-diff -Nur autoconf-2.53.orig/doc/autoconf.texi autoconf-2.53/doc/autoconf.texi
---- autoconf-2.53.orig/doc/autoconf.texi Fri Mar 8 13:57:41 2002
-+++ autoconf-2.53/doc/autoconf.texi Sat Mar 16 12:31:46 2002
-@@ -32,27 +32,16 @@
- @end ifnothtml
+--- autoconf-2.69/doc/autoconf.texi.orig 2013-10-15 07:44:41.594844773 +0200
++++ autoconf-2.69/doc/autoconf.texi 2013-10-15 07:45:45.782179984 +0200
+@@ -217,29 +217,19 @@
--@dircategory GNU admin
+
+-@dircategory Software development
+@dircategory Programming tools:
@direntry
--* Autoconf: (autoconf). Create source code configuration scripts
+-* Autoconf: (autoconf). Create source code configuration scripts.
-@end direntry
-
-@dircategory Individual utilities
-@direntry
-* autoscan: (autoconf)autoscan Invocation.
- Semi-automatic @file{configure.ac} writing
--* ifnames: (autoconf)ifnames Invocation.
-- Listing the conditionals in source code
--* autoconf: (autoconf)autoconf Invocation.
+-* ifnames: (autoconf)ifnames Invocation. Listing conditionals in source.
+-* autoconf-invocation: (autoconf)autoconf Invocation.
- How to create configuration scripts
-* autoreconf: (autoconf)autoreconf Invocation.
- Remaking multiple @command{configure} scripts
--* configure: (autoconf)configure Invocation.
-- Configuring a package
--* config.status: (autoconf)config.status Invocation.
-- Recreating a configuration
--* testsuite: (autoconf)testsuite Invocation.
-- Running an Autotest test suite
+-* autoheader: (autoconf)autoheader Invocation.
+- How to create configuration templates
+-* autom4te: (autoconf)autom4te Invocation.
+- The Autoconf executables backbone
+-* configure: (autoconf)configure Invocation. Configuring a package.
+-* autoupdate: (autoconf)autoupdate Invocation.
+- Automatic update of @file{configure.ac}
+-* config.status: (autoconf)config.status Invocation. Recreating configurations.
+-* testsuite: (autoconf)testsuite Invocation. Running an Autotest test suite.
+* Autoconf: (autoconf). Create source code configuration scripts
+* autoscan: (autoconf)autoscan. Semi-automatic @file{configure.ac} writing
-+* ifnames: (autoconf)ifnames. Listing the conditionals in source code
++* ifnames: (autoconf)ifnames. Listing conditionals in source
+* autoconf: (autoconf)autoconf. How to create configuration scripts
+* autoreconf: (autoconf)autoreconf. Remaking multiple @command{configure} scripts
++* autoheader: (autoconf)autoheader. How to create configuration templates
++* autom4te: (autoconf)autom4te. The Autoconf executables backbone
+* configure: (autoconf)configure. Configuring a package
-+* config.status: (autoconf)config.status. Recreating a configuration
-+* testsuite: (autoconf)testsuite. Running an Autotest test suite
++* autoupdate: (autoconf)autoupdate. Automatic update of @file{configure.ac}
++* config.status: (autoconf)config.status. Recreating configurations.
++* testsuite: (autoconf)testsuite. Running an Autotest test suite.
