cause, is limited.
-+
-+Please remember that I connect to the Internet with a modem, so
-+you should contact me before mailing me huge files.
-+
-+
-+@section Did you get the right package?
-+
-+@code{bzip2} is a resource hog. It soaks up large amounts of CPU cycles
-+and memory. Also, it gives very large latencies. In the worst case, you
-+can feed many megabytes of uncompressed data into the library before
-+getting any compressed output, so this probably rules out applications
-+requiring interactive behaviour.
-+
-+These aren't faults of my implementation, I hope, but more
-+an intrinsic property of the Burrows-Wheeler transform (unfortunately).
-+Maybe this isn't what you want.
-+
-+If you want a compressor and/or library which is faster, uses less
-+memory but gets pretty good compression, and has minimal latency,
-+consider Jean-loup
-+Gailly's and Mark Adler's work, @code{zlib-1.1.3} and
-+@code{gzip-1.2.4}. Look for them at
-+
-+@code{http://www.zlib.org} and
-+@code{http://www.gzip.org} respectively.
-+
-+For something faster and lighter still, you might try Markus F X J
-+Oberhumer's @code{LZO} real-time compression/decompression library, at
-+@* @code{http://wildsau.idv.uni-linz.ac.at/mfx/lzo.html}.
-+
-+If you want to use the @code{bzip2} algorithms to compress small blocks
-+of data, 64k bytes or smaller, for example on an on-the-fly disk
-+compressor, you'd be well advised not to use this library. Instead,
-+I've made a special library tuned for that kind of use. It's part of
-+@code{e2compr-0.40}, an on-the-fly disk compressor for the Linux
-+@code{ext2} filesystem. Look at
-+@code{http://www.netspace.net.au/~reiter/e2compr}.
-+
-+
-+
-+@section Testing
-+
-+A record of the tests I've done.
-+
-+First, some data sets:
-+@itemize @bullet
-+@item B: a directory containing 6001 files, one for every length in the
-+ range 0 to 6000 bytes. The files contain random lowercase
-+ letters. 18.7 megabytes.
-+@item H: my home directory tree. Documents, source code, mail files,
-+ compressed data. H contains B, and also a directory of
-+ files designed as boundary cases for the sorting; mostly very
-+ repetitive, nasty files. 565 megabytes.
-+@item A: directory tree holding various applications built from source:
-+ @code{egcs}, @code{gcc-2.8.1}, KDE, GTK, Octave, etc.
-+ 2200 megabytes.
-+@end itemize
-+The tests conducted are as follows. Each test means compressing
-+(a copy of) each file in the data set, decompressing it and
-+comparing it against the original.
-+
-+First, a bunch of tests with block sizes and internal buffer
-+sizes set very small,
-+to detect any problems with the
-+blocking and buffering mechanisms.
-+This required modifying the source code so as to try to
-+break it.
-+@enumerate
-+@item Data set H, with
-+ buffer size of 1 byte, and block size of 23 bytes.
-+@item Data set B, buffer sizes 1 byte, block size 1 byte.
-+@item As (2) but small-mode decompression.
-+@item As (2) with block size 2 bytes.
-+@item As (2) with block size 3 bytes.
-+@item As (2) with block size 4 bytes.
-+@item As (2) with block size 5 bytes.
-+@item As (2) with block size 6 bytes and small-mode decompression.
-+@item H with buffer size of 1 byte, but normal block
-+ size (up to 900000 bytes).
-+@end enumerate
-+Then some tests with unmodified source code.
-+@enumerate
-+@item H, all settings normal.
-+@item As (1), with small-mode decompress.
-+@item H, compress with flag @code{-1}.
-+@item H, compress with flag @code{-s}, decompress with flag @code{-s}.
-+@item Forwards compatibility: H, @code{bzip2-0.1pl2} compressing,
-+ @code{bzip2-0.9.5} decompressing, all settings normal.
-+@item Backwards compatibility: H, @code{bzip2-0.9.5} compressing,
-+ @code{bzip2-0.1pl2} decompressing, all settings normal.
-+@item Bigger tests: A, all settings normal.
-+@item As (7), using the fallback (Sadakane-like) sorting algorithm.
-+@item As (8), compress with flag @code{-1}, decompress with flag
-+ @code{-s}.
-+@item H, using the fallback sorting algorithm.
-+@item Forwards compatibility: A, @code{bzip2-0.1pl2} compressing,
-+ @code{bzip2-0.9.5} decompressing, all settings normal.
-+@item Backwards compatibility: A, @code{bzip2-0.9.5} compressing,
-+ @code{bzip2-0.1pl2} decompressing, all settings normal.
-+@item Misc test: about 400 megabytes of @code{.tar} files with
-+ @code{bzip2} compiled with Checker (a memory access error
-+ detector, like Purify).
-+@item Misc tests to make sure it builds and runs ok on non-Linux/x86
-+ platforms.
-+@end enumerate
-+These tests were conducted on a 225 MHz IDT WinChip machine, running
-+Linux 2.0.36. They represent nearly a week of continuous computation.
-+All tests completed successfully.
-+
-+
-+@section Further reading
-+@code{bzip2} is not research work, in the sense that it doesn't present
-+any new ideas. Rather, it's an engineering exercise based on existing
-+ideas.
-+
-+Four documents describe essentially all the ideas behind @code{bzip2}:
-+@example
-+Michael Burrows and D. J. Wheeler:
-+ "A block-sorting lossless data compression algorithm"
-+ 10th May 1994.
-+ Digital SRC Research Report 124.
-+ ftp://ftp.digital.com/pub/DEC/SRC/research-reports/SRC-124.ps.gz
-+ If you have trouble finding it, try searching at the
-+ New Zealand Digital Library, http://www.nzdl.org.
