diff -Nur freenx-server-0.7.2.orig/node.conf.sample freenx-server-0.7.2.freenx-node-conf/node.conf.sample
--- freenx-server-0.7.2.orig/node.conf.sample	2008-03-14 22:47:47.000000000 +0100
+++ freenx-server-0.7.2.freenx-node-conf/node.conf.sample	2008-08-16 21:05:52.000000000 +0200
@@ -460,7 +460,13 @@
 
 # The key that contains the name of the complete path of command name
 # 'xauth'.
-#COMMAND_XAUTH=/usr/X11R6/bin/xauth
+COMMAND_XAUTH=xauth
+
+COMMAND_XSET=xset
+
+COMMAND_XMODMAP=xmodmap
+
+COMMAND_XKBCOMP=xkbcomp
 
 # The key that contains the name of the complete path of command name
 # 'smbmount'.
@@ -479,7 +485,7 @@
 #COMMAND_SMBUMOUNT_CIFS=/sbin/umount.cifs
 
 # The key that contains the name of the complete path of the 'netcat' command.
-#COMMAND_NETCAT=netcat
+COMMAND_NETCAT=nc
 
 # The key that contains the name of the complete path of the 'ssh' and
 # 'ssh-keygen' command.
@@ -545,7 +551,7 @@
 # for examples of useful parameters.
 #AGENT_EXTRA_OPTIONS_RFB=""
 #AGENT_EXTRA_OPTIONS_RDP=""
-#AGENT_EXTRA_OPTIONS_X=""
+AGENT_EXTRA_OPTIONS_X="-fp /usr/share/fonts/misc/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,/usr/share/fonts/Type1/,/usr/share/fonts/TTF/"
 
 # The number of seconds we wait for the nxagent to start before
 # deciding startup has failed
@@ -567,6 +573,8 @@
 # Extra options to nxproxy. See !M documentation for useful parameters.
 #PROXY_EXTRA_OPTIONS=""
 
+APPLICATION_LIBRARY_PRELOAD="/usr/lib/libX11-nx.so.6:/usr/lib/libXext-nx.so.6:/usr/lib/libXcomp.so.2:/usr/lib/libXcompext.so.2:/usr/lib/libXrender-nx.so.1"
+
 # In case you want to use an external 'rdesktop' command
 # set this to "1".
 # 
diff -Nur freenx-server-0.7.2.orig/node.conf.sample.orig freenx-server-0.7.2.freenx-node-conf/node.conf.sample.orig
--- freenx-server-0.7.2.orig/node.conf.sample.orig	1970-01-01 01:00:00.000000000 +0100
+++ freenx-server-0.7.2.freenx-node-conf/node.conf.sample.orig	2008-03-14 22:47:47.000000000 +0100
@@ -0,0 +1,585 @@
+# node.conf
+#
+# This file is provided by FreeNX. It should be placed either into
+# /etc/nxserver/node.conf (FreeNX style) or /usr/NX/etc/node.conf
+# (NoMachine NX style).
+#
+# It is mostly compatible with NoMachine node.conf. The most important 
+# difference is that no spaces are allowed when assigning values (eg 
+# "A=value" is allowed, "A = value" is NOT).
+#
+# This file is sourced by bash, so you can do some fancy stuff here if you
+# want to, but be aware that it is sourced 3 times per connection. If you 
+# want autostart stuff, set NODE_AUTOSTART instead!
+# 
+#
+# You surely are aware that FreeNX is based on the fantastic results that
+# the hard work by NoMachine.com has achieved. NoMachine.com released the
+# core NX libraries under the GPL. The installation of these libs are the
+# precondition for all FreeNX scripts to work. If you are installing this
+# software with the help of one of the package management tools of your
+# Linux distribution, you can assume that this dependency is taken care of
+# by the tool.
+#
+# You have questions about the inner workings of the NX technology?
+#
+# Then you are recommended to first check out the rich and very detailed
+# NoMachine documentation and their online Knowledge Base at 
+#
+#           http://www.nomachine.com/kb/
+#
+# Other sources of information are the NoMachine mailing lists 
+# (nxusers@nomachine.com and nxdevelopers@nomachine.com):
+#
+#           http://www.nomachine.com/mailinglists.php
+#
+# The FreeNX (freenx-knx@kde.org) list is here:
+#
+#           https://mail.kde.org/mailman/listinfo/freenx-knx
+#
+# SVN: $Id$
+
+#########################################################################
+# General FreeNX directives
+#########################################################################
+
+# The host name which is used by NX server. It's should be used if it's
+# different than the default hostname (as returned by `hostname`)
+#SERVER_NAME="$(hostname)"
+
+# The port number where local 'sshd' is listening.