@end direntry
- @ifinfo
-@@ -162,7 +151,7 @@
+ @titlepage
+@@ -282,7 +272,7 @@
* Manual Configuration:: Selecting features that can't be guessed
* Site Configuration:: Local defaults for @command{configure}
- * Running configure scripts:: How to use the Autoconf output
+ * Running configure Scripts:: How to use the Autoconf output
-* config.status Invocation:: Recreating a configuration
+* config.status:: Recreating a configuration
* Obsolete Constructs:: Kept for backward compatibility
* Using Autotest:: Creating portable test suites
- * Questions:: Questions about Autoconf, with answers
-@@ -182,10 +171,10 @@
+ * FAQ:: Frequent Autoconf Questions, with answers
+@@ -303,10 +293,10 @@
Making @command{configure} Scripts
- * Writing configure.ac:: What to put in an Autoconf input file
+ * Writing Autoconf Input:: What to put in an Autoconf input file
-* autoscan Invocation:: Semi-automatic @file{configure.ac} writing
-* ifnames Invocation:: Listing the conditionals in source code
-* autoconf Invocation:: How to create configuration scripts
Writing @file{configure.ac}
-@@ -218,7 +207,7 @@
+@@ -341,7 +331,7 @@
Configuration Header Files
* Header Templates:: Input for the configuration headers
* Autoheader Macros:: How to specify CPP templates
Existing Tests
-@@ -389,13 +378,13 @@
+@@ -460,7 +450,7 @@
+
+ Using @command{autom4te}
+
+-* autom4te Invocation:: A GNU M4 wrapper
++* autom4te:: A GNU M4 wrapper
+ * Customizing autom4te:: Customizing the Autoconf package
+
+ Programming in M4sugar
+@@ -601,13 +591,13 @@
* System Type:: Specifying the system type
* Sharing Defaults:: Setting site-wide defaults for @command{configure}
* Defining Variables:: Specifying the compiler etc.
Obsolete Constructs
- * Obsolete config.status Use:: Different calling convention
- * acconfig.h:: Additional entries in @file{config.h.in}
+ * Obsolete config.status Use:: Obsolete convention for @command{config.status}
+ * acconfig Header:: Additional entries in @file{config.h.in}
-* autoupdate Invocation:: Automatic update of @file{configure.ac}
+* autoupdate:: Automatic update of @file{configure.ac}
* Obsolete Macros:: Backward compatibility macros
* Autoconf 1:: Tips for upgrading your files
* Autoconf 2.13:: Some fresher tips
-@@ -419,7 +408,7 @@
+@@ -632,7 +622,7 @@
* Using an Autotest Test Suite:: Autotest and the user
- * Writing testsuite.at:: Autotest macros
+ * Writing Testsuites:: Autotest macros
-* testsuite Invocation:: Running @command{testsuite} scripts
+* testsuite:: Running @command{testsuite} scripts
* Making testsuite Scripts:: Using autom4te to create @command{testsuite}
Using an Autotest Test Suite
-@@ -729,7 +718,7 @@
+@@ -992,7 +982,7 @@
@item
- a shell script called @file{config.status} that, when run, will recreate
+ a shell script called @file{config.status} that, when run, recreates
-the files listed above (@pxref{config.status Invocation});
+the files listed above (@pxref{config.status});
@item
an optional shell script normally called @file{config.cache}
-@@ -789,10 +778,10 @@
+@@ -1073,10 +1063,10 @@
@menu
- * Writing configure.ac:: What to put in an Autoconf input file
+ * Writing Autoconf Input:: What to put in an Autoconf input file
-* autoscan Invocation:: Semi-automatic @file{configure.ac} writing
-* ifnames Invocation:: Listing the conditionals in source code
-* autoconf Invocation:: How to create configuration scripts
+* autoreconf:: Remaking multiple @command{configure} scripts
@end menu
- @node Writing configure.ac
-@@ -808,7 +797,7 @@
+ @node Writing Autoconf Input
+@@ -1092,7 +1082,7 @@
or specialized features, @file{configure.ac} might need to contain some
- hand-crafted shell commands; see @ref{Portable Shell}. The
- @command{autoscan} program can give you a good start in writing
--@file{configure.ac} (@pxref{autoscan Invocation}, for more information).
-+@file{configure.ac} (@pxref{autoscan}, for more information).
+ hand-crafted shell commands; see @ref{Portable Shell, , Portable Shell
+ Programming}. The @command{autoscan} program can give you a good start
+-in writing @file{configure.ac} (@pxref{autoscan Invocation}, for more
++in writing @file{configure.ac} (@pxref{autoscan} Invocation, for more
+ information).
Previous versions of Autoconf promoted the name @file{configure.in},
- which is somewhat ambiguous (the tool needed to produce this file is not
-@@ -1036,7 +1025,7 @@
+@@ -1380,7 +1370,7 @@
@end display
@section Using @command{autoscan} to Create @file{configure.ac}
@cindex @command{autoscan}
-@@ -1058,7 +1047,7 @@
+@@ -1402,7 +1392,7 @@
use a configuration header file, you must add a call to
@code{AC_CONFIG_HEADERS} (@pxref{Configuration Headers}). You might
also have to change or add some @code{#if} directives to your program in
information about a program that can help with that job).
