]>
Commit | Line | Data |
---|---|---|
1 | #!/bin/sh | |
2 | # | |
3 | # /etc/rc.d/rc.sysinit - run once at boot time | |
4 | # $Id$ | |
5 | # | |
6 | # Taken in part from Miquel van Smoorenburg's bcheckrc. | |
7 | # | |
8 | ||
9 | # reasonable start values for bootsplash progress. | |
10 | export progress=0 | |
11 | export sscripts=45 | |
12 | export kscripts=45 | |
13 | ||
14 | # NLS | |
15 | if [ -r /etc/sysconfig/i18n ]; then | |
16 | . /etc/sysconfig/i18n | |
17 | [ -n "$LANG" ] && export LANG || unset LANG | |
18 | [ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE | |
19 | [ -n "$LC_COLLATE" ] && export LC_COLLATE || unset LC_COLLATE | |
20 | [ -n "$LC_MESSAGES" ] && export LC_MESSAGES || unset LC_MESSAGES | |
21 | [ -n "$LC_NUMERIC" ] && export LC_NUMERIC || unset LC_NUMERIC | |
22 | [ -n "$LC_MONETARY" ] && export LC_MONETARY || unset LC_MONETARY | |
23 | [ -n "$LC_TIME" ] && export LC_TIME || unset LC_TIME | |
24 | [ -n "$LC_ALL" ] && export LC_ALL || unset LC_ALL | |
25 | [ -n "$LANGUAGE" ] && export LANGUAGE || unset LANGUAGE | |
26 | [ -n "$LINGUAS" ] && export LINGUAS || unset LINGUAS | |
27 | fi | |
28 | ||
29 | # Read network config data | |
30 | if [ -r /etc/sysconfig/network ]; then | |
31 | . /etc/sysconfig/network | |
32 | else | |
33 | NETWORKING=no | |
34 | HOSTNAME=localhost | |
35 | fi | |
36 | ||
37 | CONSOLE_LOGLEVEL=1 | |
38 | ||
39 | # Read functions | |
40 | . /etc/rc.d/init.d/functions | |
41 | ||
42 | disable_selinux() { | |
43 | typeset _d selinuxfs _t _r | |
44 | ||
45 | while read _d selinuxfs _t _r; do | |
46 | [ "$_t" = "selinuxfs" ] && break | |
47 | done </proc/mounts | |
48 | echo "*** Warning -- SELinux is active" | |
49 | echo "*** Disabling security enforcement for system recovery." | |
50 | echo "*** Run 'setenforce 1' to reenable." | |
51 | echo "0" > $selinuxfs/enforce | |
52 | } | |
53 | ||
54 | relabel_selinux() { | |
55 | typeset _d selinuxfs _t _r | |
56 | ||
57 | while read _d selinuxfs _t _r; do | |
58 | [ "$_t" = "selinuxfs" ] && break | |
59 | done </proc/mounts | |
60 | echo " | |
61 | *** Warning -- SELinux relabel is required. *** | |
62 | *** Disabling security enforcement. *** | |
63 | *** Relabeling could take a very long time, *** | |
64 | *** depending on file system size. *** | |
65 | " | |
66 | echo "0" > $selinuxfs/enforce | |
67 | /sbin/fixfiles -F relabel > /dev/null 2>&1 | |
68 | rm -f /.autorelabel | |
69 | echo "*** Enabling security enforcement. ***" | |
70 | echo $SELINUX > $selinuxfs/enforce | |
71 | } | |
72 | ||
73 | # Remove duplicate entries from mtab (for vserver guest use only) | |
74 | clean_vserver_mtab() { | |
75 | :>/etc/mtab.clean | |
76 | while read device mountpoint line; do | |
77 | grep -qs "$mountpoint" /etc/mtab.clean || \ | |
78 | echo "$device $mountpoint $line" >> /etc/mtab.clean | |
79 | done < /etc/mtab | |
80 | cat /etc/mtab.clean > /etc/mtab | |
81 | rm -f /etc/mtab.clean | |
82 | } | |
83 | ||
84 | # Loads modules from /etc/modules, /etc/modules.X.Y and /etc/modules.X.Y.Z | |
85 | load_kernel_modules() { | |
86 | { | |
87 | local _x _y v _z | |
88 | read _x _y v _z | |
89 | old_IFS=$IFS | |
90 | IFS='.' | |
91 | set -- $v | |
92 | IFS=$old_IFS | |
93 | kernel="$1.$2" | |
94 | kerneleq="$1.$2.$3" | |
95 | } < /proc/version | |
96 | ||
97 | local module | |
98 | # Loop over every line in modules file | |
99 | ( \ | |
100 | grep -hvE '^(#|[[:blank:]]*$)' /etc/modules /etc/modules.$kernel /etc/modules.$kerneleq 2>/dev/null | |
101 | echo '' # make sure there is a LF at the end | |
102 | ) | while read module args; do | |
103 | [ -z "$module" ] && continue | |
104 | modprobe -s $module -- $args | |
105 | done | |
106 | } | |
107 | ||
108 | # boot logging to /var/log/boot.msg. install showconsole package to get it. | |
109 | if [ -x /sbin/blogd ] && ! is_no "$RC_BOOTLOG"; then | |
110 | RC_BOOTLOG=1 | |
111 | else | |
112 | RC_BOOTLOG= | |
113 | fi | |
114 | ||
115 | if ! is_yes "$VSERVER" ; then | |
116 | # we need /proc mounted before everything | |
117 | is_fsmounted proc /proc || mount -n -o gid=17 -t proc /proc /proc | |
118 | ||
119 | # Only read this once. | |
120 | cmdline=$(cat /proc/cmdline) | |
121 | ||
122 | # sysfs is also needed before any other things (under kernel > 2.5) | |
123 | if grep -q sysfs /proc/filesystems 2>/dev/null ; then | |
124 | is_fsmounted sysfs /sys || mount -n -o gid=17 -t sysfs sysfs /sys | |
125 | if [ "$(kernelver)" -ge "002006014" ] && \ | |
126 | grep -q securityfs /proc/filesystems 2>/dev/null ; then | |
127 | mount -n -o gid=17 -t securityfs securityfs /sys/kernel/security | |
128 | fi | |
129 | fi | |
130 | ||
131 | # selinux | |
132 | if grep -q selinuxfs /proc/filesystems 2>/dev/null && ! is_fsmounted selinuxfs /selinux; then | |
