1 diff -ruN cdrtools-2.0-/cdrecord/README.ATAPI cdrtools-2.0/cdrecord/README.ATAPI
2 --- cdrtools-2.0-/cdrecord/README.ATAPI Tue Dec 24 17:37:35 2002
3 +++ cdrtools-2.0/cdrecord/README.ATAPI Thu Dec 26 18:25:53 2002
5 ln -s scd1 cdrw # NOTE: see above, maybe cdrom
6 Check the new SCSI settings:
8 - Setup cdrecord's environment - edit /etc/default/cdrecord:
9 + Setup cdrecord's environment - edit /etc/cdrecord.conf:
13 Input the right values, the fields are described in the manpage
14 of cdrecord. Alternatively, you may use this values as
15 cdrecord-parameter or take a frontend with an own configuration
16 - scheme, then you don't need to modify /etc/default/cdrecord.
17 + scheme, then you don't need to modify /etc/cdrecord.conf
18 9. It's done! Insert a CD and try "cdrecord -v -toc"
19 /*--------------------------------------------------------------------------*/
20 He had constant buffer underrun problems:
21 diff -ruN cdrtools-2.0-/README.openserver cdrtools-2.0/README.openserver
22 --- cdrtools-2.0-/README.openserver Tue Jan 25 17:37:48 2000
23 +++ cdrtools-2.0/README.openserver Thu Dec 26 18:25:53 2002
25 ===================================================================
26 THE OLD ADDRESSING IS NO LONGER AVAILABLE!
28 - PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
29 + PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
30 ===================================================================
32 Running cdrecord with the old address method will result in an error!
33 diff -ruN cdrtools-2.0-/README.unixware cdrtools-2.0/README.unixware
34 --- cdrtools-2.0-/README.unixware Sun Mar 4 00:41:43 2001
35 +++ cdrtools-2.0/README.unixware Thu Dec 26 18:25:53 2002
37 ===================================================================
38 THE OLD ADDRESSING IS NO LONGER AVAILABLE!
40 - PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
41 + PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
42 ===================================================================
44 Running cdrecord with the old address method will result in an error!
45 diff -ruN cdrtools-2.0-/cdrecord/cdrecord.1 cdrtools-2.0/cdrecord/cdrecord.1
46 --- cdrtools-2.0-/cdrecord/cdrecord.1 Tue Dec 24 16:28:40 2002
47 +++ cdrtools-2.0/cdrecord/cdrecord.1 Thu Dec 26 18:25:53 2002
52 -If a file /etc/default/cdrecord exists, the parameter to the
53 +If a file /etc/cdrecord.conf exists, the parameter to the
55 option may also be a drive name label in said file (see FILES section).
59 option does not contain the characters ',', '/', '@' or ':',
60 it is interpreted as an label name that may be found in the file
61 -/etc/default/cdrecord (see FILES section).
62 +/etc/cdrecord.conf (see FILES section).
69 This may either hold a device identifier that is suitable to the open
70 -call of the SCSI transport library or a label in the file /etc/default/cdrecord.
71 +call of the SCSI transport library or a label in the file /etc/cdrecord.conf
74 Sets the default speed value for writing (see also
75 @@ -1417,8 +1417,11 @@
79 -/etc/default/cdrecord
80 -Default values can be set for the following options in /etc/default/cdrecord.
82 +Default values can be set for the following options in /etc/cdrecord.conf .
83 +Note that this path has been changed from standard location in cdrtools
84 +distribution (/etc/default/cdrecord) to be consistent with other packages
85 +which don't use /etc/default directory in general.
92 This may either hold a device identifier that is suitable to the open
93 -call of the SCSI transport library or a label in the file /etc/default/cdrecord
94 +call of the SCSI transport library or a label in the file /etc/cdrecord.conf
95 that allows to identify a specific drive on the system.
98 diff -ruN cdrtools-2.0-/cdrecord/cdrecord.dfl cdrtools-2.0/cdrecord/cdrecord.dfl
99 --- cdrtools-2.0-/cdrecord/cdrecord.dfl Sun Jul 7 23:56:21 2002
100 +++ cdrtools-2.0/cdrecord/cdrecord.dfl Thu Dec 26 18:25:53 2002
102 #ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling
104 -# This file is /etc/default/cdrecord
105 +# This file is /etc/cdrecord.conf
106 # It contains defaults that are used if no command line option
107 # or environment is present.