-+
-+Daniel S. Hirschberg and Debra A. LeLewer
-+ "Efficient Decoding of Prefix Codes"
-+ Communications of the ACM, April 1990, Vol 33, Number 4.
-+ You might be able to get an electronic copy of this
-+ from the ACM Digital Library.
-+
-+David J. Wheeler
-+ Program bred3.c and accompanying document bred3.ps.
-+ This contains the idea behind the multi-table Huffman
-+ coding scheme.
-+ ftp://ftp.cl.cam.ac.uk/users/djw3/
-+
-+Jon L. Bentley and Robert Sedgewick
-+ "Fast Algorithms for Sorting and Searching Strings"
-+ Available from Sedgewick's web page,
-+ www.cs.princeton.edu/~rs
-+@end example
-+The following paper gives valuable additional insights into the
-+algorithm, but is not immediately the basis of any code
-+used in bzip2.
-+@example
-+Peter Fenwick:
-+ Block Sorting Text Compression
-+ Proceedings of the 19th Australasian Computer Science Conference,
-+ Melbourne, Australia. Jan 31 - Feb 2, 1996.
-+ ftp://ftp.cs.auckland.ac.nz/pub/peter-f/ACSC96paper.ps
-+@end example
-+Kunihiko Sadakane's sorting algorithm, mentioned above,
-+is available from:
-+@example
-+http://naomi.is.s.u-tokyo.ac.jp/~sada/papers/Sada98b.ps.gz
-+@end example
-+The Manber-Myers suffix array construction
-+algorithm is described in a paper
-+available from:
-+@example
-+http://www.cs.arizona.edu/people/gene/PAPERS/suffix.ps
-+@end example
-+Finally, the following paper documents some recent investigations
-+I made into the performance of sorting algorithms:
-+@example
-+Julian Seward:
-+ On the Performance of BWT Sorting Algorithms
-+ Proceedings of the IEEE Data Compression Conference 2000
-+ Snowbird, Utah. 28-30 March 2000.
-+@end example
-+
-+
-+@contents
-+
-+@bye
-+
-diff -Nru bzip2-1.0.2/doc/bzip2recover.1 bzip2-1.0.2.new/doc/bzip2recover.1
---- bzip2-1.0.2/doc/bzip2recover.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/bzip2recover.1 Fri Feb 1 04:19:11 2002
-@@ -0,0 +1 @@
-+.so bzip2.1
-\ No newline at end of file
-diff -Nru bzip2-1.0.2/doc/bzmore.1 bzip2-1.0.2.new/doc/bzmore.1
---- bzip2-1.0.2/doc/bzmore.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/bzmore.1 Sun Dec 30 03:12:35 2001
-@@ -0,0 +1,152 @@
-+.\"Shamelessly copied from zmore.1 by Philippe Troin <phil@fifi.org>
-+.\"for Debian GNU/Linux
-+.TH BZMORE 1
-+.SH NAME
-+bzmore, bzless \- file perusal filter for crt viewing of bzip2 compressed text
-+.SH SYNOPSIS
-+.B bzmore
-+[ name ... ]
-+.br
-+.B bzless
-+[ name ... ]
-+.SH NOTE
-+In the following description,
-+.I bzless
-+and
-+.I less
-+can be used interchangeably with
-+.I bzmore
-+and
-+.I more.
-+.SH DESCRIPTION
-+.I Bzmore
-+is a filter which allows examination of compressed or plain text files
-+one screenful at a time on a soft-copy terminal.
-+.I bzmore
-+works on files compressed with
-+.I bzip2
-+and also on uncompressed files.
-+If a file does not exist,
-+.I bzmore
-+looks for a file of the same name with the addition of a .bz2 suffix.
-+.PP
-+.I Bzmore
-+normally pauses after each screenful, printing --More--
-+at the bottom of the screen.
-+If the user then types a carriage return, one more line is displayed.
-+If the user hits a space,
-+another screenful is displayed. Other possibilities are enumerated later.
-+.PP
-+.I Bzmore
-+looks in the file
-+.I /etc/termcap
-+to determine terminal characteristics,
-+and to determine the default window size.
-+On a terminal capable of displaying 24 lines,
-+the default window size is 22 lines.
-+Other sequences which may be typed when
-+.I bzmore
-+pauses, and their effects, are as follows (\fIi\fP is an optional integer
-+argument, defaulting to 1) :
-+.PP
-+.IP \fIi\|\fP<space>
-+display
-+.I i
-+more lines, (or another screenful if no argument is given)
-+.PP
-+.IP ^D
-+display 11 more lines (a ``scroll'').
-+If
-+.I i
-+is given, then the scroll size is set to \fIi\|\fP.
-+.PP
-+.IP d
-+same as ^D (control-D)
-+.PP
-+.IP \fIi\|\fPz
-+same as typing a space except that \fIi\|\fP, if present, becomes the new
-+window size. Note that the window size reverts back to the default at the
-+end of the current file.
-+.PP
-+.IP \fIi\|\fPs
-+skip \fIi\|\fP lines and print a screenful of lines
-+.PP
-+.IP \fIi\|\fPf
-+skip \fIi\fP screenfuls and print a screenful of lines
-+.PP
-+.IP "q or Q"
-+quit reading the current file; go on to the next (if any)
-+.PP
-+.IP "e or q"
-+When the prompt --More--(Next file:
-+.IR file )
-+is printed, this command causes bzmore to exit.
-+.PP
-+.IP s
-+When the prompt --More--(Next file:
-+.IR file )
-+is printed, this command causes bzmore to skip the next file and continue.
-+.PP
-+.IP =
-+Display the current line number.
-+.PP
-+.IP \fIi\|\fP/expr
-+search for the \fIi\|\fP-th occurrence of the regular expression \fIexpr.\fP
-+If the pattern is not found,
-+.I bzmore
-+goes on to the next file (if any).