When using @command{autoscan} to maintain a @file{configure.ac}, simply
-@@ -1094,7 +1083,7 @@
- accumulate. Directories are browsed from last to first.
+@@ -1445,7 +1435,7 @@
+ Prepend @var{dir} to the include path. Multiple invocations accumulate.
@end table
-@node ifnames Invocation
@section Using @command{ifnames} to List Conditionals
@cindex @command{ifnames}
-@@ -1103,8 +1092,7 @@
+@@ -1454,8 +1444,7 @@
preprocessor conditionals. If a package has already been set up to have
some portability, @command{ifnames} can thus help you figure out what its
@command{configure} needs to check for. It may help fill in some gaps in a
@command{ifnames} scans all of the C source files named on the command line
(or the standard input, if none are given) and writes to the standard
-@@ -1126,7 +1114,7 @@
+@@ -1477,7 +1466,7 @@
Print the version number of Autoconf and exit.
@end table
@section Using @command{autoconf} to Create @command{configure}
@cindex @command{autoconf}
-@@ -1383,7 +1371,7 @@
+@@ -1571,8 +1560,7 @@
+ @cindex Macro invocation stack
+ Because @command{autoconf} uses @command{autom4te} behind the scenes, it
+ displays a back trace for errors, but not for warnings; if you want
+-them, just pass @option{-W error}. @xref{autom4te Invocation}, for some
+-examples.
++them, just pass @option{-W error}. @xref{autom4te}, for some examples.
+
+ @item --trace=@var{macro}[:@var{format}]
+ @itemx -t @var{macro}[:@var{format}]
+@@ -1584,7 +1572,7 @@
+
+ The @var{format} is a regular string, with newlines if desired, and
+ several special escape codes. It defaults to @samp{$f:$l:$n:$%}; see
+-@ref{autom4te Invocation}, for details on the @var{format}.
++@ref{autom4te}, for details on the @var{format}.
+
+ @item --initialization
+ @itemx -i
+@@ -1658,7 +1646,7 @@
@end group
@end example
@section Using @command{autoreconf} to Update @command{configure} Scripts
@cindex @command{autoreconf}
-@@ -1611,8 +1599,8 @@
+@@ -1695,8 +1683,8 @@
+ Gettext supplies the @command{autopoint} command to add translation
+ infrastructure to a source package. If you use @command{autopoint},
+ your @file{configure.ac} should invoke both @code{AM_GNU_GETTEXT} and
+-@code{AM_GNU_GETTEXT_VERSION(@var{gettext-version})}. @xref{autopoint
+-Invocation, , Invoking the @code{autopoint} Program, gettext,
++@code{AM_GNU_GETTEXT_VERSION(@var{gettext-version})}.
++@xref{autopoint, , Invoking the @code{autopoint} Program, gettext,
+ GNU @code{gettext} utilities}, for further details.
+
+ @noindent
+@@ -2032,8 +2020,8 @@
source directory; @command{configure} checks for this file's existence to
make sure that the directory that it is told contains the source code in
fact does. Occasionally people accidentally specify the wrong directory
@end defmac
-@@ -1778,7 +1766,7 @@
+@@ -2247,7 +2235,7 @@
when used in @var{output}, or the standard input when used in the
@var{inputs}. You most probably don't need to use this in
@file{configure.ac}, but it is convenient when using the command line
+interface of @file{./config.status}, see @ref{config.status},
for more details.
- The @var{inputs} may be absolute or relative filenames. In the latter
-@@ -2350,7 +2338,7 @@
- @file{config.h} is considered up to date. @xref{Output}, for more
- information about @code{AC_OUTPUT}.
+ The @var{inputs} may be absolute or relative file names. In the latter
+@@ -3182,7 +3170,7 @@
+ so @file{config.status} ensures that @file{config.h} is considered up to
+ date. @xref{Output}, for more information about @code{AC_OUTPUT}.
-@xref{config.status Invocation}, for more examples of handling
+@xref{config.status}, for more examples of handling
configuration-related dependencies.