110 # Note that newer cdrecord versions do not default
111 # to speed=1. For MMC compliant drives, the default
112 # is to write at maximum speed, so it in general does
113 -# not make sense to set up a default speed in /etc/default/cdrecord
114 +# not make sense to set up a default speed in /etc/cdrecord.conf
118 diff -ruN cdrtools-2.0-/libcdrdeflt/cdrdeflt.c cdrtools-2.0/libcdrdeflt/cdrdeflt.c
119 --- cdrtools-2.0-/libcdrdeflt/cdrdeflt.c Wed Aug 14 19:52:00 2002
120 +++ cdrtools-2.0/libcdrdeflt/cdrdeflt.c Thu Dec 26 18:25:53 2002
122 * don't contribute work and don't give support, they are causing extra
123 * work for me and this way slow down the cdrecord development.
125 - return (defltopen("/etc/default/cdrecord"));
126 + return (defltopen("/etc/cdrecord.conf"));
130 diff -ruN cdrtools-2.0-/doc/cdrecord.man cdrtools-2.0/doc/cdrecord.man
131 --- cdrtools-2.0-/doc/cdrecord.man Tue Dec 24 16:54:52 2002
132 +++ cdrtools-2.0/doc/cdrecord.man Thu Dec 26 18:28:09 2002
134 try the -
\b-s
\bsc
\bca
\ban
\bnb
\bbu
\bus
\bs option of c
\bcd
\bdr
\bre
\bec
\bco
\bor
\brd
\bd described below.
137 - If a file /etc/default/cdrecord exists, the parameter to
138 + If a file /etc/cdrecord.conf exists, the parameter to
139 the d
\bde
\bev
\bv=
\b= option may also be a drive name label in said
140 file (see FILES section).
143 If the argument to the d
\bde
\bev
\bv=
\b= option does not contain
144 the characters ',', '/', '@' or ':', it is inter-
145 preted as an label name that may be found in the
146 - file /etc/default/cdrecord (see FILES section).
147 + file /etc/cdrecord.conf (see FILES section).
149 g
\bgr
\bra
\bac
\bce
\bet
\bti
\bim
\bme
\be=
\b=_
\b#
150 Set the grace time before starting to write to _
\b#
151 @@ -1057,7 +1057,7 @@
152 This may either hold a device identifier that is
153 suitable to the open call of the SCSI transport
154 library or a label in the file
155 - /etc/default/cdrecord.
158 C
\bCD
\bDR
\bR_
\b_S
\bSP
\bPE
\bEE
\bED
\bD
159 Sets the default speed value for writing (see also
160 @@ -1096,16 +1096,16 @@
164 - /etc/default/cdrecord
166 Default values can be set for the following options
167 - in /etc/default/cdrecord. For example: CDR_FIFOS-
168 + in /etc/cdrecord.conf For example: CDR_FIFOS-
169 IZE=8m or CDR_SPEED=2
172 This may either hold a device identifier
173 that is suitable to the open call of the
174 SCSI transport library or a label in the
175 - file /etc/default/cdrecord that allows to
176 + file /etc/cdrecord.conf that allows to
177 identify a specific drive on the system.