133 | mount -n -o gid=17 -t selinuxfs selinuxfs /selinux | |
134 | fi | |
135 | ||
136 | # PLD Linux LiveCD support | |
137 | if [ -x /etc/rc.d/rc.live ]; then | |
138 | /etc/rc.d/rc.live | |
139 | fi | |
140 | ||
141 | # Choose Hardware profile | |
142 | if [ -f /etc/sysconfig/hwprof ]; then | |
143 | . /etc/sysconfig/hwprof | |
144 | if is_yes "${HWPROFILES}" && [ -x /sbin/hwprofile -a -d /etc/sysconfig/hwprofiles/data ]; then | |
145 | mount -n / -o rw,remount | |
146 | /sbin/hwprofile -qf | |
147 | mount -n / -o ro,remount | |
148 | fi | |
149 | fi | |
150 | ||
151 | # Disable splash when requested | |
152 | [ -e /proc/splash ] && is_no "$BOOT_SPLASH" && echo "0" > /proc/splash | |
153 | ||
154 | # Check SELinux status | |
155 | selinuxfs=$(awk '/ selinuxfs / { print $2 }' /proc/mounts 2> /dev/null) | |
156 | SELINUX= | |
157 | if [ -n "$selinuxfs" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then | |
158 | if [ -r $selinuxfs/enforce ] ; then | |
159 | SELINUX=$(cat $selinuxfs/enforce) | |
160 | else | |
161 | # assume enforcing if you can't read it | |
162 | SELINUX=1 | |
163 | fi | |
164 | fi | |
165 | ||
166 | if [ -x /sbin/restorecon ] && is_fsmounted tmpfs /dev; then | |
167 | /sbin/restorecon -R /dev 2>/dev/null | |
168 | fi | |
169 | ||
170 | [ -z "${CONSOLETYPE}" ] && CONSOLETYPE="$(/sbin/consoletype)" | |
171 | ||
172 | if [ "$CONSOLETYPE" = "vt" -a -x /sbin/setsysfont ]; then | |
173 | /sbin/setsysfont | |
174 | fi | |
175 | fi | |
176 | ||
177 | ||
178 | # Print welcome message | |
179 | nls "\t\t\t%sPowered by %sPLD Linux Distribution%s" "$(termput setaf $CPOWEREDBY)" "$(termput setaf $CPLD)" "$(termput op)" | |
180 | if ! is_no "$RC_PROMPT"; then | |
181 | nls -n "\t\t Press %sI%s to enter interactive startup" "$(termput setaf $CI)" "$(termput op)" | |
182 | echo | |
183 | fi | |
184 | ||
185 | # Set the hostname | |
186 | if [ -z "${HOSTNAME}" ]; then | |
187 | show "$(nls 'Host:') $(hostname)" ; ok | |
188 | else | |
189 | run_cmd "$(nls 'Host:') ${HOSTNAME}" hostname ${HOSTNAME} | |
190 | fi | |
191 | ||
192 | # Set the NIS domain name | |
193 | if [ -n "$NISDOMAIN" ]; then | |
194 | run_cmd "$(nls 'NIS Domain:') ${NISDOMAIN}" domainname $NISDOMAIN | |
195 | else | |
196 | domainname "" | |
197 | fi | |
198 | ||
199 | if ! is_yes "$VSERVER"; then | |
200 | # Set console loglevel | |
201 | if [ -n "$CONSOLE_LOGLEVEL" ]; then | |
202 | /bin/dmesg -n $CONSOLE_LOGLEVEL | |
203 | fi | |
204 | ||
205 | if ! is_no "$START_UDEV"; then | |
206 | [ -x /sbin/start_udev ] && /sbin/start_udev | |
207 | fi | |
208 | ||
209 | # Unmount the initrd, if necessary | |
210 | if grep -q /initrd /proc/mounts 2>/dev/null && ! grep -q /initrd/loopfs /proc/mounts 2>/dev/null; then | |
211 | umount /initrd/dev 2>/dev/null | |
212 | umount /initrd | |
213 | /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1 | |
214 | fi | |
215 | ||
216 | # Start logging console output since we have all /dev stuff setup | |
217 | if [ "$RC_BOOTLOG" ]; then | |
218 | /sbin/blogd | |
219 | fi | |
220 | ||
221 | # cpuset support (mounted unconditionally, shouldn't be a problem) | |
222 | if grep -q cgroup /proc/filesystems 2>/dev/null ; then | |
223 | mount -n -t cgroup none /dev/cpuset -o cpuset,noprefix | |
224 | [ $? -eq 0 ] && echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent | |
225 | elif grep -q cpuset /proc/filesystems 2>/dev/null ; then | |
226 | mount -n -t cpuset none /dev/cpuset | |
227 | fi | |
228 | ||
229 | # Configure Linux kernel (initial configuration, some required modules still | |
230 | # may be missing). | |
231 | /sbin/sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1 | |
232 | ||
233 | # Set the system clock. | |
234 | ARC=0 | |
235 | SRM=0 | |
236 | UTC=0 | |
237 | ||
238 | if [ -f /etc/sysconfig/clock ]; then | |
239 | . /etc/sysconfig/clock | |
240 | ||
241 | # convert old style clock config to new values | |
242 | if [ "${CLOCKMODE}" = "GMT" ]; then | |
243 | UTC=true | |
244 | elif [ "${CLOCKMODE}" = "ARC" ]; then | |
245 | ARC=true | |
246 | fi | |
247 | fi | |
248 | ||
249 | if grep "system serial" /proc/cpuinfo 2>/dev/null | grep -q MILO 2>/dev/null ; then | |
250 | ARC=true | |
251 | fi | |
252 | ||
253 | CLOCKDEF="" | |
254 | CLOCKFLAGS="--hctosys" | |
255 | ||
256 | if is_yes "$UTC" ; then | |
257 | CLOCKFLAGS="$CLOCKFLAGS --utc" | |
258 | CLOCKDEF="$CLOCKDEF (utc)" | |
259 | else | |
260 | CLOCKFLAGS="$CLOCKFLAGS --localtime" | |
261 | CLOCKDEF="$CLOCKDEF (local)" | |
262 | fi | |
263 | ||
264 | if is_yes "$ARC" ; then | |
265 | CLOCKFLAGS="$CLOCKFLAGS -A" | |
266 | CLOCKDEF="$CLOCKDEF (arc)" | |
267 | fi | |
268 | ||
269 | if is_yes "$SRM" ; then | |
270 | CLOCKFLAGS="$CLOCKFLAGS -S" | |