-+Otherwise, a screenful is displayed, starting two lines before the place
-+where the expression was found.
-+The user's erase and kill characters may be used to edit the regular
-+expression.
-+Erasing back past the first column cancels the search command.
-+.PP
-+.IP \fIi\|\fPn
-+search for the \fIi\|\fP-th occurrence of the last regular expression entered.
-+.PP
-+.IP !command
-+invoke a shell with \fIcommand\|\fP.
-+The character `!' in "command" are replaced with the
-+previous shell command. The sequence "\\!" is replaced by "!".
-+.PP
-+.IP ":q or :Q"
-+quit reading the current file; go on to the next (if any)
-+(same as q or Q).
-+.PP
-+.IP .
-+(dot) repeat the previous command.
-+.PP
-+The commands take effect immediately, i.e., it is not necessary to
-+type a carriage return.
-+Up to the time when the command character itself is given,
-+the user may hit the line kill character to cancel the numerical
-+argument being formed.
-+In addition, the user may hit the erase character to redisplay the
-+--More-- message.
-+.PP
-+At any time when output is being sent to the terminal, the user can
-+hit the quit key (normally control\-\\).
-+.I Bzmore
-+will stop sending output, and will display the usual --More--
-+prompt.
-+The user may then enter one of the above commands in the normal manner.
-+Unfortunately, some output is lost when this is done, due to the
-+fact that any characters waiting in the terminal's output queue
-+are flushed when the quit signal occurs.
-+.PP
-+The terminal is set to
-+.I noecho
-+mode by this program so that the output can be continuous.
-+What you type will thus not show on your terminal, except for the / and !
-+commands.
-+.PP
-+If the standard output is not a teletype, then
-+.I bzmore
-+acts just like
-+.I bzcat,
-+except that a header is printed before each file.
-+.SH FILES
-+.DT
-+/etc/termcap Terminal data base
-+.SH "SEE ALSO"
-+more(1), less(1), bzip2(1), bzdiff(1), bzgrep(1)
-diff -Nru bzip2-1.0.2/doc/pl/Makefile.am bzip2-1.0.2.new/doc/pl/Makefile.am
---- bzip2-1.0.2/doc/pl/Makefile.am Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/pl/Makefile.am Fri Feb 1 04:19:11 2002
-@@ -0,0 +1,4 @@
-+
-+mandir = @mandir@/pl
-+man_MANS = bzip2.1 bunzip2.1 bzcat.1 bzip2recover.1
-+
-diff -Nru bzip2-1.0.2/doc/pl/bunzip2.1 bzip2-1.0.2.new/doc/pl/bunzip2.1
---- bzip2-1.0.2/doc/pl/bunzip2.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/pl/bunzip2.1 Fri Feb 1 04:19:11 2002
-@@ -0,0 +1 @@
-+.so bzip2.1
-\ No newline at end of file
-diff -Nru bzip2-1.0.2/doc/pl/bzcat.1 bzip2-1.0.2.new/doc/pl/bzcat.1
---- bzip2-1.0.2/doc/pl/bzcat.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/pl/bzcat.1 Fri Feb 1 04:19:11 2002
-@@ -0,0 +1 @@
-+.so bzip2.1
-\ No newline at end of file
-diff -Nru bzip2-1.0.2/doc/pl/bzip2.1 bzip2-1.0.2.new/doc/pl/bzip2.1
---- bzip2-1.0.2/doc/pl/bzip2.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/pl/bzip2.1 Fri Feb 1 04:19:11 2002
-@@ -0,0 +1,384 @@
-+.\" T³umaczenie Maciej Wojciechowski wojciech@staszic.waw.pl
-+.PU
-+.TH bzip2 1 "" "" "wersja 1.0"
-+.SH NAZWA
-+bzip2, bunzip2 \- sortuj±cy bloki kompresor/dekompresor plików, v1.0
-+.br
-+bzcat \- dekompresuje pliki na standardowe wyj¶cie
-+.br
-+bzip2recover \- odzyskuje dane ze zniszczonych archiwów bzip2
-+.SH SK£ADNIA
-+.ll +8
-+.B bzip2
-+.RB [ \-cdfkqstvzVL123456789 ]
-+.RI [ nazwy_plików \&...]
-+.ll -8
-+.br
-+.B bunzip2
-+.RB [ \-fkvsVL ]
-+.RI [ nazwy_plików \&...]
-+.br
-+.B bzcat
-+.RB [ \-s ]
-+.RI [ nazwy_plików \&...]
-+.br
-+.B bzip2recover
-+.I nazwa_pliku
-+.SH OPIS
-+.I bzip2
-+kompresuje pliki u¿ywaj±c algorytmu sortowania bloków Burrowsa-Wheelera i
-+kodu Huffmana. Kompresja jest generalnie sporo lepsza od konwencjonalnych
-+kompresorów opartych o metodê LZ77/LZ78, i jest porównywalna z
-+osi±gniêciami statystycznych kompresorów z rodziny PPM.
-+
-+Opcje linii poleceñ s± w wiêkszo¶ci bardzo podobne do tych z
-+.IR "GNU gzip" ,
-+ale nie s± identyczne.
-+
-+.I bzip2
-+oczekuje listy plików towarzysz±cych parametrom linii poleceñ. Ka¿dy plik jest
-+zastêpowany przez swoj± skompresowan± wersjê, z nazw±
-+"oryginalny_plik.bz2". Ka¿dy skompresowany plik ma ten sam czas modyfikacji,
-+uprawnienia i, je¶li to mo¿liwe, w³a¶ciciela co orygina³, po to, aby te
-+ustawienia mog³y zostaæ odtworzone podczas dekompresji. Utrzymywanie nazwy
-+plików nie jest do koñca dok³adne w tym sensie, ¿e nie ma mo¿liwo¶ci
-+przetrzymywania daty, uprawnieñ, w³a¶ciciela i nazw plików na systemach, na
-+których brakuje tych mo¿liwo¶ci lub maj± ograniczenia co do d³ugo¶ci nazwy,
-+tak np. jak MS-DOS.