+#SSHD_PORT=22
+
+
+#########################################################################
+# Authentication / Security directives
+#########################################################################
+
+# Authentication directives
+
+# This adds the usermode to the possible authentication methods
+# Usermode means that a user can start the nxserver as his shell
+# and connect directly to the right server via a custom client.
+#ENABLE_USERMODE_AUTHENTICATION="0"
+
+# This adds the passdb to the possible authentication methods
+#ENABLE_PASSDB_AUTHENTICATION="1"
+
+# This adds SSH to the possible authentication methods. For it to work sshd
+# must be set up at localhost accepting password authentication.
+#ENABLE_SSH_AUTHENTICATION="1"
+
+# This adds SU to the possible authentication methods. For it to work the 
+# "nx" user must be in the wheel (RedHat, Fedora) or the users group (SUSE)
+# and the user logging in must have a valid shell that accepts the -c
+# parameter.
+#ENABLE_SU_AUTHENTICATION="0"
+
+# Require all users to be in the passdb, regardless of authentication method
+#ENABLE_USER_DB="0"
+
+
+# If enabled forces the user to use encryption. This will bail out
+# if the user does not have encryption enabled.
+#ENABLE_FORCE_ENCRYPTION="0"
+
+# Refuse the NX client connection if SSHD does not export the
+# SSH_CONNECTION and SSH_CLIENT variables in the environment
+# passed to the NX server.
+# 1: Will check the remote IP and will not accept the
+#    connection if it can't be determined.
+# 0: Will accept the connection even if the remote IP
+#    is not provided.
+#SSHD_CHECK_IP="0"
+
+# If ENABLE_SLAVE_MODE="1" the user will be just logged in _once_ and the 
+# communication is done via nxnode slave mode.
+#
+# This is useful for one time passwords or to have less traffic in utmp 
+# and wtmp.
+#
+# Also session startup times are much faster in slave mode. This is true especially 
+# if many printers or shares have to be added.
+#
+# For this to work the binary nxserver-helper has to be installed in 
+# PATH_BIN.
+#
+#ENABLE_SLAVE_MODE="0"
+
+#########################################################################
+# Restriction directives
+#########################################################################
+
+# The base display number from which sessions are started.
+#DISPLAY_BASE=1000
+
+# The maximum number of contemporary sessions that can be run on FreeNX
+#SESSION_LIMIT=200
+
+# The maximum number of contemporary sessions that a single user can run
+# on FreeNX. Defaults to the value of SESSION_LIMIT.
+#SESSION_USER_LIMIT=200
+
+# The number of displays reserved for sessions, it has to be greater or equal
+# to the maximum number of contemporary sessions that a server can run.
+#DISPLAY_LIMIT=200
+
+
+# User for which sessions should be persistent. Either the keyword "all" or a
+# comma-separated list of usernames or groups in the @groupname syntax.
+#ENABLE_PERSISTENT_SESSION="all"
+
+# Users and groups for whom persistent sessions should be disabled.
+# Especially useful if ENABLE_PERSISTENT_SESSION="all"
+#DISABLE_PERSISTENT_SESSION=""
+
+# This enables the mirroring of running sessions via VNC feature.
+# 
+# Session is marked as resumable and type is vnc-mirrored.
+# 
+#ENABLE_MIRROR_VIA_VNC=1
+
+# This enables the sharing of :0 via VNC feature.
+# 
+# Session is marked as resumable and type is vnc-local.
+# 
+# Note: You need to have the rights to access the display
+#       else it does not work.
+#
+#ENABLE_DESKTOP_SHARING=1
+
+#
+# Enable or disable clipboard:
+#
+# client:  The content copied on the client can be pasted inside the
+#            NX session.
+#
+# server: The content copied inside the NX session can be pasted
+#             on the client.
+#
+# both:    The copy&paste operations are allowed both between the
+#             client and the NX session and vice-versa.
+#
+# none:   The copy&paste operations between the client and the NX
+#            session are never allowed.
+#
+#ENABLE_CLIPBOARD="both"
+
+
+#
+# Enable or disable the pulldown dialog, which provides a graphical
+# way to suspend or terminate the rootless session:
+#
+# 1: Enabled. The pulldown menu is shown when the mouse pointer
+#     moves near the middle of the top boundary of a window and
+#     allows the user to suspend or terminate the session by means
+#     of an icon-click.
