1 Summary: Creates an initial ramdisk image for preloading modules
2 Summary(pl): Narzêdzie do tworzenia inicjalnego ramdysku u¿ywanego przy starcie systemu
7 Group: Applications/System
8 Source0: ftp://ftp.pld-linux.org/people/arekm/software/%{name}-%{version}.tar.gz
9 # Source0-md5: 4c8d2cf6a17f69703a237d750b45d788
10 PreReq: rc-scripts >= 0.2.7
12 Requires: busybox-initrd >= 1.00-0.pre5.0
16 Requires: mktemp >= 1.5-8
18 Requires: pci-database >= 0.4
22 Conflicts: mdadm-initrd < 1.4.0-3
24 BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
27 Geninitrd creates filesystem images for use as initial ramdisk (initrd)
28 images. These ramdisk images are often used to preload the block
29 device modules (SCSI or RAID) needed to access the root filesystem.
31 In other words, generic kernels can be built without drivers for any
32 SCSI adapters which load the SCSI driver as a module. Since the kernel
33 needs to read those modules, but in this case it isn't able to address
34 the SCSI adapter, an initial ramdisk is used. The initial ramdisk is
35 loaded by the operating system loader (normally LILO) and is available
36 to the kernel as soon as the ramdisk is loaded. The ramdisk image
37 loads the proper SCSI adapter and allows the kernel to mount the root
38 filesystem. The geninitrd program creates such a ramdisk using
39 information found in the /etc/modules.conf file.
42 Geninitrd s³u¿y do tworzenia obrazu systemu plikowego u¿ywanego jako
43 inicjalny ramdysk (initrd), z którego przy starcie systemu s± ³adowane
44 modu³y kernela z obs³ug± urz±dzeñ których obs³uga nie jest
45 wkompilowana w kernel. Zazwyczaj modu³ami ³adowanymi z inicjalnego
46 systemu plikowego s± sterowniki SCSI, IDE czy te¿ RAID po to ¿eby w
47 dalszej czê¶ci inicjacji systemu by³ mo¿liwy dostêp do g³ównego
48 systemu plikowego (root fs).
50 Dziêki initrd jest mo¿liwe u¿ywanie dystrybucyjnego kernela w którym
51 wkompilowana jest minimalna ilo¶æ obs³ugi ró¿nych urz±dzeñ, a reszta
52 kodu obs³ugi sterowników SCSI, IDE czy RAID jest doczytywana w trakcie
53 startu z initrd. Skrypt geninitrd generuje obraz ramdysku na podstawie
54 bie¿±cych informacji zawartych w /etc/modules.conf.
60 rm -rf $RPM_BUILD_ROOT
63 BUILDROOT=$RPM_BUILD_ROOT
66 rm -rf $RPM_BUILD_ROOT
69 %defattr(644,root,root,755)
71 %attr(755,root,root) /sbin/geninitrd
72 %config(noreplace) %verify(not md5 size mtime) /etc/sysconfig/geninitrd