1 Summary: Creates an initial ramdisk image for preloading modules
2 Summary(pl.UTF-8): Narzędzie do tworzenia inicjalnego ramdysku używanego przy starcie systemu
7 Group: Applications/System
8 Source0: %{name}-%{version}.tar.gz
9 # Source0-md5: 1e21a8b5dce839cba53547d881cacc38
10 BuildRequires: xmlto >= 0:0.0.18-1
12 Requires: busybox-initrd >= 1.00-0.rc3.2
17 Requires: rc-scripts >= 0.2.7
18 # without this softraid installations of PLD fail
19 Requires: mdadm-initrd >= 1.12.0-1
20 Requires: mktemp >= 1.5-8
22 Requires: pci-database >= 0.4
25 Conflicts: udev-initrd < 1:104
28 BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
31 Geninitrd creates filesystem images for use as initial ramdisk
32 (initrd) images. These ramdisk images are often used to preload the
33 block device modules (SCSI or RAID) needed to access the root
36 In other words, generic kernels can be built without drivers for any
37 SCSI adapters which load the SCSI driver as a module. Since the kernel
38 needs to read those modules, but in this case it isn't able to address
39 the SCSI adapter, an initial ramdisk is used. The initial ramdisk is
40 loaded by the operating system loader (normally LILO) and is available
41 to the kernel as soon as the ramdisk is loaded. The ramdisk image
42 loads the proper SCSI adapter and allows the kernel to mount the root
43 filesystem. The geninitrd program creates such a ramdisk using
44 information found in the /etc/modules.conf file.
46 %description -l pl.UTF-8
47 Geninitrd służy do tworzenia obrazu systemu plikowego używanego jako
48 inicjalny ramdysk (initrd), z którego przy starcie systemu są ładowane
49 moduły kernela z obsługą urządzeń których obsługa nie jest
50 wkompilowana w kernel. Zazwyczaj modułami ładowanymi z inicjalnego
51 systemu plikowego są sterowniki SCSI, IDE czy też RAID po to żeby w
52 dalszej części inicjacji systemu był możliwy dostęp do głównego
53 systemu plikowego (root fs).
55 Dzięki initrd jest możliwe używanie dystrybucyjnego kernela w którym
56 wkompilowana jest minimalna ilość obsługi różnych urządzeń, a reszta
57 kodu obsługi sterowników SCSI, IDE czy RAID jest doczytywana w trakcie
58 startu z initrd. Skrypt geninitrd generuje obraz ramdysku na podstawie
59 bieżących informacji zawartych w /etc/modules.conf.
68 rm -rf $RPM_BUILD_ROOT
71 DESTDIR=$RPM_BUILD_ROOT
74 rm -rf $RPM_BUILD_ROOT
77 %defattr(644,root,root,755)
79 %attr(755,root,root) /sbin/geninitrd
80 %dir %{_sysconfdir}/geninitrd
81 %{_sysconfdir}/geninitrd/functions
82 %config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/geninitrd