271 | CLOCKDEF="$CLOCKDEF (srm)" | |
272 | fi | |
273 | ||
274 | # Check if timezone definition is available | |
275 | if [ -e /etc/localtime -a -e /dev/rtc ] ; then | |
276 | if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then | |
277 | show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok | |
278 | fi | |
279 | else | |
280 | TIME_SETUP_DELAYED=yes | |
281 | fi | |
282 | ||
283 | if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then | |
284 | # XXX might need modules dep | |
285 | # Device mapper & related initialization | |
286 | if ! grep -qF device-mapper /proc/devices; then | |
287 | modprobe dm-mod | |
288 | fi | |
289 | ||
290 | # but should do this before swapon? | |
291 | . /etc/rc.d/init.d/cryptsetup | |
292 | show "Starting disk encryption" | |
293 | init_crypto 0 && ok || fail | |
294 | fi | |
295 | ||
296 | # Start up swapping | |
297 | run_cmd "Activating swap partitions" swapon -a -e | |
298 | ||
299 | # Initialize USB controllers | |
300 | usb=0 | |
301 | if ! strstr "$cmdline" "nousb" && ! is_fsmounted usbfs /proc/bus/usb ; then | |
302 | aliases=$(/sbin/modprobe -c | awk '/^alias[\t ]+usb-controller/ { print $3 }') | |
303 | if [ -n "$aliases" -a "$aliases" != "off" ] ; then | |
304 | /sbin/modprobe -s -k usbcore | |
305 | for alias in $aliases ; do | |
306 | [ "$alias" = "off" ] && continue | |
307 | run_cmd "$(nls 'Initializing USB controller') ($alias)" /sbin/modprobe -s $alias | |
308 | done | |
309 | [ $? -eq 0 -a -n "$aliases" ] && usb=1 | |
310 | fi | |
311 | if grep -iq "usb" /proc/devices 2>/dev/null ; then | |
312 | usb=1 | |
313 | fi | |
314 | fi | |
315 | ||
316 | if [ "$usb" = "1" ] && ! is_fsmounted usbfs /proc/bus/usb ; then | |
317 | run_cmd "Mounting USB filesystem" mount -n -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb | |
318 | fi | |
319 | ||
320 | needusbstorage= | |
321 | if [ "$usb" = "1" ]; then | |
322 | needusbstorage=$(LC_ALL=C cat /proc/bus/usb/devices 2>/dev/null|grep -e "^I.*Cls=08" 2>/dev/null) | |
323 | if [ "$(kernelverser)" -lt "002006" ]; then | |
324 | LC_ALL=C grep -q 'hid' /proc/bus/usb/drivers 2>/dev/null || run_cmd "Initializing USB HID interface" modprobe hid 2> /dev/null | |
325 | mouseoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02" 2>/dev/null) | |
326 | kbdoutput=$(cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01" 2>/dev/null) | |
327 | if [ -n "$kbdoutput" ]; then | |
328 | run_cmd "Initializing USB keyboard" modprobe keybdev | |
329 | fi | |
330 | if [ -n "$mouseoutput" ]; then | |
331 | run_cmd "Initializing USB mouse" modprobe mousedev | |
332 | fi | |
333 | fi | |
334 | fi | |
335 | ||
336 | # Setup hdparm thing (if exists and is needed) | |
337 | if ! strstr "$cmdline" nohdparm; then | |
338 | [ -x /etc/rc.d/rc.hdparm ] && /etc/rc.d/rc.hdparm | |
339 | fi | |
340 | ||
341 | if [ -f /fastboot ] || strstr "$cmdline" "fastboot"; then | |
342 | fastboot=yes | |
343 | else | |
344 | fastboot= | |
345 | fi | |
346 | ||
347 | if [ -f /fsckoptions ]; then | |
348 | fsckoptions=$(cat /fsckoptions) | |
349 | else | |
350 | fsckoptions='' | |
351 | fi | |
352 | ||
353 | if [ -f /forcefsck ]; then | |
354 | fsckoptions="-f $fsckoptions" | |
355 | else | |
356 | # Obey the fs_passno setting for / (see fstab(5)) | |
357 | # - find the / entry | |
358 | # - make sure we have at least 6 fields | |
359 | _ROOTFS_PASSNO=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $6}' /etc/fstab) | |
360 | fi | |
361 | ||
362 | _RUN_QUOTACHECK=0 | |
363 | _ROOTFS_DEVICE=$(awk '($1 !~ /^#/ && $2 == "/" && NF >= 6) { print $1}' /etc/fstab) | |
364 | _ROOTFS_TYPE=$(awk '$2 == "/" && $3 != "rootfs" { print $3 }' /proc/mounts 2>/dev/null) | |
365 | ||
366 | if [ -z "$fastboot" -a "$_ROOTFS_TYPE" != "nfs" -a "$_ROOTFS_TYPE" != "romfs" -a "$_ROOTFS_PASSNO" != 0 -a -e $_ROOTFS_DEVICE ]; then | |
367 | show "Checking root filesystem"; started | |
368 | initlog -c "fsck -C -T -a $fsckoptions /" | |
369 | ||
370 | rc=$? | |
371 | ||
372 | # A return of 4 or higher means there were serious problems. | |
373 | if [ $rc -gt 3 ]; then | |
374 | [ -e /proc/splash ] && echo "verbose" > /proc/splash | |
375 | # don't use '\n' in nls macro ! | |
376 | echo | |
377 | echo | |
378 | nls "*** An error occurred during the file system check." | |
379 | nls "*** Dropping you to a shell; the system will reboot" | |
380 | nls "*** when you leave the shell." | |
381 | echo | |
382 | ||
383 | PS1="`nls '(Repair filesystem)# '`"; export PS1 | |
384 | [ "$SELINUX" = "1" ] && disable_selinux | |
385 | if ! is_no "$RUN_SULOGIN_ON_ERR"; then | |
386 | /sbin/sulogin | |
387 | else | |
388 | /bin/sh | |
389 | fi | |
390 | ||
391 | run_cmd "Unmounting file systems" umount -a | |
392 | mount -n -o remount,ro / | |