-+
-+.I bzip2
-+i
-+.I bunzip2
-+standardowo nie nadpisuj± istniej±cych ju¿ plików. Je¶li chcesz aby to
-+robi³y, musisz u¿yæ parametru \-f.
-+
-+Je¶li nie podano ¿adnej nazwy pliku,
-+.I bzip2
-+kompresuje ze standardowego wej¶cia na standardowe wyj¶cie. Odmiawia wówczas
-+wypisywania skompresowanego wyj¶cie na terminal, gdy¿ by³oby to
-+ca³kiem niezrozumia³e i przez to bez wiêkszego sensu.
-+
-+.I bunzip2
-+(lub
-+.IR bzip2 \-d )
-+dekompresuje wszystkie podane pliki. Pliki, które nie by³y
-+utworzone przez
-+.I bzip2
-+zostan± wykryte i zignorowane, a na ekranie pojawi siê komunikat
-+ostrzegawczy.
-+.I bzip2
-+próbuje zgadn±æ nazwê dla dekompresowanego pliku w nastêpuj±cy sposób:
-+.nf
-+ nazwa_pliku.bz2 staje siê nazwa_pliku
-+ nazwa_pliku.bz staje siê nazwa_pliku
-+ nazwa_pliku.tbz2 staje siê nazwa_pliku.tar
-+ nazwa_pliku.tbz staje siê nazwa_pliku.tar
-+ inna_nazwa staje siê inna_nazwa.out
-+.fi
-+Je¶li plik nie ma jednego z nastêpuj±cych rozpoznawalnych rozszerzeñ,
-+.IR .bz2 ,
-+.IR .bz ,
-+.I .tbz2
-+lub
-+.IR .tbz ,
-+to
-+.I bzip2
-+napisze, ¿e nie mo¿e zgadn±æ nazwy pierwotnego pliku, i u¿yje
-+oryginalnej nazwy z dodanym rozszerzeniem
-+.IR .out .
-+
-+Tak jak kompresja, nie posiadaj±ca ¿adnych plików, powoduje kompresjê ze
-+standardowego wej¶cia na standardowe wyj¶cie.
-+
-+.I bunzip2
-+poprawnie zdekompresuje plik, który jest po³aczeniem dwóch lub wiêcej
-+skompresowanych plików. Rezultatem jest po³±czony odpowiedni
-+nieskompresowany plik. Obs³ugiwane jest równie¿ sprawdzanie spójno¶ci
-+(\-t) po³±czonych skompresowanych plików.
-+
-+Mo¿esz równie¿ kompresowaæ lub dekompresowaæ pliki na standardowe wyj¶cie
-+u¿ywaj±c parametru \-c. W ten w³a¶nie sposób mo¿na przeprowadzaæ kompresjê
-+wielu plików równocze¶nie.
-+Powsta³e wyniki s± przesy³ane sekwencyjnie na standardowe wyj¶cie.
-+W ten sposób kompresja wielu plików generuje strumieñ
-+zawieraj±cy reprezentacje kilku skompresowanych plików. Taki strumieñ mo¿e
-+byæ zdekompresowany poprawnie tylko przez
-+.I bzip2
-+w wersji 0.9.0 lub pó¼niejszej. Wcze¶niejsze wersje
-+.I bzip2
-+zatrzymaj± siê po zdekmpresowaniu pierwszego pliku w strumieniu.
-+
-+.I bzcat
-+(lub
-+.I bzip2 -dc)
-+dekompresuje wszystkie wybrane pliki na standardowe wyj¶cie.
-+
-+.I bzip2
-+czyta argumenty ze zmiennych ¶rodowiskowych
-+.I BZIP2
-+i
-+.I BZIP,
-+w podanej kolejno¶ci, i przetwarza je przed jakimikolwiek argumentami
-+przeczytanymi z linii poleceñ. To dobra metoda na specyfikowanie
-+standardowych ustawieñ.
-+
-+Kompresja stosowana jest zawsze, nawet je¶li skompresowany plik jest
-+nieznaczniej wiêkszy od pliku oryginalnego. Pliki mniejsze ni¿ mniej wiêcej
-+sto bajtów staj± siê wiêksze, poniewa¿ mechanizm kompresji ma sta³y
-+nag³ówek wynosz±cy oko³o 50 bajtów. Przypadkowe dane (w³±czaj±c wyj¶cie
-+wiêkszo¶ci kompresorów plików) d± kodowane na mniej wiêcej 8.05 bitu na
-+bajt, daj±c zysk oko³o 0.5%.
-+
-+Jako samosprawdzenie dla twojej ochrony
-+.I bzip2
-+u¿ywa 32-bitowego CRC aby upewniæ siê, ¿e zdekompresowana wersja pliku jest
-+identyczna z oryginaln±. To strze¿e przed stratami w skompresowanych danych
-+i przed niewykrytymi b³êdami w
-+.I bzip2
-+(na szczê¶cie bardzo rzadkich). Mo¿liwo¶æ niewykrycia utraty danych
-+jest mikroskopijna, mniej wiêcej jedna szansa na cztery biliony dla ka¿dego
-+pliku. Uwa¿aj jednak, gdy¿ sprawdzenie jest dokonywane przed dekompresj±,
-+wiêc dowiesz siê tylko tego, ¿e co¶ jest nie w porz±dku. Nie pomo¿e ci to odzyskaæ
-+oryginalnych nieskompresowanych danych. Mo¿esz u¿yæ
-+.I bzip2recover
-+aby spróbowaæ odzyskaæ dane z uszkodzonych plików.
