2 # - make it simply build...
3 # - make pre/post for apache
4 # - add all needed files to %files
5 %include /usr/lib/rpm/macros.perl
6 Summary: A high-performance, enterprise-grade system for backing up PCs
7 Summary(pl): Wysoko wydajny, profesjonalnej klasy system do kopii zapasowych z PC
12 Group: Networking/Utilities
13 Source0: http://dl.sourceforge.net/backuppc/BackupPC-%{version}.tar.gz
14 # Source0-md5: 4e201f00842c88cf241e0429643c6ec4
15 Patch0: %{name}-usernotexist.patch
16 URL: http://backuppc.sourceforge.net/
17 #BuildRequires: fakeroot
18 BuildRequires: perl-base
19 BuildRequires: perl-devel >= 1:5.6.0
20 BuildRequires: perl-Compress-Zlib
21 BuildRequires: perl-Digest-MD5
22 Requires: samba-client
23 # lets check if it's really needed
29 BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
31 %define _backuppcdir %{_datadir}/%{name}
34 BackupPC is disk based and not tape based. This particularity allows
35 features not found in any other backup solution:
36 - Clever pooling scheme minimizes disk storage and disk I/O. Identical
37 files across multiple backups of the same or different PC are stored
38 only once (using hard links), resulting in substantial savings in disk
39 storage and disk writes.
40 - Optional compression provides additional reductions in storage. CPU
41 impact of compression is low since only new files (those not already
42 in the pool) need to be compressed.
43 - A powerful http/cgi user interface allows administrators to view log
44 files, configuration, current status and allows users to initiate and
45 cancel backups and browse and restore files from backups very quickly.
46 - No client-side software is needed. On WinXX the SMB protocol is
47 used. On Linux or unix clients, rsync or tar (over ssh/rsh/NFS) can be
49 - Flexible restore options. Single files can be downloaded from any
50 backup directly from the CGI interface. Zip or Tar archives for
51 selected files or directories can also be downloaded from the CGI
53 - BackupPC supports mobile environments where laptops are only
54 intermittently connected to the network and have dynamic IP addresses
56 - Flexible configuration parameters allow multiple backups to be
57 performed in parallel.
58 - and more to discover in the manual...
61 BackupPC jest oparty na dyskach, a nie ta¶mach. Ta osobliwo¶æ daje
62 mo¿liwo¶ci, których nie maj± inne rozwi±zania problemu kopii
64 - Inteligentny schemat ¶ci±gania minimalizuje zajmowane miejsce i
65 ilo¶æ operacji wej¶cia/wyj¶cia na dysku. Takie same pliki s±
66 przechowywane tylko raz (przy u¿yciu twardych dowi±zañ), co daje
67 znacz±c± oszczêdno¶æ w miejscu na dysku i czasie zapisu.
68 - Opcjonalna kompresja pozwala na dalsze ograniczenie rozmiaru.
69 Obci±¿enie procesora jest ma³e, poniewa¿ tylko nowe pliki musz± byæ
71 - Potê¿ny interfejs u¿ytkownika HTTP/CGI pozwala administratorom
72 przegl±daæ pliki logów, konfiguracjê i aktualny stan oraz u¿ytkownikom
73 rozpoczynaæ lub przerywaæ tworzenie kopii oraz szybko przegl±daæ i
74 odtwarzaæ pliki z kopii zapasowych.
75 - Nie jest wymagane oprogramowanie po stronie klienta. Na WinXX
76 u¿ywany jest protokó³ SMB. Na klientach linuksowych lub uniksowych
77 mo¿na u¿ywaæ rsynca lub tara (po ssh/rsh/NFS).
78 - Dostêpne s± elastyczne opcje odzyskiwania. Mo¿na ¶ci±gaæ pojedyncze
79 pliki z kopii bezpo¶rednio z interfejsu CGI. Tak¿e archiwa zip lub tar
80 z wybranymi plikami lub katalogami mog± byæ ¶ci±gane z poziomu
82 - BackupPC obs³uguje ¶rodowiska przeno¶ne, gdzie laptopy s± pod³±czane
83 do sieci tylko z przerwami i maj± dynamiczne adresy IP (z DHCP).