393 | run_cmd "Automatic reboot in progress" reboot | |
394 | # A return of 2 or 3 means that filesystem was repaired but we need | |
395 | # to reboot. | |
396 | elif [ "$rc" = "2" -o "$rc" = "3" ]; then | |
397 | [ -e /proc/splash ] && echo "verbose" > /proc/splash | |
398 | echo | |
399 | nls "*** Filesystem was repaired but system needs to be" | |
400 | nls "*** rebooted before mounting it." | |
401 | nls "*** REBOOTING ***" | |
402 | echo | |
403 | ||
404 | run_cmd "Unmounting file systems" umount -a | |
405 | mount -n -o remount,ro / | |
406 | run_cmd "Automatic reboot in progress" reboot | |
407 | elif [ "$rc" = "1" ]; then | |
408 | _RUN_QUOTACHECK=1 | |
409 | fi | |
410 | fi | |
411 | ||
412 | # Check for arguments | |
413 | if strstr "$cmdline" nopnp; then | |
414 | PNP= | |
415 | else | |
416 | PNP=yes | |
417 | fi | |
418 | ||
419 | # set up pnp and kernel pnp | |
420 | if [ -n "$PNP" ]; then | |
421 | if ! is_no "$RUN_USERPNP" && [ -x /sbin/isapnp -a -f /etc/isapnp/isapnp.conf ]; then | |
422 | run_cmd "Setting up ISA PNP devices (userspace pnp)" /sbin/isapnp /etc/isapnp/isapnp.conf | |
423 | fi | |
424 | if ! is_no "$RUN_KERNELPNP"; then | |
425 | /sbin/modprobe -k isa-pnp 2> /dev/null | |
426 | if [ -e /proc/isapnp -a -f /etc/isapnp/isapnp-kernel.conf ]; then | |
427 | show "Setting up ISA PNP devices (kernelspace pnp)"; busy | |
428 | grep -v "^#" /etc/isapnp/isapnp-kernel.conf 2>/dev/null >/proc/isapnp && (deltext; ok) || (deltext; fail) | |
429 | fi | |
430 | fi | |
431 | fi | |
432 | ||
433 | _ROOTFS_RO=$(awk '($1 !~ /^#/ && $2 == "/" && ($4 == "ro" || $4 ~ /,ro$/ || $4 ~ /^ro,/ || $4 ~ /,ro,/ ) && NF >= 6) { print "ro" }' /etc/fstab) | |
434 | # Remount the root filesystem read-write | |
435 | if [ -z "$_ROOTFS_RO" ]; then | |
436 | run_cmd "Remounting root filesystem in rw mode" mount -n -o remount,rw / | |
437 | fi | |
438 | ||
439 | # Update quotas if fsck was run on / | |
440 | if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then | |
441 | run_cmd "Checking root filesystem quotas" /sbin/quotacheck -vnug / | |
442 | fi | |
443 | ||
444 | # Clean up SELinux labels | |
445 | if [ -n "$SELINUX" ]; then | |
446 | for file in /etc/mtab /etc/cryptomtab /etc/ld.so.cache ; do | |
447 | [ -r $file ] && restorecon $file >/dev/null 2>&1 | |
448 | done | |
449 | fi | |
450 | ||
451 | if [ -f /etc/crypttab ] && ! is_empty_file /etc/crypttab; then | |
452 | # XXX, this must be probably done after random is initialized from /var/run/random-seed | |
453 | show "Starting disk encryption using the RNG" | |
454 | init_crypto 1 && ok || fail | |
455 | fi | |
456 | else | |
457 | # Start logging console output since we have all /dev stuff setup | |
458 | if [ "$RC_BOOTLOG" ]; then | |
459 | /sbin/blogd -q | |
460 | fi | |
461 | fi | |
462 | ||
463 | # Remove stale backups | |
464 | rm -f /etc/mtab~ /etc/mtab~~ /etc/cryptomtab~ /etc/cryptomtab~~ >/dev/null 2>&1 | |
465 | ||
466 | # Remove /etc/nologin when starting system | |
467 | [ -f /etc/nologin.boot ] && rm -f /etc/nologin /etc/nologin.boot | |
468 | ||
469 | if ! is_no "$DELAY_LOGIN" && [ ! -f /etc/nologin ]; then | |
470 | show "Enabling Delay Login"; busy | |
471 | echo > /etc/nologin | |
472 | nls "System bootup in progress - please wait" >> /etc/nologin | |
473 | echo >> /etc/nologin | |
474 | chmod 644 /etc/nologin | |
475 | cp -fp /etc/nologin /etc/nologin.boot | |
476 | ok | |
477 | fi | |
478 | ||
479 | # The root filesystem is now read-write, so we can now log via | |
480 | # syslog() directly... | |
481 | if [ -n "$IN_INITLOG" ]; then | |
482 | IN_INITLOG="" | |
483 | fi | |
484 | ||
485 | if ! is_yes "$VSERVER"; then | |
486 | # Clear mtab | |
487 | :>/etc/mtab | |
488 | [ -f /etc/cryptomtab ] && :>/etc/cryptomtab | |
489 | ||
490 | # Enter root, /proc, /sys and other into mtab. | |
491 | mount -f / | |
492 | mount -f /proc | |
493 | if is_fsmounted usbfs /proc/bus/usb; then | |
494 | mount -f -t usbfs -o devgid=78,devmode=664 usbfs /proc/bus/usb | |
495 | fi | |
496 | ||
497 | if is_fsmounted sysfs /sys; then | |
498 | mount -f -t sysfs sysfs /sys | |
499 | if is_fsmounted securityfs /sys/kernel/security ; then | |
500 | mount -f -t securityfs securityfs /sys/kernel/security | |
501 | fi | |
502 | fi | |
503 | ||
504 | if is_fsmounted selinuxfs /selinux; then | |
505 | mount -f -t selinuxfs selinuxfs /selinux | |
506 | fi | |
507 | ||
508 | if is_fsmounted cgroup /dev/cpuset; then | |
509 | mount -f -t cgroup -o cpuset,noprefix none /dev/cpuset | |
510 | elif is_fsmounted cpuset /dev/cpuset; then | |
511 | mount -f -t cpuset none /dev/cpuset | |
512 | fi | |
513 | ||
514 | if [ ! -f /proc/modules ]; then | |
515 | USEMODULES= | |
516 | elif ! strstr "$cmdline" nomodules; then | |