180 diff -ruN cdrtools-2.0-/doc/cdrecord.ps cdrtools-2.0/doc/cdrecord.ps
181 --- cdrtools-2.0-/doc/cdrecord.ps Tue Dec 24 16:55:27 2002
182 +++ cdrtools-2.0/doc/cdrecord.ps Thu Dec 26 18:26:59 2002
184 (,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2
185 (\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 525.6
186 Q(ecord)-.18 E F0(described belo)2.5 E -.65(w.)-.25 G .114
187 -(If a \214le /etc/def)108 554.4 R .114(ault/cdrecord e)-.1 F .115
188 +(If a \214le /etc/cdr)108 554.4 R .114(ecord.conf e)-.1 F .115
189 (xists, the parameter to the)-.15 F F2(de)2.615 E(v=)-.15 E F0 .115
190 (option may also be a dri)2.615 F .415 -.15(ve n)-.25 H .115
191 (ame label in said).15 F(\214le \(see FILES section\).)108 566.4 Q(On)
193 556.8 R 1.047(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
194 (option does not contain the characters ',)3.547 F 1.047
195 (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
196 -(preted as an label name that may be found in the \214le /etc/def)144
197 -568.8 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(gracetime=)108
198 +(preted as an label name that may be found in the \214le /etc/cdr)144
199 +568.8 Q(ecord.conf \(see FILES section\).)-.1 E F2(gracetime=)108
200 585.6 Q F1(#).48 E F0(Set the grace time before starting to write to)144
201 597.6 Q F1(#)2.5 E F0 2.5(seconds. V)3.4 F(alues belo)-1.11 E 2.5(w2s)
202 -.25 G(econds are not allo)-2.5 E(wed.)-.25 E F2(timeout=)108 614.4 Q F1
203 @@ -1430,8 +1430,8 @@
204 G(nstead.)-2.5 E/F3 10.95/Times-Bold@0 SF(ENVIR)72 309.6 Q(ONMENT)-.329
205 E F2(CDR_DEVICE)108 321.6 Q F0 1.628(This may either hold a de)144 333.6
206 R 1.628(vice identi\214er that is suitable to the open call of the SCSI\
207 - transport)-.25 F(library or a label in the \214le /etc/def)144 345.6 Q
208 -(ault/cdrecord.)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
209 + transport)-.25 F(library or a label in the \214le /etc/cdr)144 345.6 Q
210 +(ecord.conf)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
211 Q(ault speed v)-.1 E(alue for writing \(see also)-.25 E F2(\255speed)2.5
212 E F0(option\).)2.5 E F2(CDR_FIFOSIZE)108 391.2 Q F0(Sets the def)144
213 403.2 Q(ault size of the FIFO \(see also)-.1 E F2(fs=)2.5 E F0 2.5(#o)C
214 @@ -1465,16 +1465,16 @@
215 (ote that the remote SCSI serv)-6.236 F(er)-.15 E .553(program name wil\
216 l be ignored if you log in using an account that has been created with \
217 a remote)144 585.6 R(SCSI serv)144 597.6 Q(er program as login shell.)
218 --.15 E F3(FILES)72 626.4 Q F0(/etc/def)108 638.4 Q(ault/cdrecord)-.1 E
219 +-.15 E F3(FILES)72 626.4 Q F0(/etc/rec)108 638.4 Q(ecord.conf)-.1 E
220 (Def)144 650.4 Q 3.228(ault v)-.1 F 3.228
221 -(alues can be set for the follo)-.25 F 3.227(wing options in /etc/def)
222 --.25 F 5.727(ault/cdrecord. F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
223 +(alues can be set for the follo)-.25 F 3.227(wing options in /etc/rec)
224 +-.25 F 5.727(ecord.conf F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
225 9/Times-Roman@0 SF(CDR_FIFOSIZE=8m)144 662.4 Q F0(or)2.25 E F4
226 (CDR_SPEED=2)2.5 E F0(CDR_DEVICE)144 679.2 Q .261
227 (This may either hold a de)180 691.2 R .262
228 (vice identi\214er that is suitable to the open call of the SCSI trans-)
229 --.25 F 1.418(port library or a label in the \214le /etc/def)180 703.2 R
230 -1.418(ault/cdrecord that allo)-.1 F 1.418(ws to identify a speci\214c)
231 +-.25 F 1.418(port library or a label in the \214le /etc/rec)180 703.2 R
232 +1.418(ecord.conf that allo)-.1 F 1.418(ws to identify a speci\214c)
233 -.25 F(dri)180 715.2 Q .3 -.15(ve o)-.25 H 2.5(nt).15 G(he system.)-2.5
234 E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065
235 (chilling V)-2.5 F(ersion 2.0)-1.11 E(12)201.225 E EP
236 diff -ruN cdrtools-2.0-/doc/readcd.man cdrtools-2.0/doc/readcd.man
237 --- cdrtools-2.0-/doc/readcd.man Tue Dec 24 16:56:07 2002
238 +++ cdrtools-2.0/doc/readcd.man Thu Dec 26 18:25:53 2002
240 If the argument to the d
\bde
\bev
\bv=
\b= option does not contain
241 the characters ',', '/', '@' or ':', it is inter-
242 preted as an label name that may be found in the
243 - file /etc/default/cdrecord (see FILES section).