-+
-+Zwracane warto¶ci: 0 dla normalnego wyj¶cia, 1 dla problemów technicznych
-+(plik nie znaleziony, niew³a¶ciwy parametr, b³±d wyj¶cia/wyj¶cia itp.), 2 dla
-+zasygnalizowania b³êdu skompresowanego pliku, 3 dla wewnêtrznego b³êdu (np.
-+bug), który zmusi³ \fIbzip2\fP do przerwania.
-+
-+.SH OPCJE
-+.TP
-+.B \-c --stdout
-+Kompresuje lub dekompresuje na standardowe wyj¶cie.
-+.TP
-+.B \-d --decompress
-+Wymusza dekompresjê.
-+.IR bzip2 ,
-+.I bunzip2
-+i
-+.I bzcat
-+s± tak naprawdê tymi samymi programami i decyzja jakie akcje bêd± wykonane
-+jest wykonywana na podstawie nazwy jaka zosta³a u¿yta. Ten parametr ma wy¿szy
-+priorytet i wymusza na \fIbzip2\fP dekompresjê.
-+.TP
-+.B \-z --compress
-+Podobne do \-d: wymusza kompresjê, bez wzglêdu na sposób wywo³ania.
-+.TP
-+.B \-t --test
-+Sprawdza integralno¶æ wybranego pliku(ów), ale nie dekompresuje ich. Wymusza
-+to próbn± dekompresjê i mówi, jaki jest rezultat.
-+.TP
-+.B \-f --force
-+Wymusza zastêpowanie plików wyj¶ciowych. Normalnie, \fIbzip2\fP nie
-+zastêpuje istniej±cych plików wyj¶ciowych. Wymusza równie¿ na \fIbzip2\fP
-+³amanie dowi±zañ twardych, czego normalnie nie robi.
-+.TP
-+.B \-k --keep
-+Zatrzymaj (nie kasuj) pliki wej¶ciowe przy kompresji lub dekompresji.
-+.TP
-+.B \-s --small
-+Zredukuj u¿ycie pamiêci na kompresjê, dekompresjê i testowanie. Pliki s±
-+dekompresowane i testowane przy u¿yciu zmodyfikowanego algorytmu, który
-+potrzebuje tylko 2.5 bajtu na blok bajtów. Oznacza to, ¿e ka¿dy plik mo¿e
-+byæ zdekompresowany przy u¿yciu oko³o 2300k pamiêci, jednak trac±c oko³o po³owê
-+normalnej szybko¶ci.
-+
-+Podczas kompresji, \-s wybiera bloki wielko¶ci 200k, których limity
-+pamiêci wynosz± mniej wiêcej tyle samo, w zamian za jako¶æ kompresji. W
-+skrócie, je¶li twój komputer ma ma³o pamiêci (8 megabajtów lub mniej),
-+u¿ywaj opcji \-s do wszystkiego. Zobacz \fBzarz±dzanie pamiêci±\fP poni¿ej.
-+.TP
-+.B \-q --quiet
-+Wy³±cza wszystkie nieistotne komunikaty ostrzegawcze.
-+Nie s± eliminowane komunikaty dotycz±ce b³êdów wej¶cia/wyj¶cia i innych
-+zdarzeñ krytycznych.
-+.TP
-+.B \-v --verbose
-+Tryb gadatliwy -- pokazuje stopieñ kompresji dla ka¿dego pliku. Nastêpne
-+\fB\-v\fP zwiêkszaj± stopieñ gadatliwo¶ci, powoduj±c wy¶wietlanie du¿ej
-+ilo¶ci informacji, przydatnych g³ównie przy diagnostyce.
-+.TP
-+.B \-L --license -V --version
-+Wy¶wietla wersjê programu i warunki licencji.
-+.TP
-+.B \-1 to \-9
-+Ustawia wielko¶æ bloku na 100 k, 200 k .. 900 k przy kompresji. Nie ma
-+¿adnego znaczenia przy dekompresji. Zobacz \fBzarz±dzanie pamiêci±\fP
-+poni¿ej.
-+.TP
-+.B \--
-+Traktuje wszystkie nastêpuj±ce po nim argumenty jako nazwy plików, nawet je¶li
-+zaczynaj± siê one od my¶lnika. Mo¿esz wiêc kompresowaæ i dekompresowaæ
-+pliki, których nazwa zaczyna siê od my¶lnika, na przyk³ad: bzip2 \--
-+\-mój_plik.
-+.TP
-+.B \--repetitive-fast --repetitive-best
-+Te parametry nie maj± znaczenia w wersjach 0.9.5 i wy¿szych. Umo¿liwia³y one
-+pewn± infantyln± kontrolê nad zachowaniem algorytmu sortuj±cego we
-+wcze¶niejszych wersjach, co by³o czasami u¿yteczne. Wersje 0.9.5 i wy¿sze
-+maj± usprawniony algorytm, który powoduje bezu¿yteczno¶æ tej funkcji.
-+
-+.SH ZARZ¡DZANIE PAMIÊCI¡
-+.I bzip2
-+kompresuje du¿e pliki w blokach. Rozmiar bloku ma wp³yw zarówno na stopieñ
-+osi±ganej kompresji, jak równie¿ na ilo¶æ pamiêci potrzebnej do kompresji
-+i dekompresji. Parametry od \-1 do \-9 wybieraj± rozmiar bloku odpowiednio
-+od 100,000 bajtów a¿ do 900,000 bajtów (standardowo). W czasie dekompresji,
-+rozmiar bloku u¿ytego do kompresji jest odczytywany z nag³ówku pliku
-+skompresowanego i
-+.I bunzip2
-+sam zajmuje odpowiedni± do dekompresji ilo¶æ pamiêci. Poniewa¿ rozmiar
-+bloków jest przetrzymywany w pliku skompresowanym, parametry od \-1 do \-9
-+nie maj± przy dekompresji ¿adnego znaczenia.