517 | USEMODULES=y | |
518 | else | |
519 | USEMODULES= | |
520 | fi | |
521 | ||
522 | uname_r=$(uname -r) | |
523 | # Adjust symlinks as necessary in /boot to keep system services from | |
524 | # spewing messages about mismatched System maps and so on. | |
525 | if ! is_no "$SET_SLINKS"; then | |
526 | if [ -L /boot/System.map -a -r /boot/System.map-$uname_r ] ; then | |
527 | ln -s -f System.map-$uname_r /boot/System.map | |
528 | fi | |
529 | if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then | |
530 | ln -s -f System.map-$uname_r /boot/System.map | |
531 | fi | |
532 | fi | |
533 | ||
534 | # Run depmod if RUN_DEPMOD != "no" and: | |
535 | # a) user requested or RUN_DEPMOD=""; | |
536 | # b) modules.dep is missing | |
537 | if ! is_no "$RUN_DEPMOD" && [ -n "$USEMODULES" ]; then | |
538 | if is_yes "$RUN_DEPMOD" || [ -z "$RUN_DEPMOD" ]; then | |
539 | run_cmd "Finding module dependencies" depmod -a | |
540 | elif [ "$RUN_DEPMOD" = "ifmissing" ] && [ ! -f /lib/modules/$uname_r/modules.dep ]; then | |
541 | run_cmd "Finding module dependencies" depmod -A | |
542 | fi | |
543 | fi | |
544 | unset uname_r | |
545 | ||
546 | if [ -f /proc/sys/kernel/modprobe ]; then | |
547 | if [ -n "$USEMODULES" ]; then | |
548 | sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1 | |
549 | else | |
550 | # We used to set this to NULL, but that causes | |
551 | # 'failed to exec' messages" | |
552 | sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1 | |
553 | fi | |
554 | fi | |
555 | ||
556 | # Load usb storage here, to match most other things | |
557 | if [ -n "$needusbstorage" ]; then | |
558 | modprobe -k usb-storage >/dev/null 2>&1 | |
559 | fi | |
560 | ||
561 | # Load firewire devices | |
562 | if ! strstr "$cmdline" nofirewire; then | |
563 | aliases=$(/sbin/modprobe -c | awk '/^alias ieee1394-controller/ { print $3 }') | |
564 | if [ -n "$aliases" -a "$aliases" != "off" ] ; then | |
565 | for alias in $aliases ; do | |
566 | [ "$alias" = "off" ] && continue | |
567 | run_cmd "$(nls 'Initializing firewire controller') ($alias)" /sbin/modprobe $alias | |
568 | done | |
569 | LC_ALL=C grep -E "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && /sbin/modprobe -s sbp2 > /dev/null 2>&1 | |
570 | fi | |
571 | fi | |
572 | ||
573 | # Load sound modules if they need persistent DMA buffers | |
574 | if [ $(kernelverser) = "002006" ]; then | |
575 | MODULES_CONF=/etc/modprobe.conf | |
576 | elif [ -r /etc/modules.conf ]; then | |
577 | MODULES_CONF=/etc/modules.conf | |
578 | else | |
579 | MODULES_CONF=/etc/conf.modules | |
580 | fi | |
581 | ||
582 | if grep -q "^options sound dmabuf=1" "$MODULES_CONF" 2>/dev/null ; then | |
583 | RETURN=0 | |
584 | alias=$(/sbin/modprobe -c | grep -sE "^alias[[:space:]]+sound[[:space:]]+" 2>/dev/null | awk '{ print $3 }') | |
585 | if [ -n "$alias" -a "$alias" != "off" ] ; then | |
586 | run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias | |
587 | RETURN=$? | |
588 | fi | |
589 | alias=$(/sbin/modprobe -c | grep -sE "^alias[[:space:]]+sound-slot-0[[:space:]]+" 2>/dev/null | awk '{ print $3 }') | |
590 | if [ -n "$alias" -a "$alias" != "off" ] ; then | |
591 | run_cmd "$(nls 'Loading sound module') ($alias)" modprobe -s $alias | |
592 | RETURN=$? | |
593 | fi | |
594 | fi | |
595 | ||
596 | # Load modules | |
597 | load_kernel_modules | |
598 | ||
599 | if [ -x /sbin/multipath ]; then | |
600 | # first make nodes that were discarded due (possible) new /dev mount | |
601 | modprobe -s dm-mod | |
602 | /sbin/dmsetup mknodes | |
603 | modprobe -s dm-multipath | |
604 | run_cmd "Activating dm-multipath" /sbin/multipath -v 0 | |
605 | /sbin/dmsetup ls --target multipath --exec '/sbin/kpartx -a -p p' | |
606 | fi | |
607 | ||
608 | if [ -x /sbin/dmraid ]; then | |
609 | run_cmd "Activating ATARAID devices" /sbin/dmraid -ay | |
610 | fi | |
611 | ||
612 | # Find and activate volume groups: | |
613 | # EVMS | |
614 | if [ -x /sbin/evms_activate ]; then | |
615 | if [ "$(kernelverser)" -lt "002006" ]; then | |
616 | # Linux 2.4 core modules | |
617 | modprobe -s -k evms > /dev/null 2>&1 | |
618 | modprobe -s -k evms_passthru > /dev/null 2>&1 | |
619 | modprobe -s -k ldev_mgr > /dev/null 2>&1 | |
620 | modprobe -s -k dos_part > /dev/null 2>&1 | |
621 | else | |
622 | # Linux 2.6 core module | |
623 | modprobe -s -k evmscore > /dev/null 2>&1 | |
624 | fi | |
625 | ||
626 | is_yes "$EVMS_GUID_PTABLE" && modprobe -s -k gpt_part >/dev/null 2>&1 | |
627 | is_yes "$EVMS_LVM" && modprobe -s -k lvm_vge >/dev/null 2>&1 | |
628 | is_yes "$EVMS_AIX" && modprobe -s -k AIXlvm_vge >/dev/null 2>&1 | |
629 | is_yes "$EVMS_OS2" && modprobe -s -k os2lvm_vge >/dev/null 2>&1 | |
630 | run_cmd "Discovering EVMS volumes" /sbin/evms_activate | |
