diff -urN cdrtools-1.11.orig/README.ATAPI cdrtools-1.11/README.ATAPI --- cdrtools-1.11.orig/README.ATAPI Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/README.ATAPI Wed Nov 27 13:12:13 2002 @@ -464,14 +464,14 @@ ln -s scd1 cdrw # NOTE: see above, maybe cdrom Check the new SCSI settings: cdrecord -scanbus - Setup cdrecord's environment - edit /etc/default/cdrecord: + Setup cdrecord's environment - edit /etc/cdrecord.conf: CDR_DEVICE=cdrw cdrw=1,0,0 4 8m cdrom=1,2,0 0 0m Input the right values, the fields are described in the manpage of cdrecord. Alternatively, you may use this values as cdrecord-parameter or take a frontend with an own configuration - scheme, then you don't need to modify /etc/default/cdrecord. + scheme, then you don't need to modify /etc/cdrecord.conf 9. It's done! Insert a CD and try "cdrecord -v -toc" /*--------------------------------------------------------------------------*/ He had constant buffer underrun problems: diff -urN cdrtools-1.11.orig/README.linux cdrtools-1.11/README.linux --- cdrtools-1.11.orig/README.linux Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/README.linux Wed Nov 27 13:12:35 2002 @@ -169,7 +169,7 @@ If dev=0,0,0 does not work but -dev=0,0,0 works you found this incompatibility. This problem is caused by an incompatibility in ctype.h and it seems that there are other compatibility problems - e.g. with reading /etc/default/cdrecord. + e.g. with reading /etc/cdrecord.conf You cannot copy binaries between different Linux versions, always compile the sources by yourself. diff -urN cdrtools-1.11.orig/README.openserver cdrtools-1.11/README.openserver --- cdrtools-1.11.orig/README.openserver Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/README.openserver Wed Nov 27 13:13:13 2002 @@ -55,7 +55,7 @@ =================================================================== THE OLD ADDRESSING IS NO LONGER AVAILABLE! - PLEASE ADJUST YOUR /etc/default/cdrecord FILES! + PLEASE ADJUST YOUR /etc/cdrecord.conf FILES! =================================================================== Running cdrecord with the old address method will result in an error! diff -urN cdrtools-1.11.orig/README.unixware cdrtools-1.11/README.unixware --- cdrtools-1.11.orig/README.unixware Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/README.unixware Wed Nov 27 13:13:25 2002 @@ -64,7 +64,7 @@ =================================================================== THE OLD ADDRESSING IS NO LONGER AVAILABLE! - PLEASE ADJUST YOUR /etc/default/cdrecord FILES! + PLEASE ADJUST YOUR /etc/cdrecord.conf FILES! =================================================================== Running cdrecord with the old address method will result in an error! diff -urN cdrtools-1.11.orig/cdrecord/cdrecord.1 cdrtools-1.11/cdrecord/cdrecord.1 --- cdrtools-1.11.orig/cdrecord/cdrecord.1 Wed Nov 27 12:59:44 2002 +++ cdrtools-1.11/cdrecord/cdrecord.1 Wed Nov 27 13:15:14 2002 @@ -146,7 +146,7 @@ described below. .PP -If a file /etc/default/cdrecord exists, the parameter to the +If a file /etc/cdrecord.conf exists, the parameter to the .B dev= option may also be a drive name label in said file (see FILES section). @@ -621,7 +621,7 @@ .B dev= option does not contain the characters ',', '/', '@' or ':', it is interpreted as an label name that may be found in the file -/etc/default/cdrecord (see FILES section). +/etc/cdrecord.conf (see FILES section). .TP .BI gracetime= # Set the grace time before starting to write to @@ -1357,7 +1357,7 @@ .TP .B CDR_DEVICE This may either hold a device identifier that is suitable to the open -call of the SCSI transport library or a label in the file /etc/default/cdrecord. +call of the SCSI transport library or a label in the file /etc/cdrecord.conf .TP .B CDR_SPEED Sets the default speed value for writing (see also @@ -1413,8 +1413,8 @@ .SH FILES .TP -/etc/default/cdrecord -Default values can be set for the following options in /etc/default/cdrecord. +/etc/cdrecord.conf +Default values can be set for the following options in /etc/cdrecord.conf For example: .SM CDR_FIFOSIZE=8m or @@ -1423,7 +1423,7 @@ .TP CDR_DEVICE This may either hold a device identifier that is suitable to the open -call of the SCSI transport library or a label in the file /etc/default/cdrecord +call of the SCSI transport library or a label in the file /etc/cdrecord.conf that allows to identify a specific drive on the system. .TP CDR_SPEED diff -urN cdrtools-1.11.orig/cdrecord/cdrecord.dfl cdrtools-1.11/cdrecord/cdrecord.dfl --- cdrtools-1.11.orig/cdrecord/cdrecord.dfl Wed Nov 27 12:59:44 2002 +++ cdrtools-1.11/cdrecord/cdrecord.dfl Wed Nov 27 13:16:20 2002 @@ -1,6 +1,6 @@ #ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling # -# This file is /etc/default/cdrecord +# This file is /etc/cdrecord.conf # It contains defaults that are used if no command line option # or environment is present. # @@ -14,7 +14,7 @@ # Note that newer cdrecord versions do not default # to speed=1. For MMC compliant drives, the default # is to write at maximum speed, so it in general does -# not make sense to set up a default speed in /etc/default/cdrecord +# not make sense to set up a default speed in /etc/cdrecord.conf # #CDR_SPEED=40 diff -urN cdrtools-1.11.orig/cdrecord/defaults.c cdrtools-1.11/cdrecord/defaults.c --- cdrtools-1.11.orig/cdrecord/defaults.c Wed Nov 27 12:59:44 2002 +++ cdrtools-1.11/cdrecord/defaults.c Wed Nov 27 13:16:57 2002 @@ -53,7 +53,7 @@ * don't contribute work and don't give support, they are causing extra * work for me and this way slow down the cdrecord development. */ - return (defltopen("/etc/default/cdrecord")); + return (defltopen("/etc/cdrecord.conf")); } EXPORT void diff -urN cdrtools-1.11.orig/doc/cdrecord.man cdrtools-1.11/doc/cdrecord.man --- cdrtools-1.11.orig/doc/cdrecord.man Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/doc/cdrecord.man Wed Nov 27 13:18:06 2002 @@ -67,7 +67,7 @@ try the --ssccaannbbuuss option of ccddrreeccoorrdd described below. - If a file /etc/default/cdrecord exists, the parameter to + If a file /etc/cdrecord.conf exists, the parameter to the ddeevv== option may also be a drive name label in said file (see FILES section). @@ -438,7 +438,7 @@ If the argument to the ddeevv== option does not contain the characters ',', '/', '@' or ':', it is inter- preted as an label name that may be found in the - file /etc/default/cdrecord (see FILES section). + file /etc/cdrecord.man (see FILES section). ggrraacceettiimmee==_# Set the grace time before starting to write to _# @@ -1053,7 +1053,7 @@ This may either hold a device identifier that is suitable to the open call of the SCSI transport library or a label in the file - /etc/default/cdrecord. + /etc/cdrecord.conf CCDDRR__SSPPEEEEDD Sets the default speed value for writing (see also @@ -1092,16 +1092,16 @@ FFIILLEESS - /etc/default/cdrecord + /etc/cdrecord.conf Default values can be set for the following options - in /etc/default/cdrecord. For example: CDR_FIFOS- + in /etc/cdrecord.conf For example: CDR_FIFOS- IZE=8m or CDR_SPEED=2 CDR_DEVICE This may either hold a device identifier that is suitable to the open call of the SCSI transport library or a label in the - file /etc/default/cdrecord that allows to + file /etc/cdrecord.conf that allows to identify a specific drive on the system. CDR_SPEED diff -urN cdrtools-1.11.orig/doc/cdrecord.ps cdrtools-1.11/doc/cdrecord.ps --- cdrtools-1.11.orig/doc/cdrecord.ps Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/doc/cdrecord.ps Wed Nov 27 13:31:20 2002 @@ -290,7 +290,7 @@ (,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2 (\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 525.6 Q(ecord)-.18 E F0(described belo)2.5 E -.65(w.)