eagle-light.spec

   1
   2 # TODO:
   3 # - fix %files
   4 # - add libraries from homepage
   5 # - enhance description
   6
   7 %define         _ver    4.13r1
   8 Summary:        Eagle Layout Editor
   9 Summary(pl):    Edytor p³ytek drukowanych Eagle
  10 Name:           eagle-light
  11 Version:        4.13r1
  12 Release:        0.2
  13 License:        Freeware
  14 Group:          X11/Applications/Science
  15 Source0:        ftp://ftp.cadsoft.de/pub/program/%{_ver}/eagle-lin-eng-%{_ver}.tgz
  16 # Source0-md5:  c9607298d0c7ca1545397f996d14c1e8
  17 Source1:        %{name}.desktop
  18 URL:            http://www.cadsoft.de/freeware.htm/
  19 ExclusiveArch:  %{ix86}
  20 BuildRoot:      %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
  21
  22 %description
  23 Eagle Layout Editor. Limitations:
  24 - The useable board area is limited to 100 x 80 mm (4 x 3.2 inches).
  25 - Only two signal layers can be used (Top and Bottom).
  26 - The schematic editor can only create one sheet.
  27 To run Eagle, you need licence key. Freeware Licence key is in:
  28 /usr/share/eagle-light/bin/
  29
  30 %description -l pl
  31 Edytor p³ytek drukowanych Eagle Limity:
  32 - Obszar p³ytki jest ograniczony do 100 x 80 mm (4 x 3.2 cale)
  33 - Tylko dwa sygna³owe warstwy mog± byæ u¿ywane (wierzchnia i spodnia)
  34 - Edytor schematów mo¿e stworzyæ jeden arkusz
  35 Aby uruchomic Eagle, potrzebujesz klucz licencyjny. Klucz licencyjny
  36 Freeware znajduje siê w katalogu:
  37 /usr/share/eagle-light/bin/
  38
  39 %prep
  40 %setup -q -n eagle-lin-eng-%{version}
  41
  42 %install
  43 rm -rf $RPM_BUILD_ROOT
  44 install -d $RPM_BUILD_ROOT%{_datadir}/%{name}/{bin,cam,dru,lbr,projects/examples/{hexapod,singlesided,tutorial},scr,ulp} \
  45         $RPM_BUILD_ROOT%{_mandir}/man1 \
  46         $RPM_BUILD_ROOT%{_bindir} \
  47         $RPM_BUILD_ROOT%{_pixmapsdir} \
  48         $RPM_BUILD_ROOT%{_desktopdir}
  49 mv man/eagle.1 $RPM_BUILD_ROOT%{_mandir}/man1
  50 #mv bin/eagle $RPM_BUILD_ROOT%{_bindir}/eagle
  51 mv bin/eagle.xpm $RPM_BUILD_ROOT%{_pixmapsdir}
  52 install %{SOURCE1} $RPM_BUILD_ROOT%{_desktopdir}
  53 install bin/* $RPM_BUILD_ROOT%{_datadir}/%{name}/bin
  54 ln -s %{_datadir}/%{name}/bin/eagle $RPM_BUILD_ROOT%{_bindir}/eagle
  55 touch $RPM_BUILD_ROOT%{_datadir}/%{name}/bin/eagle.key
  56 install cam/* $RPM_BUILD_ROOT%{_datadir}/%{name}/cam
  57 install dru/* $RPM_BUILD_ROOT%{_datadir}/%{name}/dru
  58 install lbr/* $RPM_BUILD_ROOT%{_datadir}/%{name}/lbr
  59 install projects/DESCRIPTION $RPM_BUILD_ROOT%{_datadir}/%{name}/projects
  60 install projects/examples/hexapod/* $RPM_BUILD_ROOT%{_datadir}/%{name}/projects/examples/hexapod
  61 install projects/examples/singlesided/* $RPM_BUILD_ROOT%{_datadir}/%{name}/projects/examples/singlesided
  62 install projects/examples/tutorial/* $RPM_BUILD_ROOT%{_datadir}/%{name}/projects/examples/tutorial
  63 install scr/* $RPM_BUILD_ROOT%{_datadir}/%{name}/scr
  64 install ulp/* $RPM_BUILD_ROOT%{_datadir}/%{name}/ulp
  65
  66
  67 %clean
  68 rm -rf $RPM_BUILD_ROOT
  69
  70 %post
  71 umask 022
  72 if ! grep -qs '^%{_libdir}/%{name}$' /etc/ld.so.conf ; then
  73         echo "%{_libdir}/%{name}" >> /etc/ld.so.conf
  74 fi
  75 /sbin/ldconfig
  76
  77 %postun
  78 umask 022
  79 if [ "$1" = '0' ]; then
  80         grep -v '^%{_libdir}/%{name}$' /etc/ld.so.conf > /etc/ld.so.conf.new 2>/dev/null
  81         mv -f /etc/ld.so.conf.new /etc/ld.so.conf
  82 fi
  83 /sbin/ldconfig
  84
  85 %files
  86 %defattr(644,root,root,755)
  87 %doc doc/UPDATE doc/library.txt README
  88 %attr(755,root,root) %{_bindir}/*
  89 %attr(664,root,users) %{_datadir}/%{name}/bin/eagle.key
  90 %attr(755,root,root) %{_datadir}/%{name}/bin/eagle
  91 %{_datadir}/