631 | if is_yes "$EVMS_LVM" && is_yes "$EVMS_LVM_COMPAT_NODES" ; then | |
632 | # Link nodes for compatibility with LVM | |
633 | if [ "$(echo /dev/evms/lvm/*)" != '/dev/evms/lvm/*' ] ; then | |
634 | ln -s /dev/evms/lvm/* /dev | |
635 | fi | |
636 | fi | |
637 | fi | |
638 | ||
639 | # LVM (keep in sync with LVM starting after RAID run!) | |
640 | if is_yes "$EVMS_LVM" || [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then | |
641 | lvmversion=$(LC_ALL=C /sbin/vgchange --version 2>/dev/null | awk '/LVM version:/{if ($3 >= 2) print "2"}') | |
642 | if [ "$lvmversion" = "1" ] ; then | |
643 | modprobe -s -k lvm-mod >/dev/null 2>&1 | |
644 | lvmignorelock="" | |
645 | elif [ "$lvmversion" = "2" ] ; then | |
646 | modprobe -s -k dm-mod >/dev/null 2>&1 | |
647 | lvmignorelock="--ignorelockingfailure" | |
648 | else | |
649 | modprobe -s -k lvm-mod >/dev/null 2>&1 | |
650 | # device mapper (2.5+ and patched 2.4) | |
651 | modprobe -s -k dm-mod >/dev/null 2>&1 | |
652 | lvmignorelock="" | |
653 | fi | |
654 | ||
655 | run_cmd "Scanning for LVM volume groups" /sbin/vgscan $lvmignorelock | |
656 | run_cmd "Activating LVM volume groups" /sbin/vgchange -a y $lvmignorelock | |
657 | if [ "$lvmversion" = "2" ]; then | |
658 | /sbin/vgmknodes | |
659 | # display VG statistics | |
660 | /sbin/vgdisplay -s | |
661 | fi | |
662 | fi | |
663 | ||
664 | # Add raid devices | |
665 | if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ] || [ -f /etc/raidtab ]; then | |
666 | modprobe -s md >/dev/null 2>&1 | |
667 | if [ -f /proc/mdstat ]; then | |
668 | goraidtab=1 | |
669 | golvm=0 | |
670 | rc=0 | |
671 | if [ -x /sbin/mdadm -a -f /etc/mdadm.conf ]; then | |
672 | if (grep -qE "^([[:blank:]]|)ARRAY[[:blank:]]" /etc/mdadm.conf 2>/dev/null); then | |
673 | run_cmd "Starting up RAID devices" /sbin/mdadm --assemble --scan --auto=yes | |
674 | rc=$? | |
675 | [ "$rc" -eq 0 ] && goraidtab=0 && golvm=1 | |
676 | fi | |
677 | fi | |
678 | ||
679 | if [ -f /etc/raidtab -a "$goraidtab" -eq 1 ]; then | |
680 | for i in $(awk '!/^#/ && /raiddev/{print $2}' /etc/raidtab 2>/dev/null); do | |
681 | golvm=1 | |
682 | RAIDDEV=$(basename $i) | |
683 | RAIDSTAT=$(grep "^$RAIDDEV : active" /proc/mdstat 2>/dev/null) | |
684 | show "Starting up RAID device %s" $RAIDDEV | |
685 | busy | |
686 | if [ -z "$RAIDSTAT" ]; then | |
687 | # Try raidstart first...if that fails then | |
688 | # fall back to raid0run and if that fails too | |
689 | # fall back to raidadd, raidrun. | |
690 | RESULT=1 | |
691 | if [ -x /sbin/raidstart ]; then | |
692 | /sbin/raidstart $i | |
693 | RESULT=$? | |
694 | fi | |
695 | if [ $RESULT -gt 0 -a -x /sbin/raid0run ]; then | |
696 | /sbin/raid0run $i | |
697 | RESULT=$? | |
698 | fi | |
699 | if [ $RESULT -gt 0 -a -x /sbin/raidadd -a -x /sbin/raidrun ]; then | |
700 | /sbin/raidadd $i | |
701 | /sbin/raidrun $i | |
702 | RESULT=$? | |
703 | fi | |
704 | if [ $RESULT -gt 0 ]; then | |
705 | rc=1 | |
706 | fail | |
707 | else | |
708 | ok | |
709 | fi | |
710 | else | |
711 | ok | |
712 | fi | |
713 | done | |
714 | fi | |
715 | ||
716 | # A non-zero return means there were problems | |
717 | if [ $rc -gt 0 ]; then | |
718 | [ -e /proc/splash ] && echo "verbose" > /proc/splash | |
719 | show "Starting up RAID devices"; fail | |
720 | echo | |
721 | echo | |
722 | nls "*** An error occurred during the RAID startup." | |
723 | nls "*** Dropping you to a shell; the system will reboot" | |
724 | nls "*** when you leave the shell." | |
725 | echo | |
726 | ||
727 | PS1="$(nls '(RAID Repair)# ')"; export PS1 | |
728 | [ "$SELINUX" = "1" ] && disable_selinux | |
729 | if ! is_no "$RUN_SULOGIN_ON_ERR"; then | |
730 | /sbin/sulogin | |
731 | else | |
732 | /bin/sh | |
733 | fi | |
734 | ||
735 | run_cmd "Unmounting file systems" umount -a | |
736 | run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro / | |
737 | run_cmd "Automatic reboot in progress" reboot | |
738 | fi | |
739 | # LVM on RAID (keep in sync with LVM setting few lines above) | |
740 | if [ "$golvm" -eq "1" ]; then | |
741 | if is_yes "$EVMS_LVM" || [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then | |
742 | run_cmd "Scanning for LVM volume groups (on RAID)" /sbin/vgscan $lvmignorelock | |
743 | run_cmd "Activating LVM volume groups (on RAID)" /sbin/vgchange -a y $lvmignorelock | |
744 | [ "$lvmversion" = "2" ] && /sbin/vgmknodes | |
745 | fi | |
746 | fi | |
747 | show "Starting up RAID devices"; ok | |
748 | fi | |
749 | fi | |
750 | ||
751 | _RUN_QUOTACHECK=0 | |
752 | # Check filesystems | |
753 | if [ -z "$fastboot" ] && ! strstr "$cmdline" nofsck; then | |
754 | rc_splash "fsck start" | |
755 | show "Checking filesystems"; started | |