-.25 G .114 -(If a \214le /etc/def)108 554.4 R .114(ault/cdrecord e)-.1 F .115 +(If a \214le /etc/cdr)108 554.4 R .114(ecord.conf e)-.1 F .115 (xists, the parameter to the)-.15 F F2(de)2.615 E(v=)-.15 E F0 .115 (option may also be a dri)2.615 F .415 -.15(ve n)-.25 H .115 (ame label in said).15 F(\214le \(see FILES section\).)108 566.4 Q(On) @@ -749,8 +749,8 @@ 556.8 R 1.047(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047 (option does not contain the characters ',)3.547 F 1.047 (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E -(preted as an label name that may be found in the \214le /etc/def)144 -568.8 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(gracetime=)108 +(preted as an label name that may be found in the \214le /etc/cdr)144 +568.8 Q(ecord.conf \(see FILES section\).)-.1 E F2(gracetime=)108 585.6 Q F1(#).48 E F0(Set the grace time before starting to write to)144 597.6 Q F1(#)2.5 E F0 2.5(seconds. V)3.4 F(alues belo)-1.11 E 2.5(w2s) -.25 G(econds are not allo)-2.5 E(wed.)-.25 E F2(timeout=)108 614.4 Q F1 @@ -1425,7 +1425,7 @@ /F3 10/Times-Bold@0 SF(CDR_DEVICE)108 297.6 Q F0 1.627 (This may either hold a de)144 309.6 R 1.628(vice identi\214er that is \ suitable to the open call of the SCSI transport)-.25 F -(library or a label in the \214le /etc/def)144 321.6 Q(ault/cdrecord.) +(library or a label in the \214le /etc/cdr)144 321.6 Q(ecord.conf) -.1 E F3(CDR_SPEED)108 338.4 Q F0(Sets the def)144 350.4 Q(ault speed v) -.1 E(alue for writing \(see also)-.25 E F3(\255speed)2.5 E F0 (option\).)2.5 E F3(CDR_FIFOSIZE)108 367.2 Q F0(Sets the def)144 379.2 Q @@ -1460,16 +1460,16 @@ (ote that the remote SCSI serv)-6.236 F(er)-.15 E .553(program name wil\ l be ignored if you log in using an account that has been created with \ a remote)144 561.6 R(SCSI serv)144 573.6 Q(er program as login shell.) --.15 E F2(FILES)72 602.4 Q F0(/etc/def)108 614.4 Q(ault/cdrecord)-.1 E +-.15 E F2(FILES)72 602.4 Q F0(/etc/cdr)108 614.4 Q(ecord.conf)-.1 E (Def)144 626.4 Q 3.227(ault v)-.1 F 3.227 -(alues can be set for the follo)-.25 F 3.228(wing options in /etc/def) --.25 F 5.728(ault/cdrecord. F)-.1 F 3.228(or e)-.15 F(xample:)-.15 E/F4 +(alues can be set for the follo)-.25 F 3.228(wing options in /etc/cdr) +-.25 F 5.728(ecord.conf F)-.1 F 3.228(or e)-.15 F(xample:)-.15 E/F4 9/Times-Roman@0 SF(CDR_FIFOSIZE=8m)144 638.4 Q F0(or)2.25 E F4 (CDR_SPEED=2)2.5 E F0(CDR_DEVICE)144 655.2 Q .262 (This may either hold a de)180 667.2 R .262 (vice identi\214er that is suitable to the open call of the SCSI trans-) --.25 F 1.418(port library or a label in the \214le /etc/def)180 679.2 R -1.418(ault/cdrecord that allo)-.1 F 1.418(ws to identify a speci\214c) +-.25 F 1.418(port library or a label in the \214le /etc/cdr)180 679.2 R +1.418(ecord.conf that allo)-.1 F 1.418(ws to identify a speci\214c) -.25 F(dri)180 691.2 Q .3 -.15(ve o)-.25 H 2.5(nt).15 G(he system.)