@node Configuration Headers
-@@ -2411,7 +2399,7 @@
+@@ -3262,7 +3250,7 @@
@menu
* Header Templates:: Input for the configuration headers
* Autoheader Macros:: How to specify CPP templates
@end menu
-@@ -2462,10 +2450,10 @@
- @samp{#undef} is strongly discouraged.
+@@ -3304,7 +3292,7 @@
+ generated header.
Since it is a tedious task to keep a template header up to date, you may
-use @command{autoheader} to generate it, see @ref{autoheader Invocation}.
+use @command{autoheader} to generate it, see @ref{autoheader}.
+ During the instantiation of the header, each @samp{#undef} line in the
+ template file for each symbol defined by @samp{AC_DEFINE} is changed to an
+@@ -3342,7 +3330,7 @@
+ probably use @samp{AH_BOTTOM} to append the @samp{#include} directive.
+
-@node autoheader Invocation
+@node autoheader
@subsection Using @command{autoheader} to Create @file{config.h.in}
@cindex @command{autoheader}
-@@ -5991,7 +5979,7 @@
- files will depend upon @command{bizarre-cc} being the C compiler. If
- for some reason the user runs @command{/configure} again, or if it is
+@@ -7424,7 +7412,7 @@
+ And finally, the default for @var{action-if-universal} is to ensure that
+ @samp{WORDS_BIGENDIAN} is defined if and only if a universal build is
+ detected and the current code is big-endian; this default works only if
+-@command{autoheader} is used (@pxref{autoheader Invocation}).
++@command{autoheader} is used (@pxref{autoheader}).
+
+ If you use this macro without specifying @var{action-if-universal}, you
+ should also use @code{AC_CONFIG_HEADERS}; otherwise
+@@ -8013,10 +8001,8 @@
+ @code{ac_cv_f77_libs} or @code{ac_cv_fc_libs}, respectively.
+ @end defmac
+
+-@defmac AC_F77_DUMMY_MAIN (@ovar{action-if-found}, @dvar{action-if-not-found, @
+- AC_MSG_FAILURE})
+-@defmacx AC_FC_DUMMY_MAIN (@ovar{action-if-found}, @dvar{action-if-not-found, @
+- AC_MSG_FAILURE})
++@defmac AC_F77_DUMMY_MAIN (@ovar{action-if-found}, @dvar{action-if-not-found, @AC_MSG_FAILURE})
++@defmacx AC_FC_DUMMY_MAIN (@ovar{action-if-found}, @dvar{action-if-not-found, @AC_MSG_FAILURE})
+ @acindex{F77_DUMMY_MAIN}
+ @cvindex F77_DUMMY_MAIN
+ @acindex{FC_DUMMY_MAIN}
+@@ -8201,10 +8187,8 @@
+ to call Fortran routines from some language other than C/C++.
+ @end defmac
+
+-@defmac AC_FC_SRCEXT (@var{ext}, @ovar{action-if-success}, @
+- @dvar{action-if-failure, AC_MSG_FAILURE})
+-@defmacx AC_FC_PP_SRCEXT (@var{ext}, @ovar{action-if-success}, @
+- @dvar{action-if-failure, AC_MSG_FAILURE})
++@defmac AC_FC_SRCEXT (@var{ext}, @ovar{action-if-success}, @@dvar{action-if-failure, AC_MSG_FAILURE})
++@defmacx AC_FC_PP_SRCEXT (@var{ext}, @ovar{action-if-success}, @@dvar{action-if-failure, AC_MSG_FAILURE})
+ @acindex{FC_SRCEXT}
+ @acindex{FC_PP_SRCEXT}
+ @caindex fc_srcext_@var{ext}
+@@ -8267,8 +8251,7 @@
+ @code{ac_cv_fc_pp_srcext_@var{ext}} variables, respectively.
+ @end defmac
+
+-@defmac AC_FC_PP_DEFINE (@ovar{action-if-success}, @dvar{action-if-failure, @
+- AC_MSG_FAILURE})
++@defmac AC_FC_PP_DEFINE (@ovar{action-if-success}, @dvar{action-if-failure, @AC_MSG_FAILURE})
+ @acindex{FC_PP_DEFINE}
+ @caindex fc_pp_define
+
+@@ -8286,8 +8269,7 @@
+ variable.
