1 diff -Nru samba-2.0.6/docs/manpages/nmbd.8 samba-2.0.6.new/docs/manpages/nmbd.8
2 --- samba-2.0.6/docs/manpages/nmbd.8 Thu Nov 11 03:52:15 1999
3 +++ samba-2.0.6.new/docs/manpages/nmbd.8 Sun Nov 28 21:04:26 1999
7 The default path to this file is compiled into Samba as part of the
8 -build process\&. Common defaults are \fI/usr/local/samba/lib/lmhosts\fP,
9 +build process\&. Common defaults are \fI/etc/samba/lmhosts\fP,
10 \fI/usr/samba/lib/lmhosts\fP or \fI/etc/lmhosts\fP\&. See the
11 \fBlmhosts (5)\fP man page for details on the contents of this file\&.
16 The default log file path is compiled into Samba as part of the
17 -build process\&. Common defaults are \fI/usr/local/samba/var/log\&.nmb\fP,
18 +build process\&. Common defaults are \fI/var/log/samba/log\&.nmb\fP,
19 \fI/usr/samba/var/log\&.nmb\fP or \fI/var/log/log\&.nmb\fP\&.
21 .IP "\fB-n primary NetBIOS name\fP"
24 .IP "\fB-s configuration file\fP"
25 The default configuration file name is
26 -set at build time, typically as \fI/usr/local/samba/lib/smb\&.conf\fP, but
27 +set at build time, typically as \fI/etc/samba/smb\&.conf\fP, but
28 this may be changed when Samba is autoconfigured\&.
30 The file specified contains the configuration details required by the
32 If running the server as a daemon at startup, this file will need to
33 contain an appropriate startup sequence for the server\&.
35 -\fB/usr/local/samba/lib/smb\&.conf\fP
36 +\fB/etc/samba/smb\&.conf\fP
38 This is the default location of the
39 \fBsmb\&.conf\fP server configuration
42 \fBnmbd\fP will accept SIGHUP, which will cause it to dump out it\'s
43 namelists into the file \f(CWnamelist\&.debug\fP in the
44 -\fI/usr/local/samba/var/locks\fP directory (or the \fIvar/locks\fP
45 +\fI/car/lock/samba/\fP directory (or the \fIvar/locks\fP
46 directory configured under wherever Samba was configured to install
47 itself)\&. This will also cause \fBnmbd\fP to dump out it\'s server database in
48 the log\&.nmb file\&. In addition, the debug log level of nmbd may be raised
49 diff -Nru samba-2.0.6/docs/manpages/smb.conf.5 samba-2.0.6.new/docs/manpages/smb.conf.5
50 --- samba-2.0.6/docs/manpages/smb.conf.5 Thu Nov 11 03:52:15 1999
51 +++ samba-2.0.6.new/docs/manpages/smb.conf.5 Sun Nov 28 21:02:43 1999
53 to special case the config files of just a few clients)\&.
56 -\f(CW config file = /usr/local/samba/lib/smb\&.conf\&.%m\fP
57 +\f(CW config file = /usr/etc/samba/smb\&.conf\&.%m\fP
62 \f(CW lock directory = /tmp/samba\fP
65 -\f(CW lock directory = /usr/local/samba/var/locks\fP
66 +\f(CW lock directory = /var/lock/samba\fP
68 .IP "\fBlocking (S)\fP"
71 separate log files for each user or machine\&.
74 -\f(CW log file = /usr/local/samba/var/log\&.%m\fP
75 +\f(CW log file = /var/log/samba/log\&.%m\fP
77 .IP "\fBlog level (G)\fP"
83 - preexec = csh -c \'echo \e"Welcome to %S!\e" | /usr/local/samba/bin/smbclient -M %m -I %I\' &
84 + preexec = csh -c \'echo \e"Welcome to %S!\e" | /usr/bin/smbclient -M %m -I %I\' &
89 \f(CW print command = lp -d%p -s %s; rm %s\fP
92 -\f(CW print command = /usr/local/samba/bin/myprintscript %p %s\fP
93 +\f(CW print command = /usr/local/bin/myprintscript %p %s\fP
95 .IP "\fBprint ok (S)\fP"
98 \f(CW smbrun=<compiled default>\fP
101 -\f(CW smbrun = /usr/local/samba/bin/smbrun\fP
102 +\f(CW smbrun = /usr/local/bin/smbrun\fP
104 .IP "\fBsocket address (G)\fP"
106 diff -Nru samba-2.0.6/docs/manpages/swat.8 samba-2.0.6.new/docs/manpages/swat.8
107 --- samba-2.0.6/docs/manpages/swat.8 Thu Nov 11 03:52:16 1999
108 +++ samba-2.0.6.new/docs/manpages/swat.8 Sun Nov 28 20:27:39 1999
111 Do NOT enable this option on a production server\&.
116 -After you compile SWAT you need to run \f(CW"make install"\fP to install the
117 -swat binary and the various help files and images\&. A default install
124 -/usr/local/samba/bin/swat
125 -/usr/local/samba/swat/images/*
126 -/usr/local/samba/swat/help/*
132 -.SH "INETD INSTALLATION"
134 -You need to edit your \f(CW/etc/inetd\&.conf\fP and \f(CW/etc/services\fP to
135 -enable \fBSWAT\fP to be launched via inetd\&.
137 -In \f(CW/etc/services\fP you need to add a line like this:
139 -\f(CWswat 901/tcp\fP
141 -Note for NIS/YP users - you may need to rebuild the NIS service maps
142 -rather than alter your local \f(CW/etc/services\fP file\&.
144 -the choice of port number isn\'t really important except that it should
145 -be less than 1024 and not currently used (using a number above 1024
146 -presents an obscure security hole depending on the implementation
147 -details of your \fBinetd\fP daemon)\&.
149 -In \f(CW/etc/inetd\&.conf\fP you should add a line like this:
151 -\f(CWswat stream tcp nowait\&.400 root /usr/local/samba/bin/swat swat\fP
153 -One you have edited \f(CW/etc/services\fP and \f(CW/etc/inetd\&.conf\fP you need
154 -to send a HUP signal to inetd\&. To do this use \f(CW"kill -1 PID"\fP where
155 -PID is the process ID of the inetd daemon\&.
159 To launch \fBswat\fP just run your favorite web browser and point it at
164 -\fB/etc/inetd\&.conf\fP
165 +\fB/etc/sysconfig/rc-inetd/swat\fP
167 -This file must contain suitable startup information for the
169 +This is rc-inetd service description file\&.
173 This file must contain a mapping of service name (e\&.g\&., swat) to
174 service port (e\&.g\&., 901) and protocol type (e\&.g\&., tcp)\&.
176 -\fB/usr/local/samba/lib/smb\&.conf\fP
177 +\fB/etc/samba/smb\&.conf\fP
179 This is the default location of the \fIsmb\&.conf\fP server configuration
180 -file that \fBswat\fP edits\&. Other common places that systems install
181 -this file are \fI/usr/samba/lib/smb\&.conf\fP and \fI/etc/smb\&.conf\fP\&.
182 +file that \fBswat\fP edits\&.
184 This file describes all the services the server is to make available
185 to clients\&. See \fBsmb\&.conf (5)\fP for more information\&.