-+
-+Wymagania kompresji i dekompresji w bajtach, mog± byæ wyliczone przez:
-+
-+ Kompresja : 400k + ( 8 x rozmiar bloku )
-+
-+ Dekompresja : 100k + ( 4 x rozmiar bloku ) lub
-+ 100k + ( 2.5 x rozmiar bloku )
-+
-+Wiêksze bloki daj± du¿e zmniejszenie zwrotów marginalnych. Wiêkszo¶æ
-+kompresji pochodzi z pierwszych stu lub dwustu kilobajtów rozmiaru bloku.
-+Warto o tym pamiêtaæ u¿ywaj±c \fIbzip2\fP na wolnych
-+komputerach. Warto równie¿ podkre¶liæ, ¿e rozmiar pamiêci potrzebnej do
-+dekompresji jest wybierany poprzez ustawienie odpowiedniej
-+wielko¶ci bloku przy kompresji.
-+
-+Dla plików skompresowanych standardowym blokiem wielko¶ci 900k,
-+\fIbunzip2\fP bêdzie wymaga³ oko³o 3700 kilobajtów do dekompresji. Aby
-+umo¿liwiæ dekompresjê na komputerze wyposa¿onym jedynie w 4 megabajty
-+pamiêci, \fIbunzip2\fP ma opcjê, która mo¿e zmniejszyæ wymagania prawie do
-+po³owy, tzn. oko³o 2300 kilobajtów. Prêdko¶æ dekompresji jest równie¿ bardzo
-+zmiejszona, wiêc u¿ywaj tej opcji tylko wtedy, kiedy jest to konieczne. Tym
-+parametrem jest -s.
-+
-+Generalnie, próbuj i u¿ywaj najwiêkszych rozmiarów bloków, je¶li ilo¶æ
-+pamiêci ci na to pozwala. Prêdko¶æ kompresji i dekompresji w zasadzie nie
-+zale¿y od wielko¶ci u¿ytego bloku.
-+
-+Inna wa¿na rzecz dotyczy plików, które mieszcz± siê w pojedyñczym bloku --
-+oznacza to wiêkszo¶æ plików na które siê natkniesz u¿ywaj±c du¿ych bloków.
-+Rozmiar realny pamiêci zabieranej jest proporcjonalny do wielko¶ci pliku,
-+je¶li plik jest mniejszy ni¿ blok. Na przyk³ad, kompresja pliku o
-+wielko¶ci 20,000 bajtów z parametrem -9 wymusi na kompresorze odnalezienie
-+7600 k pamiêci, ale zajêcie tylko 400k + 20000 * 8 = 560 kilobajtów z
-+tego. Podobnie, dekompresor odnajdzie 3700k, ale zajmie tylko 100k + 20000
-+* 4 = 180 kilobajtów.
-+
-+Tu jest tabela, która podsumowuje maksymalne u¿ycie pamiêci dla ró¿nych
-+rozmiarów bloków. Podano te¿ ca³kowity rozmiar skompresowanych 14
-+plików tekstowych (Calgary Text Compressione Corpus) zajmuj±cych razem
-+3,141,622 bajtów. Ta kolumna daje pewne pojêcie o tym, jaki wp³yw na
-+kompresjê ma wielko¶æ bloków. Ta tabela uzmys³awia równie¿ przewagê u¿ycia
-+wiêkszych bloków dla wiêkszych plików, poniewa¿ "Corpus" jest zdominowany
-+przez mniejsze pliki.
-+.nf
-+ U¿ycie U¿ycie U¿ycie Corpus
-+ Parametr kompresji dekompresji dekompresji -s Size
-+
-+ -1 1200k 500k 350k 914704
-+ -2 2000k 900k 600k 877703
-+ -3 2800k 1300k 850k 860338
-+ -4 3600k 1700k 1100k 846899
-+ -5 4400k 2100k 1350k 845160
-+ -6 5200k 2500k 1600k 838626
-+ -7 6100k 2900k 1850k 834096
-+ -8 6800k 3300k 2100k 828642
-+ -9 7600k 3700k 2350k 828642
-+.fi
-+.SH ODZYSKIWANIE DANYCH ZE ZNISZCZONYCH PLIKÓW BZIP2
-+.I bzip2
-+kompresuje pliki w blokach, zazwyczaj 900 kilbajtowych. Ka¿dy blok jest
-+trzymany osobno. Je¶li b³êdy transmisji lub no¶nika uszkodz± plik
-+wieloblokowy .bz2, mo¿liwe jest odtworzenie danych zawartych w
-+niezniszczonych blokach pliku.
-+
-+Ka¿dy blok jest reprezentowany przez 48-bitowy wzorzec, który umo¿liwia
-+znajdowanie przyporz±dkowañ bloków z rozs±dn± pewno¶ci±. Ka¿dy blok
-+ma równie¿ swój 32-bitowy CRC, wiêc bloki uszkodzone mog± byæ ³atwo
-+odseparowane od poprawnych.
-+
-+.I bzip2recover
-+jest oddzielnym programem, którego zadaniem jest poszukiwanie bloków w
-+plikach .bz2 i zapisywanie ich do w³asnego pliku .bz2. Mo¿esz potem u¿yæ
-+\fIbzip2\fP \-t aby sprawdziæ spójno¶æ wyj¶ciowego pliku i zdekompresowaæ
-+te, które nie s± uszkodzone.