+ @end defmac
+
+-@defmac AC_FC_FREEFORM (@ovar{action-if-success}, @dvar{action-if-failure, @
+- AC_MSG_FAILURE})
++@defmac AC_FC_FREEFORM (@ovar{action-if-success}, @dvar{action-if-failure, @AC_MSG_FAILURE})
+ @acindex{FC_FREEFORM}
+ @caindex fc_freeform
+
+@@ -8313,8 +8295,7 @@
+ the @code{ac_cv_fc_freeform} variable.
+ @end defmac
+
+-@defmac AC_FC_FIXEDFORM (@ovar{action-if-success}, @dvar{action-if-failure, @
+- AC_MSG_FAILURE})
++@defmac AC_FC_FIXEDFORM (@ovar{action-if-success}, @dvar{action-if-failure, @AC_MSG_FAILURE})
+ @acindex{FC_FIXEDFORM}
+ @caindex fc_fixedform
+
+@@ -8375,10 +8356,8 @@
+ variable.
+ @end defmac
+
+-@defmac AC_F77_IMPLICIT_NONE (@ovar{action-if-success}, @
+- @dvar{action-if-failure, AC_MSG_FAILURE})
+-@defmacx AC_FC_IMPLICIT_NONE (@ovar{action-if-success}, @
+- @dvar{action-if-failure, AC_MSG_FAILURE})
++@defmac AC_F77_IMPLICIT_NONE (@ovar{action-if-success}, @@dvar{action-if-failure, AC_MSG_FAILURE})
++@defmacx AC_FC_IMPLICIT_NONE (@ovar{action-if-success}, @@dvar{action-if-failure, AC_MSG_FAILURE})
+ @acindex{F77_IMPLICIT_NONE}
+ @acindex{FC_IMPLICIT_NONE}
+ @caindex f77_implicit_none
+@@ -9914,7 +9893,7 @@
+ files depend upon @command{bizarre-cc} being the C compiler. If
+ for some reason the user runs @command{./configure} again, or if it is
run via @samp{./config.status --recheck}, (@xref{Automatic Remaking},
-and @pxref{config.status Invocation}), then the configuration can be
+and @pxref{config.status}), then the configuration can be
inconsistent, composed of results depending upon two different
compilers.
-@@ -6035,7 +6023,7 @@
+@@ -9967,7 +9946,7 @@
@item
@var{variable} is kept during automatic reconfiguration
line argument, including when no cache is used:
@example
-@@ -7162,7 +7150,7 @@
+@@ -11113,11 +11092,11 @@
+ It supports M4 extensions designed for use in tools like Autoconf.
+
+ @menu
+-* autom4te Invocation:: A GNU M4 wrapper
++* autom4te:: A GNU M4 wrapper
+ * Customizing autom4te:: Customizing the Autoconf package
+ @end menu
+
+-@node autom4te Invocation
++@node autom4te
+ @subsection Invoking @command{autom4te}
+
+ The command line arguments are modeled after M4's:
+@@ -11376,7 +11355,7 @@
not.
@end table
@item --preselect=@var{macro}
@itemx -p @var{macro}
-@@ -7575,7 +7563,7 @@
+@@ -11464,8 +11443,8 @@
+ wrapped in between a @samp{begin-language: "@var{language}"},
+ @samp{end-language: "@var{language}"} pair.
+
+-Customizing a language stands for appending options (@pxref{autom4te
+-Invocation}) to the current definition of the language. Options, and
++Customizing a language stands for appending options (@pxref{autom4te})
++to the current definition of the language. Options, and
+ more generally arguments, are introduced by @samp{args:
+ @var{arguments}}. You may use the traditional shell syntax to quote the
+ @var{arguments}.
+@@ -13793,8 +13772,7 @@
+ undefined if expansion of an indirect variable does not result in a
+ literal variable name.
+
+-@defmac AS_LITERAL_IF (@var{expression}, @ovar{if-literal}, @ovar{if-not}, @
+- @dvar{if-simple-ref, @var{if-not}})
++@defmac AS_LITERAL_IF (@var{expression}, @ovar{if-literal}, @ovar{if-not}, @@dvar{if-simple-ref, @var{if-not}})
+ @defmacx AS_LITERAL_WORD_IF (@var{expression}, @ovar{if-literal}, @
+ @ovar{if-not}, @dvar{if-simple-ref, @var{if-not}})
+ @asindex{LITERAL_IF}
+@@ -14446,7 +14424,7 @@
When the user runs @samp{autoconf -W error}, warnings from
- @code{AC_DIAGNOSE} and @code{AC_WARNING} are reported as error, see
--@ref{autoconf Invocation}.