+#
+# 0: Disabled. The ctrl+alt+T key combination has to be issued
+#     to get the dialog for suspending or terminating the session.
+#
+#ENABLE_PULLDOWN_MENU="1"
+
+
+# The option USE_PROCESSOR_TASKSET is for setting the CPU affinity of all
+# nx related processes.
+#
+# Note: To have for example startkde run on even another core, just specify:
+#
+# COMMAND_STARTKDE="taskset -c 2 -- startkde"
+#
+# FreeNX runs this option like: $COMMAND_TASKSET -cp "$USE_PROCESSOR_TASKSET" $$
+# 
+# So with $USE_PROCESSOR_TASKSET set to 3,4 it would balance the tasks to cores
+# 3 and 4.
+#
+# If this option is empty, no balance to cores is done.
+#
+#USE_PROCESSOR_TASKSET=""
+
+# If you set ENABLE_ADVANCED_SESSION_CONTROL="1" you can start a new application in an already
+# running rootless session by using "add <rest of name>" as session name.
+#
+# Note: The client will return a message on that.
+#
+#ENABLE_ADVANCED_SESSION_CONTROL="0"
+
+# If you set ENABLE_SHOW_RUNNING_SESSIONS="0" then nxserver will only show
+# suspended sessions and you will not be able to resume or terminate a running 
+# session.
+#
+#ENABLE_SHOW_RUNNING_SESSIONS="1"
+
+#########################################################################
+# Logging directives
+#########################################################################
+
+# This directives controls the verbosity of the server-wide log.
+# 0: No Logging
+# 1: Errors
+# 2: Warnings
+# 3: Important information
+# 4: Server - Client communication
+# 5: Information
+# 6: Debugging information
+# 7: stderror of some applications
+#NX_LOG_LEVEL=0
+
+# By setting this to 0 the nxserver might be a bit faster, but passwords can be found in the log files.
+#NX_LOG_SECURE=1
+
+# Before turning logging on, please make sure that NX_LOGFILE is
+# writeable for the "nx" user
+#NX_LOGFILE=/var/log/nxserver.log
+
+# This directive controls if the temporary session directory
+# ($HOME/.nx/C-<hostname>-<display>-<session_id>) should be kept after a
+# session has ended. A successfully terminated session will be saved as
+# T-C-<hostname>-<display>-<session_id> while a failed session will be saved
+# as F-C-<hostname>-<display>-<session_id>.
+# The default is to cleanup the directories.
+#SESSION_LOG_CLEAN=1
+
+# Amount of seconds nxserver is to keep session history. The default of 2592000
+# is equivalent to 30 days. If this is 0 no session history will be kept
+# and a negative value denotes infinity.
+#SESSION_HISTORY=2592000
+
+
+#########################################################################
+# Forwarding directives
+#########################################################################
+
+# FreeNX with ENABLE_SERVER_FORWARD="1" will automatically forward all
+# connections to the host specified in SERVER_FORWARD_HOST with the
+# secret key SERVER_FORWARD_KEY.
+#
+# This allows to have a "chain" of NX Servers. Note that you will need to
+# use "SSL encryption" for all connections.
+
+#ENABLE_SERVER_FORWARD="0"
+#SERVER_FORWARD_HOST=""
+#SERVER_FORWARD_PORT=22
+#SERVER_FORWARD_KEY="/usr/NX/share/client.id_dsa.key"
+
+
+# FreeNX with ENABLE_NOMACHINE_FORWARD_PORT="1" will automatically forward all
+# connections to the commercial NoMachine nxserver installed on the same
+# machine, which go in by port NOMACHINE_FORWARD_PORT. This feature is introduced
+# to enable the usage of FreeNX and NoMachine NX side by side on the same machine
+# without conflicts.
+#
+# Note: You need to let SSHD listen to several ports to make use of this
+#       directive.
+
+#ENABLE_NOMACHINE_FORWARD_PORT="0"
+#NOMACHINE_FORWARD_PORT="22"
+
+#NOMACHINE_SERVER="/usr/NX/bin/nxserver"
+#NOMACHINE_NX_HOME_DIR="/usr/NX/home/nx"
+
+
+# LOAD BALANCING
+# ==============
+#
+# To do load balancing setup some hosts in LOAD_BALANCE_SERVERS and
+# make:
+#
+#   - either sure that all incoming connections are sent to the master
+#     server by using forwarding directives on the "slave" servers.