756 | initlog -c "fsck -C -T -R -A -a -P $fsckoptions" | |
757 | ||
758 | rc=$? | |
759 | ||
760 | # A return of 2 or higher means there were serious problems | |
761 | if [ $rc -gt 1 ]; then | |
762 | [ -e /proc/splash ] && echo "verbose" > /proc/splash | |
763 | echo | |
764 | echo | |
765 | nls "*** An error occurred during the file system check." | |
766 | nls "*** Dropping you to a shell; the system will reboot" | |
767 | nls "*** when you leave the shell." | |
768 | echo | |
769 | ||
770 | PS1="$(nls '(Repair filesystem)# ')"; export PS1 | |
771 | [ "$SELINUX" = "1" ] && disable_selinux | |
772 | if ! is_no "$RUN_SULOGIN_ON_ERR"; then | |
773 | /sbin/sulogin | |
774 | else | |
775 | /bin/sh | |
776 | fi | |
777 | ||
778 | run_cmd "Unmounting file systems" umount -a | |
779 | run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro / | |
780 | run_cmd "Automatic reboot in progress" reboot | |
781 | elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then | |
782 | _RUN_QUOTACHECK=1 | |
783 | fi | |
784 | rc_splash "fsck stop" | |
785 | fi | |
786 | ||
787 | # Mount all other filesystems (except for NFS and /proc, which is already | |
788 | # mounted). Contrary to standard usage, | |
789 | # filesystems are NOT unmounted in single user mode. | |
790 | ||
791 | run_cmd "Mounting local filesystems" mount -a -t nonfs,nfs4,smbfs,ncpfs,proc,cifs -O no_netdev | |
792 | ||
793 | # now we have /usr mounted, recheck if we have gettext and tput available. | |
794 | if is_no "$TPUT"; then | |
795 | GETTEXT= | |
796 | TPUT= | |
797 | rc_gettext_init | |
798 | fi | |
799 | ||
800 | # Now do some workaround - encrypted filesystems couldn't have been fsck-ed | |
801 | # before mount - that's where the password is entered. | |
802 | # mount is buggy - when remounting loopback filesystem, loop=XXX | |
803 | # option is removed from /etc/mtab | |
804 | if [ -z "$fastboot" ] && grep "^[^#].*encryption=" /etc/fstab 2>/dev/null | grep -v -q "noauto" 2>/dev/null; then | |
805 | show "Checking encrypted filesystems"; started | |
806 | LOOPLIST="$(LC_ALL=C awk ' | |
807 | FILENAME=="/proc/mounts" { | |
808 | TAB[$2]=$1; | |
809 | } | |
810 | FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && /[^a-zA-Z_]ro[^a-zA-Z_]/ { | |
811 | if ($2 in TAB){print TAB[$2];} | |
812 | } | |
813 | FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ { | |
814 | if ($2 in TAB){print TAB[$2];} | |
815 | sub("loop(=[^,]*)?","loop=" TAB[$2] ",ro",$4); | |
816 | cmd="mount " $2 " -o remount," $4; | |
817 | system(cmd); | |
818 | } | |
819 | ' /proc/mounts /etc/fstab)" | |
820 | initlog -c "fsck -T -C -a $fsckoptions $LOOPLIST" | |
821 | rc=$? | |
822 | ||
823 | # A return of 2 or higher means there were serious problems. | |
824 | if [ $rc -gt 1 ]; then | |
825 | [ -e /proc/splash ] && echo "verbose" > /proc/splash | |
826 | echo | |
827 | echo | |
828 | nls "*** An error occurred during the file system check." | |
829 | nls "*** Dropping you to a shell; the system will reboot" | |
830 | nls "*** when you leave the shell." | |
831 | echo | |
832 | ||
833 | PS1="$(nls '(Repair filesystem)# ')"; export PS1 | |
834 | [ "$SELINUX" = "1" ] && disable_selinux | |
835 | if ! is_no "$RUN_SULOGIN_ON_ERR"; then | |
836 | /sbin/sulogin | |
837 | else | |
838 | /bin/sh | |
839 | fi | |
840 | ||
841 | run_cmd "Unmounting file systems" umount -a | |
842 | run_cmd "Remounting root filesystem in ro mode" mount -n -o remount,ro / | |
843 | run_cmd "Automatic reboot in progress" reboot | |
844 | elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then | |
845 | _RUN_QUOTACHECK=1 | |
846 | fi | |
847 | ||
848 | show "Remounting encrypted filesystems back in rw mode"; busy | |
849 | awk ' | |
850 | FILENAME=="/proc/mounts" { | |
851 | TAB[$2]=$1; | |
852 | } | |
853 | FILENAME=="/etc/fstab" && /encryption=/ && ! /noauto/ && ! /[^a-zA-Z_]ro[^a-zA-Z_]/ { | |
854 | sub("loop(=[^,]*)?","loop=" TAB[$2] ",rw",$4); | |
855 | cmd="mount " $2 " -o remount," $4; | |
856 | system(cmd); | |
857 | } | |
858 | ' /proc/mounts /etc/fstab | |
859 | ok | |
860 | fi | |
861 | ||
862 | # /var/log should be writable now, so start saving the boot output | |
863 | if [ "$RC_BOOTLOG" ]; then | |
864 | echo > /var/log/boot.msg | |
865 | killall -IO blogd | |
866 | fi | |
867 | ||
868 | if [ "$_RUN_QUOTACHECK" = "1" -a -x /sbin/quotacheck ]; then | |
869 | run_cmd "Checking filesystem quotas" /sbin/quotacheck -vnugRa | |
870 | fi | |
871 | ||
872 | # Turn on quota | |
873 | if [ -x /sbin/quotaon ]; then | |
874 | run_cmd "Turning on quotas for local filesystems" /sbin/quotaon -aug | |
875 | fi | |
876 | ||
877 | # Turn on process accounting | |
878 | if [ -x /etc/rc.d/rc.acct ]; then | |
879 | /etc/rc.d/rc.acct start | |
880 | fi | |
881 | ||