-+@ref{autoconf}.
+ @code{m4_warn} (including those issued through @code{AC_DIAGNOSE} and
+-@code{AC_WARNING}) are reported as errors, see @ref{autoconf Invocation}.
++@code{AC_WARNING}) are reported as errors, see @ref{autoconf}.
@node Dependencies Between Macros
@section Dependencies Between Macros
-@@ -10555,7 +10543,7 @@
+@@ -22640,16 +22618,16 @@
* System Type:: Specifying the system type
* Sharing Defaults:: Setting site-wide defaults for @command{configure}
* Defining Variables:: Specifying the compiler etc.
@end menu
@set autoconf
-@@ -10564,7 +10552,7 @@
+ @include install.texi
- @c ============================================== Recreating a Configuration
+
+-@c ============================================== config.status Invocation
++@c ============================================== config.status
-@node config.status Invocation
+@node config.status
- @chapter Recreating a Configuration
+ @chapter config.status Invocation
@cindex @command{config.status}
-@@ -10698,7 +10686,7 @@
+@@ -22818,7 +22796,7 @@
@menu
- * Obsolete config.status Use:: Different calling convention
- * acconfig.h:: Additional entries in @file{config.h.in}
+ * Obsolete config.status Use:: Obsolete convention for @command{config.status}
+ * acconfig Header:: Additional entries in @file{config.h.in}
-* autoupdate Invocation:: Automatic update of @file{configure.ac}
+* autoupdate:: Automatic update of @file{configure.ac}
* Obsolete Macros:: Backward compatibility macros
* Autoconf 1:: Tips for upgrading your files
* Autoconf 2.13:: Some fresher tips
-@@ -10708,7 +10696,7 @@
+@@ -22828,7 +22806,7 @@
@section Obsolete @file{config.status} Invocation
@file{config.status} now supports arguments to specify the files to
--instantiate, see @ref{config.status Invocation}, for more details.
-+instantiate, see @ref{config.status}, for more details.
+-instantiate; see @ref{config.status Invocation}, for more details.
++instantiate; see @ref{config.status}, for more details.
Before, environment variables had to be used.
@defvar CONFIG_COMMANDS
-@@ -10739,7 +10727,7 @@
+@@ -22859,7 +22837,7 @@
@file{config.status} ignores this variable.
@end defvar
would be:
@example
-@@ -10813,7 +10801,7 @@
+@@ -22933,7 +22911,7 @@
self-contained, and should not depend upon @file{acconfig.h} etc.
@section Using @command{autoupdate} to Modernize @file{configure.ac}
@cindex @command{autoupdate}
-@@ -11660,7 +11648,7 @@
+@@ -24111,7 +24089,7 @@
If you have an @file{aclocal.m4} installed with Autoconf (as opposed to
in a particular package's source directory), you must rename it to
+@file{acsite.m4}. @xref{autoconf}.
If you distribute @file{install.sh} with your package, rename it to
- @file{install-sh} so @code{make} builtin rules won't inadvertently
-@@ -11715,7 +11703,7 @@
+ @file{install-sh} so @command{make} builtin rules don't inadvertently
+@@ -24166,7 +24144,7 @@
the documentation for them. @xref{Obsolete Macros}, for a table showing the
new names for the old macros. Use the @command{autoupdate} program to
convert your @file{configure.ac} to using the new macro names.
Some macros have been superseded by similar ones that do the job better,
but are not call-compatible. If you get warnings about calling obsolete
-@@ -12214,7 +12202,7 @@
+@@ -24703,7 +24681,7 @@
@menu
* Using an Autotest Test Suite:: Autotest and the user
- * Writing testsuite.at:: Autotest macros
+ * Writing Testsuites:: Autotest macros
-* testsuite Invocation:: Running @command{testsuite} scripts
+* testsuite:: Running @command{testsuite} scripts
* Making testsuite Scripts:: Using autom4te to create @command{testsuite}
@end menu
-@@ -12476,7 +12464,7 @@
+@@ -24765,7 +24743,7 @@
+
+ @itemize @bullet
+ @item a debugging script named @file{run} which reruns the test in
+-@dfn{debug mode} (@pxref{testsuite Invocation}). The automatic generation
++@dfn{debug mode} (@pxref{testsuite}). The automatic generation
+ of debugging scripts has the purpose of easing the chase for bugs.