+#
+#   - or share the session database space via NFS between the servers.
+#     (not recommended at the moment as race conditions for DISPLAYs can 
+#      occur)
+#
+
+#LOAD_BALANCE_SERVERS=""
+
+# The following load_balance_algorithms are available at the moment:
+#
+# "load", "round-robin", "random"
+#
+# For "load" you need a script called nxcheckload in PATH_BIN.
+# 
+# A sample script, which you can change to your needs it shipped with
+# FreeNX under the name nxcheckload.sample.
+
+#LOAD_BALANCE_ALGORITHM="random"
+
+# By setting ENABLE_LOADBALANCE="1" you can let users choose their
+# preferred host, while being forwarded to another server. Of course
+# this is just a preference. The loadbalancing algorithm can completely
+# choose to ignore the users choice.
+
+#ENABLE_LOAD_BALANCE_PREFERENCE="0"
+
+#########################################################################
+# Services directives
+#########################################################################
+
+# FreeNX with ENABLE_ESD_PRELOAD="1" will automatically try to setup
+# the sound with the help of the esd media helper.
+#
+# Currently ESD will be used just by the Windows NX Client.
+#
+# Be sure that $ESD_BIN_PRELOAD is in your path, does exist and work
+# before enabling this directive.
+
+#ENABLE_ESD_PRELOAD="0"
+#ESD_BIN_PRELOAD="esddsp"
+
+# FreeNX with ENABLE_ARTSD_PRELOAD="1" will automatically try to setup
+# the sound with the help of the artsd media helper.
+#
+# Currently ARTSD will be used just by the Linux NX Client.
+#
+# Be sure that $ARTSD_BIN_PRELOAD is in your path, does exist and work
+# before enabling this directive.
+
+#ENABLE_ARTSD_PRELOAD="0"
+#ARTSD_BIN_PRELOAD="artsdsp"
+
+# FreeNX with ENABLE_KDE_CUPS="1" will automatically write 
+# $KDE_PRINTRC and put the current used socket into it.
+#
+# If you additionally enable ENABLE_KDE_CUPS_DYNAMIC it will set the 
+# Host entry to the script nxcups-gethost, which dynamically tries all 
+# possible entries to find the current printing host.
+#
+# The order is: CUPS_SERVER (env var), ~/.cups/client.conf, $KDE_PRINTRC,
+#               $CUPS_DEFAULT_SOCK, localhost
+#
+# So this option is most useful with ENABLE_CUPS_SERVER_EXPORT="1".
+# 
+# $KDE_PRINTRC is automatically calculated if its not set.
+
+#ENABLE_KDE_CUPS="0"
+#ENABLE_KDE_CUPS_DYNAMIC="0"
+#KDE_PRINTRC="$KDEHOME/share/config/kdeprintrc"
+
+# FreeNX with ENABLE_CUPS_SERVER_EXPORT="1" will automatically
+# export the environment variable CUPS_SERVER.
+
+#ENABLE_CUPS_SERVER_EXPORT="1"
+
+# FreeNX with ENABLE_CUPS_SEAMLESS will automatically try to download the 
+# necessary ppds from the client.
+# 
+# As the forwarding is just active as soon as nxagent is started,
+# we need a small delay of $CUPS_SEAMLESS_DELAY.
+#
+# Note: You need to use a patched cupsd on client side.
+
+#ENABLE_CUPS_SEAMLESS="0"
+#CUPS_SEAMLESS_DELAY="10"
+
+# FreeNX with ENABLE_FOOMATIC will integrate the foomatic db to the list
+# of available ppd drivers via the $COMMAND_FOOMATIC command.
+
+#ENABLE_FOOMATIC="1"
+#COMMAND_FOOMATIC="/usr/lib/cups/driver/foomatic-ppdfile"
+
+# CUPS_BACKEND and CUPS_ETC are the corresponding paths of your CUPS 
+# installation.
+
+#CUPS_BACKEND="/usr/lib/cups/backend"
+#CUPS_IPP_BACKEND="$CUPS_BACKEND/nxipp"
+#CUPS_DEFAULT_SOCK="/var/run/cups/cups.sock"
+#CUPS_ETC="/etc/cups"
+
+# SAMBA_MOUNT_SHARE_PROTOCOL is a key to configure the supported 
+# protocols for mounting shares.
+#
+# This key can be set to the following values:
+#
+# both, either SMB and CIFS protocol are supported, this is the default value.