-+
-+.I bzip2recover
-+pobiera pojedynczy argument, nazwê uszkodzonego pliku, i tworzy pewn± liczbê
-+plików "rec0001plik.bz2", "rec0002plik.bz2", itd., przetrzymuj±ce odzyskane
-+bloki. Wyj¶ciowe nazwy plików s± tak tworzone, aby ³atwo by³o potem u¿ywaæ
-+ich razem za pomoc± gwiazdek -- na przyk³ad, "bzip2 -dc rec*plik.bz2 >
-+odzyskany_plik" -- wylistuje pliki we w³a¶ciwej kolejno¶ci.
-+
-+.I bzip2recover
-+powinien byæ u¿ywany najczê¶ciej z du¿ymi plikami .bz2, jako i¿ one
-+zawieraj± najczê¶ciej du¿o bloków. Jest czystym bezsensem u¿ywaæ go na
-+uszkodzonym jedno-blokowym pliku, poniewa¿ uszkodzony blok nie mo¿e byæ
-+odzyskany. Je¶li chcesz zminimalizowaæ jakiekolwiek mo¿liwe straty danych
-+poprzez no¶nik lub transmisjê, powiniene¶ zastanowiæ siê nad u¿yciem
-+mniejszych bloków.
-+
-+.SH OPISY WYNIKÓW
-+Etap sortuj±cy kompresji ³±czy razem podobne ci±gi znaków w pliku. Przez
-+to, pliki zawieraj±ce bardzo d³ugie ci±gi powtarzaj±cych siê symboli, jak
-+"aabaabaabaab ..." (powtórzone kilkaset razy) mog± byæ kompresowane wolniej
-+ni¿ normalnie. Wersje 0.9.5 i wy¿sze zachowuj± siê du¿o lepiej w tej
-+sytuacji ni¿ wersje poprzednie. Ró¿nica stopnia kompresji pomiêdzy
-+najgorszym i najlepszym przypadkiem kompresji wynosi oko³o 10:1. Dla
-+wcze¶niejszych wersji by³o to nawet oko³o 100:1. Je¶li chcesz, mo¿esz u¿yæ
-+parametru \-vvvv aby monitorowaæ postêpy bardzo szczegó³owo.
-+
-+Prêdko¶æ dekompresji nie jest zmieniana przez to zjawisko.
-+
-+.I bzip2
-+zazwyczaj rezerwuje kilka megabajtów pamiêci do dzia³ania a
-+potem wykorzystuje j± w sposób zupe³nie przypadkowy.
-+Oznacza to, ¿e zarówno prêdko¶æ kompresji jak i dekompresji jest w
-+du¿ej czê¶ci zale¿na od prêdko¶ci, z jak± twój komputer mo¿e naprawiaæ braki
-+bufora podrêcznego. Z tego powodu, wprowadzone zosta³y ma³e zmiany kody aby
-+zmniejszyæ straty, które da³y nieproporcjonalnie du¿y wzrost osi±gniêæ.
-+My¶lê, ¿e
-+.I bzip2
-+bêdzie dzia³a³ najlepiej na komputerach z du¿ymi buforami podrêcznymi.
-+
-+.SH ZAKAMARKI
-+Wiadomo¶ci o b³êdach wej¶cia/wyj¶cia nie s± a¿ tak pomocne, jak mog³yby byæ.
-+.I bzip2
-+stara siê wykryæ b³±d wej¶cia/wyj¶cia i wyj¶æ "czysto", ale
-+szczegó³y tego, jaki to problem mog± byæ czasami bardzo myl±ce.
-+
-+Ta strona podrêcznika odnosi siê do wersji 1.0 programu \fIbzip2\fP.
-+Skompresowane pliki utworzone przez tê wersjê s± kompatybilne zarówno z
-+w przód jak i wstecznie z poprzednimi publicznymi wydaniami,
-+wersjami 0.1pl2, 0.9.0 i 0.9.5 ale z ma³ymi wyj±tkami: 0.9.0 i wy¿sze potrafi±
-+poprawnie dekompresowaæ wiele skompresowanych plików z³±czonych w jeden.
-+0.1pl2 nie potrafi tego; zatrzyma siê ju¿ po dekompresji pierwszego pliku w
-+strumieniu.
-+
-+.I bzip2recover
-+u¿ywa 32-bitowych liczb do reprezentacji pozycji bitu w skompresowanym
-+pliku, wiêc nie mo¿e przetwarzaæ skompresowanych plików d³u¿szych ni¿ 512
-+megabajtów. Mo¿na to ³atwo naprawiæ.
-+
-+.SH AUTOR
-+Julian Seward, jseward@acm.org.
-+
-+http://www.muraroa.demon.co.uk
-+http://sourceware.cygnus.com/bzip2
-+
-+Idee zawarte w \fIbzip2\fP s± podzielone (przynajmniej) pomiêdzy
-+nastepuj±cy ludzi: Michael Burrows i David Wheeler (transformacja
-+sortuj±c± bloki), David Wheeler (znów, koder Huffmana), Peter Fenwick
-+(struktura kodowania modelu w oryginalnym \fIbzip2\fP, i wiele
-+udoskonaleñ), i Alistair Moffar, Radford Neal i Ian Witten (arytmetyczny
-+koder w oryginalnym \fIbzip2\fP). Jestem im bardzo wdziêczny za ich pomoc,
-+wsparcie i porady. Zobacz stronê manuala w ¼ród³owej dystrybucji po
-+wska¼niki do ¼róde³ dokumentacji. Christian von Roques zachêci³ mnie do
-+wymy¶lenia szybszego algorytmu sortuj±cego, po to ¿eby przyspieszyæ
-+kompresjê. Bela Lubkin zachêci³a mnie do polepszenia najgorszych wyników
-+kompresji. Wiele ludzi przys³a³o ³atki, pomog³o w ró¿nych problemach,
-+po¿yczy³o komputerów, da³o rady i by³o ogólnie pomocnych.