+
+ @item all the files created with @code{AT_DATA}
+@@ -25125,8 +25103,7 @@
+ be a single shell word that expands into a single file name.
+ @end defmac
+
+-@defmac AT_CHECK (@var{commands}, @dvar{status, 0}, @ovar{stdout}, @
+- @ovar{stderr}, @ovar{run-if-fail}, @ovar{run-if-pass})
++@defmac AT_CHECK (@var{commands}, @dvar{status, 0}, @ovar{stdout}, @@ovar{stderr}, @ovar{run-if-fail}, @ovar{run-if-pass})
+ @defmacx AT_CHECK_UNQUOTED (@var{commands}, @dvar{status, 0}, @ovar{stdout}, @
+ @ovar{stderr}, @ovar{run-if-fail}, @ovar{run-if-pass})
+ @atindex{CHECK}
+@@ -25270,7 +25247,7 @@
@end defmac
@section Running @command{testsuite} Scripts
@cindex @command{testsuite}
-diff -Nur autoconf-2.53.orig/doc/install.texi autoconf-2.53/doc/install.texi
---- autoconf-2.53.orig/doc/install.texi Mon Mar 4 16:11:11 2002
-+++ autoconf-2.53/doc/install.texi Sat Mar 16 12:32:45 2002
-@@ -224,7 +224,7 @@
- overridden in the site shell script).
+@@ -25465,7 +25442,7 @@
+ An Autotest test suite is to be configured in @var{directory}. This
+ macro causes @file{@var{directory}/atconfig} to be created by
+ @command{config.status} and sets the default @code{AUTOTEST_PATH} to
+-@var{test-path} (@pxref{testsuite Invocation}).
++@var{test-path} (@pxref{testsuite}).
+ @end defmac
+ @item
+@@ -25858,7 +25835,7 @@
+ which can be a long process for complex @file{configure.ac}.
+
+ This is why all these tools, instead of running directly M4, invoke
+-@command{autom4te} (@pxref{autom4te Invocation}) which, while answering to
++@command{autom4te} (@pxref{autom4te}) which, while answering to
+ a specific demand, stores additional information in
+ @file{autom4te.cache} for future runs. For instance, if you run
+ @command{autoconf}, behind the scenes, @command{autom4te} also
+--- autoconf-2.62/doc/install.texi.orig 2007-12-08 14:58:52.000000000 +0100
++++ autoconf-2.62/doc/install.texi 2008-04-16 20:34:45.697178391 +0200
+@@ -239,7 +239,7 @@
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+ @end example
-@node configure Invocation
+@node configure
@section @command{configure} Invocation
@command{configure} recognizes the following options to control how it
-diff -Nur autoconf-2.53.orig/doc/standards.texi autoconf-2.53/doc/standards.texi
---- autoconf-2.53.orig/doc/standards.texi Fri Nov 2 17:29:03 2001
-+++ autoconf-2.53/doc/standards.texi Sat Mar 16 12:34:09 2002
-@@ -8,9 +8,10 @@
-
- @ifinfo
- @format
--START-INFO-DIR-ENTRY
--* Standards: (standards). GNU coding standards.
--END-INFO-DIR-ENTRY
+--- autoconf-2.62/doc/standards.texi.orig 2008-04-04 15:16:45.000000000 +0200
++++ autoconf-2.62/doc/standards.texi 2008-04-16 20:39:27.317224488 +0200
+@@ -6,9 +6,9 @@
+ @set lastupdate February 23, 2008
+ @c %**end of header
+
+-@dircategory GNU organization
+@dircategory Miscellaneous:
-+@direntry
-+* Standards: (standards). GNU coding standards.
-+@end direntry
- @end format
- @end ifinfo
+ @direntry
+-* Standards: (standards). GNU coding standards.
++* Standards: (standards). GNU coding standards
+ @end direntry
+ @c @setchapternewpage odd
projects / packages / autoconf.git / blobdiff