+# smbfs, only SMB protocol is supported.
+# cifs, only CIFS protocol is supported.
+# none, no network file-sharing protocol is supported.
+
+#SAMBA_MOUNT_SHARE_PROTOCOL="both"
+
+# FreeNX with ENABLE_SAMBA_PRELOAD="1" will automatically setup
+# port 445 and 139 and forward them to the used samba port.
+#
+# This enables samba browsing to the local subnet in for example 
+# konqueror.
+#
+#ENABLE_SAMBA_PRELOAD="0"
+
+#########################################################################
+# Path directives
+#########################################################################
+
+# USER_FAKE_HOME is the base directory for the .nx directory. Use this
+# parameter instead of the users home directory if $HOME is on a NFS share.
+# Note that this directory must be unique for every user! To accomplish this
+# it is recommended to include $USER in the path.
+#USER_FAKE_HOME=$HOME
+
+# Add the nx libraries to LD_LIBRARY_PATH before starting nx agents.
+# WARNING: This will NOT (and should not) affect applications. ONLY Disable
+# this if the nx libraries are in a standard system path (such as /usr/lib)!
+#SET_LD_LIBRARY_PATH="1"
+
+
+# The command binary for the default window manager. If set it is run when a
+# 'unix-custom' session is requested by the NX Client and an application
+# to run is specified. It defaults to empty (ie no WM is run).
+# If KILL_DEFAULT_X_WM is set the WM is terminated after the started 
+# application finishes. Else FreeNX will wait for the WM to complete.
+#DEFAULT_X_WM=""
+#KILL_DEFAULT_X_WM="1"
+
+# When a 'unix-default' session is requested by the client the user's X startup
+# script will be run if pressent and executable, otherwise the default X
+# session will be run.
+# Depending on distribution USER_X_STARTUP_SCRIPT might be .Xclients, .xinitrc
+# and .Xsession
+# Depending on distribution DEFAULT_X_SESSION might be /etc/X11/xdm/Xsession,
+# /etc/X11/Sessions/Xsession or /etc/X11/xinit/xinitrc
+#USER_X_STARTUP_SCRIPT=.Xclients
+#DEFAULT_X_SESSION=/etc/X11/xdm/Xsession
+
+# The key that contains the name of the script that starts a KDE session.
+# It's run when a 'unix-kde' session is requested by the client.
+#COMMAND_START_KDE=startkde
+
+# The key that contains the name of the script that starts a gnome session.
+# It's run when a 'unix-gnome' session is requested by the client.
+#COMMAND_START_GNOME=gnome-session
+
+# The key that contains the name of the script that starts a CDE session.
+# It's run when a 'unix-cde' session is requested by the client.
+#COMMAND_START_CDE=cdwm
+
+# The key that contains the name of the complete path of command name
+# 'xterm'. It is run when a unix "xterm" session is requested by the
+# client.
+#COMMAND_XTERM=xterm
+
+# The key that contains the name of the complete path of command name
+# 'xauth'.
+#COMMAND_XAUTH=/usr/X11R6/bin/xauth
+
+# The key that contains the name of the complete path of command name
+# 'smbmount'.
+#COMMAND_SMBMOUNT=smbmount
+
+# The key that contains the name of the complete path of command name
+# 'smbumount'.
+#COMMAND_SMBUMOUNT=smbumount
+
+# The key that contains the name of the complete path of command name
+# 'mount.cifs'.
+#COMMAND_SMBMOUNT_CIFS=/sbin/mount.cifs
+
+# The key that contains the name of the complete path of command name
+# 'umount.cifs'.
+#COMMAND_SMBUMOUNT_CIFS=/sbin/umount.cifs
+
+# The key that contains the name of the complete path of the 'netcat' command.
+#COMMAND_NETCAT=netcat
+
+# The key that contains the name of the complete path of the 'ssh' and
+# 'ssh-keygen' command.
+#COMMAND_SSH=ssh
+#COMMAND_SSH_KEYGEN=ssh-keygen
+
+# The key that contains the name of the complete path of the 'cupsd' command.
+#COMMAND_CUPSD=/usr/sbin/cupsd
+
+# The tool to generate md5sums with
+#COMMAND_MD5SUM="openssl md5"
+
+# The key that contains the name of the complete path of the 'rdesktop' command.
+#COMMAND_RDESKTOP=rdesktop
+
+# The key that contains the name of the complete path of the 'vncviewer' command.