244 + file /etc/cdrecord.conf (see FILES section).
246 t
\bti
\bim
\bme
\beo
\bou
\but
\bt=
\b=_
\b#
247 Set the default SCSI command timeout value to _
\b#
248 diff -ruN cdrtools-2.0-/doc/readcd.ps cdrtools-2.0/doc/readcd.ps
249 --- cdrtools-2.0-/doc/readcd.ps Tue Dec 24 16:56:28 2002
250 +++ cdrtools-2.0/doc/readcd.ps Thu Dec 26 18:25:53 2002
252 120 R 1.046(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
253 (option does not contain the characters ',)3.547 F 1.047
254 (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
255 -(preted as an label name that may be found in the \214le /etc/def)144
256 -132 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
257 +(preted as an label name that may be found in the \214le /etc/cdr)144
258 +132 Q(ecord.conf \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
259 F1(#).48 E F0 .13(Set the def)144 160.8 R .13
260 (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F1(#)2.63 E F0
261 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
262 diff -ruN cdrtools-2.0-/doc/scgcheck.man cdrtools-2.0/doc/scgcheck.man
263 --- cdrtools-2.0-/doc/scgcheck.man Tue Dec 24 16:56:55 2002
264 +++ cdrtools-2.0/doc/scgcheck.man Thu Dec 26 18:25:53 2002
266 If the argument to the d
\bde
\bev
\bv=
\b= option does not contain
267 the characters ',', '/', '@' or ':', it is inter-
268 preted as an label name that may be found in the
269 - file /etc/default/cdrecord (see FILES section).
270 + file /etc/cdrecord.conf (see FILES section).
272 t
\bti
\bim
\bme
\beo
\bou
\but
\bt=
\b=_
\b#
273 Set the default SCSI command timeout value to _
\b#
274 diff -ruN cdrtools-2.0-/doc/scgcheck.ps cdrtools-2.0/doc/scgcheck.ps
275 --- cdrtools-2.0-/doc/scgcheck.ps Tue Dec 24 16:57:15 2002
276 +++ cdrtools-2.0/doc/scgcheck.ps Thu Dec 26 18:25:53 2002
278 1.047(gument to the)-.18 F/F1 10/Times-Bold@0 SF(de)3.547 E(v=)-.15 E F0
279 1.047(option does not contain the characters ',)3.547 F 1.047
280 (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
281 -(preted as an label name that may be found in the \214le /etc/def)144 96
282 -Q(ault/cdrecord \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
283 +(preted as an label name that may be found in the \214le /etc/cdr)144 96
284 +Q(ecord.conf \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
285 10/Times-Italic@0 SF(#).48 E F0 .13(Set the def)144 124.8 R .13
286 (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F2(#)2.63 E F0
287 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
288 diff -ruN cdrtools-2.0-/readcd/readcd.1 cdrtools-2.0/readcd/readcd.1
289 --- cdrtools-2.0-/readcd/readcd.1 Tue Dec 24 16:28:41 2002
290 +++ cdrtools-2.0/readcd/readcd.1 Thu Dec 26 18:25:53 2002
293 option does not contain the characters ',', '/', '@' or ':',
294 it is interpreted as an label name that may be found in the file
295 -/etc/default/cdrecord (see FILES section).
296 +/etc/cdrecord.conf (see FILES section).
300 diff -ruN cdrtools-2.0-/scgcheck/scgcheck.1 cdrtools-2.0/scgcheck/scgcheck.1
301 --- cdrtools-2.0-/scgcheck/scgcheck.1 Tue Dec 24 16:32:01 2002
302 +++ cdrtools-2.0/scgcheck/scgcheck.1 Thu Dec 26 18:25:53 2002
305 option does not contain the characters ',', '/', '@' or ':',
306 it is interpreted as an label name that may be found in the file
307 -/etc/default/cdrecord (see FILES section).
308 +/etc/cdrecord.conf (see FILES section).
311 Set the default SCSI command timeout value to