-2.5 E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 143.345 (chilling V)-2.5 F(ersion 1.11a35)-1.11 E(12)191.505 E EP diff -urN cdrtools-1.11.orig/doc/readcd.man cdrtools-1.11/doc/readcd.man --- cdrtools-1.11.orig/doc/readcd.man Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/doc/readcd.man Wed Nov 27 13:21:04 2002 @@ -96,7 +96,7 @@ If the argument to the ddeevv== option does not contain the characters ',', '/', '@' or ':', it is inter- preted as an label name that may be found in the - file /etc/default/cdrecord (see FILES section). + file /etc/cdrecord.conf (see FILES section). ttiimmeeoouutt==_# Set the default SCSI command timeout value to _# diff -urN cdrtools-1.11.orig/doc/readcd.ps cdrtools-1.11/doc/readcd.ps --- cdrtools-1.11.orig/doc/readcd.ps Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/doc/readcd.ps Wed Nov 27 13:29:04 2002 @@ -330,8 +330,8 @@ 120 R 1.046(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047 (option does not contain the characters ',)3.547 F 1.047 (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E -(preted as an label name that may be found in the \214le /etc/def)144 -132 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q +(preted as an label name that may be found in the \214le /etc/cdr)144 +132 Q(ecord.conf \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q F1(#).48 E F0 .13(Set the def)144 160.8 R .13 (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F1(#)2.63 E F0 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1 diff -urN cdrtools-1.11.orig/doc/scgcheck.man cdrtools-1.11/doc/scgcheck.man --- cdrtools-1.11.orig/doc/scgcheck.man Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/doc/scgcheck.man Wed Nov 27 13:21:18 2002 @@ -90,7 +90,7 @@ If the argument to the ddeevv== option does not contain the characters ',', '/', '@' or ':', it is inter- preted as an label name that may be found in the - file /etc/default/cdrecord (see FILES section). + file /etc/cdrecord.conf (see FILES section). ttiimmeeoouutt==_# Set the default SCSI command timeout value to _# diff -urN cdrtools-1.11.orig/doc/scgcheck.ps cdrtools-1.11/doc/scgcheck.ps --- cdrtools-1.11.orig/doc/scgcheck.ps Wed Nov 27 12:59:43 2002 +++ cdrtools-1.11/doc/scgcheck.ps Wed Nov 27 13:31:49 2002 @@ -317,8 +317,8 @@ 1.047(gument to the)-.18 F/F1 10/Times-Bold@0 SF(de)3.547 E(v=)-.15 E F0 1.047(option does not contain the characters ',)3.547 F 1.047 (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E -(preted as an label name that may be found in the \214le /etc/def)144 96 -Q(ault/cdrecord \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2 +(preted as an label name that may be found in the \214le /etc/cdr)144 96 +Q(ecord.conf \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2 10/Times-Italic@0 SF(#).48 E F0 .13(Set the def)144 124.8 R .13 (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F2(#)2.63 E F0 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1 diff -urN cdrtools-1.11.orig/readcd/readcd.1 cdrtools-1.11/readcd/readcd.1 --- cdrtools-1.11.orig/readcd/readcd.1 Wed Nov 27 12:59:44 2002 +++ cdrtools-1.11/readcd/readcd.1 Wed Nov 27 13:22:11 2002 @@ -186,7 +186,7 @@ .B dev= option does not contain the characters ',', '/', '@' or ':', it is interpreted as an label name that may be found in the file -/etc/default/cdrecord (see FILES section). +/etc/cdrecord.conf (see FILES section). .TP .BI timeout= # Set the default SCSI command timeout value to diff -urN cdrtools-1.11.orig/scgcheck/scgcheck.1 cdrtools-1.11/scgcheck/scgcheck.1 --- cdrtools-1.11.orig/scgcheck/scgcheck.1 Wed Nov 27 12:59:44 2002 +++ cdrtools-1.11/scgcheck/scgcheck.1 Wed Nov 27 13:22:46 2002 @@ -170,7 +170,7 @@ .B dev= option does not contain the characters ',', '/', '@' or ':', it is interpreted as an label name that may be found in the file -/etc/default/cdrecord (see FILES section). +/etc/cdrecord.conf (see FILES section). .TP .BI timeout= # Set the default SCSI command timeout value to