+#COMMAND_VNCVIEWER=vncviewer
+
+# The key that contains the name of the complete path of the 'vncpasswd' command.
+# By default the builtin nxpasswd is used.
+#COMMAND_VNCPASSWD="$PATH_BIN/nxpasswd"
+
+# The key that contains the name of the complete path of the 'x11vnc' command.
+#COMMAND_X11VNC=x11vnc
+
+# The key that contains the name of the complete path of the 'taskset' command.
+#COMMAND_TASKSET=taskset
+
+#########################################################################
+# Misc directives
+#########################################################################
+
+# When you installed an old 1.5.0 NX Backend, set this to 1.
+#ENABLE_1_5_0_BACKEND="0"
+
+# When set to 1 this will automatically resume started sessions
+#ENABLE_AUTORECONNECT="0"
+
+# When set to 1 this will automatically resume started sessions
+# but only if an older client version is used
+#ENABLE_AUTORECONNECT_BEFORE_140="1"
+
+# When set to 1 exports NXUSERIP / NXSESSIONID in nxnode
+#EXPORT_USERIP="0"
+#EXPORT_SESSIONID="1"
+
+# This can be set to any executable, which is started after session startup
+# like: $NODE_AUTOSTART {start|restore}
+#NODE_AUTOSTART=""
+
+# When set to 1 will start nxagent in rootless mode.
+#ENABLE_ROOTLESS_MODE="1"
+
+# If enabled writes entries via the COMMAND_SESSREG program
+# into utmp/wtmp/lastlog database.
+# Note: You have to make sure that you add the nx user to the
+#       utmp or tty group or how its called on your system
+#       before this directive works.
+#ENABLE_USESSION="1"
+#COMMAND_SESSREG="sessreg"
+
+# Extra options sent to the different nx agents. See !M documentation
+# for examples of useful parameters.
+#AGENT_EXTRA_OPTIONS_RFB=""
+#AGENT_EXTRA_OPTIONS_RDP=""
+#AGENT_EXTRA_OPTIONS_X=""
+
+# The number of seconds we wait for the nxagent to start before
+# deciding startup has failed
+#AGENT_STARTUP_TIMEOUT="60"
+
+# The font server the agent will use. If set to "" no font server is used.
+# For this to do any good, the client has to have the same font server set
+# in /etc/X11/XF86Config
+#AGENT_FONT_SERVER=""
+
+# Disable or enable use of 'tcp nodelay' on proxy. Old versions of Linux
+# kernels have problems using this option on sockets that will cause a loss
+# of TCP connections. This option is not set by default to allow clients to
+# specify whether to enable or disable TCP nodelay. Setting this option to
+# the value of "0" NX proxy avoids using 'tcp nodelay' but it will cause a
+# loss of interaction in sessions.
+#PROXY_TCP_NODELAY=""
+
+# Extra options to nxproxy. See !M documentation for useful parameters.
+#PROXY_EXTRA_OPTIONS=""
+
+# In case you want to use an external 'rdesktop' command
+# set this to "1".
+# 
+# If nxdesktop cannot be found this is set automatically to "1".
+#ENABLE_EXTERNAL_NXDESKTOP="0"
+
+# This configuration variable determines if 'rdesktop' command should be run with -k keyboard option
+# or if the keyboard should be autodetected.
+#
+#ENABLE_EXTERNAL_NXDESKTOP_KEYBOARD="1"
+
+# In case you want to use an external 'nxviewer' command
+# set this to "1".
+# 
+# If nxviewer cannot be found this is set automatically to "1".
+#ENABLE_EXTERNAL_NXVIEWER="0"
diff -Nur freenx-server-0.7.2.orig/nxloadconfig freenx-server-0.7.2.freenx-node-conf/nxloadconfig
--- freenx-server-0.7.2.orig/nxloadconfig	2008-03-14 22:47:47.000000000 +0100
+++ freenx-server-0.7.2.freenx-node-conf/nxloadconfig	2008-08-16 21:06:34.000000000 +0200
@@ -58,7 +58,7 @@
 # Where can different nx components be found
 NX_DIR=/usr
 PATH_BIN=$NX_DIR/bin # if you change that, be sure to also change the public keys
-PATH_LIB=$NX_DIR/lib
+PATH_LIB=$NX_DIR/lib/NX
 NX_ETC_DIR=/etc/nxserver
 NX_SESS_DIR=/var/lib/nxserver/db
 NX_HOME_DIR=/var/lib/nxserver/home