882 | # Set the clock if timezone definition wasn't available (eg. /usr not mounted) | |
883 | if is_yes "$TIME_SETUP_DELAYED" && [ -e /dev/rtc ]; then | |
884 | if run_cmd "$(nls 'Setting clock')$CLOCKDEF" /sbin/hwclock $CLOCKFLAGS; then | |
885 | show "$(nls 'Today`s date:') $(LC_CTYPE=C date)"; ok | |
886 | fi | |
887 | fi | |
888 | ||
889 | # Initialize the serial ports | |
890 | if [ -f /etc/rc.d/rc.serial ]; then | |
891 | . /etc/rc.d/rc.serial | |
892 | fi | |
893 | ||
894 | if [ -f /proc/sys/kernel/panic -a -n "$PANIC_REBOOT_TIME" -a "$PANIC_REBOOT_TIME" -gt "0" ]; then | |
895 | show 'Setting %s seconds for kernel reboot after panic' "$PANIC_REBOOT_TIME"; busy | |
896 | if (sysctl -w kernel.panic=$PANIC_REBOOT_TIME >/dev/null 2>&1); then ok; else fail; fi | |
897 | fi | |
898 | ||
899 | # ... and here finish configuring parameters | |
900 | /sbin/sysctl -e -p /etc/sysctl.conf > /dev/null 2>&1 | |
901 | else | |
902 | # /var/log should be writable now, so start saving the boot output | |
903 | if [ "$RC_BOOTLOG" ]; then | |
904 | echo > /var/log/boot.msg | |
905 | killall -IO blogd | |
906 | fi | |
907 | ||
908 | clean_vserver_mtab | |
909 | fi | |
910 | ||
911 | ||
912 | [ -n "$SELINUX" ] && [ -f /.autorelabel ] && relabel_selinux | |
913 | ||
914 | # Clean up /. | |
915 | rm -f /fastboot /fsckoptions /forcefsck /halt /poweroff >/dev/null 2>&1 | |
916 | ||
917 | # Clean up /var | |
918 | # /usr could be still not mounted if it is on NFS. | |
919 | for afile in /var/lock/* /var/run/*; do | |
920 | bafile=${afile##*/} | |
921 | if [ -d "$afile" ]; then | |
922 | case $bafile in | |
923 | news|sudo|mon|cvs) | |
924 | ;; | |
925 | *) | |
926 | echo $afile/* | xargs rm -rf | |
927 | ;; | |
928 | esac | |
929 | else | |
930 | [ "$bafile" != "hwprofile" ] && rm -f $afile 2> /dev/null | |
931 | fi | |
932 | done | |
933 | ||
934 | # Delete stale files | |
935 | rm -f /var/lib/rpm/__db* /var/spool/postoffice/.pid.* /tmp/.X*-lock \ | |
936 | /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.* | |
937 | rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \ | |
938 | /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \ | |
939 | /tmp/scrollkeeper-* /tmp/ssh-* | |
940 | ||
941 | { | |
942 | # Clean up utmp/wtmp | |
943 | if ! is_no "$NEED_XFILES"; then | |
944 | :>/var/run/utmpx | |
945 | touch /var/log/wtmpx | |
946 | chown root:utmp /var/run/utmpx /var/log/wtmpx | |
947 | chmod 0664 /var/run/utmpx /var/log/wtmpx | |
948 | else | |
949 | :>/var/run/utmp | |
950 | touch /var/log/wtmp | |
951 | chown root:utmp /var/run/utmp /var/log/wtmp | |
952 | chmod 0664 /var/run/utmp /var/log/wtmp | |
953 | fi | |
954 | ||
955 | # Clean /tmp | |
956 | if is_yes "$CLEAN_TMP"; then | |
957 | # XXX LC_ALL needed here | |
958 | rm -rf /tmp/* /tmp/.[a-zA-Z0-9]* | |
959 | fi | |
960 | ||
961 | # System protected dirs | |
962 | mkdir -m 1777 -p /tmp/.ICE-unix > /dev/null 2>&1 | |
963 | chown root:root /tmp/.ICE-unix | |
964 | [ -n "$SELINUX" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1 | |
965 | ||
966 | if ! is_yes "$VSERVER"; then | |
967 | run_cmd "Enabling swap space" /bin/true | |
968 | # Right, now turn on swap in case we swap to files | |
969 | swapon -a >/dev/null 2>&1 | |
970 | ||
971 | # If a SCSI tape has been detected, load the st module unconditionally | |
972 | # since many SCSI tapes don't deal well with st being loaded and unloaded | |
973 | if [ -f /proc/scsi/scsi ] && grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then | |
974 | if grep -qv ' 9 st' /proc/devices 2>/dev/null; then | |
975 | if [ -n "$USEMODULES" ] ; then | |
976 | # Try to load the module. If it fails, ignore it... | |
977 | insmod -p st >/dev/null 2>&1 && modprobe -s st >/dev/null 2>&1 | |
978 | fi | |
979 | fi | |
980 | fi | |
981 | ||
982 | # Now that we have all of our basic modules loaded and the kernel going, | |
983 | # let's dump the syslog ring somewhere so we can find it later | |
984 | dmesg > /var/log/dmesg | |
985 | i=5 | |
986 | while [ $i -ge 0 ]; do | |
987 | if [ -f /var/log/dmesg.$i ]; then | |
988 | chmod 0600 /var/log/dmesg.$i | |
989 | mv -f /var/log/dmesg.$i /var/log/dmesg.$(($i+1)) | |
990 | fi | |
991 | i=$(($i-1)) | |
992 | done | |
993 | cp -f /var/log/dmesg /var/log/dmesg.0 | |
994 | chmod 0600 /var/log/dmesg /var/log/dmesg.0 | |
995 | fi | |
996 | ||
997 | kill -TERM $(/sbin/pidof getkey) >/dev/null 2>&1 | |
998 | } & | |
999 | ||
1000 | # extra check if the background process we just spawned is still running, | |
1001 | # as in case of vserver bootup it finishes quite instantly. | |
1002 | if ! is_no "$RC_PROMPT" && [ -d /proc/$! ]; then | |
1003 | /sbin/getkey -c 5 i && touch /var/run/confirm | |
1004 | fi | |
1005 | wait | |
1006 | echo |