84 - Elastyczna konfiguracja parametrów pozwala na wykonywanie wielu
86 - Wiele wiêcej mo¿na odkryæ w manualu...
89 %setup -q -n BackupPC-%{version}
93 sed -i -e 's#!/bin/perl#!%{__perl}#' configure.pl
94 sed -i -e 's#!/bin/perl#!%{__perl}#' {bin,cgi-bin,doc}/*
95 sed -i -e 's#!/bin/perl#!%{__perl}#' */src/*
96 sed -i -e 's#!/bin/perl#!%{__perl}#' */*/*/*.pm
98 pod2man --section=8 --center="BackupPC manual" doc/BackupPC.pod backuppc.8
99 perl -e "s/.IX Title.*/.SH NAME\nbackuppc \\- BackupPC manual/g" -p -i.tmp backuppc.8
102 rm -rf $RPM_BUILD_ROOT
103 install -d $RPM_BUILD_ROOT/etc/{rc.d/init.d,%{name},httpd/httpd.conf} \
104 $RPM_BUILD_ROOT%{_var}/lib/%{name}/pc/localhost
106 # Does not work, yet... some voodoo-magic is needed
107 #echo "y" | fakeroot DEBIANDEST=$RPM_BUILD_ROOT configure.pl
108 %{__perl} configure.pl \
110 --bin-path perl=%{__perl} \
111 --bin-path tar=/bin/tar \
112 --bin-path smbclient=%{_bindir}/smbclient \
113 --bin-path nmblookup=%{_bindir}/nmblookup \
114 --bin-path rsync=%{_bindir}/rsync \
115 --bin-path ping=/bin/ping \
116 --bin-path df=/bin/df \
117 --bin-path ssh=%{_bindir}/ssh \
118 --bin-path sendmail=%{_sbindir}/sendmail \
119 --bin-path hostname=/bin/hostname \
120 --bin-path split=%{_bindir}/split \
121 --bin-path cat=/bin/cat \
122 --bin-path gzip=/bin/gzip \
123 --bin-path bzip2=%{_bindir}/bzip2 \
124 --cgi-dir %{_datadir}/BackupPC/cgi-bin \
125 --data-dir %{_var}/lib/BackupPC \
126 --dest-dir $RPM_BUILD_ROOT \
127 --hostname localhost \
128 --html-dir %{_usr}/share/BackupPC/www/html \
129 --html-dir-url /BackupPC \
130 --install-dir %{_usr} \
132 # --config-path %{_sysconfdir}/backuppc \
134 #mv -f $RPM_BUILD_ROOT/var/lib/backuppc/conf/* $RPM_BUILD_ROOT%{_sysconfdir}/backuppc
135 #mv -f $RPM_BUILD_ROOT%{_datadir}/backuppc/cgi-bin/BackupPC_Admin $RPM_BUILD_ROOT%{_datadir}/backuppc/cgi-bin/index.cgi
136 #install conf/hosts $RPM_BUILD_ROOT%{_sysconfdir}/backuppc
137 #install debian/localhost.pl $RPM_BUILD_ROOT%{_sysconfdir}/backuppc
138 #install debian/apache.conf $RPM_BUILD_ROOT%{_sysconfdir}/httpd/httpd.conf/93_backuppc.conf
141 #rm -f $RPM_BUILD_ROOT%{_datadir}/backuppc/doc/*
142 #rmdir $RPM_BUILD_ROOT/var/lib/backuppc/conf
145 #cd $RPM_BUILD_ROOT%{_datadir}/backuppc/cgi-bin
149 rm -rf $RPM_BUILD_ROOT
152 %defattr(644,root,root,755)
154 #%attr(750,root,root) %dir %{_sysconfdir}/backuppc
155 #%config(noreplace) %verify(not md5 size mtime) %attr(640,root,root) %{_sysconfdir}/backuppc/*
156 #%config(noreplace) %verify(not md5 size mtime) %attr(640,root,root) %{_sysconfdir}/httpd/httpd.conf/93_backuppc.conf
157 #%attr(755,root,root) %{_bindir}/*
158 %attr(750,root,root) %dir %{_var}/lib/backuppc