diff -Nur linux-2.6.15.6/drivers/input/joystick/iforce/iforce-serio.c linux-2.6.15.6.iforce/drivers/input/joystick/iforce/iforce-serio.c
--- linux-2.6.15.6/drivers/input/joystick/iforce/iforce-serio.c	2006-03-05 19:07:54.000000000 +0000
+++ linux-2.6.15.6.iforce/drivers/input/joystick/iforce/iforce-serio.c	2006-04-29 23:17:59.000000000 +0000
@@ -175,6 +175,12 @@
 		.id	= SERIO_ANY,
 		.extra	= SERIO_ANY,
 	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= 0x1f, // Trust ForceFeedback Race Master
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
 	{ 0 }
 };
 
--- linux-2.6.17/include/linux/skbuff.h~	2006-06-19 16:14:43.000000000 +0200
+++ linux-2.6.17/include/linux/skbuff.h	2006-06-19 16:57:47.000000000 +0200
@@ -19,6 +19,7 @@
 #include <linux/compiler.h>
 #include <linux/time.h>
 #include <linux/cache.h>
+#include <linux/ip.h>
 
 #include <asm/atomic.h>
 #include <asm/types.h>
--- linux-2.6.17/include/asm-ppc/io.h~	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.17/include/asm-ppc/io.h	2006-06-22 02:44:19.000000000 +0000
@@ -445,6 +445,10 @@
 #define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
 #define page_to_bus(page)	(page_to_phys(page) + PCI_DRAM_OFFSET)
 
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
 /* Enforce in-order execution of data I/O.
  * No distinction between read/write on PPC; use eieio for all three.
  */
--- linux-2.6.17.7.orig/drivers/media/dvb/ttpci/budget-av.c	2006-07-25 14:53:19.000000000 +0100
+++ linux-2.6.17.7/drivers/media/dvb/ttpci/budget-av.c	2006-07-25 15:25:32.000000000 +0100
@@ -58,6 +58,7 @@
 	struct tasklet_struct ciintf_irq_tasklet;
 	int slot_status;
 	struct dvb_ca_en50221 ca;
+	u8 reinitialise_demod:1;
 };
 
 /* GPIO Connections:
@@ -214,8 +215,9 @@
 	while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
 		msleep(100);
 
-	/* reinitialise the frontend */
-	dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
+	/* reinitialise the frontend if necessary */
+	if (budget_av->reinitialise_demod)
+		dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
 
 	if (timeout <= 0)
 	{
@@ -1064,12 +1066,10 @@
 		fe = tda10021_attach(&philips_cu1216_config,
 				     &budget_av->budget.i2c_adap,
 				     read_pwm(budget_av));
-		if (fe) {
-			fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
-		}
 		break;
 
 	case SUBID_DVBC_KNC1_PLUS:
+		budget_av->reinitialise_demod = 1;
 		fe = tda10021_attach(&philips_cu1216_config,
 				     &budget_av->budget.i2c_adap,
 				     read_pwm(budget_av));