-diff -Nru bzip2-1.0.2/doc/pl/bzip2recover.1 bzip2-1.0.2.new/doc/pl/bzip2recover.1
---- bzip2-1.0.2/doc/pl/bzip2recover.1 Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/doc/pl/bzip2recover.1 Fri Feb 1 04:19:11 2002
-@@ -0,0 +1 @@
-+.so bzip2.1
-\ No newline at end of file
-diff -Nru bzip2-1.0.2/huffman.c bzip2-1.0.2.new/huffman.c
---- bzip2-1.0.2/huffman.c Sun Dec 30 03:19:17 2001
-+++ bzip2-1.0.2.new/huffman.c Fri Feb 1 04:19:11 2002
-@@ -58,6 +58,10 @@
- For more information on these sources, see the manual.
- --*/
-
-+#ifdef HAVE_CONFIG_H
-+#include <config.h>
-+#endif
-+
-
- #include "bzlib_private.h"
-
-diff -Nru bzip2-1.0.2/makefile.msc bzip2-1.0.2.new/makefile.msc
---- bzip2-1.0.2/makefile.msc Wed Jan 2 05:02:33 2002
-+++ bzip2-1.0.2.new/makefile.msc Thu Jan 1 01:00:00 1970
-@@ -1,63 +0,0 @@
--# Makefile for Microsoft Visual C++ 6.0\r
--# usage: nmake -f makefile.msc\r
--# K.M. Syring (syring@gsf.de)\r
--# Fixed up by JRS for bzip2-0.9.5d release.\r
--\r
--CC=cl\r
--CFLAGS= -DWIN32 -MD -Ox -D_FILE_OFFSET_BITS=64 -nologo\r
--\r
--OBJS= blocksort.obj \\r
-- huffman.obj \\r
-- crctable.obj \\r
-- randtable.obj \\r
-- compress.obj \\r
-- decompress.obj \\r
-- bzlib.obj\r
--\r
--all: lib bzip2 test\r
--\r
--bzip2: lib\r
-- $(CC) $(CFLAGS) -o bzip2 bzip2.c libbz2.lib setargv.obj\r
-- $(CC) $(CFLAGS) -o bzip2recover bzip2recover.c\r
--\r
--lib: $(OBJS)\r
-- lib /out:libbz2.lib $(OBJS)\r
--\r
--test: bzip2\r
-- type words1\r
-- .\\bzip2 -1 < sample1.ref > sample1.rb2\r
-- .\\bzip2 -2 < sample2.ref > sample2.rb2\r
-- .\\bzip2 -3 < sample3.ref > sample3.rb2\r
-- .\\bzip2 -d < sample1.bz2 > sample1.tst\r
-- .\\bzip2 -d < sample2.bz2 > sample2.tst\r
-- .\\bzip2 -ds < sample3.bz2 > sample3.tst\r
-- @echo All six of the fc's should find no differences.\r
-- @echo If fc finds an error on sample3.bz2, this could be\r
-- @echo because WinZip's 'TAR file smart CR/LF conversion'\r
-- @echo is too clever for its own good. Disable this option.\r
-- @echo The correct size for sample3.ref is 120,244. If it\r
-- @echo is 150,251, WinZip has messed it up.\r
-- fc sample1.bz2 sample1.rb2 \r
-- fc sample2.bz2 sample2.rb2\r
-- fc sample3.bz2 sample3.rb2\r
-- fc sample1.tst sample1.ref\r
-- fc sample2.tst sample2.ref\r
-- fc sample3.tst sample3.ref\r
--\r
--\r
--\r
--clean: \r
-- del *.obj\r
-- del libbz2.lib \r
-- del bzip2.exe\r
-- del bzip2recover.exe\r
-- del sample1.rb2 \r
-- del sample2.rb2 \r
-- del sample3.rb2\r
-- del sample1.tst \r
-- del sample2.tst\r
-- del sample3.tst\r
--\r
--.c.obj: \r
-- $(CC) $(CFLAGS) -c $*.c -o $*.obj\r
--\r
-diff -Nru bzip2-1.0.2/randtable.c bzip2-1.0.2.new/randtable.c
--- bzip2-1.0.2/randtable.c Sun Dec 30 03:19:04 2001
+++ bzip2-1.0.2.new/randtable.c Fri Feb 1 04:19:18 2002
-@@ -58,6 +58,10 @@
+@@ -58,6 +58,9 @@
For more information on these sources, see the manual.
--*/
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
-+
#include "bzlib_private.h"
-diff -Nru bzip2-1.0.2/spewG.c bzip2-1.0.2.new/spewG.c
--- bzip2-1.0.2/spewG.c Thu Apr 6 01:24:45 2000
+++ bzip2-1.0.2.new/spewG.c Fri Feb 1 04:19:18 2002
-@@ -9,7 +9,10 @@
+@@ -9,7 +9,9 @@
(but is otherwise harmless).
*/
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
-+
#include <stdio.h>
#include <stdlib.h>
-diff -Nru bzip2-1.0.2/stamp-h.in bzip2-1.0.2.new/stamp-h.in
---- bzip2-1.0.2/stamp-h.in Thu Jan 1 01:00:00 1970
-+++ bzip2-1.0.2.new/stamp-h.in Fri Feb 1 04:19:18 2002
-@@ -0,0 +1 @@
-+timestamp
diff -Nru bzip2-1.0.2/unzcrash.c bzip2-1.0.2.new/unzcrash.c
--- bzip2-1.0.2/unzcrash.c Thu Apr 6 01:24:46 2000
+++ bzip2-1.0.2.new/unzcrash.c Fri Feb 1 04:19:18 2002
-@@ -13,6 +13,12 @@
+@@ -13,6 +13,10 @@
many hours.
*/
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
-+
-+
+
#include <stdio.h>
#include <assert.h>